NodeBFunction High-Risk Command List

Note: This sheet is part of MML Command Reference. It provides a list of high-risk commands, and running any of these co
services or severely damage This command
system reliability.isRun
used to add
these sector according to Note information. For details, see Descr
commands
equipment groups. Sector equipment
Command groups were introduced
Function for the "Mixed
ADD
Multiple RRUs In One Cell" sector. Similar
NODEBBASEBANDEQM This command is used to add NodeB
to each RRU in the Multi-RRU
PARA
ADD baseband equipment parameters.
independent demodulation cell, data of
NODEBMULTICELLGRP The
eachcommand is used to
sector equipment add local
group is cell to
ITEM multiple carrier cell group.
processed on the baseband side. That is,
ADD This command
all RRUs in the is usedsector
same to addequipment
sector
ULOCELLSECTOREQM
ADD equipment for local cell.
group and their data are allocated the
ULOCELLSECTOREQM same baseband resources and channel
GRP
ADD resources.
This command is used to add sector
ULOCELLSECTOREQM equipment to a specified sector equipment
GRPITEM group.
Use this command to block a NodeB
BLK NODEBBBRES baseband resource.
The command is used to start to block a
BLK ULOCELL specified or all the local cells
MOD This command
The command is is used
used toto modify
modify thethe load
BEAMCELLGROUP configurations
radio of downlinkof beam
networkcellload
group.
simulation
MOD This commandlocal
of a specified is used to modify
cell or all localthe
cells.
BEAMCELLGROUPITEM configurations of beam cell group item.
After starting the DL load simulation, if the
load radio is not suitable, use this
MOD DLSIM command to modify the load radio.
This command is used to modify a
MOD IUB transmission object on the Iub interface.
NODEBBASEBANDEQM This command is used to modify NodeB
PARA baseband equipment parameters.
This command is used to modify the user
MOD NODEBFUNCTION label and NodeB ID of NodeB.
The command is used to modify some of
MOD ULOCELL
the properties of the local cell.
MOD This command is used to modify sector
ULOCELLSECTOREQM equipment information of local cell.
RMV This command is used to delete beam cell
BEAMCELLGROUP group.
RMV This command is used to delete beam cell
BEAMCELLGROUPITEM group item.
This command is used to delete a
RMV IUB
transmission object on the Iub interface.
Use this command to remove an Iub
RMV IUBCP
control port.
RMV
This command is used to remove NodeB
NODEBBASEBANDEQM
baseband equipment parameters.
PARA
This command is used to remove NodeB
RMV NODEBFUNCTION
function.
RMV The command is used to delete multiple
NODEBMULTICELLGRP carrier cell group.
RMV
The command is used to delete multiple
NODEBMULTICELLGRP
carrier cell from multiple carrier cell group.
ITEM
 The command is used to cancel NodeB IP
RMV NODEBPATH
PATH.
The command is used to delete a
RMV ULOCELL
specified local cell.
RMV This command is used to delete sector
ULOCELLSECTOREQM equipment from local cell.
RMV
This command is used to remove a
ULOCELLSECTOREQM Use this command to set the base station
specified sector equipment group.
GRP
RMV This command
resource allocation is usedmodeto remove
and parameters
ULOCELLSECTOREQM specified
for sector
automatic cellequipment from a sector
reestablishment.
GRPITEM equipmentbase
Currently, group. station resources can be
The command is used to modify NodeB
SET NODEBALGPARA allocated according to handover
algorithm parameter.
SET performance or capacity. If base station
Use this command
resources are allocated to setaccording
congestion to
NODEBCONGCTRLPAR
protection parameters.
handover performance, the local cells at
A
SET
Usesame
the this command
frequencytoare setallocated
invisible tofault
the
NODEBKPIFAULTDETE
alarm-related
same processing parameters.
chip preferentially. If the
CTPARA
SET
CMB function must be configured, base
NODEBRESALLOCRUL
station resources
The command must to
is used beset allocated
the
E
SET according
This command to handover
is used performance.
to set
desensitization intensity of a specified If
the algorithm
ULOCELLALGPARA base station
parameters ofresources
a specific
cell.To match the uplink coverage arecellallocated
or all cells.
according
capability withto capacity,
the downlinkdifferent local cells
coverage
SET ULOCELLDESENS are allocated to different processing chips
capability, desensitization is applied to
preferentially,
reduce averaging
the sensitivity the number of
SET The command is usedoftothe set receiver
startR99
the base
cells
manuallyon the
by processing
adding chips.
proper The
noise to
ULOCELLR99ALGPARA Algorithm
downlink Parameters.
network load simulation of abe
station
received resource
signals. allocation mode can
specified local cell or all local
set as required. By default, base station cells.
