Japanese Technology since 1912

Multistage electric pumps 60Hz Product Catalogue

Japanese Technology since 1912

www.ebaraeurope.com
 EBARA Pumps Europe EBARA Pumps Europe

Multistage, multiuse,
multifunction

Multistage electric pumps are an excellent solution to guarantee high performances: the
stages that make up the hydraulic unit allow the reaching of very high pressures.
Our range is divided into two different types: vertical multistage and horizontal
multistage. Each with its own peculiarities, specific features to better adapt to a specific
application area or system, allowing it to cover a truly vast area of applications.

Domestic pressurisation and the supply of drinking water, industrial washing systems and
pressure increases, as well as heating or cooling and rainwater recovery, are all situations
that find the right product in this range. Our pumps ensure, in all these uses, reliability,
high performance and energy efficiency thanks to innovative and cutting-edge technical
solutions.

The efficiency and reliability of the multistage pumps are further improved by the
possibility of using the inverter technology systems, to be chosen between E-drive and
E-power, for an energy and economic saving of the entire system and an improvement
of environmental sustainability.

4 5
 EBARA Pumps Europe EBARA Pumps Europe

Sectors and Areas

of application

The wide choice of multistage electric pumps allows EBARA to adapt to the most disparate uses and
applications and to respond, thanks to the versatility, to the needs of a large area of residential and
industrial applications

Pressurisation Heating
For the pressurisation of water in For the circulation of water in air
residential, commercial, industrial and conditioning systems
agricultural contexts
Movement in general
Fire-fighting Industrial liquid handling in process
For the creation of fire-fighting sets applications
compliant with the European standard
UNI EN 12845 Swimming pools
Irrigation For water recirculation of swimming
To make available the water necessary pools or of sports facilities
for crops
Refrigeration towers
Washing For the circulation of water required in
For the creation of washing systems refrigeration towers
used in industry (car washing machines,
dishwashers, cleaning in place, sterilising Emptying/Filling
in place, etc.) For the emptying/filling of tanks

Air-conditioning
For the circulation of water in air
conditioning systems

6 7
 EBARA Pumps Europe EBARA Pumps Europe

Vertical multistage
U.S.g.p.m. 5 10 15 20 30 40 50 60 80 100120 160 200 250300 400 500
Imp.g.p.m. 5 10 15 20 30 40 50 60 80 100120 160 200 250300 400
400
1200

electric pumps
300 1000
H 250 800 H
[m] 700 [ft]
200
600
150 500
120 400
100 350
300
80 250
EBARA vertical multistage means high pressure, innovation and advanced technical
60 200
solutions. The pumps of this line fully comply with these aspects.
50
150
Among the multistage vertical pumps stand out the EVMS that, thanks to the exclusive 40
technical solutions adopted and the unmistakably EBARA design, represent the most 30 100
innovative series on the market.
Industrial applications represent their best field of use. 75
20
Following the MULTIGO range: the only one of the EBARA multistage in which the motor 15 50
cooling takes place thanks to the pumped liquid that makes them suitable for both in-tank 40
and surface applications. 10
Completing the series are the CVM models featuring glass fibre reinforced technopolymer 9 30

TOTAL HEAD
8 25
stages and cast iron base. 7
6 20
5
CONFIGURATIONS 4

3
"IN-LINE" TYPE 8 9 10 15 20 30 40 50 60 80 100 120 150 200 250 300 400 500 600 800 10001200 1500 Q [l/min]
Suction and 0.5 1 1.5 2 3 4 5 6 7 8 9 10 12 14 161820 25 30 40 50 60 70 100 Q [m /h]
3

discharge are
positioned on the
same axis
Model Materials Technical data
Pump body Impeller

