0% found this document useful (0 votes)

85 views108 pages

Fisa Tehnica - Fibra Optica - E32-CC200

This document provides a compatibility chart for fiber optic cable and amplifier parts from the E32 product line. It lists the various cable types including through-beam, diffuse, general purpose, armored, probe, side sensing, high temperature, and special purpose. For each cable part number, it indicates compatibility with different amplifier models including DIN rail, block style, and other options. This allows users to identify which cable and amplifier combinations will work together for their application.

Uploaded by

Theodora Stefan

We take content rights seriously. If you suspect this is your content, claim it here.

Available Formats

Download as PDF, TXT or read online on Scribd

0% found this document useful (0 votes)

85 views108 pages

Fisa Tehnica - Fibra Optica - E32-CC200

Uploaded by

Theodora Stefan

We take content rights seriously. If you suspect this is your content, claim it here.

Available Formats

Download as PDF, TXT or read online on Scribd

You are on page 1/ 108

R

An Extensive Selection of Fiber-Optic Cables E32

Fiber-Optic Sensing Heads Offer a

Wide Variety of Unique Solutions for
Tough Problems
H Fiber-optic sensors detect small,
fast-moving objects in space-confined
installations and harsh environments
H For a custom fit in the field, most plastic
filament cables can be cut to length
H For detection in hard-to-reach places,
sensing heads with bendable stainless steel
tubing retain complex shapes
H Coiled and ultra-flexible cables are ideal for
flexing and reciprocating machinery such as
robots
H Side-view sensing heads or accessories
save space in right-angle detection
H Convergent beam sensing heads allow
accurate positioning and background
suppression even for shiny objects
H Narrow detection zone of concentric beam
sensing heads helps eliminate background
objects and gives consistent sensing,
regardless of object direction
H Highly flexible fibers with minimum 1-mm
bending radius allows cable to conform to
machine contours
H Most fiber cables offer IP67 protection and
temperature ratings of --40°C to 70°C
(--40°F to 158°F)

2
E32 E32
J FIBER-OPTIC CABLE AND AMPLIFIER COMPATIBILITY
Fiber cables DIN-rail mounting amplifiers Block style amplifiers
Part number E3X-A E3X-DAN E3X-F E3X-H, E3X-NM E3X-NT, E3X- E3MC- E3XA- E3JU-XR E3A2-X
-NH -NV NVG,-VG MY CC4A E3JU-X E3S-X3
Through - beam, General Purpose Type
E32-T11 OK OK OK OK OK OK OK ---- ---- OK (-XR) ----
E32-T11L OK OK OK OK OK OK OK OK ---- ---- ----
E32-T11R OK OK ---- OK OK OK ---- ---- ---- ---- ----
E32-T12L OK OK OK OK OK OK OK ---- ---- ---- ----
E32-T17L OK OK OK OK OK OK OK OK ---- ---- ----
E32-T21 OK OK OK OK OK OK OK ---- ---- OK (-XR) ----
E32-T21L OK OK OK OK OK OK OK ---- ---- ---- ----
E32-T21R OK OK ---- OK OK OK ---- ---- ---- ---- ----
E32-T22 OK OK OK OK OK OK OK ---- ---- OK (-XR) ----
E32-T22L OK OK OK OK OK OK OK ---- ---- ---- ----
E32-TC50 OK ---- OK OK (-H) ---- ---- OK (-VG) ---- ---- ---- ----
E32-TC200 OK OK OK OK OK OK OK OK OK OK (-XR) OK
E32-TC200A OK OK OK OK OK OK OK ---- OK ---- OK
E32-TC200C OK ---- OK OK OK OK OK ---- ---- ---- OK
E32-TC200E OK OK OK OK OK OK OK ---- OK -- OK
E32-TC500 OK ---- OK OK (-H) ---- ---- OK (-VG) ---- ---- ---- ----
E32-TC1000 OK ---- OK OK (-H) ---- ---- OK (-VG) ---- ---- ---- ----
Through -beam, Armored Type
E32-UTAT13F OK ---- ---- ---- ---- ---- ---- ---- ---- OK (-XR) ----
E32-UTAT16F OK ---- ---- ---- ---- ---- ---- ---- ---- OK (-XR) ----
E32-UTBT13F ---- ---- ---- ---- ---- ---- ---- ---- ---- OK (-X) ----
E32-UTBT16F ---- ---- ---- ---- ---- ---- ---- ---- ---- OK (-X) ----
Though -beam, Probe Type
E32-T33-1 OK ---- OK OK (-H) ---- ---- OK (-VG) ---- ---- ---- ----
E32-TC200B OK OK OK OK OK OK OK ---- OK ---- OK
E32-TC200B4 OK OK OK OK OK OK OK ---- OK ---- ----
E32-TC200D OK ---- OK OK ---- ---- OK (-VG) ---- ---- ---- OK
E32-TC200D4 OK ---- OK OK ---- ---- OK (-VG) ---- ---- ---- ----
E32-TC200F OK OK OK OK OK OK OK ---- OK ---- OK
E32-TC200F4 OK OK OK OK OK OK OK ---- OK ---- ----
Through -beam, Side Sensing Type
E32-T14 OK OK OK OK OK OK OK ---- OK ---- ----
E32-T14L OK OK OK OK OK OK OK ---- ---- ---- ----
E32-T16 OK OK OK OK OK OK OK OK OK ---- ----
E32-T16P OK OK ---- OK (-NH) OK OK ---- ---- OK ---- ----
E32-T24 OK OK OK OK OK OK OK ---- ---- ---- ----
Through -beam, High Temperature Type
E32-T51 OK OK OK OK OK OK OK ---- ---- OK (-XR) ----
E32-T61 OK OK OK OK OK OK OK ---- ---- ---- ----
Through -beam, Special Purpose Type
E32-G14 OK OK OK OK OK OK OK ---- OK ---- ----
E32-M21 OK OK OK OK OK OK OK ---- OK ---- ----
E32-T12F OK OK OK OK OK OK OK ---- ---- ---- ----
E32-T22S ---- OK ---- OK OK OK ---- ---- ---- ---- ----
E32-T24S ---- OK ---- OK OK OK ---- ---- ---- ---- ----
E32-T84S ---- OK ---- OK (-NH) OK OK ---- ---- ---- ---- ----

3
E32 E32
Fiber cables DIN-rail mounting amplifiers Block style amplifiers
Part number E3X-A E3X-DAN E3X-F E3X-H, E3X-NM E3X-NT, E3X- E3MC- E3XA- E3JU-XR E3A2-X
-NH -NV NVG,-VG MY CC4A E3JU-X E3S-X3
Diffuse, General Purpose Type
E32-CC200 OK OK OK OK OK OK OK OK OK ---- OK
E32-D11 OK OK OK OK OK OK OK ---- ---- OK (-XR) ----
E32-D11L OK OK OK OK OK OK OK OK ---- ---- ----
E32-D11R OK OK ---- OK (-NH) OK OK OK ---- ---- ---- ----
E32-D21 OK OK OK OK OK OK OK ---- ---- OK (-XR) ----
E32-D21L OK OK OK OK OK OK OK ---- ---- ---- ----
E32-D21R OK OK ---- OK (-NH) OK OK ---- ---- ---- ---- ----
E32-D22L OK OK OK OK OK OK OK ---- ---- ---- ----
E32-D32 OK OK OK OK OK OK OK ---- ---- OK (-XR) ----
E32-D32L OK OK OK OK OK OK OK OK ---- ---- ----
E32-DC50 OK ---- OK OK (-H) ---- ---- OK (-VG) ---- ---- ---- ----
E32-DC200 OK OK OK OK OK OK OK OK OK OK (-XR) OK
E32-DC200C OK ---- OK OK OK OK OK ---- ---- ---- OK
E32-DC200E OK OK OK OK OK OK OK ---- OK ---- OK
E32-DC500 OK ---- OK OK (-H) ---- ---- OK (-VG) ---- ---- ---- ----
E32-DC1000 OK ---- OK OK (-H) ---- ---- OK (-VG) ---- ---- ---- ----
Diffuse, Armored Type
E32-UDAT13F OK ---- ---- ---- ---- ---- ---- ---- ---- OK (-XR) ----
E32-UDAT16F OK ---- ---- ---- ---- ---- ---- ---- ---- OK (-XR) ----
E32-UDBT13F ---- ---- ---- ---- ---- ---- ---- ---- ---- OK (-X) ----
E32-UDBT16F ---- ---- ---- ---- ---- ---- ---- ---- ---- OK (-X) ----
Diffuse, Probe Type
E32-D33 OK OK OK OK OK OK ---- ---- OK ---- ----
E32-DC200B OK OK OK OK OK OK OK ---- OK ---- OK
E32-DC200B4 OK OK OK OK OK OK OK ---- ---- ---- OK
E32-DC200D OK ---- OK OK ---- ---- OK (-VG) ---- ---- ---- OK
E32-DC200D4 OK ---- OK OK ---- ---- OK (-VG) ---- ---- ---- ----
E32-DC200F OK OK OK OK OK OK OK ---- OK ---- OK
E32-DC200F4 OK OK OK OK OK OK OK ---- OK ---- OK
E32-DC9G OK ---- OK OK ---- ---- OK (-VG) ---- OK ---- ----
E32-DC9G4 OK ---- OK OK ---- ---- OK (-VG) ---- ---- ---- ----
Diffuse, Side Sensing Type
E32-D14L OK OK OK OK OK OK OK ---- ---- ---- ----
E32-D24 OK OK OK OK OK OK OK ---- ---- ---- ----
Diffuse, High Temperature Type
E32-D51 OK OK OK OK OK OK OK ---- ---- OK (-XR) ----
E32-D61 OK OK OK OK OK OK OK ---- ---- ---- ----
E32-D73 OK OK OK OK OK OK OK ---- ---- ---- ----
Diffuse, Convergent and Special Purpose Types
E32-D12F OK OK OK OK OK OK OK ---- ---- ---- ----
E32-L24L OK OK OK OK OK OK ---- ---- ---- ---- ----
E32-L25 OK OK OK OK OK OK ---- ---- ---- ---- ----
E32-L25A OK OK OK OK OK OK ---- ---- ---- ---- ----
E32-L25L OK OK OK OK OK OK ---- ---- ---- ---- ----
Retroreflective Type
E32-R16 OK OK OK OK OK OK ---- ---- ---- ---- ----
E32-R21 OK OK OK OK OK OK ---- ---- OK ---- ----

4
E32 E32

Ordering Information
Omron offers fiber-optic cables in through-beam, diffuse and voltage, analog output and color sensing.
retroreflective types. Each cable has a different sensing distance
depending on the amplifier selected. The ordering information indicates models that customers can cut to length for their
provides the sensing distance and compatibility with two general application. Models without this mark are pre-cut by the factory to
classes of amplifiers: DIN rail-mounting DC amplifiers and block maintain their respective specifications.
style amplifiers with different attributes, such as AC/DC supply

J E3X-SERIES, DIN RAIL-MOUNTING AMPLIFIERS

The table specifies the sensing characteristics of each fiber when used with the following amplifiers:
Legend: NM . . . . . E3X-NM (4 channel auto-tuning amplifier)
A . . . . . . . E3X-A (General purpose amplifier) NT . . . . . E3X-NT (Auto-tuning amplifier: general purpose)
DAN-HS E3X-DAN (Digital amplifier-- high speed mode) NH . . . . . E3X-NH (High-precision, auto-tuning amplifier)
DAN-LD E3X-DAN (Digital amplifier-- long distance mode) NHB . . . . E3X-NHB (High-precision, blue LED, auto-tuning amp)
DAN-SM E3X-DAN (Digital amplifier-- standard distance mode) NV . . . . . E3X-NV21 (Water-resistant, red light source amplifier)
F . . . . . . . E3X-F (High performance amplifier-- high speed) NVG . . . . E3X-NVG21 (Water-resistant, green light source amp)
H . . . . . . . E3X-H11 (High gain amplifier) VG . . . . . E3X-VG (Mark sensing amplifier)

J THROUGH-BEAM, GENERAL PURPOSE TYPE

Application Features Appearance Type Detection distance Min. detectable Part number
object (opaque)
Flexible, Ideal for mounting A 180 (1,000*) mm 0.2 mm dia. E32-T11
resists on moving sections M4 threaded head DAN-HS 250 (1,300*) mm -- -- -- -- -- -- -- -- -- -- -- -- --
breaking 4 mm bending radius x 11.7
11 7 mm (0.46
(0 46 in) L
DAN-LD 850 (4,000**) mm -- -- -- -- -- -- -- -- -- -- -- -- --
2 m (6.56
(6 56 ft) length
DAN-SM 680 (3,600*) mm 0.01 mm dia.
F 80 (400*) mm 0.2 mm dia.
H 360 (2,000*) mm 0.3 mm dia.
NH 360 (2,000*) mm 0.04 mm dia.
NHB 50 mm 0.04 mm dia.
NM 240 (1,300*) mm 0.2 mm dia.
NT 260 (1,400*) mm 0.1 mm dia.
NV 260 (1,400*) mm 0.1 mm dia.
NVG 10 (120*) mm 0.2 mm dia.
VG 10 (120*) mm 0.2 mm dia.
Long g Compact
p M4,, head,, A 350 (1,000*) mm 0.5 mm dia. E32-T11L
E32 T11L
di t
distance 1 4 mm ID fiber;
1.4 fib
25 mm bending M4 threaded head x DAN-HS 490 (1,200*) mm -- -- -- -- -- -- -- -- -- -- -- -- -- --
radius 11 mm (0.43 in) L DAN-LD 1,660 (4,000**) mm -- -- -- -- -- -- -- -- -- -- -- -- -- --
2 m (6.56 ft) length DAN-SM 1,330 (3,200*) mm 0.02 mm dia.
F 150 (550*) mm 0.5 mm dia.
H 700 (2,000*) mm 0.5 mm dia.
NH 700 (2,000*) mm 0.06 mm dia.
NHB 90 (250*) mm 0.06 mm dia.
NM 500 (1,200 *) mm 0.2 mm dia.
NT 540 (1,280*) mm 0.15 mm dia.
NV 540 (1,280*) mm 0.15 mm dia.
NVG 40 (120*) mm 0.5 mm dia.
VG 40 (120*) mm 0.5 mm dia.

Note: * Value in parentheses represents the sensing distance of the fiber when the E39-F1 lens is attached to its tip.
** Value in parentheses is based on each fiber having a cable length of 2 m.

5
E32 E32

J THROUGH-BEAM, GENERAL PURPOSE TYPE

Application Features Appearance Type Detection distance Min. detectable ob- Part number
ject (opaque)
Flexible Can be bent like A 140 (1,000*) 0.2 mm dia. E32 T11R
E32-T11R
(resists electric wires; 1 mm
M4 screw x DAN-HS 200 (1,400*) mm -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
breaking) bending radius 14 mm (0.55
(0 55 in)
DAN-LD 670 (4,000**) mm -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
2 m (6.56
(6 56 ft) llength
th
DAN-SM 530 (3,700*) mm 0.01 mm dia.
F Contact Omron Contact Omron
H 280 (2,100*) Contact Omron
NH 280 mm (2,100*) 0.1 mm dia.
NHB Contact Omron Contact Omron
NM 180 (1,300*) mm 0.2 mm dia.
NT 200 (1,400*) mm 0.1 mm dia.
NV 200 (1,400*) mm 0.1 mm dia.
NVG Contact Omron Contact Omron
VG Contact Omron Contact Omron
Long g Compact
p unthreaded A 350 mm 0.5 mm dia. E32-T12L
E32 T12L
di t
distance h d 1 mm ID fiber
head; fib
3 mm dia. (0.12 in) x DAN-HS 490 mm -- -- -- -- -- -- -- -- -- -- -- -- -- --
14 mm (0.55
(0 55 in)
i )
DAN-LD 1,660 mm -- -- -- -- -- -- -- -- -- -- -- -- -- --
2 m (6.56
( ft)
f ) length
l h
DAN-SM 1,330 mm 0.01 mm dia.
F 150 mm 0.5 mm dia.
H 700 mm 0.5 mm dia.
NH 700 mm 0.06 mm dia.
NHB 90 mm 0.06 mm dia.
NM 500 mm 0.2 mm dia.
NT 540 mm 0.15 mm dia.
NV 540 mm 0.15 mm dia.
NVG 40 mm 0.5 mm dia.
VG 40 mm 0.5 mm dia.

Note: * Value in parentheses represents the sensing distance of the fiber when the E39-F1 lens is attached to its tip.
** Value in parentheses is based on each fiber having a cable length of 2 m.

6
E32 E32

J THROUGH-BEAM, GENERAL PURPOSE TYPE

Application Features Appearance Type Detection distance Min. detectable ob- Part number
ject (opaque)
Long Magnifying lens A 7,000 mm 0.8 mm dia. E32-T17L
distance extends sensing
M14 threaded head DAN-HS 9,800 mm -- -- -- -- -- -- -- -- -- -- -- -- -- --
distance; ideal for x 23 mm (0.91
(0 91 in)
i )L
explosion-proof
p p DAN-LD 20,000 mm * -- -- -- -- -- -- -- -- -- -- -- -- --
applications;
li i 25
2 mm 10 m (32.8
( ft)
f ) length
l h
bending radius; M14 DAN-SM 20,000 mm * 0.01 mm dia.
head,, 1 mm ID fiber F 3,000 mm 1.5 mm dia.
H 14,000 mm 2.1 mm dia.
NH 14,000 mm 0.2 mm dia.
NHB 2,000 mm 0.2 mm dia.
NM 7,000 mm 0.7 mm dia.
NT 7,500 mm 0.5 mm dia.
NV 7,500 mm 0.5 mm dia.
NVG 800 mm 2.1 mm dia.
VG 800 mm 2.1 mm dia.
Flexible Ideal for mountingg A 50 mm 0.2 mm dia. E32-T21
E32 T21
( i t
(resists on moving
i sections;
ti M3 threaded head x
breaking) 4 mm bending 11 mm (0.43 in) L DAN-HS 80 mm -- -- -- -- -- -- -- -- -- -- -- -- --
radius; 0.5 mm ID DAN-LD 220 mm -- -- -- -- -- -- -- -- -- -- -- -- --
2 m (6.56 ft) length
fib
fiber
DAN-SM 200 mm 0.01 mm dia.
F 26 mm 0.2 mm dia.
H 100 mm 0.2 mm dia.
NH 100 mm 0.04 mm dia.
NHB Contact Omron Contact Omron
NM 65 mm 0.2 mm dia.
NT 70 mm 0.1 mm dia.
NV 70 mm 0.1 mm dia.
NVG 6 mm 0.1 mm dia.
VG 6 mm 0.2 mm dia.

Note: * Value is based on each fiber having a cable length of 10 m.

7
E32 E32

J THROUGH-BEAM, GENERAL PURPOSE TYPE

Application Features Appearance Type Detection distance Min. detectable Part number
object (opaque)
Long Compact mounting A 100 mm 0.2 mm dia. E32 T21L
E32-T21L
distance head; 25 mm M3 threaded head x DAN-HS 180 mm -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
bending radius; 9 mm (0.35
(0 35 in) L
0.5 mm ID fiber DAN-LD 500 mm -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
2 m (6.56
(6 56 ft) length
DAN-SM 440 mm 0.01 mm dia.
F 50 mm 0.2 mm dia.
H 200 mm 0.2 mm dia.
NH 200 mm 0.04 mm dia.
NHB Contact Omron Contact Omron
NM 150 mm 0.2 mm dia.
NT 160 mm 0.1 mm dia.
NV 160 mm 0.1 mm dia.
NVG 10 mm 0.2 mm dia.
VG 10 mm 0.2 mm dia.
Flexible Can be bent like A 30 mm 0.2 mm dia. E32-T21R
( i t
(resists electric
l t i wires;
i 1 mm M3 threaded head x DAN-HS
breaking) bending radius 50 mm -- -- -- -- -- -- -- -- -- -- -- -- -- --
9 5 mm (0.37
9.5 (0 37 in) L
DAN-LD 150 mm -- -- -- -- -- -- -- -- -- -- -- -- -- --
2 m (6.56
(6 56 ft) length
DAN-SM 130 mm 0.01 mm dia.
F Contact Omron Contact Omron
H 60 mm 0.2 mm dia.
NH 60 mm 0.1 mm dia.
NHB Contact Omron Contact Omron
NM 40 mm 0.2 mm dia.
NT 41 mm 0.1 mm dia.
NV 41 mm 0.1 mm dia.
NVG Contact Omron Contact Omron
VG Contact Omron Contact Omron

8
E32 E32

J THROUGH-BEAM, GENERAL PURPOSE TYPE

Application Features Appearance Type Detection distance Min. detectable Part number
object (opaque)
Minute 2 mm dia. head fits A 50 mm 0.1 mm dia. E32 T22
E32-T22
objects in space-confined
2 mm dia. (0.8 in) x DAN-HS 90 mm -- -- -- -- -- -- -- -- -- -- -- -- -- --
areas; 25 mm 22 mm (0.87
(0 87 in)
i )
bendingg radius;; DAN-LD 250 mm -- -- -- -- -- -- -- -- -- -- -- -- -- --
0 mm ID fiber
0.5 fib 2 m (6.56
(6 56 ft) length
l th
DAN-SM 220 mm 0.01 mm dia.
F 26 mm 0.1 mm dia.
H 100 mm 0.1 mm dia.
NH 100 mm 0.04 mm dia.
NHB Contact Omron Contact Omron
NM 70 mm 0.2 mm dia.
NT 75 mm 0.1 mm dia.
NV 75 mm 0.1 mm dia.
NVG 7 mm 0.1 mm dia.
VG 7 mm 0.1 mm dia.
Long g 2 mm dia. head fits A 100 mm 0.2 mm dia. E32-T22L
E32 T22L
di t
distance i space-confined
in fi d
areas; 25 mm 2 mm dia. (0.8 in) x DAN-HS 180 mm -- -- -- -- -- -- -- -- -- -- -- -- --
22 mm (0.87
(0 87 in)
i )
bendingg radius; DAN-LD 500 mm -- -- -- -- -- -- -- -- -- -- -- -- --
0 5 mm ID fiber
0.5 fib 2 m (6.56
( ft)
f ) length
l h
DAN-SM 440 mm 0.01 mm dia.
F 50 mm 0.2 mm dia.
H 200 mm 0.2 mm dia.
NH 200 mm 0.04 mm dia.
NHB Contact Omron Contact Omron
NM 150 mm 0.2 mm dia.
NT 160 mm 0.1 mm dia.
NV 160 mm 0.1 mm dia.
NVG 10 mm 0.2 mm dia.
VG 10 mm 0.2 mm dia.

9
E32 E32

J THROUGH-BEAM, GENERAL PURPOSE TYPE

Application Features Appearance Type Detection distance Min. detectable Part number
object (opaque)
General Compact threaded A 200 (1,500*) mm 0.2 mm dia. E32-TC50
purpose head; short cable
M4 threaded head x DAN-HS Contact Omron Contact Omron
length; 25 mm
14 mm (0.55 in) L
bendingg radius;; DAN-LD Contact Omron Contact Omron
1 mm ID fiber
fib 50 cm (1.64 ft) length
DAN-SM Contact Omron Contact Omron
F 80 mm 0.2 mm dia.
H 400 (3,000*) mm 0.2 mm dia.
NH Contact Omron Contact Omron
NHB Contact Omron Contact Omron
NM Contact Omron Contact Omron
NT Contact Omron Contact Omron
NV Contact Omron Contact Omron
NVG Contact Omron Contact Omron
VG 28 mm (190*) mm 0.2 mm dia.
General Compact
p threaded A 200 (1,500*) mm 0.2 mm dia. E32-TC200
purpose h d 25 mm
head;
bending radius; M4 threaded head x DAN-HS 280 (2,100*) mm -- -- -- -- -- -- -- -- -- -- -- -- --
1 mm ID fiber 14 mm (0.55 in) L
DAN-LD 950 (4,000**) mm -- -- -- -- -- -- -- -- -- -- -- -- --
2 m (6.56 ft) length
DAN-SM 760 (4,000**) mm 0.01 mm dia.
F 80 (670*) mm 0.2 mm dia.
H 400 (3,000*) mm 0.2 mm dia.
NH 400 (3,000*) mm 0.04 mm dia.
NHB 55 (420*) mm 0.04 mm dia.
NM 270 (2,000*) mm 0.2 mm dia.
NT 290 (2,100*) mm 0.1 mm dia.
NV 290 (2,100*) mm 0.1 mm dia.
NVG 28 mm (190*) mm 0.2 mm dia.
VG 28 mm (190*) mm 0.2 mm dia.

Note: * Value in parentheses represents the sensing distance of the fiber when the E39-F1 lens is attached to its tip.
** Value in parentheses is based on each fiber having a cable length of 2 m.

10
E32 E32

J THROUGH-BEAM, GENERAL PURPOSE TYPE

Application Features Appearance Type Detection distance Min. detectable Part number
object (opaque)
General M3; possible to A 180 mm 0.2 mm dia. E32-TC200A
purpose mount the reflective
DAN-HS 250 mm -- -- -- -- -- -- -- -- -- -- -- -- --
side-view conversion M3 threaded head x
7 mm (0.28
( in)
i )L
attachment DAN-LD 850 mm -- -- -- -- -- -- -- -- -- -- -- -- --
(E39 F ) 25
(E39-F5); 2 mm 2 m (6.56 ft) length
bending radius; DAN-SM 680 mm 0.01 mm dia.
1 mm ID fiber F 80 mm 0.2 mm dia.
H 360 mm 0.3 mm dia.
NH 360 mm 0.04 mm dia.
NHB 55 mm 0.04 mm dia.
NM 250 mm 0.2 mm dia.
NT 270 mm 0.1 mm dia.
NV 270 mm 0.1 mm dia.
NVG 28 mm 0.2 mm dia.
VG 28 mm 0.2 mm dia.
General Spiral
p coiled cable A 150 (800*) mm 0.2 mm dia. E32-TC200C
E32 TC200C
purpose withstands
ith t d repeatedt d
stretching from DAN-HS Contact Omron Contact Omron
M4 threaded
M h d d head
h dx
reciprocating
p g 11 mm (0.43 in) L DAN-LD Contact Omron Contact Omron
machine
hi parts;t
25 mm bending Coiled 56.5 cm (1.8 DAN-SM Contact Omron Contact Omron
radius; 1 mm ID fiber ft) L; 2 m (6.56 ft) ex-
tended F 60 (350*) mm 0.2 mm dia.
H 300 (1,600*) mm 0.2 mm dia.
NH 300 (3,600*) mm 0.04 mm dia.
NHB Contact Omron Contact Omron
NM 200 (800*) mm 0.2 mm dia
NT 210 (850*) mm 0.1 mm dia
NV 210 (850*) mm 0.1 mm dia
NVG 18 (100*) mm 0.2 mm dia
VG 18 (100*) mm 0.2 mm dia

Note: *Value in parentheses represents the sensing distance of the fiber when the E39-F1 lens is attached to its tip.

