HOW PROPORTIONAL REPRESENTATION
ELECTIONS WORK
Douglas J. Amy
The Basic Principles of PR
The basic principles underlying proportional representation elections are that all voters deserve
representation and that all political groups in society deserve to be represented in our legislatures
in proportion to their strength in the electorate. In other words, everyone should have the right to
fair representation.
In order to achieve this fair representation, all PR systems have certain basic characteristics --
characteristics that set them apart from our current election system. First, they all use multi-
member districts. Instead of electing one person in each district, as we do here in the U.S.,
several people are elected. These multi-member districts may be relatively small, with only three
or four members, or they may be larger, with ten or more members. (The figures below illustrate
districting maps for a hypothetical 50-person state senate. Figure 1 shows 50 single-seat
districts, as is common with plurality-majority systems. Figure 2 depicts 10 five-seat PR districts,
and Figure 3 shows 5 ten-seat PR districts.)
Figure 1 Figure 2 Figure 3
The second characteristic of all PR systems is that they divide up the seats in these multi-member
districts according to the proportion of votes received by the various parties or groups running
candidates. Thus if the candidates of a party win 40% of the vote in a 10 member district, they
receive four of the ten seats -- or 40% of the seats. If another party wins 20% of the vote, they
get two seats, and so on.
That, in a nutshell, is how proportional representation works. But while all PR systems have the
same goals of ensuring that all voters receive some representation and that all groups are
represented fairly, various systems do have different ways of achieving these goals. So it is
helpful to see how different kinds of PR systems work in practice.
Types of PR Systems
Party List Voting
Party list voting systems are by far the most common form of proportional representation. Over
80% of the PR systems used worldwide are some form of party list voting. It remains the system
used in most European democracies and in many newly democratized countries, including South
Africa.
How It Works. Legislators are elected in large, multi-member districts. Each party puts up a list
or slate of candidates equal to the number of seats in the district. Independent candidates may
also run, and they are listed separately on the ballot as if they were their own party (see below).
On the ballot, voters indicate their preference for a particular party and the parties then receive
seats in proportion to their share of the vote. So in a five-member district, if the Democrats win
40% of the vote, they would win two of the five seats. The two winning Democratic candidates
would be chosen according to their position on the list.
There are two broad types of list systems: closed list and open list. In a closed list system--the
original form of party list voting--the party fixes the order in which the candidates are listed and
elected, and the voter simply casts a vote for the party as a whole. This is shown in the first ballot
below, which illustrates an election for the House of Representatives in a five-seat district.
Voters are not able to indicate their preference for any candidates on the list, but must accept the
list in the order presented by the party. Winning candidates are selected in the exact order they
appear on the original list. So in the example here, if the Democrats won two seats, the first two
candidates on the pre-ordered list--Foster and Rosen-Amy--would be elected.
Closed Party List Ballot
Most European democracies now use the open list form of party list voting. This approach allows
voters to express a preference for particular candidates, not just parties. It is designed to give
voters some say over the order of the list and thus which candidates get elected. One version of
this is illustrated in the ballot below. Voters are presented with unordered or random lists of
candidates chosen in party primaries. Voters cannot vote for a party directly, but must cast a vote
for an individual candidate. This vote counts for the specific candidate as well as for the party.
So the order of the final list completely depends on the number of votes won by each candidate
on the list. The most popular candidates rise to the top of the list and have a better chance of
being elected. In our example, if the Democrats won 2 seats, and Volz and Gentzler received the
highest and next highest number of individual votes, they would rise to the top of the list and be
elected. This example is similar to the system used in Finland and widely considered to be the
most open version of list voting.
Open Party List Ballot
A variety of different formulas exist for accomplishing the actual allocation of seats to the
parties. One of the simplest seat allocation formulas is the called the "largest remainder formula."