"C" TYPE • Total head up to 300 m

EVMS: AISI 304 EVMS: AISI 304
Suction located EVMS
• Capacity up to 120 m3/h
EVMSG: cast iron EVMSG: AISI 304
at the bottom, • Maximum operating pressure:
EVMSL: AISI 316 EVMSL: AISI 316
discharge positioned 16 - 25 - 35 bar
above overlying the
aspiration
Technopolymer • Total head up to 83,5 m
MULTIGO AISI 304 reinforced with fibre • Capacity up to 7.2 m3/h
glass • Maximum operating pressure: 10 bar
"L" TYPE
Suction located
at the bottom, Technopolymer • Total head up to 106 m
discharge positioned CVM Cast iron reinforced with fibre • Capacity up to 7.2 m3/h
above radial to the glass • Maximum operating pressure: 11 bar
aspiration

8 9
 EBARA Pumps Europe EBARA Pumps Europe

EVMS
The EVMS feature a range of technical solutions that offer a revolutionary product on the market.
MULTIGO
And here's why: MULTIGO is a vertical multistage centrifugal electric pump with an outer casing, a motor cover and a
seal holder disc in AISI 304.
Technical data
NF
CO OR
E
M
ATION D

ITÉ

ACS
• Total head up to 300 m • The components of the hydraulics, i.e. impeller, diffuser and spacer, are made
SANI
ST

E AI
ATT RE

• Capacity up to 120 m3/h of polypropylene and polystyrene (PPE + PS) reinforced with glass fibres.
• Hydraulic efficiency index MEI • Constructively it presents a double mechanical seal in an oil chamber, to
> 0.7 ensure continuous lubrication and maximum reliability. Both seals, on the
• IE3 high efficiency motors motor side and on the pump side, are made of Carbon/Ceramic/EPDM.
starting from 0.75 kW • Cooling of the motor is guaranteed by the passage of the pumped fluid,
• EBARA ETM electric motors so that this pump can be used both in the surface and in the submerged
EBARA production configuration. It is precisely this feature that makes it suitable for different
from 0.75 to 11 kW
ETM motors in IE3 applications.
• Liquid temperature range:
efficiency class, • All the MULTIGO models are supplied with 5 meters of H07RN-F cable.
-30°C ÷ +140°C
starting from 0.75
• Maximum working pressure
up to 11 kW. With Technical data
16, 25 or 35 bar
the 1.5 kW size they • Total head from 83,5 to 14 m
have the PTC probe • Capacity from 1.2 to 7.2 m3/h
as standard. • Hydraulic efficiency index MEI > 0.4
• Liquid temperature up to +40°C
The cartridge-type mechanical
• Maximum suction depth: 6 m
seal allows easy maintenance.
• IP 68 protection degree
Its replacement involves a
simple operation without having
to disassemble the motor
support. The seals used are in

CVM
compliance with EN12756 and
easily available on the market if
required.
The Shurricane impeller,
patented by EBARA in AISI 316 The EBARA CVM electric pump is a vertical multistage for residential use.
steel, with its innovative shape,
ensures a reduction of the axial The vent cap, conceived and • The hydraulic components are made of glass fibre reinforced plastic, while
load that usually rests on the designed to avoid the problem the mechanical seal is made of Ceramic/Carbon/NBR.
bearings, ensuring maximum of dry running: it is in fact • The MEI hydraulic efficiency index> 0.4 and the 0.75 kW IE3 motors make
efficiency on the market and positioned specifically above them compliant with the relevant European Directives.
also allowing the use of any the level of the mechanical • To provide an even more complete product, the CVM models are also
standardised motor on the seal, to ensure the bleeding of available as standard already combined with the E-drive inverter, which
market. any air bubbles. allows the optimal setting and operation according to requirement, ensuring
Standard connection for the reduction of operating costs.
pressure sensor available for
The wide variety of quick connection, in case of Technical data
connections available presence of inverter or other • Total head from 106 to 7 m
that meet all the needs control systems. • Capacity from 1.2 to 7.2 m3/h
depending on the 3/8"loading and unloading • Hydraulic efficiency index MEI > 0.4
application, the pumped plugs as standard or suitable • IE3 high efficiency motors starting from 0.75 kW
liquid, the system on which for connecting a pressure • Liquid temperature up to +40°C
they are to be installed: gauge. • Protection with automatic re-set incorporated for the single phase models
DIN round flanges, DIN
mobile flanges, oval flanges,
Victaulic and Clamp joint.