11
E32 E32

J THROUGH-BEAM, GENERAL PURPOSE TYPE

Application Features Appearance Type Detection distance Min. detectable Part number
object (opaque)
General M3; suitable for A 50 mm 0.1mm dia. E32 TC200E
E32-TC200E
purpose detecting minute M3 threaded head x DAN-HS 90 mm -- -- -- -- -- -- -- -- -- -- -- -- -- --
objects; 25 mm 11 mm (0.43
(0 43 in) L
bendingg radius;; DAN-LD 250 mm -- -- -- -- -- -- -- -- -- -- -- -- -- --
0 5 mm ID fiber
0.5 fib 2 m (6.56
(6 56 ft) length
DAN-SM 220 mm 0.01 mm dia.
F 26 mm 0.1 mm dia.
H 100 mm 0.1 mm dia.
NH 100 mm 0.04 mm dia.
NHB Contact Omron Contact Omron
NM 70 mm 0.2 mm dia.
NT 75 mm 0.1 mm dia.
NV 75 mm 0.1 mm dia.
NVG 8 mm 0.1 mm dia.
VG 8 mm 0.1 mm dia.
General Extended length
g and A 200 (1,500*) mm 0.2 mm dia. E32-TC500
purpose sensing
i distance;
di t
25 mm bending M4 threaded head x DAN-HS Contact Omron Contact Omron
radius; 1 mm ID fiber 14 mm (0.55 in) L
DAN-LD Contact Omron Contact Omron
5 m (16.4 ft) length
DAN-SM Contact Omron Contact Omron
F 80 mm 0.2 mm dia.
H 400 (3,000*) mm 0.2 mm dia.
NH Contact Omron Contact Omron
NHB Contact Omron Contact Omron
NM Contact Omron Contact Omron
NT Contact Omron Contact Omron
NV Contact Omron Contact Omron
NVG Contact Omron Contact Omron
VG 28 mm 0.2 mm dia.
General Extended length
g and A 500 (1000*) mm 0.01 mm dia. E32-TC1000
purpose sensing
i distance;
di t
25 mm bending M4 threaded head x DAN-HS Contact Omron Contact Omron
radius; 1 mm ID fiber 14 mm (0.55
( in)
i )L
DAN-LD Contact Omron Contact Omron
10 m (32.8 ft) length
DAN-SM Contact Omron Contact Omron
F 500(1,000*) mm 0.01 mm dia.
H 500 (1,000*) mm 0.01 mm dia.
NH Contact Omron Contact Omron
NHB Contact Omron Contact Omron
NM Contact Omron Contact Omron
NT Contact Omron Contact Omron
NV Contact Omron Contact Omron
NVG Contact Omron Contact Omron
VG 500 (1,000*) mm 0.01 mm dia.

Note: *Value in parentheses represents the sensing distance of the fiber when the E39-F1 lens is attached to its tip.

12
E32 E32

J THROUGH-BEAM, ARMORED TYPE

Application Features Appearance Type Detection distance Min. detectable Part number
object (opaque)
General Can withstand tem-
tem - A 200 mm 0.2 mm dia. E32 UTAT1 3F
E32-UTAT1-3F
purpose peratures to 150°C
DAN-HS Contact Omron Contact Omron
(302°F)
5/16 -- 24 thread x DAN-LD Contact Omron Contact Omron
3 8 mm (1.5
3.8 (1 5 in)
i )L
DAN-SM Contact Omron Contact Omron
0.91 m (3
( ft)
f ) length
l h
F Contact Omron Contact Omron
H Contact Omron Contact Omron
NH Contact Omron Contact Omron
NHB Contact Omron Contact Omron
NM Contact Omron Contact Omron
NT Contact Omron Contact Omron
NV Contact Omron Contact Omron
NVG Contact Omron Contact Omron
VG Contact Omron Contact Omron
General Can withstand tem-- A 170 mm 0.2 mm dia. E32-UTAT1-6F
purpose peratures
t to
t 150°C
(302°F) DAN-HS Contact Omron Contact Omron

5/16 -- 24 thread x DAN-LD Contact Omron Contact Omron

3.8 mm (1.5 in) L
DAN-SM Contact Omron Contact Omron
1.83 m (6 ft) length F Contact Omron Contact Omron
H Contact Omron Contact Omron
NH Contact Omron Contact Omron
NHB Contact Omron Contact Omron
NM Contact Omron Contact Omron
NT Contact Omron Contact Omron
NV Contact Omron Contact Omron
NVG Contact Omron Contact Omron
VG Contact Omron Contact Omron
General Can withstand tem- E3JU-X 400 mm 0.25 mm dia. E32-UTBT1-3F
purpose peratures to 200°C amp only
5/16-- 24 thread x
(392°F) 38.1 mm (1.5 in) L

0.91 m (3 ft) length

General Can withstand tem- E3JU-X 400 mm 0.25 mm dia. E32-UTBT1-6F
purpose peratures to 200°C amp only
5/16-- 24 thread x
(392°F) 38.1 mm (1.5 in) L

1.83 m (6 ft) length

13
E32 E32

J THROUGH-BEAM, PROBE TYPE

Application Features Appearance Type Detection distance Min. detectable Part number
object (opaque)
Needle 303 stainless steel 0.8 mm dia. A 15 mm 0.06 mm dia. E32-T33-1
probe probe for ultra small x 15 mm L
DAN-HS Contact Omron Contact Omron
objects; 12 mm heat
shrink tubingg can DAN-LD Contact Omron Contact Omron
provide
id extra sealing
li
3 mm dia. x DAN-SM Contact Omron Contact Omron
and strain relief; 20 mm L
25 mm bending g F 15 mm 0.06 mm dia.
radius;
di 0.25
0 25 mm ID 2 m (6.56
(6 56 ft) cable
fiber H 15 mm 0.06 mm dia.
NH Contact Omron Contact Omron
NHB Contact Omron Contact Omron
NM Contact Omron Contact Omron
NT Contact Omron Contact Omron
NV Contact Omron Contact Omron
NVG Contact Omron Contact Omron
VG 15 mm 0.06 mm dia.
Thin fiber Probe for space-
p A 180 mm 0.2 mm dia. E32-TC200B
E32 TC200B
confined
fi d sensingi M4 threaded head
areas; 25 mm DAN-HS 280 mm -- -- -- -- -- -- -- -- -- -- -- --
90 mm (3.54
(3 54 in)
bendingg radius; probe length DAN-LD 950 mm -- -- -- -- -- -- -- -- -- -- -- --
1 mm ID fiber.
fib
(
2 m (6.56 ft)) length
g DAN-SM 760 mm 0.01 mm dia.
F 80 mm 0.2 mm dia.
H 400 mm 0.2 mm dia.
NH 400 mm 0.04 mm dia.
NHB 55mm 0.04 mm dia.
NM 270 mm 0.2 mm dia.
NT 290 mm 0.1 mm dia.
NV 290 mm 0.1 mm dia.
NVG 28 mm 0.2 mm dia.
VG 28 mm 0.2 mm dia.

14
E32 E32

J THROUGH-BEAM, PROBE TYPE (CONT.)

Application Features Appearance Type Detection distance Min. detectable Part number
object (opaque)
Thin fiber Probe for space-
space A 180 mm 0.2 mm dia. E32-TC200B4
confined sensing
M4 threaded head DAN-HS 280 mm -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
areas; 25 mm 40 mm (1.57
(1 57 in)
bendingg radius;; probe length DAN-LD 950 mm -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
1 mm ID fiber
fib
2 m (6.56 ft) length DAN-SM 760 mm 0.01 mm dia.
F 80 mm 0.2 mm dia.
H 400 mm 0.2 mm dia.
NH 400 mm 0.04 mm dia.
NHB 55 mm 0.04 mm dia.
NM 270 mm 0.2 mm dia.
NT 290 mm 0.1 mm dia.
NV 290 mm 0.1 mm dia.
NVG 28 mm 0.2 mm dia.
VG 28 mm 0.2 mm dia.
Thin probe
p Sensing g head with A 150 mm 0.2 mm dia. E32-TC200D
E32 TC200D
90 mm probe;b spiral
i l
coiled cable with- DAN-HS Contact Omron Contact Omron
M4 threaded head
stands repeated
p 90 mm (3.54 in) DAN-LD Contact Omron Contact Omron
stretching
t t hi from
f probe length
reciprocating DAN-SM Contact Omron Contact Omron
Coiled 56.6
56 6 cm
machine parts;
p ((1.85 ft);
); F 60 mm 0.2 mm dia.
25 mm bending 2 m (6.56
(6 56 ft) when
radius; 1 mm ID fiber extended H 300 mm 0.2 mm dia.
NH 300 mm 0.04 mm dia.
NHB Contact Omron Contact Omron
NM Contact Omron Contact Omron
NT Contact Omron Contact Omron
NV Contact Omron Contact Omron
NVG Contact Omron Contact Omron
VG 18 mm 0.2 mm dia.
Thin probe
p Sensing g head with A 150 mm 0.2 mm dia. E32-TC200D4
E32 TC200D4
40 mm probe;
b spiral
i l
coiled cable DAN-HS Contact Omron Contact Omron
M4 threaded head
withstands repeated
p 40 mm (1.57
( in)) DAN-LD Contact Omron Contact Omron
stretching
t t hi from
f probe length
reciprocating DAN-SM Contact Omron Contact Omron
Coiled 56.6
56 6 cm
machine parts; (1.85 ft); F 60 mm 0.2 mm dia.
25 mm bending 2 m (6.56
(6 56 ft) when
h
radius; 1 mm ID fiber extended H 300 mm 0.2 mm dia.
NH 300 mm 0.04 mm dia.
NHB Contact Omron Contact Omron
NM Contact Omron Contact Omron
NT Contact Omron Contact Omron
NV Contact Omron Contact Omron
NVG Contact Omron Contact Omron
VG 18 mm 0.2 mm dia.

15
E32 E32

J THROUGH BEAM, PROBE TYPE (CONT.)

Application Features Appearance Type Detection distance Min. detectable Part number
object (opaque)
Thin probe Sensing head with A 50 mm 0.1 mm dia. E32 TC200F
E32-TC200F
90 mm probe; 25 M3 threaded head DAN-HS 90 mm -- -- -- -- -- -- -- -- -- -- -- -- --
mm bending radius; 90 mm (3.54
(3 54 in)
0.5 mm ID fiber length
g probe
p DAN-LD 250 mm -- -- -- -- -- -- -- -- -- -- -- -- --
2 m (6.56 ft) length DAN-SM 220 mm 0.01 mm dia.
F 26 mm 0.1 mm dia.
H 100 mm 0.1 mm dia.
NH 100 mm 0.04 mm dia.
NHB Contact Omron Contact Omron
NM 70 mm 0.2 mm dia.
NT 75 mm 0.1 mm dia.
NV 75 mm 0.1 mm dia.
NVG 8 mm 0.1 mm dia.
VG 8 mm 0.1 mm dia.
Thin probe
p Sensingg head with A 50 mm 0.1 mm dia. E32-TC200F4
E32 TC200F4
40 mm probe;
b
M3 threaded head DAN-HS 90 mm -- -- -- -- -- -- -- -- -- -- --
25 mm bending 40 mm (1.57
(1 57 in)
radius; 0.5 mm ID length
g probe
p DAN-LD 250 mm -- -- -- -- -- -- -- -- -- -- --
fib
fiber
(
2m (6.56 ft)) length
g DAN-SM 220 mm 0.01 mm dia.
F 26 mm 0.1 mm dia.
H 100 mm 0.1 mm dia.
NH 100 mm 0.04 mm dia.
NHB Contact Omron Contact Omron
NM 70 mm 0.2 mm dia.
NT 75 mm 0.1 mm dia.
NV 75 mm 0.1 mm dia.
NVG 8 mm 0.1 mm dia.
VG 8 mm 0.1 mm dia.

16
E32 E32

J THROUGH-BEAM, SIDE BEAM TYPE

Application Features Appearance Type Detection distance Min. detectable Part number
object (opaque)
Long Built in lens provides
Built-in A 900 mm 0.2 mm dia. E32-T14
distance long sensing
DAN-HS 1,250 mm -- -- -- -- -- -- -- -- -- -- -- -- -- --
distance; each
sensing g head has DAN-LD 4,000 mm -- -- -- -- -- -- -- -- -- -- -- -- -- --
two 3.2
3 2 mm screw 2 m (6.56 ft) length
mounting holes; DAN-SM 3,400 mm 0.01 mm dia.
25 mm bending g F 380 mm 0.2 mm dia.
radius;
di 1 mm ID fiber
fib
H 1,800 mm 0.2 mm dia.
NH 1,800 mm 0.08 mm dia.
NHB 200mm 0.08 mm dia.
NM 1,000 mm 0.2 mm dia.
NT 1,070 mm 0.2 mm dia.
NV 1,070 mm 0.2 mm dia.
NVG 80 mm 0.2 mm dia.
VG 80 mm 0.2 mm dia.
Long g Space-saving
p g 3 mm A 120 mm 0.1 mm dia. E32-T14L
di t
distance mounting;
ti 25 mm (
(0.12 in)
i )
bending radius; dia. x 35 DAN-HS 170 mm -- -- -- -- -- -- -- -- -- -- -- -- --
1 mm ID fiber mm (1.38
in) L DAN-LD 570 mm -- -- -- -- -- -- -- -- -- -- -- -- --
DAN-SM 460 mm 0.01 mm dia.
2 m (6.56 ft) length
F 30 mm 0.2 mm dia.
H 240 mm 0.2 mm dia.
NH 240 mm 0.08 mm dia.
NHB 30 mm 0.08 mm dia.
NM 130 mm 0.3 mm dia.
NT 140 mm 0.2 mm dia.
NV 140 mm 0.2 mm dia.
NVG 10 mm 0.1 mm dia.
VG 10 mm 0.1 mm dia.

17
E32 E32

J THROUGH-BEAM, SIDE BEAM TYPE (CONT.)

Application Features Appearance Type Detection distance Min. detectable Part number
object (opaque)
Area 10 mm wide beam, A 750 mm 6.0 mm dia.* E32-T16
sensing long sensing
DAN-HS 1,000 mm -- -- -- -- -- -- -- -- -- -- --
distance; 25 mm 10 mm
bendingg radius;; DAN-LD 3,500 mm -- -- -- -- -- -- -- -- -- -- --
1 mm ID fiber;
fib 2 m (6.56 ft) length
includes 0.5 mm and DAN-SM 2,800 mm 0.6 mm dia.
1 mm slit masks F 330 mm 7.0 mm dia.*
H 1,500 mm 6.0 mm dia.*
NH 1,500 mm 2.0 mm dia.*
NHB 700 mm 2.0 mm dia.*
NM 1,000 mm 5.0 mm dia.*
NT 1,070 mm 5.0 mm dia.*
NV 1,070 mm 5.0 mm dia.*
NVG 150 mm 7.0 mm dia.*
VG 150 mm 7.0 mm dia.*
Area 11 mm wide beam;; A 300 mm 2.0 mm dia.* E32-T16P
sensing
i fl ibl cable
flexible bl allows
ll
10 mm bending 11 mm
DAN-HS 420 mm -- -- -- -- -- -- -- -- -- -- -- -- --
radius; 1 mm ID DAN-LD 1,400 mm -- -- -- -- -- -- -- -- -- -- -- -- --
fib includes
fiber; i l d 2 m (6.56
(6 56 ft) length
l th
0.5 mm and 1 mm DAN-SM 1,100 mm 0.2 mm dia.
slit masks F Contact Omron Contact Omron
H Contact Omron Contact Omron
NH 600 mm 0.4 mm dia.*
NHB Contact Omron Contact Omron
NM 400 mm 1.0 mm dia.*
NT 480 mm 1.3 mm dia.*
NV 480 mm 1.3 mm dia.*
NVG Contact Omron Contact Omron
VG Contact Omron Contact Omron

Note: *This value was measured at a sensing distance of 100 mm.

18
E32 E32

J THROUGH-BEAM, SIDE BEAM TYPE (CONT.)

Application Features Appearance Type Detection distance Min. detectable Part number
object (opaque)
Small Suitable for detecting 1 mm dia. x A 45 mm 0.1 mm dia. E32-T24
objects; minute objects; 304 15 mm L
DAN-HS 55 mm -- -- -- -- -- -- -- -- -- -- -- -- --
side view stainless steel 2 mm dia.
di x
sensingg needle tip;
p; 25 mm 15 mm L DAN-LD 150 mm -- -- -- -- -- -- -- -- -- -- -- -- --
b di radius;
bending di
0.5 mm ID fiber DAN-SM 130 mm 0.01 mm dia.
2 m (6.56
(6 56 ft) length
F 15 mm 0.3 mm dia.
H 90 mm 0.1 mm dia.
NH 90 mm 0.04 mm dia.
NHB Contact Omron Contact Omron
NM 45 mm 0.2 mm dia.
NT 48 mm 0.1 mm dia.
NV 48 mm 0.1 mm dia.
NVG 2 mm 0.2 mm dia.
VG 2 mm 0.2 mm dia.

19
E32 E32

J THROUGH-BEAM, HIGH TEMPERATURE TYPE

Application Features Appearance Type Detection distance Min. detectable Part number
object (opaque)
Heat Resists 150°C;
150 C; fiber A 200 mm 1.0 mm dia. E32-T51
resistant sheath material: M4 threaded head x DAN-HS 280 mm -- -- -- -- -- -- -- -- -- -- -- -- -- --
fluororesin
fluororesin. 17 mm (0.67
(0 67 in) L
Operating
p g ambient DAN-LD 950 mm -- -- -- -- -- -- -- -- -- -- -- -- -- --
2 m (6.56
(6 56 ft) length
temperature: -- 40_C
0 C
DAN-SM 760 mm 0.01 mm dia.
to 150_C (-- 40_F to
302_F);); 1.5 mm ID F 80 mm 1.0 mm dia.
fib
fiber
H 400 mm 1.0 mm dia.
NH 400 mm 0.4 mm dia.
NHB 35 mm 0.4 mm dia.
NM 300 mm 0.4 mm dia.
NT 320 mm 0.3 mm dia.
NV 320 mm 0.3 mm dia.
NVG 20 mm 1.0 mm dia.
VG 20 mm 1.0 mm dia.
Heat Resists 300°C,, with A 150 (1,500*) mm 0.2 mm dia. E32-T61
resistant
i t t spiral
i l tube;
t b high
hi h M4 threaded head x
mechanical strength; DAN-HS 170 (1,300*) mm -- -- -- -- -- -- -- -- -- -- -- -- --
20 mm (0.79
(0 79 in) L
fiber sheath material: DAN-LD 570 (4,000**) mm -- -- -- -- -- -- -- -- -- -- -- -- --
stainless
t i l steel.
t l 2 m (6.56
(6 56 ft) length
Operating ambient DAN-SM 450 (3,400*) mm 0.01 mm dia.
temperature: F 60 (450*) mm 0.5 mm dia.
-- 40_C to 300_C
(-- 40
40_FF to 572
572_F);
F); H 300 (3,000*) mm 0.3 mm dia.
1 mm ID fiber NH 300 (3,000*) mm 0.12 mm dia.
NHB Contact Omron Contact Omron
NM 180 (2,000*) mm 0.2 mm dia.
NT 190 (2,100*) mm 0.15 mm dia.
NV 190 (2,100*) mm 0.15 mm dia.
NVG 18 (130*) mm 0.5 mm dia.
VG 18 (130*) mm 0.5 mm dia.

Note: * Value in parentheses represents the sensing distance of the fiber when the E39-F1 lens is attached to its tip.
**Value in parentheses is based on each fiber having a cable length of 2,000 mm.

20
E32 E32

J THROUGH-BEAM, SPECIAL PURPOSE TYPE

Application Features Appearance Type Detection distance Min. detectable Part number
object (opaque)
Mark/edge Ideal for mark A 10 mm 0.5 mm dia. E32-G14
detection sensing or belt
DAN-HS 10 mm -- -- -- -- -- -- -- -- -- -- -- --
alignment; no optical
axis adjustment
j DAN-LD 10 mm -- -- -- -- -- -- -- -- -- -- -- --
required;
i d easy to 10 mm
mount; 1 mm ID fiber DAN-SM 10 mm 0.16 mm dia.
2 m (6.56
(6 56 ft) llength
th
F 10 mm 0.5 mm dia.
H 10 mm Contact Omron
NH 10 mm Contact Omron
NHB Contact Omron Contact Omron
NM 10 mm 0.7 mm dia.
NT 10 mm 0.4 mm dia.
NV 10 mm 0.4 mm dia.
NVG 10 mm 0.6 mm dia.
VG 10 mm 0.6 mm dia.
Area Use with A 150 mm 0.3 mm dia. E32-M21
sensing
i E3XA CC4A for
E3XA-CC4A f
shape recognition; DAN-HS 250 mm -- -- -- -- -- -- -- -- -- -- -- -- --
0.5 mm ID fiber M3 threaded head DAN-LD 700 mm -- -- -- -- -- -- -- -- -- -- -- -- --
x11 mm (0.43
(0 43 in) L
DAN-SM 610 mm 0.01 mm dia.
2 m (6.56
(6 56 ft) llength
th
F 65 mm 0.3 mm dia.
H 300 mm 0.4 mm dia.
NH 300 mm 0.04 mm dia.
NHB Contact Omron Contact Omron
NM 200 mm 0.2 mm dia.
NT 210 mm 0.1 mm dia.
NV 210 mm 0.1 mm dia.
NVG 20 mm 0.3 mm dia.
VG 20 mm 0.3 mm dia.

21
E32 E32

J THROUGH-BEAM, SPECIAL PURPOSE TYPE (CONT.)

Application Features Appearance Type Detection distance Min. detectable Part number
object (opaque)
Chemical Teflon coated
Teflon-coated A 800 mm 0.9 mm dia. E32-T12F
resistant sensing head for
5 mm dia. x 20 mm DAN-HS 1,100 mm -- -- -- -- -- -- -- -- -- -- -- -- --
harsh chemical
(0.79 in L)
environments. DAN-LD 3,800 mm -- -- -- -- -- -- -- -- -- -- -- -- --
O
Operating
i ambientbi 2 m (6.56 ft) length
DAN-SM 3,000 mm 0.01 mm dia.
temperature: -- 30_C
to 70_C (-( - 22_F to F 300 mm 0.7 mm dia.
1 8 F) 1 mm ID
158_F);
fiber; 40 mm bending H 1,600 mm 0.7 mm dia.
radius NH 1,600 mm 0.12 mm dia.
NHB 220 mm 0.12 mm dia.
NM 1,000 mm 0.3 mm dia.
NT 1,070 mm 0.3 mm dia.
NV 1,070 mm 0.3 mm dia.
NVG 70 mm 0.6 mm dia.
VG 70 mm 0.6 mm dia.
Wafer Ultra narrow beam is A Contact Omron Contact Omron E32-T22S
d t ti
detection id l for
ideal f sensing
i
silicon wafers; 3.0 mm dia. DAN-HS 700 mm -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
10 mm bending g DAN-LD 2,300 mm -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
2 m (6.56 ft) length
radius
di
DAN-SM 1,900 mm 0.01 mm dia.
F Contact Omron Contact Omron
H 1,000 mm Contact Omron
NH 1,000 mm 0.08 mm dia.
NHB Contact Omron Contact Omron
NM 650 mm 0.4 mm dia.
NT 650 mm 0.2 mm dia.
NV 650 mm 0.2 mm dia.
NVG Contact Omron Contact Omron
VG Contact Omron Contact Omron

22
E32 E32

J THROUGH-BEAM, SPECIAL PURPOSE TYPE (CONT.)

Application Features Appearance Type Detection distance Min. detectable Part number
object (opaque)
Wafer Side view with A Contact Omron Contact Omron E32-T24S
3.5
3 5 x 3 mm
detection narrow field of vision; dia.
DAN-HS 500 mm -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
10 mm bending
radius DAN-LD 1,700 mm -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
2 m (6.56 ft) length DAN-SM 1,300 mm 0.01 mm dia.
F Contact Omron Contact Omron
H 700 mm Contact Omron
NH 700 mm 0.08 mm dia.
NHB Contact Omron Contact Omron
NM 450 mm 0.4 mm dia.
NT 480 mm 0.2 mm dia.
NV 480 mm 0.2 mm dia.
NVG Contact Omron Contact Omron
VG Contact Omron Contact Omron
Heat Side view with A Contact Omron Contact Omron E32-T84S
E32 T84S
resistant
i t t stainless
t i l steel
t l spiral
i l 3 mm dia.
tube sheath; resists DAN-HS 500 mm -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
200°C (392°F)
( ) at the DAN-LD 1,700 mm -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
fib tip;
fiber ti 25 mm
bending radius DAN-SM 1,300 mm 0.01 mm dia.
2 m (6.56 ft) length F Contact Omron Contact Omron
H Contact Omron Contact Omron
NH 700 mm 0.12 mm dia.
NHB Contact Omron Contact Omron
NM 450 mm 0.3 mm dia.
NT 480 mm 0.3 mm dia.
NV 480 mm 0.3 mm dia.
NVG Contact Omron Contact Omron
VG Contact Omron Contact Omron

23
E32 E32

J DIFFUSE, GENERAL PURPOSE TYPE

Application Features Appearance Type Detection distance Min. detectable Part number
(see note) object (gold wire)
High Concentric beam: A 75 mm 0.03 mm dia. E32-CC200
accuracy emitter in the center
DAN-HS 100 mm -- -- -- -- -- -- -- -- -- -- -- -- -- --
positioning and a ring of 16 M6 threaded head x
receivers in the 2.5 20 mm (0.79 in) L DAN-LD 400 mm -- -- -- -- -- -- -- -- -- -- -- -- -- --
mm dia.
di tip;
i 25
2 mm 2 m (6.56 ft) length
bending radius; DAN-SM 300 mm 0.01 mm dia.
1 mm ID fiber F 33 mm 0.03 mm dia.
H 150 mm 0.015 mm dia.
NH 150 mm 0.012 mm dia.
NHB 20 mm 0.012 mm dia.
NM 100 mm 0.015 mm dia.
NT 110 mm 0.012 mm dia.
NV 110 mm 0.012 mm dia.
NVG 10 mm 0.5 mm dia.
VG 10 mm 0.5 mm dia.
Flexible Thin fiber for small A 45 mm 0.03 mm dia. E32-D11
( i t
(resists object
bj t detection,
d t ti
breaking) ultra flexible cable; M6 threaded head x DAN-HS 80 mm -- -- -- -- -- -- -- -- -- -- -- -- -- --
17 mm (0.67
(0 67 in)
i )L
4 mm bending g DAN-LD 220 mm -- -- -- -- -- -- -- -- -- -- -- -- -- --
radius;
di 0.25
0 25 mm ID 2 m (6.56
( ft)
f ) length
l h
fiber DAN-SM 170 mm 0.01 mm dia.
F 20 mm 0.03 mm dia.
H 90 mm 0.015 mm dia.
NH 90 mm 0.012 mm dia.
NHB 12 mm 0.012 mm dia.
NM 60 mm 0.015 mm dia.
NT 65 mm 0.012 mm dia.
NV 65 mm 0.012 mm dia.
NVG 7 mm 0.5 mm dia.
VG 7 mm 0.5 mm dia.