In this approach, the first step is to calculate a quota, which is determined by taking the total
number of valid votes in the district and dividing this by the number of seats. In the example in
the table below, 100,000 votes were cast and ten seats are to be filled. 100,000/10 = 10,000 –
which is the quota. The quota is then divided into the vote that each party receives and the party
wins one seat for each whole number produced. So the Republican party received 38,000 votes,
which is divided by 10,000 to produce three seats – with a remainder of 8,000. After this first
allocation of seats is complete than the remainder numbers for the parties are compared and the
parties with the largest remainders are allocated the remaining seats. In our example, two seats
remain to be allocated and the Republicans and Moll, the independent candidate, have the largest
remainders, so they get the seats. Ultimately all the parties end up with the number of seats that
as closely as possible approximates their percentage of the vote.
Largest Remainder Approach to Seat Allocation
Mixed-Member Proportional Voting
Mixed-member proportional representation goes by a variety of other names, including "the
additional member system," "compensatory PR," the "two vote system," and "the German
system." It is an attempt to combine a single-member district system with a proportional voting
system. Half of the members of the legislature are elected in single-member district plurality
contests. The other half are elected by a party list vote and added on to the district members so
that each party has its appropriate share of seats in the legislature. Proponents claim that mixed-
member proportional voting (MMP) is the best of both worlds: providing the geographical
representation and close constituency ties of single-member plurality voting along with the
fairness and diversity of representation that comes with PR voting.
This system was originally invented in West Germany right after World War Two, though since
then it has also been adopted in several other countries, including Bolivia and Venezuela. It is
still one of the least used PR systems, but in recent years it has begun to garner a great deal of
attention. In fact, it is now one of the "hottest" systems being considered by those involved in
electoral design. In part this growing attention is a result of MMP’s unique claim to be a
"compromise" between the two main rival systems. In the 1990s New Zealand abandoned its
traditional single-member plurality system for MMP. Hungary also adopted this approach. Most
recently, the newly formed parliaments of Scotland and Wales used this system for their first
elections.
How It Works. People cast votes on a double ballot--see the ballot below. First, on the left part
of the ballot, they vote for a district representative. This part of the ballot is a single-member
district plurality contest to see which person will represent the district in the legislature. The
person with the most votes wins. Typically half of the seats in the legislature are filled in this
way. So in a hypothetical 100-member state legislature, the winners of these district contests
would occupy 50 of the seats.
On the right part of the ballot--the party list portion--voters indicate their choice among the
parties, and the other half of the seats in the legislature are filled from regional lists of candidates
chosen by these parties. The party lists are closed in the German version. These party list votes
are counted on a national basis to determine the total portion of the 100-seat legislature that each
party deserves. Candidates from each party’s lists are then added to its district winners until that
party achieves its appropriate share of seats. The following table illustrates how this process
works for our hypothetical election. The Democrats won 40% of the party list votes in the 100-
member state legislature, so they would be entitled to a total of 40 of the 100 seats. Since they
already elected 28 of their candidates in district elections, they would then add 12 more from
their regional party lists to come up to their quota of 40 seats.
Allocation of Seats in MMP
In the German version two electoral thresholds are used, either of which a party must overcome
to be allotted seats in the legislature. A party must either get 5% of the nationwide party list vote
or win at least three district races in order for it to gain any seats in the legislature. In our
hypothetical case, the New Party did not win any district seats, but they did win over 5% of the
nationwide vote, so they deserve their share of legislative seats--which in this case would be six
seats, all of which would be filled from the regional party lists.
Single Transferable Vote Or Choice Voting
This system of proportional representation is known by several names. Political scientists call it
"the single transferable vote." It is called the "Hare-Clark system" in Australia. In the United
States, electoral reform activists have taken to calling it "choice voting." Currently this system is
used to elect parliaments in Ireland and Malta. In Australia it is used to elect the federal Senate,
as well as the legislatures in several states there. It is also the PR system that was used in a
number of cities in the United States during the twentieth century, including New York,
Cincinnati, Cleveland, Toledo, and Boulder. It continues to be used today in Cambridge,
Massachusetts for elections to their city council and school board.