10 11
 EBARA Pumps Europe EBARA Pumps Europe

Horizontal multistage
U.S.g.p.m. 10 15 20 30 40 50 60 70 80 90100 120 140

Imp.g.p.m. 10 15 20 30 40 50 60 70 80 90100 120

electric pumps
H 400 H
120
[m] 350 [ft]
100
300
80 250

60 200

Horizontal multistage electric pumps: the ideal solution for industrial and 50
150
residential applications where performance and reliability are required.
Two series of electric pumps are part of this line: MATRIX and COMPACT. 40

The MATRIX electric pumps, made of AISI 304 stainless steel, are suitable 30 100
for multiple uses in both the industrial and residential sectors. They have
various certifications including the WRAS and TIFQ which make them 75
suitable for drinking water. Thanks to the high operating pressure (10 bar)
20
and the renowned robustness, they are ideal for industrial applications such
as washing systems or in chillers and hydronic groups.
15 50
The COMPACT series, instead, is made of cast iron and with a
40
technopolymer impeller and is widely used in the residential sector, in
domestic pressurisation and clean water handling. This is thanks to its 10
constructive characteristics: compactness, lightness and extraordinary 9 30
quietness. 8 25

TOTAL HEAD
7
6 20

5
15 20 30 40 50 60 80 100 120 150 200 250 300 400 500 Q [l/min]

1 1.5 2 3 4 5 6 7 8 9 10 12 14 16 18 20 25 30 Q [m3/h]

Model Materials Technical data

Pump body Impeller

• Total head up to 94 m
• Capacity up to 30 m3/h
MATRIX AISI 304 AISI 304
• Maximum operating pressure
10 bar

• Total head up to 86 m
Technopolymer • Capacity from 1.2 to 7.2 m3/h
COMPACT Cast iron reinforced with • Maximum operating pressure
fibre glass 10 bar

12 13
 EBARA Pumps Europe EBARA Pumps Europe

MATRIX COMPACT
Horizontal multistage centrifugal electric pumps characterised by a sturdy Extremely silent horizontal multistage centrifugal electric pumps. Suitable
and compact construction. Available in various versions and models and for pressure increases in general, domestic pressurisation, small garden
suitable for many applications: pressure groups, water distribution and irrigation, vehicle washing and clean water handling.
treatment, heating and air conditioning, cooling and chiller, irrigation and Sturdy Sturdy
rainwater recovery, industrial washing and industrial systems. Construction • High silence Construction
• The pumps are equipped with 2-pole energy efficient asynchronous motors.
• Body, impellers, intermediate stages, seal holder disc and shaft (part in
contact with the liquid) in AISI 304. Technical Data
• The standard mechanical seal is in Ceramic/Carbon/EPDM; then there • Total head from 6,6 to 86 m
Compact Particularly
is the possibility of using different types of special seals to reach a Design • Capacity from 1.2 to 7.2 m3/h silent
temperature range from -15°C to +110°C • Maximum operating pressure 10 bar
• WRAS-certified for standard models up to 85°C. • Maximum liquid temperature 40°C
• It is possible to combine these pumps with 2 poles, self-ventilated, high • The pump body and the support are in cast iron, the outer jacket is in
efficiency asynchronous motors. AISI 304. The impeller and diffuser are made of PPE + PS reinforced with
Approvals suitable glass fibres and PTFE. The shaft is in AISI 416. Light and easy
Technical Data for drinking water • The mechanical seal is in Ceramic/Carbon/NBR to transport
• Total head up to 94 m treatment
• Capacity up to 30 m3/h
• IE3 high efficiency motors starting from 0.75 kW
• Maximum liquid temperature
from -15°C to +85°C (standard)
from -15°C to +110°C (TE version for
high temperatures)

Available, as an accessory, the insulation casing for the

pump body for use with coolant liquids or in situations where
condensation may occur