Note: Sensing distance is based on sensing a white paper that has 90% reflectivity.

24
E32 E32

J DIFFUSE, GENERAL PURPOSE TYPE (CONT.)

Application Features Appearance Type Detection distance Min. detectable Part number
(see note) object (gold wire)
Long Compact threaded A 100 mm 0.015 mm dia. E32-D11L
distance sensing head;
M6 threaded head x DAN-HS 150 mm -- -- -- -- -- -- -- -- -- -- -- -- -- --
25 mm bending 17 mm (0.67
(0 67 in)
i )L
radius;; 1 mm ID fiber DAN-LD 500 mm -- -- -- -- -- -- -- -- -- -- -- -- -- --
2 m (6.56
( ft)
f ) length
l h
DAN-SM 400 mm 0.01 mm dia.
F 45 mm 0.2 mm dia.
H 200 mm 0.015 mm dia.
NH 200 mm 0.012 mm dia.
NHB 26 mm 0.012 mm dia.
NM 150 mm 0.015 mm dia.
NT 160 mm 0.012 mm dia.
NV 160 mm 0.012 mm dia.
NVG 10 mm 3.0 mm dia.
VG 10 mm 3.0 mm dia.
Flexible High
g flexibilityy with A 45 mm 0.03 mm dia. E32-D11R
( i t
(resists 1 mm minimum
i i M6 screw x 17 mm
breaking) bending radius (0.67 in) L DAN-HS 80 mm -- -- -- -- -- -- -- -- -- -- -- -- -- --

2 m (6.56 ft) length

DAN-LD 220 mm -- -- -- -- -- -- -- -- -- -- -- -- -- --
DAN-SM 170 mm 0.01 mm dia.
F Contact Omron Contact Omron
H Contact Omron Contact Omron
NH 90 mm 0.02 mm dia.
NHB Contact Omron Contact Omron
NM 60 mm 0.02 mm dia.
NT 65 mm 0.02 mm dia.
NV 65 mm 0.02 mm dia.
NVG 45 mm 0.03 mm dia.
VG 45 mm 0.03 mm dia.

Note: Sensing distance is based on sensing a white paper that has 90% reflectivity.

25
E32 E32

J DIFFUSE, GENERAL PURPOSE TYPE (CONT.)

Application Features Appearance Type Detection distance Min. detectable Part number
(see note) object (gold wire)
Flexible Flexible thin fiber A 7 mm 0.03 mm dia. E32-D21
(resists requires just 4 mm M3 threaded head x DAN-HS 10 mm -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
breaking) bending radius; 11 mm (0.43
(0 43 in) L
mount on moving g DAN-LD 40 mm -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
machinery
hi sections;
i 2 m (6.56
(6 56 ft) length
0.25 mm ID fiber DAN-SM 30 mm 0.01 mm dia.
F 3 mm 0.03 mm dia.
H 14 mm 0.015 mm dia.
NH 14 mm 0.012 mm dia.
NHB Contact Omron Contact Omron
NM 8 mm 0.015 mm dia.
NT 9 mm 0.012 mm dia.
NV 9 mm 0.012 mm dia.
NVG 1 mm 1.0 mm dia.
VG 1 mm 1.0 mm dia.
Long g Small sensing
g head A 25 mm 0.03 mm dia. E32-D21L
di t
distance i easy to
is t mount;t M4 threaded head x
25 mm bending DAN-HS 45 mm -- -- -- -- -- -- -- -- -- -- -- --
12 mm (0.47
(0 47 in) L
radius DAN-LD 160 mm -- -- -- -- -- -- -- -- -- -- -- --
2 m (6.56
(6 56 ft) length
DAN-SM 130 mm 0.01 mm dia.
F 11 mm 0.26 mm dia.
H 50 mm 0.015 mm dia.
NH 50 mm 0.012 mm dia.
NHB Contact Omron Contact Omron
NM 35 mm 0.015 mm dia.
NT 38 mm 0.012 mm dia.
NV 38 mm 0.012 mm dia.
NVG 1 mm 1.0 mm dia.
VG 1 mm 1.0 mm dia.

Note: Sensing distance is based on sensing a white paper that has 90% reflectivity.

26
E32 E32

J DIFFUSE, GENERAL PURPOSE TYPE (CONT.)

Application Features Appearance Type Detection distance Min. detectable Part number
(see note) object (gold wire)
Flexible Easy to mount sens-
sens A 7 mm 0.03 mm dia. E32-D21R
(resists ing head with high M3 screw x 11 mm DAN-HS 10 mm -- -- -- -- -- -- -- -- -- -- -- -- -- --
breaking) flexibility cable; 1 (0 43 in) L
(0.43
mm bending g radius DAN-LD 40 mm -- -- -- -- -- -- -- -- -- -- -- -- -- --
2 m (6.56
(6 56 ft) length
DAN-SM 30 mm 0.01 mm dia.
F Contact Omron Contact Omron
H Contact Omron Contact Omron
NH 14 mm 0.02 mm dia.
NHB NA NA
NM 8 mm 0.02 mm dia.
NT 9 mm 0.02 mm dia.
NV 9 mm 0.02 mm dia.
NVG NA NA
VG NA NA
Long g Small diameter head A 25 mm 0.03 mm dia. E32-D22L
di t
distance fit space-confined
fits fi d
installations; 25 mm DAN-HS 45 mm -- -- -- -- -- -- -- -- -- -- -- -- --
3 mm (0.12
(0 12 in) dia.
dia x
bending g radius; 15 mm (0.59
( in)) L DAN-LD 160 mm -- -- -- -- -- -- -- -- -- -- -- -- --
0 5 mm ID fiber
0.5 fib
(
2 m (6.56 ft)) length
g DAN-SM 130 mm 0.01 mm dia.
F 11 mm 0.26 mm dia.
H 50 mm 0.015 mm dia.
NH 50 mm 0.012 mm dia.
NHB Contact Omron Contact Omron
NM 35 mm 0.015 mm dia.
NT 38 mm 0.012 mm dia.
NV 38 mm 0.012 mm dia.
NVG 1 mm 1.0 mm dia.
VG 1 mm 1.0 mm dia.

Note: Sensing distance is based on sensing a white paper that has 90% reflectivity.

27
E32 E32

J DIFFUSE, GENERAL PURPOSE TYPE (CONT.)

Application Features Appearance Type Detection distance Min. detectable Part number
(see note) object (gold wire)
Precise Concentric beam: A 20 mm 0.03 mm dia. E32-D32
positioning light source in the DAN-HS 25 mm -- -- -- -- -- -- -- -- -- -- -- -- -- --
center with a ring of 2 mm (0.08
(0 08 in) dia.
dia
4 receivers in 2 mm (
x 15 mm (0.59 in)) DAN-LD 100 mm -- -- -- -- -- -- -- -- -- -- -- -- -- --
tip;
ti 29 mm (1.14
(1 14
dia. tip; 25 mm in) L overall DAN-SM 75 mm 0.01 mm dia.
bending radius;
0.25 mm ID fiber 2 m (6.56 ft) length F 9 mm 0.03 mm dia.
H 40 mm 0.015 mm dia.
NH 40 mm 0.012 mm dia.
NHB Contact Omron Contact Omron
NM 30 mm 0.015 mm dia.
NT 33 mm 0.012 mm dia.
NV 33 mm 0.012 mm dia.
NVG 2.5 mm 0.5 mm dia.
VG 2.5 mm 0.5 mm dia
Coaxial Concentric beam: A 40 mm 0.04 mm dia. E32-D32L
diffuse for light source in the DAN-HS 50 mm 0.01 mm dia.
precise center with a ring of 3 mm (0.12 in) dia.
x 15 mm (0.59 in) L DAN-LD 200 mm 0.01 mm dia.
positioning 16 receivers in 3 mm
dia. tip; 25 mm 2 m (6.56 ft) length DAN-SM 150 mm 0.01 mm dia.
bending radius
F 11 mm 1.1 mm dia,
H 80 mm 0.015 mm dia.
NH 80 mm 0.012 mm dia.
NHB Contact Omron Contact Omron
NM 60 mm 0.04 mm dia.
NT 65 mm 0.012 mm dia.
NV 65 mm 0.012 mm dia.
NVG 4 mm 1 mm dia.
VG 4 mm 1 mm dia.

Note: Sensing distance is based on sensing a white paper that has 90% reflectivity.

28
E32 E32

J DIFFUSE, GENERAL PURPOSE TYPE (CONT.)

Application Features Appearance Type Detection distance Min. detectable Part number
(see note) object (gold wire)
General Compact threaded A 75 mm 0.015 mm dia. E32-DC50
purpose head; short cable
M6 threaded head x DAN-HS Contact Omron Contact Omron
length; 25 mm bend-
ing
g radius 14 mm (0.55 in) L DAN-LD Contact Omron Contact Omron
50 cm (19 in) length DAN-SM Contact Omron Contact Omron
F 33 mm 0.015 mm dia.
H 150 mm 0.015 mm dia.
NH Contact Omron Contact Omron
NHB Contact Omron Contact Omron
NM Contact Omron Contact Omron
NT Contact Omron Contact Omron
NV Contact Omron Contact Omron
NVG Contact Omron Contact Omron
VG 10 mm 0.2 mm dia.
General Compact
p threaded A 75 mm 0.015 mm dia. E32-DC200
purpose h d 25 mm bend-
head; b d
ing radius; 1 mm ID M6 threaded head x DAN-HS 100 mm -- -- -- -- -- -- -- -- -- -- -- -- -- --
fiber 14 mm (0.55 in) L
DAN-LD 400 mm -- -- -- -- -- -- -- -- -- -- -- -- -- --
2 m (6.56 ft) length
DAN-SM 300 mm 0.01 mm dia.
F 33 mm 0.015 mm dia.
H 150 mm 0.015 mm dia.
NH 150 mm 0.012 mm dia.
NHB 20 mm 0.012 mm dia.
NM 100 mm 0.015 mm dia.
NT 110 mm 0.012 mm dia.
NV 110 mm 0.012 mm dia.
NVG 10 mm 0.2 mm dia.
VG 10 mm 0.2 mm dia.

Note: Sensing distance is based on sensing a white paper that has 90% reflectivity.

29
E32 E32

J DIFFUSE, GENERAL PURPOSE TYPE (CONT.)

Application Features Appearance Type Detection distance Min. detectable Part number
(see note) object (gold wire)
General Coiled cable ideal for A 22 mm 0.03 mm dia. E32-DC200C
purpose moving parts; 25 mm
DAN-HS Contact Omron Contact Omron
bending radius; M6 threaded head x
1 mm ID fiber 17 mm (0.67 in) L DAN-LD Contact Omron Contact Omron
Coiled 64 cm DAN-SM Contact Omron Contact Omron
(2 1 ft) L
(2.1 L; 2 m
(6.56 ft) extended F 10 mm 0.03 mm dia.
H 44 mm 0.015 mm dia.
NH 44 mm 0.012 mm dia.
NHB Contact Omron Contact Omron
NM 30 mm 0.015 mm dia.
NT 33 mm 0.012 mm dia.
NV 33 mm 0.012 mm dia.
NVG 2.5 mm 1.0 mm dia.
VG 2.5 mm 1.0 mm dia.
General Thin fiber with small A 18 mm 0.03 mm dia. E32-DC200E
purpose easy-to-mount
M3 threaded head x DAN-HS 30 mm -- -- -- -- -- -- -- -- -- -- -- -- --
head ; 25 mm bend-
head.; 11 mm (0.43
(0 43 in)
i )L
ing
g radius;; 0.5 mm DAN-LD 100 mm -- -- -- -- -- -- -- -- -- -- -- -- --
ID fiber
fib 2 m (6.56
(6 56 ft) length
l th
DAN-SM 80 mm 0.01 mm dia.
F 8 mm 0.03 mm dia.
H 36 mm 0.015 mm dia.
NH 36 mm 0.012 mm dia.
NHB Contact Omron Contact Omron
NM 20 mm 0.015 mm dia.
NT 22 mm 0.012 mm dia.
NV 22 mm 0.012 mm dia.
NVG 2 mm 1.0 mm dia.
VG 2 mm 1.0 mm dia.

Note: Sensing distance is based on sensing a white paper that has 90% reflectivity.

30
E32 E32

J DIFFUSE, GENERAL PURPOSE TYPE (CONT.)

Application Features Appearance Type Detection distance Min. detectable Part number
(see note) object (gold wire)
General Compact threaded A 75 mm 0.015 mm dia. E32-DC500
purpose head; 25 mm bend-
M6 threaded head x DAN-HS Contact Omron Contact Omron
ing radius; 1 mm ID
fiber 14 mm (0.55 in) L DAN-LD Contact Omron Contact Omron
5 m (16.4 ft) length DAN-SM Contact Omron Contact Omron
F 33 mm 0.015 mm dia.
H 150 mm 0.015 mm dia.
NH Contact Omron Contact Omron
NHB Contact Omron Contact Omron
NM Contact Omron Contact Omron
NT Contact Omron Contact Omron
NV Contact Omron Contact Omron
NVG Contact Omron Contact Omron
VG 10 mm 0.2 mm dia.
General Compact threaded A 75 mm 0.015 mm dia. E32-DC1000
purpose head; 25 mm bend-
M6 threaded head x DAN-HS Contact Omron Contact Omron
ing radius; 1 mm ID
14 mm (0.55 in) L
fiber DAN-LD Contact Omron Contact Omron
10 m (32.8 ft)
length DAN-SM Contact Omron Contact Omron
F 33 mm 0.015 mm dia.
H 150 mm 0.015 mm dia.
NH Contact Omron Contact Omron
NHB Contact Omron Contact Omron
NM Contact Omron Contact Omron
NT Contact Omron Contact Omron
NV Contact Omron Contact Omron
NVG Contact Omron Contact Omron
VG 10 mm 0.2 mm dia.

Note: Sensing distance is based on sensing a white paper that has 90% reflectivity.

31
E32 E32

J DIFFUSE, ARMORED TYPE

Application Features Appearance Type Detection distance Min. detectable Part number
(see note) object (gold wire)
General Can withstand A 80 mm 0.03 mm dia. E32 UDAT1 3F
E32-UDAT1-3F
purpose temperatures to
5/16 -- 24 thread x DAN-HS Contact Omron Contact Omron
150°C (302°F)
38.1 mm (1.5 in) L DAN-LD Contact Omron Contact Omron
0.91 m (3 ft) length DAN-SM Contact Omron Contact Omron
F Contact Omron Contact Omron
H Contact Omron Contact Omron
NH Contact Omron Contact Omron
NHB Contact Omron Contact Omron
NM Contact Omron Contact Omron
NT Contact Omron Contact Omron
NV Contact Omron Contact Omron
NVG Contact Omron Contact Omron
VG Contact Omron Contact Omron
General Can withstand A 65 mm 0.03 mm dia. E32-UDAT1-6F
E32 UDAT1 6F
purpose temperatures to
5/16 -- 24 thread x DAN-HS Contact Omron Contact Omron
150°C (302°F)
38.1 mm (1.5 in) L
DAN-LD Contact Omron Contact Omron
1.83 m (6 ft) length
DAN-SM Contact Omron Contact Omron
F Contact Omron Contact Omron
H Contact Omron Contact Omron
NH Contact Omron Contact Omron
NHB Contact Omron Contact Omron
NM Contact Omron Contact Omron
NT Contact Omron Contact Omron
NV Contact Omron Contact Omron
NVG Contact Omron Contact Omron
VG Contact Omron Contact Omron
General Can withstand E3JU-X 90 mm 0.05 mm dia. E32-UDBT1-3F
purpose temperatures to only
200°C (392°F) 5/16 -- 24 thread x
38.1 mm (1.5 in) L

0.91 m (3 ft) length

General Can withstand E3JU-X 80 mm 0.05 mm dia. E32-UDBT1-6F
purpose temperatures to only
5/16 -- 24 thread x
200°C (392°F) 38.1 mm (1.5 in) L

1.83 m (6 ft) length

32
E32 E32

J DIFFUSE, PROBE TYPE

Application Features Appearance Type Detection distance Min. detectable Part number
(see note) object (gold wire)
Needle Super thin tip for A 5 mm 0.015 mm dia. E32-D33
probe minute object detec- 3 mm 0.8 mm DAN-HS 6 mm -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
tion; 25 mm bending dia
dia. di
dia.
radius;; DAN-LD 21 mm -- -- -- -- -- -- -- -- -- -- -- -- -- --
0 2 mm ID fiber
0.25 fib 2 m (6.56
(6 56 ft) length
DAN-SM 16 mm 0.01 mm dia.
F 1.8 mm 0.03 mm dia.
H 10 mm 0.015 mm dia.
NH 10 mm 0.012 mm dia.
NHB NA NA
NM 6 mm 0.015 mm dia.
NT 7 mm 0.012 mm dia.
NV 7 mm 0.012 mm dia.
NVG NA NA
VG NA NA
Thin probe Probe for space-
space A 75 mm 0.03 mm dia.
E32-DC200B
confined sensing
M6 threaded head DAN-HS 100 mm -- -- -- -- -- -- -- -- -- -- -- --
areas; 25 mm 90 mm (3.54
( in)
i )
bendingg radius;; probe length DAN-LD 400 mm -- -- -- -- -- -- -- -- -- -- -- --
1 mm ID fiber
fib
2 m (6.56 ft) length DAN-SM 300 mm 0.01 mm dia.
F 33 mm 0.03 mm dia.
H 150 mm 0.015 mm dia.
NH 150 mm 0.012 mm dia.
NHB 20 mm 0.012 mm dia.
NM 100 mm 0.015 mm dia.
NT 110 mm 0.012 mm dia.
NV 110 mm 0.012 mm dia.
NVG 10 mm 1.0 mm dia.
VG 10 mm 1.0 mm dia.

Note: Sensing distance is based on sensing a white paper that has 90% reflectivity.

33
E32 E32

J DIFFUSE, PROBE TYPE (CONT.)

Application Features Appearance Type Detection distance Min. detectable Part number
(see note) object (gold wire)
Thin probe Probe for space-
space A 75 mm 0.03 mm dia. E32-DC200B4
confined sensing M6 threaded head DAN-HS 100 mm -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
areas; 25 mm 40 mm (1.57
(1 57 in)
bendingg radius;; probe length
p g DAN-LD 400 mm -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
1 mm ID fiber
fib
2 m (6.56 ft) length DAN-SM 300 mm 0.01 mm dia.
F 33 mm 0.03 mm dia.
H 150 mm 0.015 mm dia.
NH 150 mm 0.012 mm dia.
NHB Contact Omron Contact Omron
NM 100 mm 0.015 mm dia.
NT 110 mm 0.012 mm dia.
NV 110 mm 0.012 mm dia.
NVG 10 mm 1.0 mm dia.
VG 10 mm 1.0 mm dia.
Thin probe Sensing head with A 22 mm 0.03 mm dia.
E32-DC200D
90 mm probe; spiral
DAN-HS Contact Omron Contact Omron
coiled cable with-- M6 threaded head
stands repeated
p 90 mm (3.54 in) DAN-LD Contact Omron Contact Omron
stretching
hi from
f probe length
DAN-SM Contact Omron Contact Omron
reciprocating Coiled 64 cm
p
machine parts;; ((2.1 ft)) L;; F 10 mm 0.03 mm dia.
25
2 mm bending
b di 2 m (6.56
(6 56 ft)
radius; 1 mm ID fiber extended H 44 mm 0.015 mm dia.
NH 44 mm 0.012 mm dia.
NHB Contact Omron Contact Omron
NM Contact Omron Contact Omron
NT Contact Omron Contact Omron
NV Contact Omron Contact Omron
NVG Contact Omron Contact Omron
VG 2.5 mm 1.0 mm dia.

Note: Sensing distance is based on sensing a white paper that has 90% reflectivity.

34
E32 E32

J DIFFUSE, PROBE TYPE (CONT.)

Application Features Appearance Type Detection distance Min. detectable Part number
(see note) object (gold wire)
Thin probe Sensing head with A 22 mm 0.03 mm dia. E32-DC200D4
40 mm probe; spiral DAN-HS Contact Omron Contact Omron
coiled cable with-
with M6 threaded
th d d head
h d
stands repeated 40 mm (1.57 in) DAN-LD Contact Omron Contact Omron
stretching from probe
b length
l th
DAN-SM Contact Omron Contact Omron
reciprocating Coiled
C il d 64 cm
machine parts; (2.1 ft) L; F 10 mm 0.03 mm dia.
25 mm bending 2 m (6.56 ft)
extended H 44 mm 0.015 mm dia.
radius; 1 mm ID fiber
NH 44 mm 0.012 mm dia.
NHB Contact Omron Contact Omron
NM Contact Omron Contact Omron
NT Contact Omron Contact Omron
NV Contact Omron Contact Omron
NVG Contact Omron Contact Omron
VG 2.5 mm 1.0 mm dia.
Thin probe Sensing head with A 18 mm 0.03 mm dia.
E32-DC200F
90 mm probe; 25 M3 threaded head DAN-HS 30 mm -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
mm bending radius; 90 mm (3.54
(3 54 in)
0.5 mm ID fiber length
g probe
p DAN-LD 100 mm -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
2 m (6.56
( ft)) length
g DAN-SM 80 mm 0.01 mm dia.
F 8 mm 0.03 mm dia.
H 36 mm 0.015 mm dia.
NH 36 mm 0.012 mm dia.
NHB Contact Omron Contact Omron
NM 20 mm 0.015 mm dia.
NT 22 mm 0.012 mm dia.
NV 22 mm 0.012 mm dia.
NVG 2 mm 1.0 mm dia.
VG 2 mm 1.0 mm dia.

Note: Sensing distance is based on sensing a white paper that has 90% reflectivity.

35
E32 E32

J DIFFUSE, PROBE TYPE (CONT.)

Legend: NM . . . . . E3X-NM (4 channel auto-tuning amplifier)
A . . . . . . . E3X-A (General purpose amplifier) NT . . . . . E3X-NT (Auto-tuning amplifier: general purpose)
DAN-HS E3X-DAN (Digital amplifier-- high speed mode) NH . . . . . E3X-NH (High-precision, auto-tuning amplifier)
DAN-LD E3X-DAN (Digital amplifier-- long distance mode) NHB . . . . E3X-NHB (High-precision, blue LED, auto-tuning amp)
DAN-SM E3X-DAN (Digital amplifier-- standard distance mode) NV . . . . . E3X-NV21 (Water-resistant, red light source amplifier)
F . . . . . . . E3X-F (High performance amplifier-- high speed) NVG . . . . E3X-NVG21 (Water-resistant, green light source amp)
H . . . . . . . E3X-H11 (High gain amplifier) VG . . . . . E3X-VG (Mark sensing amplifier)
Application Features Appearance Type Detection distance Min. detectable Part number
(see note) object (gold wire)
Thin probe Sensing head with A 18 mm 0.03 mm dia. E32-DC200F4
40 mm probe; 25 M3 threaded head
40 mm (1.57 in) DAN-HS 30 mm -- -- -- -- -- -- -- -- -- -- -- -- -- --
mm bending radius;
0.5 mm ID fiber length probe DAN-LD 100 mm -- -- -- -- -- -- -- -- -- -- -- -- -- --
2 m (6.56 ft) length DAN-SM 80 mm 0.01 mm dia.
F 8 mm 0.03 mm dia.
H 36 mm 0.015 mm dia.
NH 36 mm 0.012 mm dia.
NHB Contact Omron Contact Omron
NM 20 mm 0.015 mm dia.
NT 22 mm 0.012 mm dia.
NV 22 mm 0.012 mm dia.
NVG 2 mm 1.0 mm dia.
VG 2 mm 1.0 mm dia.
Thin probe 90 mm length probe A 30 mm 0.03 mm dia. E32-DC9G
E32 DC9G
mounts directly to
DAN-HS Contact Omron Contact Omron
amplifier; stainless 1 2 mm dia.
1.2 dia
steel probe;
p ; 1 mm ID DAN-LD Contact Omron Contact Omron
fib with
fiber i h 25
2 mm
DAN-SM Contact Omron Contact Omron
bending radius
F 9 mm 0.03 mm dia.
H 60 mm 0.015 mm dia.
NH 60 mm 0.012 mm dia.
NHB Contact Omron Contact Omron
NM Contact Omron Contact Omron
NT Contact Omron Contact Omron
NV Contact Omron Contact Omron
NVG Contact Omron Contact Omron
VG 2.5 mm 1.0 mm dia.
Thin probe 40 mm length probe A 30 mm 0.03 mm dia. E32-DC9G4
E32 DC9G4
mounts directly to
DAN-HS Contact Omron Contact Omron
amplifier; stainless 1 2 mm dia.
1.2 dia
p
steel probe; ; 1 mm ID DAN-LD Contact Omron Contact Omron
fiber
fib withi h 25
2 mm
DAN-SM Contact Omron Contact Omron
bending radius
F 9 mm 0.03 mm dia.
H 60 mm 0.015 mm dia.
NH 60 mm 0.012 mm dia.
NHB Contact Omron Contact Omron
NM Contact Omron Contact Omron
NT Contact Omron Contact Omron
NV Contact Omron Contact Omron
NVG Contact Omron Contact Omron
VG 2.5 mm 1.0 mm dia.

Note: Sensing distance is based on sensing a white paper that has 90% reflectivity.