STR DLSIM
It is mainlyare
resources used in the incipient
allocated according period
tocellof
STR The
the command
network
The command to is
test used
the to start
performance local
is used to start algorithm of the
handover performance.
reestablishment through baseband
NODEBALGSIMLTTST network.
simulation tests for fault isolation.
resource
Use optimization
this command in all the
to start local cells, a
antenna
STR REALLOCLOCELL single
port local cell, all local
co-polarization cells function
detection served by for
the
a uplink
cell. If thebaseband
detectionequipment, or all
result is consistent
STR localthecells served by theport downlink
with co-polarization mapping on
UCOPOLARPORTDET baseband equipment.
the RF channels, the UMTS 4T Beam
Optimization feature will deliver normal
performance gains.
 equipment
is, when group each time equipment
this command
The
After the the
local
configuration.
This command
cell
cell radius
for the
blocked exceeds
sector
successfully, 30 km, it is
the
is executed.
modified
group, the to To is
the
sector add used
figure more
equipment lessonly togroup,
sector
than addor sector
equal
and to
Local
DL
equipment Cell Blocked
Baseband for Equipment
theradius alarm appears.
normal of
cell, thedistributed
local cells
30 km;
sector when
equipment to thethe sector
must equipment
is
have less been than group,
or
If
in theMultiple
Local Cell ID iswith notindependent
specified, allbe the
runa the
cell,
equal multi-RRU
configured. to[MML]ADD Carrier
30inOtherwise,
km, cell
itNodeB Cell
is modified Group
execution must
toblocked,
the of figure
this
local
same. cells
demodulation, the Mixed-Multi-RRU will be cell and
ULOCELLSECTOREQMGRPITEM[/MML]
larger thanfails. 30 PRI km. Therefore, do
command
and
This
A
IMB the
macrois aBlock
cell. high-risk
cell
When can the must
MML
belong number be
command.
to aset
of to not
maximum
sector "HIGH".
Pay of
command.
perform
Sector thethe
equipment operation groups when use the only logical RRUs cell
Otherwise,
attention
three
equipment to
multicarrier the
exceeds execution
following
HSDPA the of
cell
capabilitythis
precautions command
groups, ofRRUs
the and
Command fails. Sector
exists.
of the
List equipment
MPMU type groups
for the use
LampSite only
before
a micro
local running
cell can this
belong command: to athismaximum of
of
Whenthecell,
product. MPMU
the the execution
type
parameter ofLampSite
forconfiguration
the command
The
When
one
fails. local the
multicarrier cell to
parameter be
HSDPA blocked cell must
group. exist.
product.
exceeds
Only onethe set device
ofexecution
sector capabilities,
equipment the is added
Otherwise,
Executing the
[PARA]ULBASEBANDEQMWORKMODE[
A local cell belongs
this command on only of onethis command
interrupts MC-
The
This
command
s a list of high-risk
each MPMUs
is a high-risk
commands,
time in
execution
this a sector
and
command MML changes
running equipment
command.
is any the
executed. of groupcommands will severely affect or even interrupt ongoing
Pay
these
fails.
/PARA]
HSUPA
ongoing is set
group.
services to AIR, for running
less than this
1 minute.
ands according can tobe
attention
operation
A Note
set local connected
to
of sector information.
the
status to
following
of
equipment the different
For details,
precautions
cell.cannot RHUBs see only
be Description of MML Command Reference.
If
Thethe
command
If the RF logicalunit cell
willcell is
configured not
interrupt
is bearing
available ongoing
in DCU any
and logical
services
MC
cannot Inter-
be
over
before
The
shared the
uplink by same
running and
multiple optical
this
downlink port.
command:
sector If
frequency
equipment the MPMUs
cell,
for
Board
used you
less by Jointcan
than 1block
minute
Scheduling
non-Mixed-Multi-RRU the local
and Switch cellcell.
decrease isbe turned the
are
Beforeconnected
spacing
groups modifying
infora the over
localthe
Mixed-Multi-RRU different
Notecell should optical
cell. ports,
the Risk Level
immediately
maximum
off, adding
Otherwise, a no
number
the local matter
local of
cell cell which
allowed
to a
is block
for
multi-carrier
unavailable cells priorityor
the sector
The sector equipment
[PARA]UPEPGROUPID[/PARA],
fixed frequency equipment spacing group
in specified is unavailable.