14 15
 EBARA Pumps Europe EBARA Pumps Europe

A driver EZ-finder, more than just

for your system a simple selector

Pressure or temperature variations, as well as the variation in the demand for water itself, are EZ-finder, a way to look for a model of electric pump?? Much more.
situations that commonly occur in water systems, whether this relates to heating systems or in It is the ultimate tool to find and select the right product for your needs.
general to distribution and pressurization, irrigation or industrial uses. Responding promptly to these Thanks to the logic of the selector, it is possible to search for a product in various ways: according
variations means improving the efficiency and reliability of the entire system. to the duty point, by entering the model name or by selecting the application type. Simple, the right
How does this work? EBARA provides a system that meets these needs, increases the versatility product in seconds.
of the plant and offers certain advantages: E-drive EZ-finder is the ideal tool available to the installer, the designer or the engineer.

Discover it at the link https://ezfinder.ebara.com

Combined with high efficiency motors and thanks to the design and construction of the
pump hydraulics EBARA guarantees high overall efficiency

Flexible and versatile solution depending on the system. It is possible to set the inverter
with control on the differential pressure, differential temperature and differential flow
according to the actual requirement

Remote operation control, either using the ModBus communication protocol, or via the
analogue 0-10V and digital analog inputs provided as standard.
This makes it a product that is compatible with the most modern and cutting-edge
systems, in which the interconnection of the various devices is frequently requested

SOFT START and SOFT STOP: ensures starting and stopping controlled by the motor,
increasing reliability and efficiency

It offers a multitude of standard controls, which protect the entire electric pump system:
protection against dry running , overcurrent, overvoltage, undervoltage, Pmaxprotection,
Pminprotection, etc.

16 17
 EBARA Pumps Europe EBARA Pumps Europe

Everything EBARA sales network

that you need
just a click away
EUROPE ASIA & SOUTHEAST ASIA
EBARA Pumps Europe S.p.A. EBARA Corporation EBARA Vietnam Pump Company Limited
Via Torri di Confine 2/1 int. C 11-1, Haneda Asahi-cho, Ohta-ku, Lai Cach Industrial Zone, Lai Cach Town,
36053 Gambellara (Vicenza), Italy Tokyo 144-8510, Japan Cam Giang District,

visit our website www.ebaraeurope.com

Phone +81 3 3743-6111 Hai Duong Province, Vietnam
Phone +39 0444 706811 Fax +81 3 5736 3100 Tel 84-2203-850182
Fax +39 0444 405811 www.ebara.co.jp Fax 84-2203-850180
www.ebaraeurope.com e-mail: [email protected]
EBARA Corporation Fujisawa plant www.ebarapump.com.vn/en/
Italian Sales (for order only): 4-2-1, Hon-Fujisawa, Fujisawa-shi.
e-mail: [email protected] Kanagawa 251-8502, Japan
Phone +81-466-83-8111
Export Sales (for order only): Fax +81-466-81-2164
e-mail: [email protected]
EBARA Machinery (CHINA) CO.,Ltd.
AMERICA
Technical Customer Service (TCS): Room No.303, Beijing Fortune Plaza,
e-mail: [email protected] No. 7 Dongsanhuan Zhong Road, Chaoyang District EBARA PUMPS AMERICAS CORPORATION
Phone +39 0444 706869/902/923/833 Beijing, 100020 P. R. China 1651 Cedar Line Drive