36
E32 E32

J DIFFUSE, SIDE BEAM TYPE

Application Features Appearance Type Detection distance Min. detectable Part number
(see note) object (gold wire)
Long Space saving, side
Space-saving, 6 mm dia. A 40 mm 0.03 mm dia. E32-D14L
distance; view probe for long
DAN-HS 50 mm -- -- -- -- -- -- -- -- -- -- --
side view sensing distances;
sensingg 1 mm ID fiber;; DAN-LD 150 mm -- -- -- -- -- -- -- -- -- -- --
2 mm bending
25 b di 2 m (6.56 ft) length DAN-SM 110 mm 0.01 mm dia.
radius
F 12 mm 0.5 mm dia.
H 40 mm 0.03 mm dia.
NH 40 mm 0.015 mm dia.
NHB Contact Omron Contact Omron
NM 40 mm 0.03 mm dia.
NT 44 mm 0.015 mm dia.
NV 44 mm 0.015 mm dia.
NVG 1.5 mm 1.0 mm dia.
VG 1.5 mm 1.0 mm dia.
Small Side view; space A 15 mm 0.03 mm dia.
2 mm dia.
dia E32-D24
object saving thin fiber;
3 mm dia. DAN-HS 10 mm -- -- -- -- -- -- -- -- -- -- -- -- -- --
0 5 mm ID fiber;
0.5
25 mm bending g DAN-LD 40 mm -- -- -- -- -- -- -- -- -- -- -- -- -- --
radius
di
2 m (6.56 ft) length DAN-SM 30 mm 0.01 mm dia.
F 4 mm 0.03 mm dia.
H 15 mm 0.03 mm dia.
NH 15 mm 0.012 mm dia.
NHB Contact Omron Contact Omron
NM 15 mm 0.03 mm dia.
NT 17 mm 0.012 mm dia.
NV 17 mm 0.012 mm dia.
NVG 1.6 mm 1.0 mm dia.
VG 1.6 mm 1.0 mm dia.

Note: Sensing distance is based on sensing a white paper that has 90% reflectivity.

37
E32 E32

J DIFFUSE, HIGH TEMPERATURE TYPE

Legend: NM . . . . . E3X-NM (4 channel auto-tuning amplifier)
A . . . . . . . E3X-A (General purpose amplifier) NT . . . . . E3X-NT (Auto-tuning amplifier: general purpose)
DAN-HS E3X-DAN (Digital amplifier-- high speed mode) NH . . . . . E3X-NH (High-precision, auto-tuning amplifier)
DAN-LD E3X-DAN (Digital amplifier-- long distance mode) NHB . . . . E3X-NHB (High-precision, blue LED, auto-tuning amp)
DAN-SM E3X-DAN (Digital amplifier-- standard distance mode) NV . . . . . E3X-NV21 (Water-resistant, red light source amplifier)
F . . . . . . . E3X-F (High performance amplifier-- high speed) NVG . . . . E3X-NVG21 (Water-resistant, green light source amp)
H . . . . . . . E3X-H11 (High gain amplifier) VG . . . . . E3X-VG (Mark sensing amplifier)
Application Features Appearance Type Detection distance Min. detectable Part number
(see note) object (gold wire)
Heat Resists 150°C;
150 C; fiber A 60 mm 0.03 mm dia. E32-D51
resistant sheath material: fluo-
M6 threaded head DAN-HS 100 mm -- -- -- -- -- -- -- -- -- -- -- --
roresin.
roresin
Operating
p g ambient 2 m (6.56 ft) length DAN-LD 300 mm -- -- -- -- -- -- -- -- -- -- -- --
t
temperature:
t -- 40_C
DAN-SM 230 mm 0.01 mm dia.
to 150_C (-- 40_F to
302_F); ); 1.5 mm ID F 26 mm 0.03 mm dia.
fib 35
fiber; 3 mm bending
b di
H 120 mm 0.03 mm dia.
radius
NH 120 mm 0.012 mm dia.
NHB 12 mm 0.012 mm dia.
NM 60 mm 0.03 mm dia.
NT 65 mm 0.012 mm dia.
NV 65 mm 0.012 mm dia.
NVG 5 mm 1.0 mm dia.
VG 5 mm 1.0 mm dia.
Heat Resists 300°C,
300 C, with A 45 mm 0.03 mm dia. E32-D61
E32 D61
resistant spiral tube; high
M6 threaded head DAN-HS 30 mm -- -- -- -- -- -- -- -- -- -- -- -- -- --
mechanical strength;
fiber sheath material: 2 m (6.56 ft) length DAN-LD 120 mm -- -- -- -- -- -- -- -- -- -- -- -- -- --
stainless
i l steel.
l
DAN-SM 90 mm 0.01 mm dia.
Operating ambient
temperature:
p F 20 mm 0.03 mm dia.
-- 40_C
0 C to 300_C
300 C
H 45 mm 0.03 mm dia.
(-- 40_F to 572_F);
1.4 mm ID fiber;; 25 NH 45 mm 0.012 mm dia.
mm bending
b di radiusdi
NHB Contact Omron Contact Omron
NM 45 mm 0.03 mm dia.
NT 50 mm 0.012 mm dia.
NV 50 mm 0.012 mm dia.
NVG 5 mm 1.0 mm dia.
VG 5 mm 1.0 mm dia.
Heat High temperature A 30 mm 0.03 mm dia. E32-D73
E32 D73
resistant glass core fiber with 1.25 mm dia DAN-HS 20 mm -- -- -- -- -- -- -- -- -- -- -- -- -- --
probe Resists
probe.
400°C,, with spiral
p M4 threaded head DAN-LD 80 mm -- -- -- -- -- -- -- -- -- -- -- -- -- --
tube;
b high
hi h mechani-
h i 2 m (6.56 ft) length DAN-SM 60 mm 0.01 mm dia.
cal strength; fiber
sheath material: F 17 mm 0.2 mm dia.
stainless
t i l steel.
t l
Operating ambient H 30 mm 0.03 mm dia.
temperature:
p NH 30 mm 0.012 mm dia.
-- 40_C tot 400_C
(-- 40_F to 752_F); NHB Contact Omron Contact Omron
1 mm ID fiber;; NM 30 mm 0.03 mm dia.
b di
25 mm bending
radius NT 33 mm 0.012 mm dia.
NV 33 mm 0.012 mm dia.
NVG 3 mm 1.0 mm dia.
VG 3 mm 1.0 mm dia.

Note: Sensing distance is based on sensing a white paper that has 90% reflectivity.

38
E32 E32

J DIFFUSE, CONVERGENT AND SPECIAL PURPOSE TYPES

Application Features Appearance Type Detection distance Min. detectable Part number
(see note) object (gold wire)
Chemical Teflon coated A 50 mm 0.03 mm dia. E32-D12F
resistant sensing head for
6 mm dia. DAN-HS 45 mm -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
harsh chemical
environments. 2 m (6.56 ft) length DAN-LD 120 mm -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
O
Operating
i ambient
bi
DAN-SM 95 mm 0.01 mm dia.
temperature: -- 30_C
to 70_C (-
( - 22_F to F 20 mm 0.5 mm dia.
1 8 F) 40
158_F); 0 mm
H 50 mm 0.03 mm dia.
bending radius;
1 mm ID fiber NH 50 mm 0.012 mm dia.
NHB 10 mm 0.012 mm dia.
NM 50 mm 0.03 mm dia.
NT 55 mm 0.012 mm dia.
NV 55 mm 0.012 mm dia.
NVG 4 mm 0.5 mm dia.
VG 4 mm 0.5 mm dia.
Wafer Convergent beam A 4 ± 2 mm 0.015 mm dia. E32-L24L
detection, suppresses back-
DAN-HS 4 ± 2 mm -- -- -- -- -- -- -- -- -- -- -- -- --
height ground objects; long
differences distance,, side view. 2 m (6.56 ft) length DAN-LD 4 ± 2 mm -- -- -- -- -- -- -- -- -- -- -- -- --
O
Operating
i ambient bi
DAN-SM 4 ± 2 mm 0.01 mm dia.
temperature: -- 40_C
to 105_C (-( - 40_F to F 4 ± 2 mm 0.015 mm dia.
221_F); 10 mm
H 4 ± 2 mm Contact Omron
bending radius
NH 4 ± 2 mm 0.012 mm dia.
NHB NA NA
NM 4 ± 2 mm 0.015 mm dia.
NT 4 ± 2 mm 0.012 mm dia.
NV 4 ± 2 mm 0.012 mm dia.
NVG NA NA
VG NA NA

Note: Sensing distance is based on sensing a white paper that has 90% reflectivity.

39
E32 E32

J DIFFUSE, CONVERGENT TYPES (CONT.)

Legend: NM . . . . . E3X-NM (4 channel auto-tuning amplifier)
A . . . . . . . E3X-A (General purpose amplifier) NT . . . . . E3X-NT (Auto-tuning amplifier: general purpose)
DAN-HS E3X-DAN (Digital amplifier-- high speed mode) NH . . . . . E3X-NH (High-precision, auto-tuning amplifier)
DAN-LD E3X-DAN (Digital amplifier-- long distance mode) NHB . . . . E3X-NHB (High-precision, blue LED, auto-tuning amp)
DAN-SM E3X-DAN (Digital amplifier-- standard distance mode) NV . . . . . E3X-NV21 (Water-resistant, red light source amplifier)
F . . . . . . . E3X-F (High performance amplifier-- high speed) NVG . . . . E3X-NVG21 (Water-resistant, green light source amp)
H . . . . . . . E3X-H11 (High gain amplifier) VG . . . . . E3X-VG (Mark sensing amplifier)
Application Features Appearance Type Detection distance Min. detectable Part number
(see note) object (gold wire)
Wafer Convergent beam A 3.3 mm 0.03 mm dia. E32-L25
detection, suppresses back- DAN-HS 3.3 mm -- -- -- -- -- -- -- -- -- -- -- -- --
height ground objects;
differences cable exits the side; 2 m (6.56 ft) length DAN-LD 3.3 mm -- -- -- -- -- -- -- -- -- -- -- -- --
25 mm bending DAN-SM 3.3 mm 0.01 mm dia.
radius
F 3.3 mm 0.5 mm dia.
H 3.3 mm 0.015 mm dia.
NH 3.3 mm 0.012 mm dia.
NHB NA NA
NM 3.3 mm 0.015 mm dia.
NT 3.3 mm 0.012 mm dia.
NV 3.3 mm 0.012 mm dia.
NVG NA NA
VG NA NA
Wafer Convergent beam A 3.3 mm 0.03 mm dia. E32-L25A
d
detection,
i suppresses back-
b k
DAN-HS 3.3 mm -- -- -- -- -- -- -- -- -- -- -- -- --
height ground objects;
differences cable exits the DAN-LD 3.3 mm -- -- -- -- -- -- -- -- -- -- -- -- --
b
bottom; 2
25 mm
2 m (6.56 ft) length DAN-SM 3.3 mm 0.01 mm dia.
bending radius
F 3.3 mm 0.5 mm dia.
H 3.3 mm 0.015 mm dia.
NH 3.3 mm 0.012 mm dia.
NHB NA NA
NM 3.3 mm 0.015 mm dia.
NT 3.3 mm 0.012 mm dia.
NV 3.3 mm 0.012 mm dia.
NVG NA NA
VG NA NA
Wafer Long distance con-
con A 7.2 ± 1.8 mm 0.015 mm dia. E32-L25L
detection, vergent beam type
DAN-HS 7.2 ± 1.8 mm -- -- -- -- -- -- -- -- -- -- -- -- --
height suppresses back- 2 m (6.56
(6 56 ft) length
differences ground objects;
g j ; DAN-LD 7.2 ± 1.8 mm -- -- -- -- -- -- -- -- -- -- -- -- --
cable
bl exits
i the
h side;
id
10 mm bending DAN-SM 7.2 ± 1.8 mm 0.01 mm dia.
radius F 7.2 ± 1.8 mm 0.015 mm dia.
H 7.2 ± 1.8 mm 0.015 mm dia.
NH 7.2 ± 1.8 mm 0.012 mm dia.
NHB NA NA
NM 7.2 ± 1.8 mm 0.015 mm dia.
NT 7.2 ± 1.8 mm 0.012 mm dia.
NV 7.2 ± 1.8 mm 0.012 mm dia.
NVG NA NA
VG NA NA

Note: Sensing distance is based on sensing a white paper that has 90% reflectivity.

40
E32 E32

J RETROREFLECTIVE TYPE
The table specifies the sensing characteristics of each fiber when used with the following amplifiers:
Legend: NM . . . . . E3X-NM (4 channel auto-tuning amplifier)
A . . . . . . . E3X-A (General purpose amplifier) NT . . . . . E3X-NT (Auto-tuning amplifier: general purpose)
DAN-HS E3X-DAN (Digital amplifier-- high speed mode) NH . . . . . E3X-NH (High-precision, auto-tuning amplifier)
DAN-LD E3X-DAN (Digital amplifier-- long distance mode) NHB . . . . E3X-NHB (High-precision, blue LED, auto-tuning amp)
DAN-SM E3X-DAN (Digital amplifier-- standard distance mode) NV . . . . . E3X-NV21 (Water-resistant, red light source amplifier)
F . . . . . . . E3X-F (High performance amplifier-- high speed) NVG . . . . E3X-NVG21 (Water-resistant, green light source amp)
H . . . . . . . E3X-H11 (High gain amplifier) VG . . . . . E3X-VG (Mark sensing amplifier)

Application Features Appearance Type Detection distance Min. detectable Part number
(see note) object (gold wire)
Detects Block style sensing A 150 to 1,500 mm 0.6 mm dia. E32-R16 +
shiny, head detects objects E39-R1
DAN-HS 150 to 1,500 mm -- -- -- -- -- -- -- -- -- -- -- -- -- --
transpar- over a long range;
Reflector
ent and 25 mm bending g E39-R1 DAN-LD 150 to 1,500 mm -- -- -- -- -- -- -- -- -- -- -- -- -- --
opaque radius
di
DAN-SM 150 to 1,500 mm 0.2 mm dia.
objects 2 m (6.56
(6 56 ft) length
(polarized))
(p F 50 to 700 mm 0.6 mm dia.
H 150 to 1,500 mm 0.6 mm dia.
NH 150 to 1,500 mm 0.5 mm dia.
NHB NA NA
NM 150 to 1,500 mm 1.9 mm dia.
NT 150 to 1,500 mm 0.5 mm dia.
NV 150 to 1,500 mm 0.5 mm dia.
NVG NA NA
VG NA NA
Detect Compact threaded A 10 to 250 mm 0.3 mm dia. E32-R21 +
transpar- sensing head is easy
DAN-HS 10 to 250 mm -- -- -- -- -- -- -- -- -- -- -- -- E39-R3
ent objects to install; 25 mm M6 Reflector
(polarized))
(p bending g radius. threaded E39-R3 DAN-LD 10 to 250 mm -- -- -- -- -- -- -- -- -- -- --
head
2 m (6.56 ft) length
DAN-SM 10 to 250 mm 0.1 mm dia.
F 20 to 230 mm 0.5 mm dia.
H 10 to 250 mm 0.3 mm dia.
NH 10 to 250 mm 0.3 mm dia.
NHB NA NA
NM 25 to 250 mm 0.6 mm dia.
NT 25 to 250 mm 0.3 mm dia.
NV 25 to 250 mm 0.3 mm dia.
NVG NA NA
VG NA NA

41
E32 E32

J BLOCK STYLE FIBER-OPTIC AMPLIFIERS

The following tables show the detection distance for selected fiber-optic cables in combination with Omron block style amplifiers. These
amplifiers offer specialized capabilities to solve particular application problems.

J E3MC-(M)Y RGB COLOR SENSOR

Through-beam Fiber-optic Cables

Application Features Appearance Detection distance Part number

(see note)
General Compact threaded head; 25 mm bending radius; 1 mm 30 mm E32-TC200
purpose ID fiber
M4 threaded head x
14 mm (0.55 in) L

2 m (6.56 ft) length

Long Compact M4, head, 1.mm ID fiber; 25 mm bending 60 mm E32-T11L
distance radius; 1.4 mm ID fiber
M4 threaded head x
11 mm (0.43 in) L

2 m (6.56 ft) length

Area 10 mm wide beam, long sensing distance; 25 mm 200 mm E32-T16
sensing bending radius; 1 mm ID fiber
10 mm

2 m (6.56 ft) length

Long M14 with magnifying lens extends sensing distance; 1,100 mm E32-T17L
distance ideal for explosion-- proof applications; 25 mm bending
radius; 1 mm ID fiber M14 threaded head
x 23 mm (0.91 in) L

10 m (32.8 ft) length

Note: The E3MC-(M)Y discriminates red, blue, and yellow films at the above distances.

Diffuse Fiber-optic Cables

Application Features Appearance Detection distance Part number

(see note)
High Concentric beam: emitter in the center and a ring of 16 5 mm E32-CC200
precision receivers in the 2.5 mm dia. tip; 25 mm bending radius;
positioning 1 mm ID fiber; coaxial diffuse M6 threaded head x
20 mm (0.79 in) L

2 m (6.56 ft) length

General Compact threaded head; 25 mm bending radius; 1 mm 5 mm E32-DC200
purpose ID fiber
M6 threaded head x
14 mm (0.55 in) L

2 m (6.56 ft) length

Long Compact threaded sensing head; 5 mm E32-D11L
distance 25 mm bending radius; 1 mm ID fiber
M6 threaded head x
17 mm (0.67 in) L

2 m (6.56 ft) length

Precise Concentric beam: light source in the center with a ring 4.5 mm E32-D32L
positioning of 16 receivers in 3 mm dia. tip; 25 mm bending radius; 3 mm (0.12 in) dia.
coaxial diffuse x 15 mm (0.59 in) L

2 m (6.56 ft) length

Note: The E3MC-(M)Y discriminates eleven colors at the above distances. For a typical example, nine colors are discriminated at a
sensing distance of 12 mm.

42
E32 E32

J E3XA-CC4A ANALOG FIBER-OPTIC AMPLIFIER

Through-beam Fiber-optic Cables
Application Features Appearance Detection distance Min. detectable object Part number
General Compact threaded head; 80 mm (600 mm*) 0.2 mm dia. E32-TC200
purpose 25 mm bending radius; 1 mm
ID fiber M4 threaded head x
14 mm (0.55 in) L

2 m (6.56 ft) length

General M3; possible to mount the 80 mm 0.2 mm dia. E32-TC200A
purpose reflective side-view conver-
M3 threaded head x
sion attachment (E39-F5); 12.5 mm (0.49 in) L
25 mm bending radius; 1 mm
ID fiber 2 m (6.56 ft) length
Thin probe Probe for space-confined 80 mm 0.2 mm dia. E32-TC200B
sensing areas; 25 mm bend-
M4 threaded head
ing radius; 1 mm ID fiber 90 mm (3.54 in)
probe length

2 m (6.56 ft) length

Thin probe Probe for space-confined 80 mm 0.2 mm dia. E32-TC200B4
sensing areas; 25 mm bend-
M4 threaded head
ing radius; 1 mm ID fiber 40 mm (1.57 in)
probe length

2 m (6.56 ft) length

General M3; suitable for detecting 20 mm 0.1 mm dia. E32-TC200E
purpose minute objects; 25 mm M3 threaded head x
bending radius; 0.5 mm ID 11 mm (0.43 in) L
fiber 2 m (6.56 ft) length
Bendable Sensing head with 90 mm 20 mm 0.1 mm dia. E32-TC200F
probe probe; 25 mm bending radius
M3 threaded head
90 mm (3.54 in)
length probe

2 m (6.56 ft) length

Bendable Sensing head with 90 mm 20 mm 0.1 mm dia. E32-TC200F4
probe probe; 25 mm bending radius
M3 threaded head
40 mm (1.57 in)
length probe

2 m (6.56 ft) length

Long Built-in lens provides long 90 mm 0.8 mm dia. E32-T14
distance sensing distance; each
sensing head has two 3.2 mm
screw mounting holes; 25 mm
bending radius; 1 mm ID fiber 2 m (6.56 ft) length
Mark/edge Ideal for mark sensing or belt 10 mm 0.8 mm dia. E32-G14
detection alignment; no optical axis
adjustment required; easy to
mount; 1 mm ID fiber
10 mm

2 m (6.56 ft) length

Area Multiple heads allow shape 100 mm 0.3 mm dia. E32-M21
sensing recognition; 0.5 mm ID fiber

M3 threaded head
x11 mm (0.43 in) L

2 m (6.56 ft) length

Note: *Value in parentheses represents the sensing distance of the fiber when the E39-F1 lens is attached to its tip.

43
E32 E32
Retroreflective Fiber-- optic Cables with E3XA-CC4A Amplifier

Application Features Appearance Detection distance Min. detectable object Part number
Detect Compact threaded sensing 30 to 200 mm 0.3 mm dia. E32-R21 +
transpar- head is easy to install. E39-R3
ent and M6 Reflector
shiny threaded E39-R3
objects head
2 m (6.56 ft) length

Diffuse Fiber-optic Cables with E3XA-CC4A Amplifier

Application Features Appearance Detection distance Min. detectable object Part number
General Compact threaded head; 30 mm 0.03 mm dia. E32-DC200
purpose 25 mm bending radius; 1 mm
ID fiber M6 threaded head x
14 mm (0.55 in) L

2 m (6.56 ft) length

General M3; possible to mount the 30 mm 0.03 mm dia. E32-CC200
purpose reflective side-view
conversion attachment M6 threaded head x
(E39-F5); 25 mm bending 20 mm (0.79 in) L
radius; 1 mm ID fiber 2 m (6.56 ft) length
Thin probe Probe for space-confined 30 mm 0.03 mm dia. E32-DC200B
sensing areas; 25 mm bend-
M6 threaded head
ing radius; 1 mm ID fiber 90 mm (3.54 in)
probe length

2 m (6.56 ft) length

Thin probe Probe for space-confined 30 mm 0.03 mm dia. E32-DC200B4
sensing areas; 25 mm bend-
M6 threaded head
ing radius; 1 mm ID fiber 40 mm (1.57 in)
probe length

2 m (6.56 ft) length

General M3; suitable for 7 mm 0.03 mm dia. E32-DC200E
purpose detecting minute objects;
M3 threaded head x
25 mm bending radius; 11 mm (0.43 in) L
0.5 mm ID fiber
2 m (6.56 ft) length
Thin probe Sensing head with 90 mm 7 mm 0.03 mm dia. E32-DC200F
probe; 25 mm bending radius; M3 threaded head
0.5 mm ID fiber 90 mm (3.54 in)
length probe

2 m (6.56 ft) length

Thin probe Sensing head with 40 mm 7 mm 0.03 mm dia. E32-DC200F4
probe; 25 mm bending radius; M3 threaded head
0.5 mm ID fiber 40 mm (1.57 in)
length probe

2 m (6.56 ft) length

44
E32 E32

J E3JU-X LIMIT SWITCH STYLE (IR LED)

Armored Through-beam Fiber-optic Cables

Application Features Appearance Detection distance Min. detectable object Part number
General Can withstand temperatures 400 mm 0.25 mm dia. E32-UTBT1-3F
purpose to 200_C (392_F)
5/16-- 24 thread x
38.1 mm (1.5 in) L

0.91 m (3 ft) length

General Can withstand temperatures 400 mm 0.25 mm dia. E32-UTBT1-6F

purpose to 200_C (392_F)
5/16-- 24 thread x
38.1 mm (1.5 in) L

1.83 m (6 ft) length

Armored Diffuse Fiber-optic Cables

Application Features Appearance Detection distance Min. detectable Part number

object (gold wire)
General Can withstand temperatures 90 mm 0.05 mm dia. E32-UDBT1-3F
purpose to 200_C (392_F)
5/16 -- 24 thread x
38.1 mm (1.5 in) L

0.91 m (3 ft) length

General Can withstand temperatures 80 mm 0.05 mm dia. E32-UDBT1-6F

purpose to 200_C (392_F)
5/16 -- 24 thread x
38.1 mm (1.5 in) L

1.83 m (6 ft) length

45
E32 E32

J E3JU-XR LIMIT SWITCH STYLE (RED LED)

Through-beam Fiber-optic Cables

Application Features Appearance Detection distance Min. detectable object Part number
General Compact threaded head; 200 mm 0.2 mm dia. E32-TC200
purpose 25 mm bending radius;
1 mm ID fiber M4 threaded head x
14 mm (0.55 in) L

2 m (6.56 ft) length

Flexible, Ideal for mounting on moving 135 mm 0.5 mm dia. E32-T11
resists section; 4 mm bending radius; M4 threaded head
breaking 1.5 mm ID fiber x 11.7 mm (0.46 in) L

2 m (6.56 ft) length

Compact M3 head ideal for 39 mm 0.2 mm dia. E32-T21
mounting on moving sections; M3 threaded head x
4 mm bending radius; 0.5 mm 11 mm (0.43 in) L
ID fiber
2 m (6.56 ft) length
Minute 2 mm dia. head fits in space- 50 mm 0.2 mm dia. E32-T22
objects confined areas; 25 mm
2 mm dia. (0.8 in) x
bending radius; 0.5 mm ID 22 mm (0.87 in)
fiber
2 m (6.56 ft) length
Heat Resists 150°C; fiber sheath 150 mm 1.0 mm dia. E32-T51
resistant material: fluororesin. M4 threaded head x
Operating ambient 17 mm (0.67 in) L
temperature: -- 40_C to 150_C
2 m (6.56 ft) length
(-- 40_F to 302_F); 35 mm
bending radius; 1.5 mm ID
fiber
General Armored glass fiber-- optic 200 mm 0.2 mm dia. E32-UTAT1-3F
purpose cable can withstand tempera-
tures to 200_C (392_F) 5/16--24 thread x
38.1 mm (1.5 in) L

0.91 m (3 ft) length

General Armored glass fiber-- optic 170 mm 0.2 mm dia. E32-UTAT1-6F

purpose cable can withstand tempera-
tures to 200_C (392_F) 5/16--24 thread x
38.1 mm (1.5 in) L

1.83 m (6 ft) length

46
E32 E32
Diffuse Fiber-optic Cables with E3JU-XR Amplifiers

Application Features Appearance Detection distance Min. detectable object Part number
General Compact threaded head; 75 mm 0.015 mm dia. E32-DC200
purpose 25 mm bending radius; 1 mm
ID fiber M6 threaded head x
14 mm (0.55 in) L

2 m (6.56 ft) length

General Compact threaded head; 45 mm 0.03 mm dia. E32-D11
purpose 4 mm bending radius;
0.25 mm ID fiber M6 threaded head x
17 mm (0.67 in) L

2 m (6.56 ft) length

General Compact threaded head; 7 mm 0.03 mm dia. E32-D21
purpose 4 mm bending radius; M3 threaded head x
0.25 mm ID fiber 11 mm (0.43 in) L

2 m (6.56 ft) length

General Compact threaded head; 18 mm 0.03 mm dia. E32-D32
purpose 25 mm bending radius;
0.25 mm ID fiber; coaxial 2 mm (0.08 in) dia.
x 15 mm (0.59 in)
tip; 29 mm (1.14
in) L overall

2 m (6.56 ft) length

Heat Resists 150°C; fiber sheath 60 mm 0.03 mm dia. E32-D51
resistant material: fluororesin.
Operating ambient M6 threaded head
temperature: -- 40_C to 150_C 2 m (6.56 ft) length
(-- 40_F to 302_F);
35 mm bending radius;
1.5 mm ID fiber
General Armored glass fiber-optic 80 mm 0.03 mm dia. E32-UDAT1-3F
purpose cable can withstand tempera-
tures to 150_C (302_F) 5/16--24 thread x
38.1 mm (1.5 in) L