a Mixed-Multi- ensure
bylocalthe
is
cell
the applied
configured
group
local toon the
interrupts
cell thecell. basebandOtherwise,
ongoing equipment.
services the
Executing
that
RRU the
protocol. cell Thethiscapability
must command
[MO]EPGROUP[/MO]
fixed
have frequency
the issamedegraded.
interrupts MO
spacing
number of Warning
cell
The can
carriedRFwith beallblocked
inunit the
configured cells only after
inreceive
the
in DCU the
multi-carrier
and RNC the
ongoing
referenced
varies
transmit
This services
by
band.
antennas
is a high-risk the for
Forand
MML less
details, than see1 minute
the
antennas. Pay iffixed
responds
cell
RF
This group
unit
logical is a not afor block
high-risk
cells
[PARA]UPEPGROUPID[/PARA]
frequency are
spacingless
configured message.
than
MML
configured.
described 5command.
in minutes.
DCU
command. in cannot
thein thebe
Pay
Executing
attention
This
If you isset to this
a high-risk
the the command
Blockfollowing
MML PRI interrupts
precautions
command.
to "HIGH", Pay
both
attention
The
ULFREQ
ongoing
before
attention
used
RFrunning
[MO]IUB[/MO] to
unit by
and the
services
to the
a MOMixed-Multi-RRU
following
configured
DLFREQ
this forhas
following less
command: in precautions
been DCU
parameters.
than
precautions 5and
added cell.
minutes the if Warning
immediately
Otherwise, the
the local
local cells
cell is shall
unavailable. be
before
RF
Theunit
successfully
Otherwise,
logicalMO running
not
cells
of theUEs
are this
configured
byNodeB running command:
failwhether inthe
to search
configured. DCU
baseband cannot
[CMML]ADD
for the
resource be
before
blocked running
no matter this command: the local cell
The
both
network
The command
RFused
EPGROUP[/CMML] or
unit by a
network can
configured be
Mixed-Multi-RRU successfully
command.
performance
in DCU and cell.
is not
the Warning
to be changing
After
bears blocked
the logical must
the cell. have been
NodeB ID, run configured.
the RST
executed
Otherwise,
Running
optimum.
RF unit
Otherwise, only
this
not the when
local
command
configured
this command theininterrupts
cell load
isDCU
fails simulation
unavailable.
cannot
to be ongoing beof
APP
Running command this to reset
command applications
interrupts used
ongoing
downlink
services
For
both a
executed. 0.5/0.5
used network
carried cell,
by a Before on exists
if the
the
Mixed-Multi-RRU and
NodeB.
coverage the cell. is Warning
type
by the
services NodeB.
carried in thecell the
blocked reset,cell. the
corresponding
In
the the
same
Otherwise, scenariocoverage,
thethe logical
where
local the
cellthe is
UMTS
ratio available.
of theand LTE
Blocking
system
The cell continues
should NodeB betoblocked use is
baseband the unavailable.
NodeB
within resource60ID
The load
networks
transmit
interrupts ratio
share
power
UMTS takes
a main
ofservices
the effect control
local right
cell
carried after
board,
under on the
each Warning
the
before
minutesthe afterchange.
the BLK After the
ULOCELL RST APP
modification.
[MO]EPGROUP[/MO]
sector
associated equipment multimode to the MO total
baseband referenced
cell power
board. by
command
This is a is executed,
executed.
high-risk MML the
command.NodeB ID
Pay
If the
must downlink
[PARA]UPEPGROUPID[/PARA]
be 50%. load
If the simulation
coverage is
type changed
incannot
thethe
is
changes,
After the
attention and
NodeB
to thethe ULCoMP
resets,
following blocked group
precautions local cells Warning
in a cell carrying services, ensure that
[MO]IUB[/MO]
different
match
are
before
This unblocked.
is
coverage,
specified
running
a high-risk
MO must
the
coordinating
this MMLcommand:
be
ratio
command.
different
of transmit
cells. As Pay athe
from
simulated
[MO]EPGROUP[/MO]
power of load is within the normal
MOs referenced range by Warning
result,
Executing
attention thethe ULCoMP
tothisthe
local cell
command
following
under
relationship the does
will change
precautions
sectornot
the
of
LTE
Thisloadis avalue.