Data book
Phone 86-10-65309996 Rockhill, South Carolina 29730 U.S.A.
Marketing: Fax 86-10-6530-8968
e-mail: [email protected] Phone 803 327-5005
e-mail: [email protected]
www.ebara.cn Fax 803 327-5097
e-mail: [email protected]
Complete technical documentation to be consulted to obtain all the data EBARA Pumps Europe S.p.A. GERMANY EBARA Densan (Qingdao) Technology Co., Ltd. www.pumpsebara.com
No.88, Wangsha Road, Chengyang Qingdao,
related to the pumps Elisabeth-Selbert-Straße 2 Shandong Province, P.R.China EBARA Industrias Mecanicas
63110 Rodgau, Germany Phone 86-532-8965-3382
Phone +49 (0) 6106-660 99-0 Fax 86-532-8965-3379 & Comercio Ltda. (Brazil)
Fax +49 (0) 6106-660 99-45 www.edq-ebara.com Rua Joaquim Marques de Figueiredo, 2-31,
e-mail: [email protected] Distrito Industrial, CEP 17034-290, Bauru, SP, Brazil
EBARA-Densan Taiwan Manufacturing Co., Ltd. Phone +55 14 4009-0000
No.7, Nan-Yuen 2nd Road, Chung Li City, Fax +55 14 4009-0044
EBARA Pumps Europe S.p.A. UNITED KINGDOM

Instruction manual
Tao Yuen Hsien, Taiwan
Unit A, Park 34 Phone 886-3-451-5881 e-mail: [email protected]
Collett Way - Didcot Fax 886-3-452-7904 www.ebara.com.br/ebara/pt/index.php
Oxfordshire - OX11 7WB, United Kingdom www.ebara.com.tw
Thebe Bombas Hidraulicas S.A.
The manual with all the information needed for correct installation of our Phone +44 1895 439027 - Fax +44 1235 815770
e-mail: [email protected]
EBARA Thailand Limited
3rd Floor Achme Build. 125 Phetchburi Road
Avenida Manoel Gomes Casaca, 840 Parque Industrial,
pumps Tungphayathai, Rajthevee, Bangkok 10400, Thailand Vargem Grande do Sul City, Sao Paulo State, CEP:
13.880-970, Brazil
EBARA Pumps Europe S.p.A. FRANCE Phone 66-2-216-4935
555, Rue Juliette Recamier Fax 66-2-216-4937 Phone 55-19-3641-9100
e-mail: [email protected] Fax 55-19-3641-9114
69970 Chaponnay, France www.ebara.co.th/index.php/en/
Phone +33 4 72769482 www.thebe.com.br
Fax +33 805101071 EBARA Fluid Machinery Korea Co., Ltd.
e-mail: [email protected] 3rd Fl. Hyun-Seok Tower, 50, EBARA Bombas Colombia S.A.S.
Seolleung-Ro 93-Gil, Gangnam-Gu Autopista Medellin km 7 Celta Trade Park Bodega

Kensaku
Seoul, 135-513 Korea 02 Lote 116 Funza. Republica de Colombia
EBARA POMPY POLSKA Sp. z o.o. Phone 82 70 43621100
ul. Działkowa 115 A Phone 57-1-826-9865
Fax 82 70 82302030
02-234 Warszawa, Poland e-mail: [email protected]
a system for the selection of spare parts Phone +48 22 3909920
Fax +48 22 3909929 EBARA Pumps Philippines, Inc.
e-mail: [email protected]
Canlubang Industrial Estate,
Cabuyao 4025, Laguna, Philippines
AFRICA
Phone 0063-49-549-1806
EBARA Pumps RUS Ltd. Fax 0063-49-549-1915 EBARA PUMPS SOUTH AFRICA (PTY) LTD
Prospekt Andropov 18, building 7, floor 11 e-mail: [email protected]
www.ebaraphilippines.com.ph 26 Kyalami Boulevard,Kyalami Business Park,
115432 Moscow 1684, Midrand, Gauteng

Ez-finder
Phone +7 499 6830133 P.T. EBARA Indonesia South Africa
e-mail: [email protected] Jl. Raya Jakarta - Bogor Km. 32 Tel.: +27 11 466 1844
Desa Curug, Cimanggis-Depok Fax: +27 11 466 1933
EBARA PUMPS IBERIA, S.A. Jawa Barat, 16953 Indonesia
The correct pump selection software for every need Poligono Ind. La Estación Phone ( 62-21) 874 0852-53
Fax ( 62-21) 874 0033
C/Cormoranes 6-8
https://ezfinder.ebara.com e-mail: [email protected]
28320 Pinto (Madrid), Spain
Phone +34 916,923,630
www.ebaraindonesia.com OCEANIA
Fax +34 916,910,818 EBARA Pumps Malaysia Sdn. Bhd
e-mail: [email protected] 6, Jalan TP3, UEP Subang Jaya Industrial Park, EBARA Pumps Australia Pty. Ltd.
47620, Subang Jaya, Selangor, Malaysia. 7, Holloway Drive
Phone 603-8023 6622
Fax 603-8023 9355 Bayswater 3153 Victoria, Australia