0.91 m (3 ft) length

General Armored glass fiber-optic 65 mm 0.03 mm dia. E32-UDAT1-6F
purpose cable can withstand tempera-
tures to 150_C (302_F) 5/16--24 thread x
38.1 mm (1.5 in) L

1.83 m (6 ft) length

47
E32 E32

J E3A2-X AND E3S-X3 BLOCK STYLE AMPLIFIERS

The table specifies the sensing characteristics of each fiber when used with the following amplifiers:
A2X: E3A2-X Slim Amplifier with Plug-in Output
SX3: E3S-X3 Rugged Metal Body DC Amplifier

Through-beam Fiber-optic Cables

Application Features Appearance Type Detection distance Min. detectable Part number
object (opaque)
General Compact threaded A2X 120 mm 1.0 mm dia. E32-TC200
purpose head; 25 mm M4 threaded head x
bending radius; 14 mm (0.55 in) L
1 mm ID fiber SX3
2 m (6.56 ft) length
General M3; possible to A2X 120 mm 1.0 mm dia. E32-TC200A
purpose mount the reflective
side view conversion M3 threaded head x
7 mm (0.28 in) L
attachment
(E39-F5); 25 mm 2 m (6.56 ft) length SX3
bending radius;
1 mm ID fiber
Thin probe Probe for space- A2X 120 mm 1.0 mm dia. E32-TC200B
confined sensing M4 threaded head
areas; 25 mm 90 mm (3.54
(3 54 in)
bending radius; probe length SX3
1 mm ID fiber
2 m (6.56 ft) length
General Coiled cable ideal for A2X 100 mm 1.0 mm dia. E32-TC200C
purpose moving parts; 25 mm
bending radius; M4 threaded head x
1 mm ID fiber 11 mm (0.43
(0 43 in) L
SX3
56.5 cm (1.85 ft) L;
2 m (6.56 ft)
extended
Thin probe Sensing head with A2X 100 mm 1.0 mm dia. E32-TC200D
90 mm probe; spiral
coiled cable with- M4 threaded head
stands repeated 90 mm (3.54 in)
stretching from probe length
reciprocating SX3
56.6 cm (1.85 ft);
machine parts; 25 2 m (6.56 ft)
mm bending radius; extended
1 mm ID fiber
General Thin fiber with small A2X 35 mm 0.5 mm dia. E32-TC200E
purpose easy-to-mount M3 threaded head x
head ; 25 mm
head.; 11 mm (0.43
(0 43 in)
i )L
bending radius; SX3
0.5 mm ID fiber 2 m (6.56 ft) length

Thin probe Sensing head with A2X 35 mm 0.5 mm dia. E32-TC200F

90 mm probe; M3 threaded head
25 mm bending 90 mm (3.54
(3 54 in)
radius; 0.5 mm ID length probe SX3
fiber
2 m (6.56 ft) length

48
E32 E32
Diffuse Fiber-optic Cables for E3A2-X and E3S-X3 Amplifiers

Application Features Appearance Type Detection distance Standard object Part number
(see note)
High Concentric beam: A2X 50 mm 30 x 30 mm E32-CC200
accuracy emitter in the center
positioning and a ring of 16 M6 threaded head x
receivers in the 2.5
25 20 mm (0.79
(0 79 in) L
mm dia. tip; 25 mm SX3
2 m (6.56 ft) length
bending radius;
1 mm ID fiber
General Compact threaded A2X 50 mm 30 x 30 mm E32-DC200
purpose head; 25 mm bend-
ing radius; 1 mm ID M6 threaded head x
fiber 14 mm (0.55 in) L SX3
2 m (6.56 ft) length
Thin probe Probe for space-- A2X 50 mm 30 x 30 mm
E32-DC200B
confined sensing
areas; 25 mm M6 threaded head
90 mm (3.54
(3 54 in)
i )
bending radius; probe length SX3
1 mm ID fiber
2 m (6.56 ft) length
General Coiled cable ideal for A2X 15 mm 30 x 30 mm E32-DC200C
purpose moving parts; 25 mm
bending radius; M6 threaded head x
1 mm ID fiber 17 mm (0.67
(0 67 in) L
SX3
64 cm (2.1 ft) L
coiled; 2 m (6.56 ft)
extended.

Thin probe Sensing head with A2X 15 mm 30 x 30 mm

E32-DC200D
90 mm probe; spiral
coiled cable with- M6 threaded head
stands repeated 90 mm (3.54 in)
stretching from probe length
reciprocating SX3
64 cm (2.1 ft) L
machine parts; 25 coiled; 2 m (6.56 ft)
mm bending radius; extended
1 mm ID fiber
General Thin fiber with small A2X 12 mm 15 x 15 mm E32-DC200E
purpose easy-to-mount
M3 threaded head x
head ; 25 mm
head.; 11 mm (0.43 in) L
bending radius; SX3
0.5 mm ID fiber 2 m (6.56 ft) length

Thin probe Sensing head with A2X 12 mm 15 x 15 mm

E32-DC200F
90 mm probe; 25 M3 threaded head
mm bending radius; 90 mm (3.54
(3 54 in)
0.5 mm ID fiber length probe SX3
2 m (6.56 ft) length

Note: A standard object for the diffuse fiber-optic cables is a Kodak 90% reflectance white card.

49
E32 E32

Specifications
J THROUGH-BEAM FIBER-OPTIC CABLES

Part number Operating ambient Operating relative Permissible bending Core Sheath material Enclosure
temperature humidity radius material rating
E32-T11 -- 40°C to 70°C (-- 40°F 35% to 85% with no 4 mm min. PMMA Vinyl chloride IEC IP67
t 158°F) with
to ith no icing
i i condensation
d ti
E32-T11L 25 mm min. Black polyethylene
E32-T11R 1 mm min. Copolymer vinyl
chloride
E32-T12L 25 mm min. Black polyethylene
E32-T17L 25 mm min. Black polyethylene
E32-T21 4 mm min. Vinyl chloride
E32-T21L 25 mm min. Black polyethylene
E32-T21R 1 mm min. Copolymer vinyl
chloride
E32-T22 25 mm min. Black polyethylene
E32-T22L 25 mm min. Black polyethylene
E32-TC50 25 mm min. Black polyethylene
E32-TC200
E32-TC200A 25 mm min. Black polyethylene
E32-TC200C 25 mm min. Black polyethylene
E32-TC200E 25 mm min. Black polyethylene
E32-TC500 25 mm min. Black polyethylene
E32-TC1000
E32-UTAT1-3F -- 40°C to 150°C (-- 40°F 25 mm min. Glass SUS 303 head,
E32-UTAT1-6F to 302°F) with no icing SUS 304 sheath
E32-UTBT1-3F -- 40°C to 200°C (-- 40°F 25 mm min. Glass SUS 303 head,
E32-UTBT1-6F to 392°F) with no icing SUS 304 sheath
E32-T33-1 -- 40°C to 70°C (-- 40°F 25 mm min. PMMA Black polyethylene,
to 158°F) with no icing stainless steel head
E32-TC200B 25 mm min. Black polyethylene
E32-TC200B4
E32-TC200D 25 mm min. Black polyethylene
E32-TC200D4
E32-TC200F 25 mm min. Black polyethylene
E32-TC200F4
E32-T14 25 mm min. Black polyethylene
E32-T14L 25 mm min. Black polyethylene
E32-T16 25 mm min. Black polyethylene
E32-T16P 10 mm min. Vinyl chloride IEC IP50
E32-T24 25 mm min. Black polyethylene IEC IP67
E32-T51* -- 40°C to 150°C (-- 40°F 35 mm min. PMMA Fluoride resin
to 302°F) with no icing
E32-T61 -- 40°C to 300°C (-- 40°F 25 mm min. Glass 304 stainless steel
to 572°F) with no icing
E32-G14 -- 40°C to 70°C (-- 40°F 25 mm min. PMMA Black polyethylene
t 158°F) with
to ith no icing
i i
E32-M21 25 mm min. Black polyethylene
E32-T12F -- 30°C to 70°C (-- 22°F 40 mm min. Teflon-covered
to 158°F) with no icing black polyethylene

*When used continuously between -- 40°C and 130°C (-- 40°F and 266°F)
Teflon is a registered trademark of the Dupont Company and the Mitsui Dupont Chemical Company for their fluoride resin.

50
E32 E32

J THROUGH-BEAM FIBER-OPTIC CABLES (CONTINUED)

Part number Operating ambient Operating relative Permissible bending Core Sheath material Enclosure
temperature humidity radius** material rating
E32-T22S* -- 40°C to 70°C (-- 40°F 35% to 85% with no 10 mm min. PMMA Copolymer vinyl IEC IP67
t 158°F) with
to ith no icing
i i condensation
d ti chloride
hl id
E32-T24S*
E32-T84S* -- 40°C to 200°C (-- 40°F 25 mm min. Glass 304 stainless steel
to 392°F) with no icing

*13 mm dia. beam size at a distance of 200 mm

**Average at 30% of sensing distance

J DIFFUSE FIBER-OPTIC CABLES*

Part number Operating ambient Operating relative Permissible bending Core Sheath material Enclosure
temperature humidity radius material rating
E32-CC200 -- 40°C to 70°C (-- 40°F 35% to 85% with no 25 mm min. PMMA Black polyethylene IEC IP67
t 158°F) with
to ith no icing
i i condensation
d ti
E32-D11 4 mm min. Vinyl chloride
E32-D11L 25 mm min. Black polyethylene
E32-D11R 1 mm min. Copolymer vinyl
chloride
E32-D21 4 mm min. Vinyl chloride
E32-D21L 25 mm min. Black polyethylene
E32-D21R 1 mm min. Black polyethylene
E32-D22L 25 mm min. Black polyethylene
E32-D32
E32-D32L
E32-DC50,
E32-DC200
E32-DC200C
E32-DC200E
E32-DC500,
E32-DC1000
E32-UDAT1-3F, -- 40°C to 150°C (-- 40°F 25 mm min. Glass SUS 303 head,
E32-UDAT1-6F to 302°F) with no icing SUS 304 sheath
E32-UDBT1-3F, -- 40°C to 200°C (-- 40°F 25 mm min. Glass SUS 303 head,
E32-UDBT1-6F to 392°F) with no icing SUS 304 sheath
E32-D33 -- 40°C to 70°C (-- 40°F 25 mm min. PMMA Black polyethylene
t 158°F) with
to ith no icing
i i
E32-DC200B,
E32-DC200B4
E32-DC200D,
E32-DC200D4
E32-DC200F,
E32-DC200F4
E32-DC9G, 12.5 mm min. Stainless steel
E32-DC9G4
E32-D14L 25 mm min. Black polyethylene
E32-D24 25 mm min. Black polyethylene
E32-D51** -- 40°C to 150°C (-- 40°F 35 mm min. Fluoride resin
to 302°F) with no icing

*Differential travel is 20% of max. detection distance. With E3X-H11 amplifier, this is adjustable between 0% and 20%.
**When used continuously between -- 40°C and 130°C (-- 40°F and 266°F)

51
E32 E32

J DIFFUSE FIBER-OPTIC CABLES (CONTINUED)*

Part number Operating ambient Operating relative Permissible bending Core Sheath material Enclosure
temperature humidity radius material rating
E32-D61 -- 40°C to 300°C (-- 40°F 35% to 85% with no 25 mm min. Glass 304 stainless steel IEC IP67
to 572°F) with no icing condensation
E32-D73 -- 40°C to 400°C (-- 40°F 25 mm min. Glass 304 stainless steel IEC IP67
to 752°F) with no icing
E32-D12F -- 30°C to 70°C (-- 22°F 35% to 85% with no 40 mm min. PMMA Teflon-covered IEC IP67
to 158°F) with no icing condensation black polyethylene
E32-L24L** -- 40°C to 105°C (-- 40°F 10 mm min. (aver- PMMA Reinforced poly- IEC IP50
to 221°F) with no icing age 10% decrease ethylene
in sensing distance)
E32-L25 -- 40°C to 70°C (-- 40°F 25 mm min. PMMA Black polyethylene IEC IP50
t 158°F) with
to ith no icing
i i
E32-L25A 25 mm min. PMMA Black polyethylene IEC IP50
E32-L25L** -- 40°C to 105°C (-- 40°F 10 mm min. (aver- PMMA Reinforced poly- IEC IP50
to 221°F) with no icing age 10% decrease ethylene
in sensing distance)

*Differential travel is 20% of max. detection distance. With E3X-H11 amplifier, this is adjustable between 0% and 20%.
**Beam size is 2 mm dia.
Teflon is a registered trademark of the Dupont Company and the Mitsui Dupont Chemical Company for their fluoride resin.

J POLARIZED RETROREFLECTIVE FIBER-OPTIC CABLES

Part number Operating ambient Operating relative Permissible bending Core Sheath material Enclosure
temperature humidity radius material rating
E32-R16 with -- 25°C to 55°C 35% to 85% 25 mm min. PMMA Black polyethylene IEC IP66
E39-R1 reflector (-- 13°F to 131°F) with
no icing
E32-R21 with -- 40°C to 70°C IEC IP67
E39-R3 reflector (-- 40°F to 158°F) with
no icing

52
E32 E32

Engineering Data
J EXCESS GAIN RATIO
With standard sensing object. With standard target at maximum sensitivity.

E32-TC200 with E3X-DAN E32-DC200 with E3X-DAN E32-D21L with E3X-DAN

amplifier (Through-beam) amplifier (Reflective) amplifier (Reflective)

Excess gain ratio

Long distance

Long distance
Long distance
Oper-
Oper- Oper-
Standard ating
ating ating level
level level

Standard High speed Standard

High speed High speed

Distance (mm)
Distance (m) Distance (mm)

Through-beam Type, General Purpose

E32-T11 with E3X-A11 amplifier E32-T11 with E3JU-XR amplifier

100 100
50
30
Excess gain ratio

Excess gain ratio

10 10
5

1
1
Operating level

0.1
0 50 100 150 200 250 300 350 400 0 100 200 300

Sensing distance (mm) Sensing distance (mm)

53
E32 E32

E32-T11L with E3X-A, E3X-F E32-T11L with E3X-H11 amplifier E32-T11L + E39-F1 with
and E3X-VG amplifiers E3X-H11 amplifier

6 Sensing distance Sensing distance

Sensing distance

5
Excess gain ratio

Excess gain ratio

Excess gain ratio
4

3
E3X-Aj

2
E3X-Fj

1
Operating level
E3X-VGj

0 200 400 600 800 1000

Sensing distance (mm) Sensing distance (mm) Sensing distance (m)

E32-T11L with E39-F2 and E32-T11L with E39-F3 and E32-T11L with E3X-NH amplifier
E3X-H11 amplifier E3X-H11 amplifier

Sensing distance Sensing Sensing distance

object

Excess gain ratio

Sensing distance
Excess gain ratio
Excess gain ratio

Sensing distance (mm) Sensing distance (mm) Sensing distance (mm)

54
E32 E32

J EXCESS GAIN RATIO (CONT.)

Through-beam Type, General Purpose

E32-T11L with E39-F1 E32-T11R with E39-F2 and E32-T11L with E39-F3 and
and E3X-NH amplifier E3X-NH amplifier E3X-NH amplifier

Sensing distance Sensing distance

Target

Sensing distance
Excess gain ratio

Excess gain ratio

Sensing distance (mm) Sensing distance (mm) Sensing distance (mm)
Sensing distance

E32-T11L with E3X-NVG amplifier E32-T11R with E3X-NH amplifier E32-T12L with E3X-A, E3X-F and
E3X-VG amplifiers
6
Sensing distance Sensing distance

5
Excess gain ratio

Excess gain ratio

Detection distance

Excess gain ratio

W1E3X-NH 3
E3X-Aj
E3X-NVG
2
E3X-Fj

Operating level 1
Operating level
E3X-VGj

Sensing distance (mm) 0 200 400 600 800 1000

Sensing distance (mm) Sensing distance (mm)

E32-T17L with E3X-A, E3X-F E32-T17L with E3X-H11 amplifier E32-T17L with E3X-NH amplifier
and E3X-VG amplifiers

Sensing distance
Sensing distance Sensing distance
Excess gain ratio

Excess gain ratio

E3X-Aj

E3X-Fj

Operating level
E3X-VGj

Sensing distance (m) Sensing distance (m) Sensing distance (m)

55
E32 E32

J EXCESS GAIN RATIO (CONT.)

Through-beam Type, General Purpose

E32-T21 with E3X-A amplifier E32-T21 with E3JU-XR amplifier E32-T21 with E3X-H amplifier
100 100
Sensing distance
50
30
Excess gain ratio

Excess gain ratio

10
5

1
Operating level

0.1
0 25 50 75 100

Sensing distance (mm)

0 20 40 60 80 100 120

Sensing distance (mm) Sensing distance (mm)

E32-T21L with E3X-A, E3X-F and E32-T21L with E3X-NH amplifier E32-T21R with E3X-NH amplifier
E3X-VG amplifiers

Sensing distance Sensing distance

Sensing distance

Excess gain ratio

Excess gain ratio
Excess gain ratio

E3X-NH

E3X-Aj

E3X-Fj

Operating level
E3X-VGj
Sensing distance (mm)

Sensing distance (mm) Sensing distance (mm)

E32-T22 with E3X-A and E32-T22 with E3JU-XR amplifier E32-T22L with E3X-A, E3X-F and
E3S-X3 amplifiers E3X-VG amplifiers

100
Sensing distance
Excess gain ratio

10
Excess gain ratio

E3X-A
Excess gain ratio

E3S-X3 E3X-Aj
Operating level E3X-Fj
0.1
0 50 100 150
Operating level
Sensing distance (mm) E3X-VGj

Sensing distance (mm)

56
E32 E32

J EXCESS GAIN RATIO (CONT.)

Through-beam Type, General Purpose

E32-TC50/TC200/TC500/TC1000 E32-TC200 with E39-F1 and E32-TC200 with E39-F2 and

with E3X-A11 amplifier E3X-A amplifier E3X-A amplifier
Excess gain ratio

Excess gain ratio

Excess gain ratio
Operating level Operating level Operating level

Sensing distance (mm)

Sensing distance (m) Sensing distance (mm)

E32-TC200 with E3X-H11 amplifier E32-TC200 with E39-F1 and E32-TC200 with E3X-DA amplifier
E3X-H11 amplifier

Excess gain ratio

Sensing distance Sensing distance

Long distance
Excess gain ratio

Excess gain ratio

Oper-
ating
level

Standard
High speed

Sensing distance (m)

Sensing distance (mm) Sensing distance (m)

E32-TC200 with E3X-NM and E32-TC200 with E3X-NH amplifier E32-TC200 with E39-F1 and
E3X-NT amplifiers E3X-NH amplifier

Sensing distance Sensing distance Sensing distance

Excess gain ratio
Excess gain ratio

Excess gain ratio

E3X-NT

E3X-NM

Sensing distance (mm) Sensing distance (mm) Sensing distance (m)

57
E32 E32

J EXCESS GAIN RATIO (CONT.)

Through-beam Type, General Purpose

E32-TC200 with E3X-NV amplifier E32-TC200 with E3JU-XR amplifier E32-TC200 with E3XA-CC4A
analog output amplifier

100 Vcc = 12 V

Detection distance

Analog output (mA)

E3X-NV
Excess gain ratio

Excess gain ratio

Adjuster: MAX.
Adjuster: MID.
1

Adjuster: MIN.
0.1
0 200 400 600
Sensing distance (mm)
Sensing distance (mm) Sensing distance (mm)

E32-TC200 with E3X-DA amplifier E32-TC200A with E3X-A11 amplifier E32-TC200A with E3XA-CC4A analog
in analog mode output amplifier

Vcc = 12 V

Analog output (mA)

Monitor output (V)

Excess gain ratio

Adjuster: MAX.
Adjuster: MID.

Operating level
Adjuster: MIN.

Sensing distance (mm)

Sensing distance (mm)
Sensing distance (mm)

E32-TC200C with E3XA-CC4A E32-TC200E with E3X-A11 amplifier E32-TC200E with E3XA-CC4A
analog output amplifier analog output amplifier

Vcc = 12 V
Vcc = 12 V
Adjuster: MAX.
Adjuster: MAX.
Excess gain ratio
Analog output (mA)

Analog output (mA)

Operating level

Sensing distance (mm)

Sensing distance (cm) Sensing distance (cm)

58
E32 E32

J EXCESS GAIN RATIO (CONT.)

Through-beam, Armored Type
E32-UTAT1-3F with E3X-A11 amplifier E32-UTAT1-3F with E3JU-XR amplifier E32-UTAT1-6F with E3X-A11 amplifier

100 100 100

50 50
30 30

Excess gain ratio

10
10 10
5 5

1
1
Operating level
0.1 Operating level
0 200 400 600

Sensing distance (mm)

0 50 100 150 200 250 300 350
0 50 100 150 200 250 300 350
Sensing distance (mm)
Sensing distance (mm)

E32-UTAT1-6F with E3JU-XR amplifier E32-UTBT1-3F with E3JU-X amplifier E32-UTBT1-6F with E3JU-X amplifier
100 100 100
Excess gain ratio

Excess gain ratio

10 10
10

1 1
1

0.1 0.1 0.1

0 200 400 600 0 300 600 900
0 300 600 900
Sensing distance (mm) Sensing distance (mm) Sensing distance (mm)

Through-beam, Probe Type

E32-TC200B/TC200B4 with E32-TC200B with E3XA-CC4A E32-TC200D with E3XA-CC4A
E3X-A11 amplifier analog output amplifier analog output amplifier

Vcc = 12 V
Vcc = 12 V Adjuster: MAX.
Excess gain ratio

Analog output (mA)

Adjuster: MAX.
Adjuster: MID.

Operating level

Adjuster: MIN.

Sensing distance (mm)

Sensing distance (mm)
Sensing distance (cm)

59
E32 E32

J EXCESS GAIN RATIO (CONT.)

Through-beam, Probe Type
E32-TC200F/TC200F4 with E32-TC200F with E3XA-CC4A
E3X-A11 amplifier analog output amplifier
Vcc = 12 V
Excess gain ratio

Analog output (mA)

Operating level

Sensing distance (mm)

Sensing distance (cm)

Through-beam, Side Beam Type

E32-T14 with E3X-A11 amplifier E32-T14L with E3X-A, E3X-F E32-T14L with E3X-H11 amplifier
and E3X-VG amplifiers

Sensing distance
Sensing distance
Excess gain ratio

Excess gain ratio

E3X-Aj

E3X-Fj

Operating level
E3X-VGj

Sensing distance (mm) Sensing distance (mm) Sensing distance (mm)

60
E32 E32

J EXCESS GAIN RATIO (CONT.)

Through-beam, Side Sensing Type

E32-T14L with E3X-NH amplifier E32-T16 with E3X-A11 amplifier E32-T16 with E3X-NH amplifier

Sensing distance Sensing distance

Excess gain ratio

Excess gain ratio
Excess gain ratio

Operating level

20 40 60 80
Sensing distance (mm) Sensing distance (cm)
Sensing distance (cm)

E32-T16 with E3X-H11 amplifier E32-T16 with E3XA-CC4A analog E32-T16 with slits and
output amplifier E3XA-CC4A amplifier
Sensing distance
Analog output (mA)

Analog output (mA)

Excess gain ratio

Adjuster: MAX. Slit width: 1 mm

Adjuster: MID.

Slit width: 0.5 mm

Adjuster: MIN.

Sensing distance (m) Sensing distance (cm) Sensing distance (cm)

E32-T24 with E3X-A11

and E3S-X3 amplifiers
Excess gain ratio

E3X-A

E3S-X3

Operating level

Sensing distance (mm)

61
E32 E32

J EXCESS GAIN RATIO (CONT.)

Through-beam, High Temperature Type

E32-T51 with E3X-A11 amplifier E32-T51 with E3X-NH amplifier

Excess gain ratio

Operating level
2

0 50 100 150 200 250 300

Sensing distance (mm) Sensing distance (mm)

E32-T51 with E39-F1 and E3X-NH amplifier E32-T51 with E3JU-XR amplifier

8 100
Excess gain ratio

7
Excess gain ratio

6
10
5

4
1
3

1 0.1
0 200 400 600
0 500 1000 1500 2000 Sensing distance (mm)
Sensing distance (mm)

E32-T61 with E3X-A and E3S-X3 amplifiers

Excess gain ratio

E3X-A

E3S-X3

Operating level

Sensing distance (mm)

62
E32 E32

J EXCESS GAIN RATIO (CONT.)

Through-beam, Special Purpose Type

E32-M21 with E3X-A11 amplifier E32-M21 with E3XA-CC4A E32-T12F with E3X-A, E3X-F
analog output amplifier and E3X-VG amplifiers

Analog output (mA)

Excess gain ratio

Adjuster: MAX.

Adjuster: MID.

Adjuster: MIN.

Sensing distance (mm) Sensing distance (cm) Sensing distance (cm)

E32-T22S with E3X-NH amplifier E32-T24S with E3X-NH amplifier E32-T84S with E3X-NH amplifier

Sensing distance Sensing distance Sensing distance

Excess gain ratio

Sensing distance (mm) Sensing distance (mm) Sensing distance (mm)

Diffuse, General Purpose

E32-CC200 with E3XA-CC4A E32-D11 with E3X-A11 amplifier E32-D11 with E3JU-XR amplifier
analog output amplifier

Sensing object: Vcc = 12 V 100 100

3 x 3 cm white mat paper 50
30
Excess gain ratio
Analog output (mA)

Excess gain ratio

10
10
5
Adjuster: MAX.
1
Adjuster: MID. 1

Operating level
0.1
Adjuster: MIN. 0 25 50 75 100

0 10 20 30 40 50 60 70 Sensing distance (mm)

Sensing distance (cm) Sensing distance (mm)

63
E32 E32

J EXCESS GAIN RATIO (CONT.)

Diffuse, General Purpose

E32-D11L with E3X-A, E3X-F and E32-D11L with E3X-H11 amplifier E32-D11L with E3X-NH amplifier
E3X-VG amplifiers
6
Sensing distance Sensing distance Sensing distance

5
Sensing object
Excess gain ratio

Sensing

Excess gain ratio

Target

Excess gain ratio

object
4

2
E3X-Aj
E3X-Fj

1
Operating level
E3X-VGj
0 40 80 120 160 200
Sensing distance (mm)
Sensing distance (mm) Sensing distance (mm)

E32-D11L with E3X-NVG amplifier E32-D11L with E3X-H11 amplifier E32-D11R with E3X-NH amplifier

Sensing distance Sensing distance

Excess gain ratio

Sensing target
Detectable
Excess gain ratio

Sensing
object object
Excess gain ratio

E3X-NH
E3X-NVG

Operating level

Sensing distance (mm)

Sensing distance (m)
Sensing distance (mm)

E32-D21 with E3X-A11 amplifier E32-D21 with E3JU-XR amplifier E32-D21L with E3X-A, E3X-F, and
E3X-VG amplifiers
100
100
Sensing distance
50
Excess gain ratio

30 Sensing object
Excess gain ratio
Excess gain ratio

5
1
E3X-Aj

1 E3X-Fj
0.1
Operating level 0 5 10 15

Sensing distance (mm) E3X-VGj Operating level

0 2 4 6 8 10 12 14 16

Sensing distance (mm) Sensing distance (mm)

64
E32 E32

J EXCESS GAIN RATIO (CONT.)