interfaces.
equipment to
high-risk If
the the total
MML simulated
cell power
command. load must is
Pay toobe
take
before effect.
cell coverage.running this command:
high,
When the downlink
[MO]EPGROUP[/MO] channel is deteriorated
100%.
attention
If the local tocelltheservedfollowing the MO
by precautions NodeB has
Executing
and therefore
referenced
During a changethis
by this command
the RNC
in cell will
terminates
the groups
maximum change thethe Warning
before
been
cell
running
configured
coverage. in command: for transmit
valid
Whenservices
[PARA]UPEPGROUPID[/PARA]
power
Coverage of aparameter
the based on
multiple-RRU
Expansion Under measurement
cellInterference,
or Mixed-in the
reports,
[MO]IUB[/MO]
Multi-RRU
remove
or call
cell,
[PARA]ULBASEBANDEQMWORKMODE[
This is aall high-risk
such cell
drops
MOthe is
MML occur
the
changed
groups same
command. because
power
before Payas isofless Warning
deteriorated
[MO]EPGROUP[/MO]
than
/PARA]
attention
running theis power
toset
this SNR.
the toof
command. AIR, the running
following MO
sector referenced
this thisby
equipment
precautions
Otherwise,
GSM
(except
before
command interfaces,
65535),
running will interrupt
fails the
the
thisbecommand:
to Ping
power ongoing detection
executed. static
of the sector
services Warning
function
equipment
for less
The
NodeB value does
than will
of 1
function not
be
minute take
changed
name and
[PARA]MAXPWR[/PARA] effect.
mustdecrease to the
be set the the
maximum
cannot
same asexceed transmit
number
the the of
logical power allowed
maximum
NodeB ofname the
for
power cellonto
cells thea Major
for
ensure
configured
cell
RNC. when that the
Otherwise, onpower the the
value ofisthe
baseband notsector
MAE 65535. equipment
equipment.
cannot
of the local
Setting
associate power thecellNodeBs
fordoes each notwith exceedthe logical the Warning
maximum transmit
[PARA]ULOCELLSECTOREQM[/PARA]
NodeBs on the RNC. power. is
Parameters
not recommended. associated with rules are Warning
introduced
In a PSP cell, to accommodate
when one sector theequipment
Automatic
Congestion
serves as the Handler
main transmit (Phase2) feature.
equipment, Warning
The
This mapping
the maximum
is a high-risk between
transmit MMLpower parameters
command. of thePay and
sector
rules
equipment
attention is astofollows:
can
the be set to the
following maximum
precautions Warning
[PARA]ICMODE[/PARA]
transmit
before power
running of
this the PSP
command: and cell, and the
This is a high-risk MML command. Pay
[PARA]TURBOIC[/PARA]
maximum associate with
attention totransmit
Executing this
thecommand
followingpowerprecautions of
will the
make other the one Warning
rules
is set
local 4to
cells and
the in 7 respectively.
default
the beam value cell According
65535.
group to be to
before running this command:
the
This mapping
is a high-risk
command
unavailable.
Removing localbetweencan
cell MML be
from aexecuted
parameter
command.
the beam to Payand
cell a Warning
modify
rule,maximum
attentionrun thethe [MML]DSP
group willtomake
the following
transmit
the local powerprecautions
cell to of be the sector
This is
equipment
This is a
a high-risk
NODEBRULEACTIONPARA[/MML]
before running in
high-risk the this MML
local
MMLcommand: command.
normal
command. cell, Pay
Pay
unavailable. Major
attention
command
This
Running is a this
distributed
attention to
toto the
high-risk
cell,
thequery following
command MML
multi-RRU
following the rule precautions
command.
interruptsactivation
cell
precautions withongoingPay
before
status
before for
attention
services
independent running
a the
to
carried
running cell. this
If the
following
on
demodulation,
this command:
therule
command: isand
precautions
NodeB. activated,
mixed run
When
the
before
multi-RRU the
[MML]LSTrunningparameter
cell. this command: Major
Running this command interrupts ongoing
[PARA]ULBASEBANDEQMWORKMODE[
NODEBRULEACTIONPARA[/MML]
Before
Executing
services running this command
carried this
onMML command,
the interrupts
NodeB. ensure that
This
/PARA]
command is aunder high-risk
to query thefor the command.