Service
e-mail: [email protected] Phone 0061-3-97613033
MIDDLE EAST www.ebara.com.my Fax 0061-3-97613044
e-mail: [email protected]
EBARA Engineering Singapore Pte. Ltd. [email protected]
No 1, Tuas Link 2, Singapore 638550
A team of professionals at your disposal to advise you in your choice of EBARA Pumps Middle East FZE
P.O.BOX 61383 Phone 65-6862-3536 www.ebara.com.au/index.html

pump and to offer post sale assistance Jebel Ali, Dubai, UAE
Fax 65-6861-0589
e-mail: [email protected]
Phone +971 4 8838889 www.ebara.com.sg
Fax +971 4 8835307
e-mail: [email protected] EBARA MACHINERY INDIA PRIVATE LIMITED
#133, 1st Floor, Velachery Main Road, Guindy,
Chennai 600 032, India
EBARA PUMPS SAUDI ARABIA LLC Phone 91-755-0089388
St. 98, Dammam Second Industrial City, P.O.Box. 9210,
Dammam 34333, Kingdom of Saudi Arabia
Phone 966-138022014

18 19
 EBARA Pumps Europe EBARA Pumps Europe

MANAGEMENT SYSTEM
CERTIFICATE
Certificato No./Certificate No.: Data prima emissione/Initial date: Validità/Valid:
CERT-17819-2006-AQ-VEN-SINCERT 13 ottobre 2006 10 ottobre 2015 - 10 ottobre 2018

Si certifica che il sistema di gestione di/This is to certify that the management system of

EBARA PUMPS EUROPE S.p.A.

Via Pacinotti, 32 - 36040 Brendola (VI) - Italy

È conforme ai requisiti della norma per il Sistema di Gestione Qualità/

has been found to conform to the Quality Management System standard:

UNI EN ISO 9001:2008 (ISO 9001:2008)

Questa certificazione è valida This certificate is valid

per il seguente campo applicativo: for the following scope:
Progettazione, produzione, vendita e Design, manufacture, sales and trade of pumps
commercializzazione di pompe e sistemi di and pumping systems
pompaggio
(EA Sector: 18 - 17 - 14)
(Settore EA: 18 - 17 - 14)

Luogo e Data/Place and date: Per l'Organismo di Certificazione/

Vimercate, 06 agosto 2015 For the Certification Body

Vittore Marangon
Management Representative

La validità del presente Certificato è subordinata al rispetto delle condizioni contenute nel Contratto di Certificazione/
Lack of fulfilment of conditions as set out in the Certification Agreement may render this Certificate invalid.
DNV GL Business Assurance Italia S.r.l. Via Energy Park, 14, 20871 Vimercate (MB), Italy. Tel: 039 68 99 905. www.dnvgl.it/businessassurance

20 21
Japanese Technology since 1912

www.ebaraeurope.com
 EBARA Pumps Europe S.p.A. reserves the right to make changes without notice: all the specifications may be subject to change
EBARA Pumps Europe S.p.A.
Via Torri di Confine 2/1 int. C
36053 Gambellara (Vicenza), Italy
Phone +39 0444 706811
Fax +39 0444 405811
[email protected]
www.ebaraeurope.com

EBARA Corporation
479705619 05/18

11-1, Haneda Asahi-cho, Ohta-ku,

Tokyo 144-8510
Japan
Phone +81 3 6275 7598
Fax +81 3 5736 3193
www.ebara.com