Diffuse, General Purpose

E32-D21L with E3X-DA amplifier E32-D21L with E3X-NA amplifier E32-D21R with E3X-NH amplifier
Excess gain ratio

Sensing distance Sensing distance

Excess gain ratio

Sensing target
Target

Excess gain ratio

Long distance

Oper-
ating
level

Standard
High speed

Sensing distance (mm) Sensing distance (mm)

Sensing distance (mm)

E32-D21L with E3X-A, E3X-F E32-D32 with E3X-A11 amplifier E32-D32 with E3JU-XR amplifier
and E3X-V amplifiers

100
Sensing distance

Excess gain ratio

Sensing object
Excess gain ratio

1
E3X-Aj

E3X-F j Operating level

0.1
0 10 20 30 40
E3X-VGj Operating level
Sensing distance (mm)

Sensing distance (mm) Sensing distance (mm)

E32-DC50/DC200/DC500/DC1000 E32-DC200 with E3X-DA amplifier E32-DC200 with E3X-A11 amplifier

with E3X-A11 amplifier

Sensing distance
Excess gain ratio

Excess gain ratio

Long distance

Oper-
ating
level

Operating level High speed Standard

Sensing distance (mm)

Sensing distance (mm) Sensing distance (mm)

65
E32 E32

J EXCESS GAIN RATIO (CONT.)

Diffuse, General Purpose

E32-DC200 with E3X-NM and E32-DC200 with E3X-NH amplifier E32-DC200 with E3X-NV amplifier
E3X-NT amplifiers
Sensing distance
Sensing distance

E3X-NV
Target
Excess gain ratio

Excess gain ratio

Detectable

Excess gain ratio

object

Sensing distance (mm)

Sensing distance (mm)
Sensing distance (mm)

E32-DC200 with E3JU-XR amplifier E32-DC200 with E3XA-CC4A analog E32-DC200 with E3X-DA amplifier in
output amplifier analog mode
100
Sensing object: Vcc = 12 V
3 x 3 cm white mat paper
Excess gain ratio

Analog output (mA)

Monitor output (V)

1 Adjuster: MAX.

Adjuster: MID.

0.1

0 50 100 150 200

Adjuster: MIN.
Sensing distance (mm) Sensing distance (mm)
Sensing distance (cm)

E32-DC200 with E3XA-CC4A analog E32-DC200 with E3XA-CC4A analog

output amplifier output amplifier

Sensing object: Vcc = 12 V Sensing object:

3 x 3 cm white mat paper Adjuster: MAX. 1.5 x 1.5 cm white mat paper
Vcc = 12 V
Adjuster: MAX.
Analog output (mA)

Analog output (mA)

Sensing distance (cm) Sensing distance (cm)

66
E32 E32

J EXCESS GAIN RATIO (CONT.)

Diffuse, Armored Type

E32-UDAT1-3F with E3X-A11 amplifier E32-UDAT1-3F with E3JU-XR amplifier E32-UDAT1-6F with E3X-A11 amplifier

100 100 100

50 50
30

Excess gain ratio

30
Excess gain ratio

Excess gain ratio

10
10 10

5 5
1

1 1
0.1
Operating level Operating level
0 50 100 150 200

Sensing distance (mm)

0 50 100 150 200 250 300 350
0 50 100 150 200 250 300 350
Sensing distance (mm)
Sensing distance (mm)

E32-UDAT1-6F with E3X-A11 amplifier E32-UDBT1-3F with E3JU-X amplifier E32-UDBT1-6F with E3JU-X amplifier
100
100 100
Excess gain ratio
Excess gain ratio

Excess gain ratio

10 10 10

1 1
1

0.1 0.1 0.1

0 50 100 150 200 0 50 100 150 200 0 50 100 150 200

Sensing distance (mm) Sensing distance (mm) Sensing distance (mm)

Diffuse, Probe Type

E32-D33 with E3X-A11 amplifier E32-DC200B/B4 with E3XA-CC4A E32-DC200D/D4 with E3XA-CC4A
analog amplifier analog amplifier

Sensing object: Vcc = 12 V Sensing object: Vcc = 12 V

3 x 3 cm white mat paper 3 x 3 cm white mat paper Adjuster: MAX.
Analog output (mA)
Excess gain ratio

Analog output (mA)

Adjuster: MAX.

Adjuster: MID.

Operating level
w/E3X-A

Adjuster: MIN.

Sensing distance (cm)

Sensing distance (mm) Sensing distance (cm)

67
E32 E32

J EXCESS GAIN RATIO (CONT.)

Diffuse, Probe Type

E32-DC200F/F4 with E3XA-CC4A analog amplifier E32-DC9G/E32-DC9G4 with E3X-A11 amplifier

Sensing object:
1.5 x 1.5 cm white mat paper
Vcc = 12 V

Excess gain ratio

Adjuster: MAX.
Analog output (mA)

Operating level

Sensing distance (cm) Sensing distance (mm)

Diffuse, Side Sensing Type

E32-D14L with E3X-AE3X-F and E3X-VG amplifiers E32-D24 with E3X-A11 amplifier

6
Sensing distance

5
Excess gain ratio
Excess gain ratio

E3X-Aj
2
Operating level
E3X-Fj
1
E3X-VGj

0 40 80 120 160 200

Sensing distance (mm)
Sensing distance (mm)

Diffuse, High Temperature Type

E32-D51 with E3X-A11 amplifier E32-D51 with E3JU-XR amplifier

100
Excess gain ratio

Excess gain ratio

Operating level
0.1
0 50 100 150 200

Sensing distance (mm)

68
E32 E32

J EXCESS GAIN RATIO (CONT.)

Diffuse, High Temperature Type

E32-D61 with E3X-A11 amplifier E32-D73 with E3X-A11 amplifier

Excess gain ratio

E3X-A

Operating level Operating level

Sensing distance (mm) Sensing distance (mm)

Diffuse, Special Purpose Type

E32-D12F with E3X-A, E3X-F and E32-L25, E32-L25A with E3X-A11 amplifier
E3X-VG amplifiers

6 Sensing distance

5
Sensing object
Excess gain ratio

Excess gain ratio

3
E3X-Aj
2
E3X-Fj
Operating level
1
Operating level
E3X-VGj
0 40 80 120 160 200

Sensing distance (mm) Sensing distance (mm)

Retroreflective Type
E32-R21 with E3X-A11 amplifier E32-R16 with E3X-A11 amplifier E32-R21 with E3XA-CC4A analog
output amplifier
Vcc = 12 V
Adjuster: MAX.
Analog output (mA)
Excess gain ratio

Excess gain ratio

0.1
0 1 2 3 4
Sensing distance (mm) Sensing distance (mm) Sensing distance (m)

69
E32 E32

J PARALLEL OPERATING RANGE (TYPICAL)

At max. sensitivity. (Use for optical axis adjustment at installation.)

E32-TC200 with E3X-DAN E32-T11R with E3X-DAN E32-T11 with E3X-DAN

amplifier (Through-beam) amplifier (Through-beam) amplifier (Through-beam)
Distance Y (mm)

Distance Y (mm)
Distance Y (mm)
Long distance

Standard
High speed

High speed High speed

Standard Standard

Long distance Long distance

Distance X (m) Distance X (m) Distance X (m)

J OPERATING RANGE (TYPICAL)

With standard sensing object at max. sensitivity. (Use for the positioning of the object and Sensor.)

E32-DC200 with E3X-DAN E32-D33 with E3X-DAN E32-L25L with E3X-DAN

amplifier (Reflective) amplifier (Reflective) amplifier (Convergent Reflective)

Distance Y (mm)
Distance Y (mm)
Distance Y (mm)

Standard
High speed
Long distance Standard

High speed

Long distance

Distance X (mm) Distance X (mm) Distance X (mm)

J PARALLEL OPERATING RANGE (TYPICAL) MARK DETECTION SENSOR E3X-DAB11-N

At max. sensitivity. (Use for optical axis adjustment at installation.)

E32-TC200 with E3X-DAN E32-TC200+E39-F1 with E3X-DAN

amplifier (Through-beam) amplifier (Through-beam)
Distance Y (mm)

Distance Y (mm)

Long distance

Standard
High speed

High Standard Long

speed distance

Distance X (m) Distance X (m)

70
E32 E32

J OPERATING RANGE (TYPICAL)

With standard sensing object at max. sensitivity. (Use for the positioning of the object and Sensor.)

E32-DC200 with E3X-DAN E32-CC200 with E3X-DAN E32-D11L with E3X-DAN

amplifier (Reflective) amplifier (Reflective) amplifier (Convergent Reflective)

Distance Y (mm)
Distance Y (mm)
Distance Y (mm)

Long
distance

High speed High speed Standard High speed Standard

Standard
Long distance Long distance

Distance X (mm) Distance X (mm) Distance X (mm)

J OPERATING RANGE
Through-beam, General Purpose Type

E32-T11 with E3X-DAN amplifier E32-TC200 (Through-beam) E32-T11R (Through-beam)

Parallel operating range Y (mm)

Distance Y (mm)

Distance Y (mm)
Long
distance

Standard
High speed

High speed High speed

Standard
Standard

Long distance Long distance

Sensing distance X (mm) Distance X (m) Distance X (m)

E32-T11 with E3JU-XR amplifier E32-T11 with E3X-NH amplifier

60
Parallel operating range Y (mm)

Parallel operating range Y (mm)

-20

-40

-60
0 100 200 300 Sensing distance X (mm)
Sensing distance (mm)

71
E32 E32

E32-T11L with E3X-A, E3X-F, E32-T11L with E39-F1 and E3X-A,

and E3X-VG amplifiers E3X-F, and E3X-VG amplifiers
Parallel operating range Y (mm)

Parallel operating range Y (mm)

E3X-VGj E3X-Aj
E3X-VGj E3X-Aj

E3X-Fj E3X-Fj

Sensing distance X (mm) Sensing distance X (mm)

E32-T11L with E39-F2 and E3X-A, E32-T11L with E39-F3 and E3X-A
E3X-F and E3X-VG amplifiers and E3X-F amplifiers

Parallel operating range Y (mm)

4
Parallel operating range Y (mm)

E3X-Aj
E3X-VGj E3X-Aj
3
Y
2 X
E3X-Fj E3X-Fj
1

0
1
2

4
Sensing distance X (mm)

Sensing distance X (mm)

E32-T11L with E3X-H11 amplifier E32-T11L with E39-F1 and E3X-H11 amplifier
Parallel operating range Y (mm)

Parallel operating range Y (mm)

Sensing distance X (mm) Sensing distance X (mm)

72
E32 E32

J OPERATING RANGE (CONT.)

Through-beam, General Purpose Type

E32-T11L with E39-F2 and E3X-H11 amplifier E32-T11L with E3X-NH amplifier

Parallel operating range Y (mm)

Sensing distance X (mm)

E32-T11L with E39-F1 and E32-T11L with E39-F2 and E32-T11L with E39-F3 and
E3X-NH amplifier E3X-NH amplifier E3X-NH amplifier
Parallel operating range Y (mm)

Parallel operating range Y (mm)

Target

Sensing distance X (m) Sensing distance X (mm) Sensing distance X (mm)

E32-T11L with E3X-NVG amplifier

Sensing distance X (mm)

E32-T11R with E3X-NH amplifier E32-T11R with E3X-DAN amplifier

Parallel operating range Y (mm)
Parallel operating range Y (mm)

High speed
Standard

Long distance

Sensing distance X (mm) Sensing distance X (m)

73
E32 E32

J OPERATING RANGE (CONT.)

Through-beam, general purpose type

E32-T12L with E3X-A, E3X-F, and E3X-VG amplifiers E32-T12L with E3X-NVG amplifier
Parallel operating range Y (mm)

E3X-VGj E3X-Aj

E3X-Fj

Sensing distance X (mm) Sensing distance X (mm)

E32-T17L with E3X-A, E3X-F and E3X-VG amplifiers E32-T17L with E3X-H11 amplifier
Parallel operating range Y (mm)

Parallel operating range Y (mm)

E3X-Aj

E3X-VGj

E3X-Fj

Sensing distance X (m) Sensing distance X (mm)

E32-T17L with E3X-NH amplifier E32-T21 with E3JU-XR amplifier E32-T21 with E3X-NH amplifier
Parallel operating range Y (cm)

Parallel operating range Y (cm)

Parallel operating range Y (mm)

-5

-10

-15
0 20 40 60 80
Sensing distance X (m) Sensing distance X (mm)
Sensing distance (mm)
E32-T21L with E3X-A, E3X-F, and E3X-VG amplifiers E32-T21L with E3X-H11 amplifier
Parallel operating range Y (mm)

Parallel operating range Y (mm)

E3X-Fj E3X-Aj

Sensing distance X (mm) Sensing distance X (mm)

74
E32 E32

J OPERATING RANGE (CONT.)

Through-beam, General Purpose Type

E32-T21L with E3X-NH amplifier E32-T21R with E3X-NH amplifier

Parallel operating range Y (mm)

Sensing distance X (mm) Sensing distance X (mm)

E32-T22 with E3X-A, E3X-F, and E32-T22 with E3X-NH amplifier E32-T22 with E3JU-XR amplifier
E3X-VG amplifiers Parallel operating range Y (mm) 30

Parallel operating range Y (mm)

E3X-VGj E3X-Aj 20

10
E3X-Fj
0

-10

-20

-30
0 40 80 120
Sensing distance X (mm)
Sensing distance (mm)
Sensing distance X (mm)
E32-T22L with E3X-A, E3X-F, and E3X-VG amplifiers E32-TC50 with E3X-A11 amplifier
Parallel operating range Y (mm)
Parallel operating range Y (mm)

E3X-Aj E3X-Aj
E3X-VGj
E3X-VGj

E3X-Fj E3X-Fj

Sensing distance X (mm)

E32-TC200 with E3X-A11 amplifier E32-TC200 with E3X-DAN amplifier

Parallel operating range Y (mm)
Parallel operating range Y (mm)

E3X-Aj
E3X-VGj

E3X-Fj

High speed
Standard

Long distance

Sensing distance X (mm) Sensing distance X (m)

75
E32 E32

J OPERATING RANGE (CONT.)

Through-beam, General Purpose Type

E32-TC200 with E3X-H11 amplifier E32-TC200 with E3X-NM and E3X-NT amplifiers
Parallel operating range Y (mm)

Parallel operating range Y (mm)

Sensing distance X (mm)
Sensing distance X (mm)
E32-TC200 with E3X-NH amplifier E32-TC200 with E39-F2 and E32-TC200 with E3JU-XR amplifier
E3X-NH amplifier
80
Parallel operating range Y (mm)
Parallel operating range Y (mm)

Parallel operating range Y (mm)

20
0

-20

-40

-60

-80
Sensing distance X (mm) Sensing distance X (mm) 0 100 200 300 400
Sensing distance (mm)

E32-TC200 with E3X-NV amplifier E32-TC200A with E3X-A, E3X-F, and E3X-VG amplifiers
Parallel operating range Y (mm)

Parallel operating range Y (mm)

E3X-Aj
E3X-VGj

E3X-Fj

E3X-NV

Sensing distance X (mm) Sensing distance X (mm)

76
E32 E32

J OPERATING RANGE (CONT.)

Through-beam, General Purpose Type

E32-TC200C with E3X-A11 amplifier E32-TC200E with E3X-A, E3X-F and E3X-VG amplifiers
Parallel operating range Y (mm)

Parallel operating range Y (mm)

E3X-VGj E3X-Aj
60

40
E3X-Fj
20

0 50 100 150 200 250

Sensing distance (mm)

Sensing distance X (mm)
Through-beam, Armored Type
E32-UTAT1-3F with E3JU-XR amplifier E32-UTAT1-6F with E3JU-XR amplifier
120

Parallel operating range Y (mm)

120
Parallel operating range Y (mm)

80 80

40 40

0
0

-40 -40

-80 -80

-120 -120
0 120 240 360 480 0 100 200 300 400

Sensing distance (mm) Sensing distance (mm)

E32-UTBT1-3F with E3JU-X amplifier E32-UTBT1-6F with E3JU-X amplifier

120 120
Parallel operating range Y (mm)

Parallel operating range Y (mm)

80 80

40 40

0 0

-40 -40

-80 -80

-120 -120
0 200 400 600 800 0 200 400 600 800

Sensing distance (mm) Sensing distance (mm)

77
E32 E32

J OPERATING RANGE (CONT.)

Through-beam, Probe Type

E32-TC200B and E32-TC200B4 with E3X-A11 amplifier E32-TC200D and E32-TC200D4 with E3X-A11 amplifier

Parallel operating range Y (mm)

80
Parallel operating range Y (mm)

E3X-Aj
60
E3X-VGj
40
E3X-Fj
20

0 50 100 150 200 250

Sensing distance (mm)

Sensing distance X (mm)
E32-TC200F and E32-TC200F4 with E3X-A11 amplifier
Parallel operating range Y (mm)

E3X-VGj E3X-Aj

E3X-Fj

Sensing distance X (mm)

Through-beam, Side Beam Type

E32-T14 with E3X-A11 amplifier E32-T14 with E3X-NH amplifier
Parallel operating range Y (mm)

E32-T14
Parallel operating range Y (mm)

Sensing distance X (mm)

Sensing distance (mm)

E32-T14L with E3X-A11, E3X-F, and E3X-VG amplifiers E32-T14L with E3X-H11 amplifier
Parallel operating range Y (mm)
Parallel operating range Y (mm)

E3X-VGj E3X-Aj

E3X-Fj

Sensing distance X (mm) Sensing distance X (mm)

78
E32 E32

J OPERATING RANGE (CONT.)

Through-beam, Side Beam Type
E32-T14L with E3X-NH amplifier E32-T16 with E3X-A11 amplifier E32-T16 with E3XA-CC4A amplifier
and 0.5 mm slit
Parallel operating range Y (mm)

Parallel operating range Y (mm)

4 mA

12 mA

Sensing distance X (mm)

Sensing distance (cm)

Sensing distance (mm)

E32-T16 with E3XA-CC4A amplifier E32-T24 with E3X-A11 amplifier E32-T24 with E3X-NH amplifier
and 1 mm slit

Parallel operating range Y (mm)

4 mA
Parallel operating range Y (mm)

12 mA

Sensing distance X (mm) Sensing distance X (mm)

Sensing distance (mm)

Through-beam, High Temperature Type

E32-T51 with E3X-A and E3X-F amplifiers E32-T51 with E3X-NH amplifier
Parallel operating range Y (mm)
Parallel operating range Y (mm)

Sensing distance X (mm)

79
E32 E32

J OPERATING RANGE (CONT.)

Through-beam, High Temperature Type

E32-T51 with E3JU-XR amplifier E32-T61 with E3X-H11 amplifier E32-T61 with E3X-NH amplifier
100
Parallel operating range Y (mm)

Parallel operating range Y (mm)

Parallel operating range Y (mm)
50

-50

-100
0 200 400 600
Sensing distance (mm) Sensing distance X (mm) Sensing distance X (mm)

Through-beam, Special Purpose Type

E32-M21 with E3X-A11 amplifier E32-M21 with E3X-NH amplifier E32-T12F with E3X-NH amplifier

Parallel operating range Y (cm)

Parallel operating range Y (mm)
Parallel operating range Y (mm)

Sensing distance X (mm) Sensing distance X (mm)

Sensing distance (mm)
E32-T12F with E3X-H11 amplifier
E32-T12F with E3X-A, E3X-F, and E3X-VG amplifiers
Parallel operating range Y (mm)
Parallel operating range Y (mm)

Sensing distance X (cm)

Sensing distance X (mm)

E32-T22S with E3X-NH amplifier E32-T24S with E3X-NH amplifier E32-T84S with E3X-NH amplifier
Parallel operating range Y (mm)
Parallel operating range Y (mm)

Parallel operating range Y (mm)

Sensing distance X (mm) Sensing distance X (mm) Sensing distance X (mm)

80
E32 E32

J OPERATING RANGE (CONT.)

Diffuse, General Purpose Type
E32-CC200 with E3X-A and E3X-F amplifiers E32-CC200 with E3X-NH amplifier
Parallel operating range Y (mm)

Parallel operating range Y (mm)

E3X-Aj
E3X-VGj

E3X-Fj

Target

Sensing distance X (mm) Sensing distance X (mm)

E32-CC200 with E3MC-Y amplifier E32-D11 with E3X-NH amplifier E32-D11 with E3JU-XR amplifier
Sensing target: Blue/Green 30

Parallel operating range Y (mm)

38 x 38 mm
Parallel operating range Y (mm)

-10

-20

Target
-30
Sensing distance X (mm) 0 25 50 75 100
Sensing distance (mm)

Sensing distance X (mm)

E32-D11L with E3X-A, E3X-F, and E3X-VG amplifiers E32-D11L with E3X-H11 amplifier
Parallel operating range Y (mm)

Parallel operating range Y (mm)

E3X-VGj
E3X-Aj

E3X-Fj

Sensing object Sensing object

Sensing distance X (mm) Sensing distance X (mm)

E32-D11L with E3X-NH amplifier E32-D11L with E3X-NVG amplifier

Parallel operating range Y (mm)
Parallel operating range Y (mm)

Detectable
object

E3X-NVG
Target

Sensing distance X (mm)

81
E32 E32

J OPERATING RANGE (CONT.)

Diffuse, General Purpose Type

E32-D11L with E3MC-Y amplifier E32-D11R with E3X-NH amplifier E32-D21 with E3X-A, E3X-F and
Sensing target: Blue/Green 38 x 38 mm E3X-VG amplifiers

Parallel operating range Y (mm)

E3X-VGj
E3X-Fj E3X-Aj

Sensing distance X (mm) Sensing object

Sensing distance X (mm)

E32-D21 with E3X-NH amplifier E32-D21 with E3JU-XR amplifier E32-D21L with E3X-A and E3X-F amplifiers
3
Parallel operating range Y (mm)

Parallel operating range Y (mm)

1 E3X-Fj E3X-Aj

-1

-2

Target -3 Sensing object

0 5 10 15
Sensing distance X (mm) Sensing distance (mm) Sensing distance X (mm)

E32-D21L with E3X-NH amplifier E32-D21R with E3X-DAN amplifier

E32-D21L with E3X-H11 amplifier
Parallel operating range Y (mm)

Parallel operating range Y (mm)

Target
Sensing object
Sensing distance X (mm)
Sensing distance X (mm) Sensing distance X (mm)

E32-D22L with E3X-A and E3X-F amplifiers E32-D32 with E3X-A11 amplifier
Parallel operating range Y (mm)

8
Parallel operating range Y (mm)

4
E3X-Fj E3X-Aj
2

0 10 20 30 40 50 60 70
2

4
6
8
Sensing object Sensing distance X (mm)
Sensing distance X (mm)

82
E32 E32

J OPERATING RANGE (CONT.)

Diffuse, General Purpose Type

E32-D32 with E3X-NH amplifier E32-D32 with E3JU-XR amplifier E32-D32L with E3X-A, E3X-F, and
9 E3X-VG amplifiers

Parallel operating range Y (mm)

E3X-VGj Amplifier
3
E3X-Fj E3X-Aj Amplifier
Amplifier
0

-3

-6
Target
-9
Sensing distance X (mm) 0 10 20 30
Sensing distance (mm) Sensing distance X (mm)

E32-D32L with E3X-NH amplifier E32-D32L with E3MC-Y amplifier E32-DC50 with E3X-A, E3X-F, and
E3X-VG amplifiers
Parallel operating range Y (mm)

Sensing target: Blue/Green 38 x 38 mm

Parallel operating range Y (mm)

E3X-Aj
E3X-VGj

E3X-Fj

Target

Sensing distance X (mm)

E32-DC200 with E3X-A, E3X-F, and E3X-VG amplifier E32-DC200 with E3X-H11 amplifier
Parallel operating range Y (mm)

Parallel operating range Y (mm)

E3X-Aj
E3X-VGj

E3X-Fj

Sensing object

Sensing distance X (mm)

E32-DC200 with E3X-DAN amplifier E32-DC200 with E3X-NH amplifier E32-DC200 with E3JU-XR amplifier
Parallel operating range Y (mm)

Parallel operating range Y (mm)

30
Parallel operating range Y (mm)

20
Long
distance
10
High speed
0

-10
Standard
-20

Target
-30
Sensing distance X (mm) Sensing distance X (mm) 0 40 80 120
Sensing distance (mm)

83
E32 E32

J OPERATING RANGE (CONT.)

Diffuse, General Purpose Type

E32-DC200 with E3X-NM and E3X-NT amplifiers E32-DC200 with E3X-NV amplifier

Parallel operating range Y (mm)

E3X-NV

Sensing distance X (mm)

Sensing distance X (mm)
E32-DC200 with E3MC-Y amplifier E32-DC200C with E3X-A11 amplifier
Sensing target: Blue/Green 38 x 38 mm

Parallel operating range Y [mm (inch)]

3.0 Parallel offset Y
Parallel operating range Y (mm)

(0.118)

2.0
(0.079)

1.0 Detecting distance X

(0.039)

1.0
(0.039) Detectable
object
2.0
(0.079)

3.0
(0.118)
8 16 24
Sensing distance X (mm) (0.316) (0.630) (0.945)
Detecting distance X [mm (inch)] with 5 x 5 cm
(2 x 2 in) 90% reflective mat paper

E32-DC200E with E3X-A11 amplifier

Parallel operating range Y (mm)

E3X-Aj

Sensing object

Sensing distance X (mm)

Diffuse, Armored Type
E32-UDAT1-3F with E3JU-XR amplifier E32-UDAT1-6F with E3JU-XR amplifier
20 20
Parallel operating range Y (mm)
Parallel operating range Y (mm)

10 10

0 0

-10 -10

-20 -20
0 50 100 150 0 50 100 150
Sensing distance (mm) Sensing distance (mm)

84
E32 E32

J OPERATING RANGE (CONT.)