setting Pay Warning
IUBCP,
ongoing ULOCELL,
services NODEBPATH,
less than of 1 minute. IUB,
attention
This to
is a high-risk the
[MO]NODEBBASEBANDEQMPARA[/MO]
Administrative
NODEBMULTICELLGRP, following
State. MML precautions
command. Pay
If Administrative
before
attention
MO
StateisisAIR, running
ENABLE,
NODEBREMOTECELLGRP, the this
to running following
thecommand:
this precautions
command
parameter will
settings Warning
If the
before
interrupt logical
running
in the [MML]MOD
NODEBBBUNIT, ongoing cell thisis available
command:
services
ULOCELL[/MML]
NODEBULCOMPGRP, forand lessMC than Inter-
1
Board
The
minute.
command Jointwill
deletion
NODEBBASEBANDEQMPARA Scheduling
succeeds
not take effect. Switch
only when isand turned
Accordingly,local Warning
off,
cells removing
the matching local cell
BEAMCELLGROUP a multi-carrier have IDsbeen cell
exist. group
removed.
interrupts
If the logical
Running ongoing
this cell
[MO]NODEBRULEACTIONPARA[/MO]command is services
available interrupts carried
and MC in Inter-
ongoing all
the
Board cells
parameter
services Jointin the
carried multi-carrier
Scheduling
settings on take the NodeB.Switch
effect. cell isgroup turned for Warning
less
off,
Uplink than
removing 1 minute.
baseband a cell from a multi-carrier
equipment and downlink
cell group will
baseband equipment for interrupt ongoing
all localservices cells
carried
must have in allthe thesame cellsnumber of the group of cabinet for less
than 5 minutes.
where boards are located.
When [PARA]LOCELLTYPE[/PARA] is set
to NORMAL_CELL,
performed
CoMP cell
Resource
switch turned in one
groups
Work on.Mode cell
or cell atcan thegroups
notsame befortime.
An RF
Coverage
modified.
If loopback test interrupts
Expansion Under Interference,
[PARA]HTOHPWSHSW[/PARA] ongoing is set
This
services is a for high-risk
a maximum MML command. of 10 seconds. Pay
remove
If
to the logical
ON, power all such cell
can cell
is groups
available
be shared before
and
betweenInter-
MC
attention
However, tothe theservices
following on precautions
other
This
running
Board
HSDPA is a
Joint high-risk
this
cells only command.
Scheduling MML
when command.
Otherwise,
Switch
they share iscells a of
Pay
this
turned
before
the TRX
attention running
board
tofails
the this
are
following command:
not interrupted.
precautions When
command
off,
power running thisto be have
command executed. interrupts
When
This
the
before uplink
is aamplifier
a logical
high-risk
running RACH
and
cell
this is available,
traffic
MML command: is
this
command.
0 or the
switch
parameter
bitPay error
If
Thisthe
ongoing
turned islocal
a
on. cell
services
high-risk has for
MMLbeen less added
than
command. 1to minute.
Pay Major
[PARA]RULE[/PARA]
rate
attention
Running (BER) to
this of
the the RACH
following
command cannotreaches
precautions
interrupts be modified.
100%,
ongoing
multiple-carrier
ThistheisMC
attention
If Inter-Board
a high-risk
to
[PARA]HTOHPWSHSW[/PARA] cell
the following MML groups,
Jointcommand. remove
Scheduling
precautions the
Pay
is set
After
the
before
services
This test
isthisa can
runningcommand
carried
high-riskbecell started.
this
on MML is executed
command:
the NodeB.
command. to change
Pay to
local
Switch
attention
before
to ON, cellrunning
a from
parameter
to
local the all such
is
following
this command:
whose cell
changed groups
precautions
downlink fromor OFF
the
An parameter
RF [PARA]RULE[/PARA], all Warning
The
attention
remove
ON,
before
Executing
resources it isloopback
sector all
good
running equipment
tothisthepractice
such
are testcommand:
following
cell
this
command
established will
groupstoautomatically
group to
precautions
oncontaining
manually
interrupts the beWBBPa run the
local
stop
removed
before cells
afterrunning of
10
must the
seconds
have
thisbase beenstation
elapse. are
configured.
local
[MML]STR
This
ongoing
board cell
command
reestablished cannot before
services share
accordingforcommand:
running
REALLOCLOCELL[/MML]
can be less
available this
successfully
tothanthe
command.
