TOTAL QUARTZ INEO FDE 0W-30
Engine oil
K E Y D ATA
LIGHT VEHICLE RANGE INTERNATIONAL STANDARDS
ACEA C2
GASOLINE & DIESEL ENGINE OIL MANUFACTURER APPROVALS1
SAE 0W-30
FORD WSS-M2C950-A
ADVANCED SYNTHETIC TECHNOLOGY
STJLR.03.5007
LOW SAPS & FUEL ECONOMY
1
Please refer to car owner’s manual
TECHNOLOGY
Age-Resistance technology
The next gen oil for outstanding protection.
Age-Resistance technology provides expert protection, to fight everyday challenges in the
long term.
Age-Resistance technology offers unbeatable engine protection. It's unique combination
of hyperactive molecules creates a strong thick oil film on all concerned engine parts.
Engines are absolutely protected against a variety of challenges, from wear to oil oxidation
even at extreme temperatures.
A P P L I C A T I O NS
TOTAL QUARTZ INEO FDE 0W-30 with Age-Resistance Technology is a highly charged formula which fortifies
the anti-oxidation properties of the engine oil, offering enhanced protection against sludge formation, corrosion
and wear caused by friction.
This high-performance, latest generation, synthetic engine oil with outstanding Fuel Economy properties is
suitable for the latest generation of gasoline and Diesel engines respecting the EURO V and EURO VI norms.
TOTAL QUARTZ INEO FDE 0W-30 is specially formulated to answer to the stringent needs of the latest FORD
diesel engines requiring a 0W-30 lubricant and the specification WSS-M2C950-A.
CUSTOMERS BENEFITS
Extended engine lifetime: Ensures outstanding engine longevity, thanks to its magnified oxidation
resistance.
Excellent engine cleanliness and protection: Ensures optimum engine cleanliness, thanks to its superior
detergent and dispersion properties.
Enhanced wear protection: Confers an excellent global wear protection to engines, thanks to its
sophisticated combination of cutting-edge additives and base oils.
Protection of Diesel Particulate Filter: Enables, thanks to low rates of sulfur, ashes and phosphorus (low
SAPS), a durability of post-treatment systems (in particular the DPF) that enables high reduction of pollutant
emissions.
Improved cold start properties: This lubricant make cold starts easier, even at very low temperatures.
CHARACTERISTICS2
TEST UNIT TEST METHOD RESULT
Viscosity grade - SAE J300 0W-30
Kinematic viscosity at 40°C mm²/s ASTM D445 45
Kinematic viscosity at 100°C mm²/s ASTM D445 9.5
Density at 15°C kg/m3 ASTM D4052 842
Viscosity index - ASTM D2270 200
Pour point °C NF T 60 105 -45
OC Flash point °C NF EN ISO 2592 232
2
The characteristics given above are obtained with a standard tolerance threshold during production and may not be considered specifications.
R E C O M M E N D AT I O N S F O R U S E
Before using the product, the vehicle's maintenance guide should be checked. Oil changes should be carried
out in accordance with the manufacturer's recommendations.
The product should not be stored at temperatures over 60°C. It should be kept away from sunlight, intense
cold and extreme temperature fluctuations. If possible, the packaging should not be exposed to the elements.
Otherwise, the drums should be laid horizontally in order to avoid any contamination from water and to prevent
the product's label from rubbing off.
H E A LT H , S A F E T Y A N D T H E E N V I R O N M E N T
Based on the toxicological information available, this product should not cause any adverse health effects,
provided it is used for its intended purpose and in accordance with the recommendations laid out in the Safety
Data Sheet (SDS).
This can be obtained on request from your local reseller and is available for consultation at
http://sdstotalms.total.com.
This product should not be used for any purposes other than the ones for which it is intended.
TOTAL LUBRIFIANTS – Immeuble Spazio TOTAL QUARTZ INEO FDE 0W-30
562, avenue du Parc de l’île Last update of this datasheet: 09/2020
92029 Nanterre cedex
France
Some variations can be expected under normal production conditions, but these should not affect the product’s expected performance
irrespective of the site. The information contained in this document is subject to change without notice. Our products can be viewed
on our website at www.lubricants.total.com.