Diffuse, Armored Type

E32-UDAT1-3F and E32-UDAT1-6F with E3X-A11 amplifier

20
Parallel operating range Y (mm)

15
E32-UDAT1-3F
10

0 120
30 60 90
5 E32-UDAT1-6F

20
Sensing distance X (mm)
E32-UDBT1-3F with E3JU-X amplifier E32-UDBT1-6F with E3JU-X amplifier

Parallel operating range Y (mm)

12 12
Parallel operating range Y (mm)

8 8

4 4

0 0

-4
-4
-8
-8

-12
-12
0 50 100 150 0 25 50 75 100 125

Sensing distance X (mm) Sensing distance (mm)

Diffuse, Probe Type

E32-D33 with E3X-A11 amplifier E32-D33 with E3X-DAN amplifier E32-D33 with E3X-NH amplifier
Parallel operating range Y (mm)
Parallel operating range Y (mm)

Parallel operating range Y (mm)

Standard
High speed

E3X-Aj

Long distance
Target

Sensing distance X (mm) Sensing distance X (mm)

Sensing distance X (mm)
E32-DC200B and E32-DC200B4 E32-DC200F with E3X-NH amplifier E32-DC200F and E32-DC200F4 with
with E3X-A and E3X-F amplifiers E3X-A11 amplifier
Parallel operating range Y (mm)
Parallel operating range Y (mm)

Parallel operating range Y (mm)

E3X-Aj
E3X-Aj

E3X-Fj

Target Sensing object

Sensing object

Sensing distance X (mm) Sensing distance X (mm) Sensing distance X (mm)

85
E32 E32

J OPERATING RANGE (CONT.)

Diffuse, Side Beam Type

E32-D14L with E3X-A, E3X-F and E3X-VG amplifiers E32-D24 with E3X-A and E3X-F amplifiers
Parallel operating range Y (mm)

Parallel operating range Y (mm)

X
E3X-Aj Y

E3X-Fj E3X-Aj
E3X-Fj
E3X-VGj

Sensing distance X (mm) Sensing distance X (mm)

Diffuse, High Temperature Type

E32-D51 with E3X-A and E3X-F amplifiers E32-D51 with E3X-NH amplifier E32-D51 with E3JU-XR amplifier
Parallel operating range Y (mm)

30
Parallel operating range Y (mm)

Parallel operating range Y (mm)

E3X-Fj
E3X-Aj 20

-10

-20
Target -30
Sensing object
Sensing distance X (mm) 0 50 100 150
Sensing distance X (mm) Sensing distance (mm)

E32-D61 with E3X-A and E3X-F amplifiers E32-D73 with E3X-A and E3X-F amplifiers
Parallel operating range Y (mm)

Parallel operating range Y (mm)

E3X-Fj E3X-Aj
E3X-Fj E3X-Aj

Sensing
object Sensing object
Sensing distance X (mm) Sensing distance X (mm)

86
E32 E32

J OPERATING RANGE (CONT.)

Diffuse, Convergent and Special Purpose Types

E32-D12F with E3X-A, E3X-F and E3X-VG amplifiers E32-L25 and E32-L25A with E3X-A11 amplifier
16
E3X-Aj
Parallel operating range Y (mm)

Parallel operating range Y (mm)

X
12
Y
E3X-VGj
8
E3X-Fj
4

0
20 40 60 80 100
4

16
Sensing distance X (mm) Sensing distance (mm)

E32-L25L with E3X-A amplifier E32-L25L with E3X-DAN amplifier E32-L25L with E3X-NH amplifier
Parallel operating range Y (mm)

Parallel operating range Y (mm)

Operating
Operating position Y Target
position Y Sensing object
Target Set distance X
Sensing object Set distance X

Set distance X
Set distance X

Sensing distance X (mm) Sensing distance X (mm)

Sensing distance X (mm)
Retroreflective Type
E32-R21 with E3X-A11 amplifiers E32-R21 with E3XA-CC4A amplifier and E39-R3 reflector
Light interrupting Output current (mA) Light interrupting
Output current (mA) characteristics
characteristics
Parallel operating range Y (mm)

D = 20 cm D = 20 cm
Sensing objectposition Sensing objectposition
10 At 5 cm away from 10 At 5 cm away from
Analog output (mA)
Analog output (mA)

reflector reflector
At center At center between
between sensor sensor and reflector
and reflector At 5 cm away
At 5 cm away from sensor
from sensor
5 5
Fiber D Fiber D
head head

Reflector Reflector
Sensing object Sensing object
Sensing distance (mm)
Moving distance of sensing object ℓ (mm) Moving distance of sensing object ℓ (mm)

87
E32 E32

J ANALOG OUTPUT VS. DISTANCE (STANDARD MODE)

E32-TC200 with E3X-DAN E32-DC200 with E3X-DAN
amplifier (Through-beam) amplifier (Diffuse)

Analog output (V)

Distance (mm) Distance (mm)

J ADDITIONAL DATA
With standard sensing object. With standard target at maximum sensitivity.

Sensing Distance vs. Differential Travel vs. Repeat Accuracy vs.

Operating Range Sensing Distance Sensing Distance
E32-DC200 with E3X-DAN E32-D11L with E3X-DAN E32-DC200 with E3X-DAN
amplifier (Reflective) amplifier (Reflective) amplifier (Reflective)
Differential travel (mm)
Distance Y (mm)

Sensing object: White paper (µm) Sensing object: White paper

Distance Differential travel

Repeat accuracy
0.1-dia.
copper High
0.02-dia. speed
wire
copper
wire Standard
Standard

High Long
speed distance
Long
0.4-dia. distance
copper wire
Distance X (mm)
Distance (mm) Distance (mm)

88
E32 E32

Dimensions
Unit: mm (inch)

J THROUGH-BEAM TYPE
(Sold in pairs)

General Purpose
E32-T11
Sensing head
(nickel-plated
Sixteen, brass) Two hexagon clamping nuts
0.265 M4 x 0.7
(0.01) dia. Two toothed washers
Protective tube Optical fiber, 2.2 (0.086) dia.
M2.6 x
0.45

2.4
3.2 3.3 15
7 14 2 m (6.56 ft.)
(0.28) (0.55)

E32-T11L

Two hexagon clamping nuts (T = 2.4)

1.4 Two toothed washers (for M4)
M2.6 x
(0.06) dia. 0.45 Sensing head Optical fiber, 2.2 (0.086) dia.
(nickel-plated brass) M4x0.7

3 11
3.2 (0.12)
7 14 2 m (6.56 ft.)
(0.28) (0.55)

E32-T11R
Two, hexagon nuts
Two, toothed washers
151-0.075 dia. 4mm sensing head (See Note.) 2.2-dia. optical fiber

Note: The sensing head is made of nickel-plated brass.

E32-T12L
1.4 2.4 dia.
dia. (0.09) Sensing head
(nickel-plated brass) 3 dia. Optical fiber, 2.2 (0.086) dia.

3 11
14 2 m (6.56 ft.)
(0.55)

E32-T17L

Sensing head
(ABS) M14 x 1 Two hexagon clamping nuts
10-mm dia. Optical fiber,
lens (PMMA) 2.2 (0.086) dia.

19 5
(0.75) 23
42
10 m (32.8 ft.)

89
E32 E32

J THROUGH-BEAM TYPE (CONT.)

E32-T21

Sensing head (nickel-plated brass) M3 x 0.5 Fiber attachment

Two hexagon clamping nuts (E39-F9)
Four, 0.25 25 (0.99)
(0.01) dia. Two toothed washers
Protective tube 10
Optical fiber, 1 dia.

2.5 1.8 15
11 2 m (6.56 ft.)
5.5 (0.43)
(0.22)

E32-T21L
Two hexagon clamping nuts
Fiber attachment
Two toothed washers (E39-F9)
Sensing head M3 x 0.5
0.9 25 (0.99)
(nickel-plated brass)
(0.04) dia.
Optical fiber, 1 dia. 10

1.7
2.5 (0.07) 1.8
11 2 m (6.56 ft.)
5.5 (0.04)
(0.22)

E32-T21R
Two, hexagon nuts
Two, toothed washers
151-0.037 dia. 3mm sensing head (See Note.)
2.2-dia. optical fiber
3 dia.

Note: The sensing head is made of nickel-plated brass.

E32-T22
Heat-shrinkabletubing Fiber attachment
(E39-F9)
Sensing head Optical fiber, 25 (0.99)
0.5 dia. 1.4 dia.
SUS303 1 dia. 10

17 12
2 22 (0.86) 2 m (6.56 ft.)
(0.08) dia.

E32-T22L
Fiber attachment
Sensing head, 2 dia. (stainless) (E39-F9)
Heat-shrinkable tubing 25 (0.99)
1.8
0.9 dia. (0.07) dia. Optical fiber, 1.0 dia. 10

2
(0.07)
17 12
22 2 m (6.56 ft.)
(0.86)

90
E32 E32

J THROUGH-BEAM TYPE (CONT.)

E32-TC50, E32-TC200, E32-TC500,

E32-TC1000

Two hexagon clamping nuts

1.0
(0.04) dia. Two toothed washers
M2.6 x 0.45 Sensing head M4 x 0.7
(nickel-plated brass)

3 2.4 Optical fiber, 2.2 dia.

3.2
14 * 2 m (6.56 ft.)
7 (0.55)
(0.28)

* This length is 50 cm for E32-TC50, 5 m for E32-TC500 and 10 m for E32-TC10000.

E32-TC200A

1.0 Two hexagon clamping nuts

(0.04) dia. Two toothed washers
2.6 dia. Sensing head M3 x 0.5 (nickel-plated brass)

3 dia.
1.8 Optical fiber, 2.2 dia.
5.5 7
(0.22) 1.5 2 m (6.56 ft.)
(0.28) 14
(0.55)

E32-TC200C
Two hexagon clamping nuts
75 (3.0)
1.0 Two toothed washers
(0.04) dia. Sensing head
M2.6 x 0.45 M4x0.7 (nickel-
plated brass) 22
(0.87) dia.
Optical fiber,
7 2.4 2.2 dia.
(0.28)
3 11 90 2 m (6.56 ft.) 400
(0.12) (0.43) (3.54) when straight (15.8)

E32-TC200E
Two hexagon clamping nuts
Two toothed washers Fiber attachment
(E39-F9)
0.5 Sensing head M3 x 0.5 25 (0.99)
(0.02) dia. (nickel-plated brass)
Optical fiber, 1 dia. 10

2.5 1.8
(0.10) 11 2 m (6.56 ft.)
5.5 (0.43)
(0.22)

Armored Type
E32-UTAT1-3F
E32-UTAT1-6F
Ø8.0 (0.315)
(5/16 - 24) thread 5.1 (0.2) Ø5.0 (0.197)
(303 stainless steel) (304 stainless steel) (ABS) (303 stainless
12.7 (0.5) steel) Ø2.2 (0.087)

4.0 (0.157)
4.0 (0.157)
38.1 (1.5) 5.0 (0.197)
Ø1.27 (0.05) 50.8 (2) 17.0 (0.669) 15.0 (0.59)
(Fiber Bundle)
A B
L

Note: 1. Distance A can withstand 150°C (302°F); Distance B can withstand 70°C (158°F);
2. L = 3ft. for E32-UTAT1-3F; 6ft. for E32-UTAT1-6F

91
E32 E32

J THROUGH-BEAM TYPE (CONT.)

E32-UTBT1-3F
E32-UTBT1-6F Ø7.1 (0.281)
(5/16 - 24) thread 5.9 (0.234) (304 stainless steel)
(303 stainless steel) (303 stainless steel) Ø4.7 (0.187)
12.7 (0.5)

12.7 (0.5)
15.2 (0.6)
Ø3.2 (0.125) 0.9 (0.035)
(Fiber Bundle) 38.1 (1.5) 25.4 (1.0)
A B
L

Note: 1. Distance A can withstand 200°C (392°F); Distance B can withstand 70°C (158°F);
2. L = 3ft. for E32-UTAT1-3F; 6ft. for E32-UTAT1-6F

Probe Type
E32-T33-1

Fiber attachment
(E39-F9)
Sensing head 25
(SUS303) Heat-shrinkable Optical fiber, (0.98)
Two, 0.25 0.8 3 (0.12) dia. tubing two, 1 (0.04) dia.
(0.01) dia. (0.03) dia. 10

15 15 12
35 (1.38)
2 m (6.56 ft.)

E32-TC200B
E32-TC200B4

Two hexagon clamping nuts

1.0
(0.04) dia. Two toothed washers
Stainless tube
Sensing head M4 x 0.7 (nickel-plated brass)
1.2 dia. (SUS304)
max.

3.2 2.4 Optical fiber, 2.2 (0.086) dia.

90 (3.5) 11 2 m (6.56 ft.)
7 [40 (1.57)]
(0.28) (see note)

Note: The values in the brackets are for the E32-TC200B4.

E32-TC200D
E32-TC200D4
Two hexagon clamping nuts

Two toothed washers 75

Stainless
1.0 dia. 1.2 tube Sensing head M4 x
dia. (SUS304) 0.7 (nickel-plated
max. brass) 22
(0.87) dia.

2.4 Optical fiber,

3.2 2.2 dia.
7 11 90 2m (6.56ft.) 400
90 (3.5) (3.53) (15.8)
when straight
[40 (1.57)]
See note

Note: The values in the brackets are for the E32-TC200D4.

92
E32 E32

J THROUGH-BEAM TYPE (CONT.)

E32-TC200F
E32-TC200F4 Two hexagon clamping nuts
Fiber attachment
Stainless tube Two toothed washers (E39-F9)
0.5 (SUS304)
(0.02) dia. Sensing head M3 x 0.5 25 (0.99)
0.9 dia. (nickel-plated brass) 10
min. Optical fiber, 1 dia.

2.5 1.8
(0.10)
90 11 2 m (6.56 ft.)
5.5 (3.5) (0.43)
(0.22) [40 (1.57)]
(See note)

Note: The values in the brackets are for the E32-TC200F4.

Side Sensing Type

E32-T14
Heat resistive ABS
Lens unit
(PMMA) 8.2
4.4 dia.
7
(0.28)

Optical axis Optical fiber,

R3.5 Two, 3.2 dia. 2.2 (0.086) dia.

7 8
10.5

10¦0.2
2.5
9.2 16 11.2 2m
(0.63) (6.56 ft.)

E32-T14L
Sensing head, 3 dia.
(stainless) Heat-shrinking tubing
Optical fiber, 2.2 (0.086) dia.
45°
2.8

1.5
3 (0.12) dia. 1 1.5
30 (1.18) 12
35 (1.38) 2 m (6.56 ft.)

Sensing surface

93
E32 E32

J THROUGH-BEAM TYPE (CONT.)

Side Sensing Type
E32-T16

20 (0.79) Two, R2
10.2 4 3.2 0.5-mm (0.02) Wide Slit Seal
(Sold in Pairs)
6
Mounting Holes (0.23)
4 2
(0.79) 0.5
20
4
Sensing Two, (R) Two, (R)
15.5 head 1.2 11
(0.61) 4.5 (0.43) 15
(ABS)
Two, M3 23
8.4 2.3 (0.90)
8.85 3
5.5
3.2 Black

27 25 20 1-mm (0.04) Wide Slit Seal

(1.06) (Sold in Pairs)
6
Lens 1
(2 x 10) 58
6 dia.
43.2 4
Two,
2m 3.2 (0.16) dia. 23
(6.56 ft.) (0.90)
Mounting bracket 15
E39-L4
Black

Fiber 33 (1.30)
2.2 (0.08) dia.

E32-T16P E32-T16P + E39-L94 Mounting

Two, 3.2 dia.,
6 dia counter 0.5-mm (0.02) wide Seal Slit
sinking 14.5 4 (Two slits are provided)
(0.57) (0.15)
3.4
(0.13) 35
10.7 (1.38)
20
0.5 (0.02) 2 (0.79)
4 4.8

19 13.4 Two, M3
(0.75) 27
(1.06) 20 4 20
(0.79) Sensing 26.4 (0.79)
head (1.04)
(2 x 11)
4 (PMMA)
Black
12.2
(0.48) 3.2
Sensing head (0.13)
(heat-resistive ABS)

1-mm (0.04) wide Seal Slit

(Two slits are provided) Sensing
head 19
3.4 (0.75)
2m (0.13)
(6.56 ft.)
52
1 (2.04)
4
2.2 (0.09) dia.
optical fiber 43.2
(1.7)
13.4

26.4 23.2
(1.04) E39-L94 Mounting Bracket (0.91)
2.2-dia. (sold separately)
fiber

Black

94
E32 E32

J THROUGH-BEAM TYPE (CONT.)

Side Sensing Type
E32-T24

Sensing head 1 (0.04) dia. Fiber attachment

(E39-F9)
SUS304 2 (0.07) dia.
25 (0.99)
Protective tube
1.4 dia. 10
Optical fiber, 1 dia. (0.39)
45°

1
0.5 1.5
15 15 (0.59) 12
35 (1.38) 2 m (6.56 ft.)

High Temperature Type

E32-T51

Two hexagon clamping nuts

1.5
(0.06) dia. Two toothed washers
Sensing head M4 x 0.7 (nickel-plated brass)

2.85 dia.
7 2.4 Optical fiber, 2.2 dia.
(0.28) 1 15
17 2 m (6.56 ft.)
(0.67)

Note: Resistant temperature is 150°C (302°F). Resistant temperature is 130°C (266°F) when used
continuously.

E32-T61

Two hexagon clamping nuts

1.0 Two toothed washers SUS flexible tube Hexagon clamping screw
(0.04) dia. Sensing head M4 x 0.7
M2.6 x 0.45 2.8 dia. 4 dia. 5 dia. Sleeve
(SUS303)

(See note)
4 dia.
7 3 2.4 13 (0.51)
5
(0.28) 20 (0.79) 10 2 m (6.56 ft.) 28 (1.10)
A B

Note: Section A resists 300°C and section B (which is inserted to the amplifier) resists 110°C.
The operating temperature of section B must also be within the withstand temperature
range of the amplifier.

Special Purpose
E32-G14
Sensing head (ABS)
36.3 (1.43) 22
25.2 (0.99) (6.56 ft.)
20 (0.79)
9.2
R1.6 R1.6
Mounting Holes
Two, M3
Lens R3.5
(PMMA) 24 10 Optical axis 3.2 9.0 (0.35)
(0.95)
9.4
(0.37)

4 1.6 1.6 Optical fiber

9.4 2.2 (0.86) dia.
23.5 (0.92)
(0.37)

7.4 7.0
(0.29)

95
E32 E32

J THROUGH-BEAM TYPE (CONT.)

Special Purpose
E32-M21
Two hexagon clamping nuts
Sensing head Two toothed washers
M3 x 0.35 Plastic fibers, four, 1 (0.04) dia.
(SUS303) Silicone tube

Sleeve

13
28 (1.10)

1.8
11 2 m (6.56 ft.)
23 (0.90)

Note: One set of silicone tubes is black while the other set is gray for easy identification
when they are connected to the light source and receiver.

E32-T12F

4-mm
(0.16)
dia. lens Sensing head, 5 dia. Optical fiber,
Fluoride resin 4 dia. 2.2 (0.086) dia.

20
2 m (6.56 ft.) 100
(3.93)

E32-T22S

Sensing head
1.7 dia. (nickel-plated brass) Optical fiber,
2.2 (0.086) dia.
3
(0.12)
dia.
15 2 m (6.56 ft.)
(0.59)

E32-T24S

0.4 (0.02) 1.8 (0.07)

Sensing head
3.5 dia. (nickel-plated brass) Optical fiber,
2.2 (0.086) dia.
17.6 11
(0.69) (0.43) 3.2

Mounting bracket (attachment)

3 3.2
10
20.5 (0.81) 2 m (6.56 ft.)

2 (0.08) dia.

Sensing surface
2
(0.08)

96
E32 E32

J THROUGH-BEAM TYPE (CONT.)

Special Purpose
E32-T84S

A B
20
14.2 12 2.000 (0.79) 13
(0.56) (0.47) (78.74) 15 (0.51)
(0.59)

φ3 2.2 mm dia.
R8 φ4 2.9 mm φ4 φ5
(0.12) SUS 304
90°

φ 3.5
(0.14)

φ 3

J DIFFUSE TYPE
General Purpose
E32-CC200

Sixteen, 0.25
(0.01) dia. for 1.0 dia. for light Two hexagon clamping nuts
lightreception emission Two toothed washers Optical fiber,
2.5 dia. Sensing head M6 x 0.75 two, 2.2 dia.
(nickel-plated brass)

3
5.2 2.4
23 2 m (6.56 ft.)
10 (0.90)

E32-D11

Sixteen, Sensing head Two hexagon clamping nuts

0.265 (SUS303)
dia.(0.01) Two toothed washers (10 teeth) Optical fiber, two,
M6 X 0.75
Protective tube 2.2 dia.

5.2 2.4 15
10 17 2 m (6.56 ft.)
(0.39) (0.67)

E32-D11L
Two hexagon clamping nuts
Two toothed washers
Two, 1.4 dia. Sensing head (nickel-plated brass) M6 x 0.75
4 dia.
Two optical fiber,2.2 dia.

5.2 2.4
3
10 20 2 m (6.56 ft.)
(0.39) (0.79)

97
E32 E32

J DIFFUSE TYPE (CONT.)

General Purpose
E32-D11R
Two, hexagon nuts
Two, toothed washers
2-151-0.075 dia. 4 dia. 6mm sensing head 2.2-dia. optical fiber

Note: The material is ADC (aluminum die-cast)

E32-D21
Sensing head Fiber attachment
(nickel-plated (E39-F9)
brass) M3 x 0.5 25 (0.98)
Two hexagon clamping nuts
Four, 0.25 Two toothed washers 10
(0.01) dia. Optical fiber, two, 1 dia. (0.39)
Protective tube

2.5 1.8 15
11 2 m (6.56 ft.)
5.5 (0.43)

E32-D21L
Two fiber
attachments
(E39-F9)
Two hexagon clamping nuts
Two toothed washers 25 (0.98)
Two, 0.9
(0.04) dia. Sensing head M4 x 0.75 10
(nickel-plated brass) Optical fiber, (0.39)
two, 1.0 dia.

3.2 3 2.4
7 15 2 m (6.56 ft.)
(0.28) (0.59)

E32-D21R
Two, hexagon nuts Two, E39-F9 Fiber Attachments
Two, toothed washers
3mm sensing 1mm optical fiber
2-151 x 0.037 dia.
head (See Note.)

Note: The sensing head is made of nickel-plated brass.

E32-D22L
Two fiber
attachments
(E39-F9)
25 (0.98)
10
Two,
2.7 dia. Sensing head 3 dia. Optical fiber, two, 1 dia. (0.39)
0.9 dia. (nickel-plated brass)

3
15 2 m (6.56 ft.)
(0.59)

98
E32 E32

J DIFFUSE TYPE (CONT.)

General Purpose
E32-D32
Two fiber
attachments
(E39-F9)
25 (0.98)
Sensing
Light source 10
head 2 (0.08)
fiber 0.5 dia. Heat-shrinkable Optical fibers, (0.39)
SUS303 dia. 3 (0.12) tubing two, 1 (0.04) dia.
dia.

15 (0.59) 2 12
Receive fiber
(0.25 dia.) x 4 22 (0.87) 2 m (6.56 ft.)

E32-D32L

2 m (6.56 ft.) standard length

Light source 15 (0.59)
400 (15.75) 15 (0.59) 1,570 (61.81)
(1 dia.)

Receive
(0.265 dia.) x 16 Sensing head,
3 dia (0.12). Optical
Branching box, fibers, two,
(stainless) 6 dia. (heat-resistive 2.2 (0.09) dia.
ABS black resin)

E32-DC50, E32-DC200,
E32-DC500, E32-DC1000

Two, Two hexagon clamping nuts Part number L

1.0 dia. 4 Two toothed washers E32-DC50 50 cm (19 in)
(0.16) dia. Sensing head M6 x 0.75 (ADC) E32-DC200 2 m (6.56 ft.)
E32-DC500 5 m (16.3 ft.)
Optical fiber,2.2 dia. E32-DC1000 10 m (32.8 ft.)

4.8 3
2.4
10 17
(0.67) L
(0.39)

E32-DC200C

150
Two hexagon clamping nuts (5.90)
Two, 1.0 dia. Two toothed washers
Sensing head (nickel-plated
brass) M6 x 0.75
22 dia.
(0.87)

Optical fiber, 2.2

5.2 2.4 x 2 dia.
10 17 (0.67) 90 (3.54) 2 m (6.56 ft.) 400 (15.8)
(0.39) when straight

E32-DC200E Two fiber

attachments
(E39-F9)
Two hexagon clamping nuts
Two toothed washers 25 (0.98)
Sensing head M3 x 0.5 (SUS304) 10
Two, 0.5 dia. (0.39)
Optical fiber, two, 1 dia.

2.5 1.8
(0.10)
11 2 m (6.56 ft.)
5.5 (0.43)
(0.22)

99
E32 E32

J DIFFUSE TYPE (CONT.)

Armored Type
E32-UDAT1-3F
E32-UDAT1-6F
(ABS) (303 stainless steel)

(5/16 - 24) thread 5.1 (0.2) Ø8.0 (0.315)

(Epoxy-filled PVC)
12.7 (0.5) (303 stainless steel) (304 stainless steel) Ø5.0 (0.197)
Ø2.2 (0.087)

4.0 (0.157)
Ø1.7 (0.066) 4.0 (0.157)
(Fiber Bundle) 5.0 (0.197)
38.1 (1.5) 38.1 (1.5) 17.0 (0.669) 15.0 (0.59)

50.8 (2.0) 190.5 (7.5)

A B
L

Note: 1. Distance A can withstand 150°C (302°F); Distance B can withstand 70°C (158°F); L= 3ft. or 6ft.
2. L = 3ft. for E32-UDAT1-3F; 6ft. for E32-UDAT1-6F

E32--UDBT1--3F
E32--UDBT1--6F
(5/16 - 24) thread 5.9 (0.234) (PVC) (303 stainless Ø7.1 (0.281)
12.7 (0.5) (303 stainless steel) (304 stainless steel)
steel) Ø4.7 (0.187)

12.7 (0.5)
Ø3.2 (0.125) 15.2 (0.6)
(Fiber Bundle) 0.9 (0.035)
25.4 (1.0)
38.1 (1.5) 38.1 (1.5) 152.4 (6.0)
A B
L

Note: 1. Distance A can withstand 200°C (392°F); Distance B can withstand 70°C (158°F)
2. L = 3ft. for E32-UDBT1-3F; 6ft. for E32-UDBT1-6F

Probe Type
E32-D33
Fiber attachment
(E39-F9)
25
0.8 Sensing head (0.98)
Two, 0.25 (SUS303) 3 (0.12) Heat-shrinkable Optical fiber, two, 10
(0.03) 1 (0.04) dia.
(0.01) dia. dia. tubing (0.39)
dia.

15 (0.59) 15 (0.59) 12 (0.47)

35 (1.38) 2 m (6.56 ft.)

E32-DC200B
E32-DC200B4

Two hexagon clamping nuts

Two, 1.0 dia. Stainless Two toothed washers
tube Sensing head M6 x 0.75 (fine screw)
2.5 dia. (SUS304)
max.