1new
power minute, with
A
The distributed
Otherwise,
sector
Otherwise, cell
execution
equipment or Mixed-Multi-RRU
of this
group command
and be cell
to sector Warning
command
executed
but
other if only
cells. tothis
only
one enable
setcommand
when of the
sector cell fails
corresponding
equipment is
resource
does
fails.
equipment not allocation
support
to RFmode.
beIf removed loopback must tests.
have been
executed.
configurations.
logical
configured
Parameters cell exists.
in the
associated the
local command
cell,
with executing
rules is not
are this
If
A the
baseband
Executing
configured. valuethis of parameter
loopback
command
Otherwise, test interrupts
interrupts
execution ofPaythis Warning
Removing
manually
The
command downlink
introduced
This is a high-risk the
executed,
will
to local
network
make
accommodateMML cell
the
the leads
NodeB
loadlocal
command. theto Automatic
simulation
cell to be
[PARA]RULE[/PARA]
ongoing
command services
fails. for a is
less set
maximumthan to 1from ofcell.
minute one ifto
interrupted
automatically
uses
unavailable.
Congestion
attention the services
restarts
channelization
to the Handler following borne
all
(Phase2) codes on
local
precautions this
cells
feature. based
112
PERFFIRST(Handover
second.
logical
Executing cellsWhen thisare the uplink
configured,
command Performance
dedicated
but
interrupts if only First
one Warning
If
on
127
The UL the Resource
whose settings
mapping SF =ofWork
128. Mode is
before
Rule),
channel
sector running
cells has
equipment inabetween
this
ahigh command:
multicarrier
BER,
group
parameters
is this grouptest
configured
and
are
can be if
This
ongoing
AUTO_CHAINis
downlink
rules
This
Before
a
[PARA]CSUSERNUM[/PARA]
If is running
command
preferentially
high-risk
services
load
as follows: or
is MML
for
simulation
this
configured used less
MANUAL_CHAIN,
command,
command.
than
needs
toinensure
one
5
and
ensurea Pay
minutes
to bein that
performed.
the
logical
running Mixed-Multi-RRU
attention cells
this
[PARA]PSUSERNUM[/PARA]
enabled, to the
the
[PARA]SIB7RTWPOPTSW[/PARA] are
command following
configured,
corresponding cell, executing
precautions
interrupts but
channel if ongoing
under only this
and one Warning
satisfactory
related detection access success
functions are rate of
enabled CS
component.
After
command
before
set
services
This ofisasector
abaseband
running will
carried
high-risk
[MO]NODEBRESALLOCRULE[/MO]
codes must
[PARA]SIB7MAXRTWP[/PARA] be make byloopback
this
equipment MML
reserved the command.
command:
other local
ison test cell
configured
cells the starts,
served
RNC.toPay be
associate in
tobyitby
and emergency
specifying
If the valueequipmenttheof parametercalls when the NodeB
unavailable.
will
In
the aautomatically
enable
Before
with
control distributed
sector
NodeB
attention rules the
starting
plane for
to0cell
the
andisone 1stop.
cell to
following ortwo
configurations.
the downlinkIMB
group,
respectively,
overloaded cell,
minutes.
precautions
by load the
executing
and all
signaling, Warning
[PARA]KPIFAULTDETECT[/PARA]
[PARA]SW[/PARA]
A baseband loopback is set test tocan ON(ON),be
execution
this
before command
Theexample, running
Mixed-Multi-RRU
simulation, of
[PARA]RTWPSIRTGTADJSW[/PARA]
for this
check will
when this command
make
thatcommand:
the cell
the the fails.
local
and theload
power
excessive cell to
signaling is
parameter
local
performed cells will in
only the
beon [MML]SET
reestablished
the WBBPf properly
and other
Desensitization
be
The
greaterunavailable.
command
distributed
associates
load is than
caused cell
withthe by is
applies
do not
not
carrier
rulessmart supported
2 only
report
transmit
andphones.to
3.the normal by
Cell
power.