How It Works. The voting process is illustrated by ballot below. All candidates are listed in the
same place on the ballot. Instead of voting for one person, voters rank each candidate in their
order of choice. So if you like Campbell best, you would mark the "1" after his name. If you
liked Gomez second best, you would mark "2" by his name, and so on. You can rank as few or as
many as you want. This ballot illustrates the use of the AccuVote system used in Cambridge,
Massachusetts to elect its city council and school board. Voters fill in the ranking numbers as
they would for standardized tests taken in school, which allows for computerized vote counting
and ballot transfers.
Choice Voting Ballot
As the name "single transferable vote" implies, this systems involves a process of transferring
votes. To understand how the transfer process works, it may be best to start out with a simple
analogy. Imagine a school where a class is trying to elect a committee. Any student who wishes
to run stands at the front of the class and the other students vote for their favorite candidates by
standing beside them. Students standing almost alone next to their candidate will soon discover
that this person has no chance of being elected and move to another candidate of their choice to
help him or her get elected. Some of the students standing next to a very popular candidate may
realize that this person has more than enough support to win, and decide to go stand next to
another student that they would also like to see on the committee. In the end, after all of this
shuffling around, most students would be standing next to candidates that will be elected, which
is the ultimate point of this process.
In the single transferable vote, votes are transferred around just as the students moved from
candidate to candidate in the analogy. The exact order of the transfer process is illustrated in
figure below. An example of how the votes are actually transferred is shown in the table that
follows. For the sake of simplicity, assume that there is a three-seat district in which six people
are running for office. The first step in the process is to establish the threshold: the minimum
number of votes necessary to win a seat. The threshold usually consists of the total number of
valid votes divided by one plus the number of seats to be filled, plus one vote. The formula looks
like this: Threshold = (valid votes/1+seats) +1 vote. So in our three-seat districts with 10,000
voters, a candidate would need 10,000/1+3 (which is 2,500) plus one more vote, for 2,501.
Diagram of Ballot Transfer Process
The second step is to count all the number one choices to see if any candidates have reached the
threshold of 2,501. As shown on the table below, the Democrat Gomez has 2,900 voters and he
is declared elected. But Gomez actually has 399 more votes than he needs to win. These votes
are considered wasted if they stay with Gomez, so they are transferred to the second choices on
the ballot. (There are several ways to do this, but we needn’t get into those details here.) In the
second count, we see the effect of this transfer. The other Democratic candidate, Campbell, gets
300 of those second choice votes, and the independent candidate, Daniels, gets the other 99. The
vote totals are now recalculated to see if anyone is now over the threshold. No one is, so the next
transfer takes place. The candidate with the least chance to win is eliminated and his or her votes
are transferred to their second choices. This candidate is Higgins, the Republican, and 500 of his
votes are transferred to the other Republican candidate, Dains; and the other 100 votes are given
to Daniels. Again the votes are recounted to see if anyone has reached the threshold. Dains has
reached it with 2,800 votes and so she is declared elected. Once again her excess votes are
redistributed to their second choices--200 to Graybeal, and 99 to Daniels. But still no one has
reached the threshold, so again the lowest candidate is eliminated and those votes transferred.
That candidate is Campbell, the Democrat, and 100 of his votes go to Graybeal, and 600 go to
Daniels. This puts Daniels, the independent candidate, over the threshold with 2,698 votes, and
she is the last one elected.
Ballot Count and Transfer Process
This transfer process is a bit complicated, so why does it exist? The transfer process was
invented primarily to reduce the problem of wasted votes -- votes that are cast but do not actually
elect anyone. Plurality-majority systems routinely waste large numbers of votes and this is why
they are prone to such problems as party misrepresentation, and the underrepresentation of
political minorities, racial minorities, and women. The transfer process in STV is designed to
ensure that the fewest votes are wasted and that the maximum number of people gets to elect a
representative to office. It acknowledges that there are two kinds of wasted votes: votes for
candidates that stand little chance of winning, and votes in excess of what a winning candidate
needs. Transferring these votes to their next ranked choice makes it more likely that they will
actually contribute to the election of a candidate.