Parameters
This picocells
NODEBALGPARA[/MML]
according
new boards. to thethere threshold command.
of deciding the Warning
RRU,
configured
RTWP
You
associated
command canso when
Excessive
query with
with
will four
the
rules
affect alarm. are
receive
carrier
theareRRC pico
Thetransmit
introducedRRUs
antennas
values
connection in
powerof
to of
A
Whensmall
number value
a userof CS of
users
needs R99 to User
and accesstheFault thresholdDetect
aMonitoring:
non-two-
local
(including
by
setup cell,
choosing
accommodate success desensitization
single
[PARA]CELLRTWPEXCESSALMSW[/PA Cell the
rate RF module
Performance
Automatic
of PS settingscenarios
services is and
Congestion invalid or
Threshold,
deciding
antenna the
cell UPA number
or a User
cell Fault
of
for PS Detect
users.
independent The Warning
to
This
Cell those
dual-RF
RA]
Handler
therefore is
and
DL a pico
high-risk
module
Carrier
(Phase3)
must RRUs. TX
be MML
combination
PowerHowever,
feature.
used command.
with on
The the the
scenarios) MPMU
RNC.
mapping
caution. Pay
Threshold,
reestablishment
demodulation or Process interrupts
offollowing
signals Unit
from Fault
all ongoing
multiple Detect
of
and the
attentiondoes LampSite to
not the
[PARA]CELLRTWPEXCESSALMTHD[/PA
After
between starting parameters take
the product
DL effect load
and supports
precautions
for other
simulation,
rules is as types new of
Threshold
services
RRUs, acan for may
basebandless cause
than 1false
loopback minute. alarms.
test cannot Warning
desensitization.
before
RA]
cells.
service
follows: are running
invalid not this
for
be thecommand:
built Mixed-Multi-RRU
in the channel
A
If
be small
the value
performed. value of of Board
parameter Invisible Fault
After
When
cell
UMTS
resource andthisUL thecommand
[PARA]PWRCNGCACSW[/PARA]
Demodulation
distributed
occupied
[PARA]DPCHMAXTXPWRRESTRSW[/PA by is theexecuted,
cell.Mode
simulation. the be
must
Alarm
receiver Occur
[PARA]MULTICELLREBUILDSW[/PARA]
When [PARA]BFMODE[/PARA]
sensitivity Period may
will be cause
reduced. false
in the
Useisorin Warning
is
set
If
RA] set
the
alarms. to
downlink
associates ON, this
[PARA]UX2SONSETUPSW[/PARA]
to 4-Channels load can
with prevent
Demodulation
simulation
rule 8,will downlinkis Mode
started
is
the set to
[MO]ULOCELL[/MO]
command ON(ON), with all cells
MO
discretion is set be to
according
power
set
Self-adaption
a cell congestion
to carrying
OFF,
[PARA]RADIOQUALITYDPCHPCSW[/PA
reestablished
the Demodulation
uX2
services,
immediately
causedlink ensure
that byMode,
after
frequent
is that
the the to
and
MASSIVEBEAM,
network
RRC
simulated
RA] setup.
automatically
the uplink
associates planning Inset
baseband
load this
iswithNORMALBEAM
and
up way,
within willoptimization.
the
equipment
rule be
the9 and downlink
automatically
normal must orrange Warning
DC/MC
FOURTXBEAMOPT,
After Micro capabilityCell degrades.
Dynamic RF loopback
Rx The
Sensitivity tests
performance
deleted,
contain
of load at interrupting
value. least
[PARA]DPCHTPCPOADJSW[/PARA] does
If one
the not WBBPF quickly
services
simulated or deteriorate,
on
loadlater
the is uX2
too
reestablishment
and
Control baseband feature isinterrupts
loopback
activated, testsallthe ongoing
are not
and
link.
boards.
high, RRC
associates the for connections
downlink
with rule channel
10. in progress
is deteriorated
According do
to the not Warning
services
supported.
desensitization
This is a lessvalue
high-risk than
MML 1 minute.
set by
command. this command
Pay
experience
The
When
and
mapping value
therefore of low
between procedure
parameter
the RNC a parameter success
terminates andthe rates,
a rule,
If
When
is replaced
attention by
tonon-peak the
thebased dynamic
following desensitization
precautions
but
valid
run during
[PARA]RTWPIMBALANCEALMTHD[/PAR
[PARA]AUTORECFGSWITCH[/PARA]
the services
[MML]DSP hours,
on the RRC setup
measurement is Warning
SPECTRUMFEAORFUNCTION(Spectrum
[PARA]ULSPECTRUMSHARINGSWITCH
value.
before running this command:
success
A]
set is
reports,to invalid
ON, orrate
NODEBRULEACTIONPARA[/MML] thefor
call may the
drops decrease.
RF unit
occur configured
because of in
-related
[/PARA]
If
The a cell
ongoing isFeatures
inconfigured
the services or Functions)
[MO]ULOCELL[/MO] with
ofrulethe a activation
SECTOREQM
local in cell
theMO is
DCU.
[PARA]COPOLARPORTMAPCFG[/PARA]
deteriorated
command to SNR.
query the Warning
parameter
set
MO to
whose
whose
parameter
If the
you
status baseband
value
adjust
for aisANTCFGMODE
of channel
cell.
[PARA]MULTICELLREBUILDSW[/PARA] Ifresources
automatically
parameter thepower rule is is
are set
reconfigured
of a cell
activated, to after run
FIXED_BANDWIDTH_COMP_MODE,
BEAM,
reallocated the
[PARA]UTRPCEXTCNBAPCAP[/PARA]
based
downlink
the on
[MML]LST the
load desensitization
are interrupted
co-polarization
simulation is setting
for less
detection
started, isthan
the RF 1
is set toto
loopback
invalid
minute ON,
when tests
this all are
cell.
this cells not
command will be reestablished
supported. is executed. Warning
changes,
results.
total predefined thewhen
NODEBRULEACTIONPARA[/MML]
immediately base cellastation
load needswith
varies
spectrum-related to be
When
manually
Automatic
channel
command ULADAPTIVEBPFILTER
reset.
power.configuration
to query To keep
the ofthe
setting totalof orload
co-polarization
feature or function is derated and there
DLADAPTIVEBPFILTERPERFEOPT is
grouping
unchanged,
Administrative information
stop State. may
the downlink
IfThe resultload
Administrative in
are
selectedusable under resources. the
transient
simulation
State is ENABLE,
reestablishment and andabrupt restart thecell
interrupts thecoverage
parameter simulation.
all ongoing settings
[PARA]GU5MHZPERFOPT[/PARA]
changes,
After
in the
the [MML]SET causing
execution callof drops
this to
command, some run
services
parameter forinless the than 1 minute.
[MO]ULOCELL[/MO]
extent.
ULOCELLALGPARA[/MML] commandyou
the [MML]STP Before running
DLSIM[/MML] the command,command to
will
MO,
are
stop
not take RF
advised loopback
the effect.
downlink to run tests
the
network load
Accordingly, are
[MML]LST not supported.
thesimulation
When
of [PARA]DLASYMFILTER[/PARA]
ULOCELLALGPARA[/MML]
a specified
[MO]NODEBRULEACTIONPARA[/MO] local cell or all command local cells.to in
the
query
After [MO]ULOCELL[/MO]
parameter andexecution
the save
settings the take MO
co-polarization
of this is
command, run
effect. set to
TRUE,
grouping
the [MML]MOD
Configuration RFinformation
loopbackofDLSIM[/MML] tests
of each
co-polarization arecell. not
command
grouping
supported.
This
to command
modify
information the may load fails radio
result to be executed
inoftransient
downlinkand when
When
the
network
abrupt phase [PARA]UL0BUFFERZONE[/PARA]
cell load calibration
simulation
coverage capability
changes,of a specified detection
causing
and
has
local been
call drops cell or started
toall somelocal using cells.
extent. theBefore[MML]STR running
[PARA]UL0BUFFERZONEFILTER[/PARA
UPHASECALIBCHK[/MML]
After
the command,the execution you are of this advised command.
command, to runrun the
]When
in the
the the
[MML]DSP
[MML]LST [MO]ULOCELL[/MO]
antenna port co-polarization
DLSIM[/MML]
ULOCELLALGPARA[/MML] MOcommand are set to
to TRUEthe
detection
display
command and ULADAPTIVEFILTER,
istocurrent
successful,
query load
and save phase
ratio of the calibration
downlink
co-
respectively,
capability
network
polarization load RF
detection loopback
simulation
grouping of tests
is information
enabled a specifiedforare the
of not
each
supported.
related
local
cell. cell 4T4R or all cell
local where cells. the UMTS 4T
When
Beam Optimization capability is available
[PARA]DCHSDPASHAREDWITHGSM[/P
and two 2T RF modules are combined.
ARA] in the [MO]ULOCELL[/MO] MO is
set to STATICBANDWIDTH,
DYNAMICBANDWIDTHWITHGSM or
DYNAMICBANDWIDTHWITHOUTGSM,
RF loopback tests are not supported.
When
[PARA]ULSPECTRUMSHARINGPHASE2
[/PARA] in the [MO]ULOCELL[/MO] MO is
set to TRUE, RF loopback tests are not
supported.
When