5.2 2.4 Optical fiber,2.2 dia.

10 17 2 m (6.56 ft.)
90 (3.54) (0.67)
(0.39)
[40 (1.57)]
See note

Note: The values in the brackets are for the E32-DC200B4.

100
E32 E32

J DIFFUSE TYPE (CONT.)

Probe Type
E32-DC200D
E32-DC200D4
Two hexagon clamping nuts 150 (5.90)
Two, 1.0 Stainless Two toothed washers
(0.04) dia. tube Sensing head M6
2.5 dia. (SUS304) x 0.75 (SUS304)
max.
22 dia.
(0.87)
Optical fiber,
5.2 2.4 two, 2.2 dia.
17 400
10 90 2 m (6.56 ft.) (15.8)
(0.39) 90 (3.54) (0.67) (3.54) when straight
[40 (1.57)]
See note

Note: The values in the brackets are for the E32-DC200D4.

E32-DC200F
E32-DC200F4
Fiber
attachment
Two hexagon clamping nuts (E39-F9)
Two toothed washers 25 (0.98)
Sensing head M3 x 0.5
Two, 0.5 Stainless tube (SUS304) 10
(0.02) dia. (SUS304) (0.39)
Optical fiber, two, 1 dia.
1.2 dia. min.

2.5 1.8
11 2 m (6.56 ft.)
5.5 90 (3.5) (0.43)
(0.22) [40 (1.57)]
See note.

Note: The values in the brackets are for the E32-TC200F4.

E32-DC9G
E32-DC9G4
Sleeve
1.2 (0.05) 4 (0.16)
dia. max. Stainless tube

8 15 (0.59)

Do not bend the stainless

tube in this range.
10 7.5 6
(0.39) 13 (0.24)
90 (3.54) 17 (0.51)
[40 (1.57)] (0.67)
See note

Note: The values in the brackets are for the E32-DC9G4.

Side Sensing Type

E32-D14L
Optical fiber,
two, 2.2
Sensing head (0.09) dia.
(stainless) Heat-shrinkable tubing
45°
5.7

1.5
6 (0.24) 1 2
dia. 30 (1.18) 12 (0.47)
35 (1.38) 2 m (6.56 ft.)
Light baffle

Sensing surface

101
E32 E32

J DIFFUSE TYPE (CONT.)

Side Sensing Type
E32-D24 Two fiber
attachments
(E39-F9)
Sensing
head 25 (0.98)
(SUS304) 3 (0.12) Heat-shrinkable Optical fibers, two, 10
(0.39)
2 (0.08) dia. tubing 1 (0.04) dia.
45° dia.

1
0.5 1.5
12
15 (0.59) 15 (0.59) (0.47)
35 (1.38) 2 m (6.56 ft.)

Light baffle Sensing surface

High Temperature Type

E32-D51
Two hexagon clamping nuts
Optical fiber, 2.2
Two, 1.5 dia. Two toothed washers (0.09) dia.
Sensing head,M6 x 0.75*

4.9

3.1 2.4
10 3 13 (0.51)
(0.39)
17 2 m (6.56 ft.)
(0.67)

*nickel-plated brass
Note: Resistant temperature is 150°C (302°F). Resistant temperature is 130°C (266°F) when used
continuously.

E32-D61
Two hexagon clamping nuts
Two toothed washers SUS flexible tube
1.4 Sensing head (SUS303) SUS304 Sleeve
(0.06) dia. M4 x 0.7 M3 x 0.75 Hexagon clamping screw
5 dia. 3.5 dia.

8 15 (0.59)

10 3 5 6.5 See note

3 6.4
(0.39) 2 2.4 13
20 (0.79) 5 2 m (6.56 ft.) 16.5 (0.65) (0.25)
A B

Note: Section A resists 300°C (572°F) and section B (which is inserted to the amplifier) resists 110°C (230°F).
The operating temperature of section B must also be within the withstand temperature range of the
amplifier.

102
E32 E32

J DIFFUSE TYPE (CONT.)

High Temperature Type
E32-D73
Two hexagon clamping nuts SUS303
Two toothed washers Sleeve
1.0 Sensing head Hexagon
(0.04) dia. 1.25 dia. 2.5 dia. M4 x 0.7 (SUS303) SUS flexible tube 5 dia.
clamping
1.65 dia. 4 dia. 2.8 dia. screw
8 15 (0.59)

7 See note
5 5 6.4
2.4 5 6.5
(0.25)
60 (2.36) 20 (0.79) 10 2 m (6.56 ft.) 16.5 (0.65) 13 (0.51)
A B C

Note: Section A resists 400°C (752°F), section B resists 300°C (572°F) and section C (which is inserted to the amplifier)
resists 110°C (230°F). The operating temperature of section C mustalso be within the withstand temperature range
of the amplifier.

Convergent Type and Special Purpose

E32-D12F
Sensing head, Optical fiber, two,
6 (0.24) dia. Fluoride resin 5 (0.20) dia. 2.2 (0.09) dia.

16
2 m (6.56 ft.) 100
(3.94)

E32-L24L

4 (0.16)

3.6 (0.14)
3.3 18 (0.71) Side view prism (PC)

1.5 Two fiber attachment

3.3 4
(E39-F9)

Optical 6 25
20 axis (0.98)
(0.79)
Two, 1 dia. optical fibers 10
6.5 (0.26)
(0.39)

Sensing head
(PC)
Two, 3.2 dia, 6 dia. 2m (6.56 ft.)
counter sinking

103
E32 E32

J DIFFUSE TYPE (CONT.)

Convergent Type

E32-L25

20 (0.79)
5
10 4
(0.39)
4.8 Note: The fiber for the light source is
6.5
identified by a white line.
20 White line Optical fiber, two, 2.2 dia.
(0.79) 6.5 (0.26)

2 m (6.56 ft.)
Two, 3.2 dia.,
Sensing head (ABS) 6 dia. spot facing

E32-L25A

20 (0.79)
5
4 10

4.8 6.5
(0.26)

20 6.5
(0.79) (0.26)

Sensing head
(ABS)

Two, 3.2 dia.,

6 dia. spot facing

2m
(6.56 ft.) White line

Optical fiber, two,

2.2 dia.

E32-L25L

18 (0.71) Two fiber attachment

4 (E39-F9)

25
6 (0.24) (0.98)
16 Two, 1 dia. optical fibers
(0.63) 10
6.5 (0.26) (0.39)

Sensing head
(PC)
Two, 3.2 dia, 6 dia. 2m (6.56 ft.)
counter sinking

104
E32 E32

J RETROREFLECTIVE TYPE
E32-R16

Nameplate
27 (1.06) 15
(0.59)

7 (0.28)
13
(0.51)

10 3.2 1.5 (0.06)

(0.39) (0.13) 1.5 3.2
16
7.2 6 4

15.2
(0.60) 8
21.5
(0.85)
21 Optical fiber,
(0.83) two, 2.2 (0.09) dia.
16±0.2 Standard length: 2 m
Lens (PMMA) Two, M3 screws
17 22.5
1 (0.67) (0.88) (attachment)

Mounting bracket
(attachment)

E32-R21
Two fiber
attachments
(E39-F9)
Two hexagon clamping nuts 25 (0.98)
Lens Two washers
Sensing head Silicone tube 10
(PMMA) M6 x 0.75
Optical fibers, two, 1 dia.

5 dia.

2.2
(0.09) 10
(0.39) 3
2.8 11 14
(0.11) 17.8 2 m (6.56 ft.)
27.8
(1.09)

105
E32 E32

Installation
J SENSING HEAD J CUTTING FIBER
Mounting Sensing Head in a Panel Insert a fiber into the Fiber and determine the length of the fiber
Prepare a hole in the panel that can accommodate the threaded to be cut.
cylindrical sensing head. Be sure to place the washer in front of Press down the Fiber Cutter in a single stroke to cut the fiber.
the mounting nut before inserting the sensing head through the
hole. Tighten the front mounting nut using no more than the When the fiber is cut, an insertion mark is inscribed on the fiber.
maximum torque recommended in the table.
For a 2.2-mm dia. standard fiber only.
Spring mounting clip Insertion mark
12.6
Toothed washers

2.2-dia.

Nuts Insert a fiber into the Fiber Cutter in the direction indicated by the
(attachment)
arrow (refer to the following figure).

Mounting Sensing Head in a Channel 2

Insert the sensing head at the desired location in the channel as

shown in the illustration, then use a set screw to fasten the head
in place. Apply no more than 2.6 in-lb of force in tightening the
set screw.

Retaining screw 1
(M 3 max.)

The cutting holes cannot be used twice. If the same hole is used
twice, the cutting face of the fiber will be rough and the sensing
distance will be reduced. Always use an unused hole.
Use either one of the two holes on the right (refer to the following
figure) to cut a thin fiber as follows:
1. An attachment is temporarily fitted to a thin fiber before
Tightening Torque shipment.
Use a proper-sized
wrench and do not
exceed the torque
recommended for the Temporarily fitted
sensing head.

2. Secure the attachment after adjusting the position of it in the

Sensing heads Maximum torque direction indicated by the arrow.
M3 and M4 threads 6.88 in-lb 3. Insert the fiber into the E39-F4 to cut.
M6 threads 8.66 in-lb
2 mm dia., no thread 2.6 in-lb
3 mm dia., no thread 2.6 in-lb Cutter E39-F4
E32-D14L 8.66 in-lb Two holes for
thin fiber
E32-T12F 6.88 in-lb
E32-D12F 6.88 in-lb Three holes for
E32-T16 4.33 in-lb standard fiber
(2.2 mm dia.)
E32-R21 5.2 in-lb
E32-M21 4.33 in-lb
Note: Insert the fiber in the direction indicated by the arrow.
E32-L25A 6.88 in-lb

106
E32 E32

J FIBER UNITS WITH 90° BEND IN J BENDING RADIUS

STAINLESS STEEL PROBE E39-F11 Sleeve Bender
Applicable Models The bending radius of the stainless probe should be as large as
E32-TC200B/TC200F/DC200F possible. The smaller the bending radius becomes, the shorter
the sensing distance will be.
Appearance
Insert the tip of the stainless probe to the Sleeve Bender and
Stainless Steel Probe with a 90° Bend at the Tip bend the stainless probe slowly along the curve of the Sleeve
Bender (refer to the figure).
Length
1.2 dia. 1.2 dia.
max. 1.3 dia. max.
ℓ1 R min.
R 10
R 12.5 R5
R 7.5
Bending radius ℓ1 (+1)
R 5.0 10.0 mm 15.0 mm Fiber tip position mark

R 7.5 12.5 mm 17.5 mm

R 10.0 15.0 mm 20.0 mm
Stainlessprobe
R 12.5 17.5 mm 22.5 mm
The length overall is 120 mm max.
Note: If larger ℓ1 is required, use the E39-F11 Sleeve Bender.
Stainless Steel Probe with a 90° Bend at the Base

Length
90o max. 10
ℓ2 R

Do not bend here.

Bending radius ℓ1 (+1)

R 5.0 5.0 mm 10.0 mm
R 7.5 7.5 mm 17.5 mm
R 10.0 10.0 mm 20.0 mm
R 12.5 12.5 mm 22.5 mm
The length overall is 120 mm max.
Note: If larger ℓ2 is required, use the E39-F11 Sleeve Bender.

Sensing Distance for Probes with 90° Bends

Part number Amplifier Bending radius
Standard R5.0 R7.5 R10.0 R12.5
E32 TC200B
E32-TC200B E3X-H11 400 mm 260 mm 330 mm 360 mm 400 mm
E3X-Ajj 180 mm 110 mm 140 mm 160 mm 180 mm
E32-TC200F
E32 TC200F E3X-H11 100 mm 55 mm 100 mm 100 mm 100 mm
E3X-Ajj 50 mm 30 mm 50 mm 50 mm 50 mm
E32-DC200F
E32 DC200F E3X-H11 36 mm 30 mm 36 mm 36 mm 36 mm
E3X-Ajj 18 mm 10 mm 18 mm 18 mm 18 mm

107
E32 E32

Proper Supports for Cables

J INSTALLING FIBER CABLES
To support the fiber cable between the sensing site and the
Bends in Fiber cables amplifier, mount the cable using a nylon strap or cable tie. Do not
Plastic and glass filament fiber cables may be bent to avoid use a U-shaped strap that will compress or put stress on the fiber
obstacles on the way to the sensing site. Here are some cable. To prevent damage from excessive vibration, take up the
guidelines about the location of cable bends: The first bend must fiber in a loop as shown below.
be as least 20 mm (0.79 in) away from where the cables enter
Fiber unit
the amplifier. The last bend must be at least 20 mm (0.79 in)
Nylon wireholder
bending the sensing head. We recommend a 25 mm (1.0 in)
minimum radius for a right angle bend to maintain the rated Correct
sensing distance. The sharpest allowable right angle bend is over
Metal holder
a 10 mm (0.39 in) radius, but this will result in a shorter sensing
distance. Refer to the bending radius graph.
Incorrect
40 mm max.

Correct The Fiber Head could be broken by excessive vibration. To

Amplifier prevent this, the following is effective:
Fiber unit

A one-turn loop can

20 mm max. absorb vibrations.

Incorrect
Tape

J LONGER FIBER-OPTIC CABLES

Do not apply excess force on the Fiber Units. Applicable Models
Do not pull or press the Fiber Units. The Fiber Units have a E32-TC200/-DC200
withstand force of 1 kg or 3 kg (pay utmost attention because the E32-TC200B/-DC200B
fibers are thin). E32-TC200E/-DC200E
E32-TC200F/-DC200F
Do not bend the Fiber Units beyond the permissible bending E32-TC200A
radius.
Appearance
Do not bend the edge of the Fiber Units.
ℓ

E3S1-- X3 amplifier with

E32-DC200 diffuse
reflective fiber cable
The length can be ordered in increments of 1 m between
6 m min. and 20 m max. (2-m and 5-m fiber length types are
standard for E32-TC200, E32-DC200.)
Rate of variation (%)

Bending
radius
E39-F10 Fiber Connector
Use the following procedure (refer to the figure) to connect fibers
via the Fiber Connector.

Splice

Retention Unit
Retention Unit
(0.197) (0.394) (0.591) (0.787) (0.984) (1.181)

Bending radius [mm (inch)]

Each fiber should be as close as possible before they are

connected.
Sensing distance will be reduced by approximately 25% when
fibers are connected.
Only fibers with 2.2 mm dia. can be connected.

108
E32 E32

E32-T16 Slit Seal (Attachment)

J SPECIAL HANDLING
Peel the E32-T16 Slit Seal off the ground paper and affix the Slit
E32-D51/-T51 Heat-Resistant Fiber Seal to the sensing face of the sensor so that the corners of the
The bending radius of the fibers should be 35 mm min. Slit Seal fit in with the corners of the sensing face. To sense an
object at a distance of 30 cm max., a 0.5-mm wide Slit Seal must
Connecting fibers via the E39-F10 Fiber Connector is not be used.
possible.
E32-T16 Sensing Head
The withstand temperature of the Heat-Resistant Fibers is 150°C
max. In continuous operation, the ambient temperature should be
130°C max.
Attachment slit
E32-T14/-T51
If the sensor is ON because some object in front of the lenses
reflects light, attach the black seals (sold together) to the lenses.

E32-T14/-G14

Seal

E32-L25 (A) Wafer Sensor

Insert the fiber with a white line into the light projection side of the
Amplifier.
The tightening force of the sensor head is 8 kgf S cm (0.75 N S m).
Avoid places where water could be sprayed onto the E32-L25(A).

NOTE: DIMENSIONS SHOWN ARE IN MILLIMETERS. To convert millimeters to inches divide by 25.4.

R
OMRON ELECTRONICS LLC OMRON ON--LINE OMRON CANADA, INC.
One East Commerce Drive Global -- http://www.omron.com 885 Milner Avenue
Schaumburg, IL 60173 USA -- http://www.omron.com/oei Scarborough, Ontario M1B 5V8
1-800-55-OMRON Canada -- http://www.omron.com/oci 416-286-6465

Cat. No. CEDSAX4 11/01 Specifications subject to change without notice. Printed in U.S.A.

Tech Manual I R 3000
No ratings yet
Tech Manual I R 3000
36 pages
Omrns04046 1-2279559
No ratings yet
Omrns04046 1-2279559
105 pages
Start With Smart!: Fiber Sensor Best Selection Catalog
No ratings yet
Start With Smart!: Fiber Sensor Best Selection Catalog
104 pages
Fiber Selection e Cata
No ratings yet
Fiber Selection e Cata
82 pages
Omron PDF
No ratings yet
Omron PDF
64 pages
T Panda 47
No ratings yet
T Panda 47
78 pages
API 570 - Course Notes
97% (33)
API 570 - Course Notes
173 pages
Start With Smart!: Fiber Sensor Best Selection Catalog
No ratings yet
Start With Smart!: Fiber Sensor Best Selection Catalog
100 pages
Sensores de Visión
No ratings yet
Sensores de Visión
34 pages
EGE Opto Sensors
No ratings yet
EGE Opto Sensors
16 pages
Documentación Fotocélula
No ratings yet
Documentación Fotocélula
16 pages
The Bobath Concept - A Model To Illustrate Clinical Practice: Responding To Comments On Michielsen Et Al
No ratings yet
The Bobath Concept - A Model To Illustrate Clinical Practice: Responding To Comments On Michielsen Et Al
3 pages
Optical Fiber Photoelectric Sensor: Ordering Information
No ratings yet
Optical Fiber Photoelectric Sensor: Ordering Information
64 pages
Anritsu Product Catalog
No ratings yet
Anritsu Product Catalog
80 pages
547983en - Axle Assembly Type 212
No ratings yet
547983en - Axle Assembly Type 212
174 pages
WilliamsonPyrometerCatalog (ENG)
No ratings yet
WilliamsonPyrometerCatalog (ENG)
11 pages
OMRON E3F2 Szenzor
No ratings yet
OMRON E3F2 Szenzor
17 pages
Project
No ratings yet
Project
18 pages
UNIT II New
No ratings yet
UNIT II New
74 pages
Sensor Fibra Omron E3X-SD
No ratings yet
Sensor Fibra Omron E3X-SD
16 pages
E32 FiberOpticSensors
No ratings yet
E32 FiberOpticSensors
62 pages
E3F2 Photoelectric Sensor: Selection Guide
No ratings yet
E3F2 Photoelectric Sensor: Selection Guide
20 pages
E426 E3nx-Fa Brochure en
No ratings yet
E426 E3nx-Fa Brochure en
12 pages
Optical Fiber Catalogue
No ratings yet
Optical Fiber Catalogue
28 pages
E3fa E3ra E3fb E3rb E423-E1 4 1 csm1005987
No ratings yet
E3fa E3ra E3fb E3rb E423-E1 4 1 csm1005987
24 pages
Key Ence
No ratings yet
Key Ence
36 pages
Banner Engineering - Glass Fiber Series - Catalog
No ratings yet
Banner Engineering - Glass Fiber Series - Catalog
43 pages
The Groundwork of The Leschetizky Method
100% (1)
The Groundwork of The Leschetizky Method
136 pages
fx-300 e Cata
No ratings yet
fx-300 e Cata
6 pages
Optic Fiber
No ratings yet
Optic Fiber
29 pages
Start With Smart!: Fiber Sensor Best Selection Catalog
No ratings yet
Start With Smart!: Fiber Sensor Best Selection Catalog
104 pages
Fibras Keyence Area Fu-A40 - 100
No ratings yet
Fibras Keyence Area Fu-A40 - 100
4 pages
Fiber Optic Sensing Solutions
No ratings yet
Fiber Optic Sensing Solutions
32 pages
Project
No ratings yet
Project
21 pages
Industrial Automation: Fiber Optic Sensor Head, Diffuse, M6 Cylindrical Axial, R25 Fiber, 2 M Cable
No ratings yet
Industrial Automation: Fiber Optic Sensor Head, Diffuse, M6 Cylindrical Axial, R25 Fiber, 2 M Cable
4 pages
Sensor de Color
No ratings yet
Sensor de Color
52 pages
Fiber Optics Sensors
No ratings yet
Fiber Optics Sensors
29 pages
Brother FB-N210
No ratings yet
Brother FB-N210
59 pages
Indian Cultue and Heritage
100% (1)
Indian Cultue and Heritage
328 pages
Multi-Tube Micro Blown Cable Netceed Datasheet
No ratings yet
Multi-Tube Micro Blown Cable Netceed Datasheet
4 pages
Linear Heat Series Sensor Cables 2019-03-29
No ratings yet
Linear Heat Series Sensor Cables 2019-03-29
3 pages
PG05E16TE - Plastic Fiber Optic Cables
No ratings yet
PG05E16TE - Plastic Fiber Optic Cables
4 pages
Series: Highly Sensitive Manual Tuning Made Easy
No ratings yet
Series: Highly Sensitive Manual Tuning Made Easy
16 pages
Specialty Optical Fiber Sensing Cable (Sofsc) : Linking The Oil and Gas Industry From End To End
No ratings yet
Specialty Optical Fiber Sensing Cable (Sofsc) : Linking The Oil and Gas Industry From End To End
4 pages
E32-T11NF: Fiber Units For Reliable, Stable Operation in Cutting Oil Environments
No ratings yet
E32-T11NF: Fiber Units For Reliable, Stable Operation in Cutting Oil Environments
3 pages
Sunx FX 11A Analog Fiber Sensors PDF
No ratings yet
Sunx FX 11A Analog Fiber Sensors PDF
10 pages
Elec 5 Raw
No ratings yet
Elec 5 Raw
38 pages
FF Series
No ratings yet
FF Series
4 pages
3 Product Overview 20160908 W
No ratings yet
3 Product Overview 20160908 W
5 pages
Compilation On Guggulu
100% (1)
Compilation On Guggulu
43 pages
Fiber Cable: Specifications (Diffuse Reflective)
No ratings yet
Fiber Cable: Specifications (Diffuse Reflective)
4 pages
Fiber Optic Cable: Diffuse Reflective Type
No ratings yet
Fiber Optic Cable: Diffuse Reflective Type
9 pages
Sensor Fibra Optica R55F Banner
No ratings yet
Sensor Fibra Optica R55F Banner
8 pages
Plastic Fiber Optic Assembly Model PBT26U PBT26U: .02" Diameter Bifurcated Fiber With Threaded Sensing End
No ratings yet
Plastic Fiber Optic Assembly Model PBT26U PBT26U: .02" Diameter Bifurcated Fiber With Threaded Sensing End
2 pages
Fiber Bragg Grating Sensing
No ratings yet
Fiber Bragg Grating Sensing
36 pages
2018-Conferinta Dental Focus-McLaughlin
No ratings yet
2018-Conferinta Dental Focus-McLaughlin
69 pages
Sri Sri Tota Gopinatha Temple and Sri Gadadhara Pandita
100% (1)
Sri Sri Tota Gopinatha Temple and Sri Gadadhara Pandita
37 pages
E32-LT/LD Fiber Unit With Built-In Lens: Achieve Stable, High Power Detection With A Focused Beam
No ratings yet
E32-LT/LD Fiber Unit With Built-In Lens: Achieve Stable, High Power Detection With A Focused Beam
4 pages
New Fibre Materials: Highly Flexible
No ratings yet
New Fibre Materials: Highly Flexible
4 pages
FCS-13USN Carton Taping Machine Operation Manual: Machine Model Date Issue
No ratings yet
FCS-13USN Carton Taping Machine Operation Manual: Machine Model Date Issue
14 pages
TR8 Schematics
100% (1)
TR8 Schematics
7 pages
Glass Fiber Optic Cable: Part Number
No ratings yet
Glass Fiber Optic Cable: Part Number
2 pages
Datasheet E3F2 en Standard
No ratings yet
Datasheet E3F2 en Standard
16 pages
BFO Glass
No ratings yet
BFO Glass
3 pages
Chapter 4 May 2020
No ratings yet
Chapter 4 May 2020
106 pages
Glass Fiber Optic Cables: Minimum Cable Bend Radius
No ratings yet
Glass Fiber Optic Cables: Minimum Cable Bend Radius
6 pages
44-0009-2132-8 7000a-7000a3 Pro North American - Type 11400
No ratings yet
44-0009-2132-8 7000a-7000a3 Pro North American - Type 11400
170 pages
MLBB Game Experimental Research Final Paper
No ratings yet
MLBB Game Experimental Research Final Paper
13 pages
Technical Description: Fiber Optic Sensors Overview
No ratings yet
Technical Description: Fiber Optic Sensors Overview
4 pages
Distributed Fiber Optic Sensors - Brillouin Optical Time Domain Analysis (BOTDA) Sensor in Simple Language
No ratings yet
Distributed Fiber Optic Sensors - Brillouin Optical Time Domain Analysis (BOTDA) Sensor in Simple Language
6 pages
Giz2011 Commercialisation Solar Energy India en
No ratings yet
Giz2011 Commercialisation Solar Energy India en
119 pages
Numerical Inversion of The Laplace Transform Applications To Biology Economics Engineering 1st Edition by Richard Bellman, Robert Kalaba, Jo Ann Lockett B00D6AO6ZQ Download
No ratings yet
Numerical Inversion of The Laplace Transform Applications To Biology Economics Engineering 1st Edition by Richard Bellman, Robert Kalaba, Jo Ann Lockett B00D6AO6ZQ Download
72 pages
CHL2 403PH50HZSS 316055KW
No ratings yet
CHL2 403PH50HZSS 316055KW
2 pages
E3x Da
No ratings yet
E3x Da
3 pages
Trendmaster DSM Datasheet 149831y
No ratings yet
Trendmaster DSM Datasheet 149831y
7 pages
Biomimetics 09 00580
No ratings yet
Biomimetics 09 00580
23 pages
Gengear SPL A-Series
No ratings yet
Gengear SPL A-Series
1 page
3M Packaging Solutions Guide: Right Tapes. Right System. Right Partner
No ratings yet
3M Packaging Solutions Guide: Right Tapes. Right System. Right Partner
52 pages
Veolia Report For July 2015
No ratings yet
Veolia Report For July 2015
5 pages
Interested Fascinating Disappointed Amazing: City Profile: Kyoto, Japan
No ratings yet
Interested Fascinating Disappointed Amazing: City Profile: Kyoto, Japan
5 pages
0079-000-Mscz-Lullaby of Birdland (1952)
No ratings yet
0079-000-Mscz-Lullaby of Birdland (1952)
1 page
Ulcerative Colitis - Etiology, Pathophysiology, Clinical Features, Diagnosis, Treatment (2) Atf
No ratings yet
Ulcerative Colitis - Etiology, Pathophysiology, Clinical Features, Diagnosis, Treatment (2) Atf
12 pages
39 8 9 Math Patterns Problem Solving Arithmetic Operations
No ratings yet
39 8 9 Math Patterns Problem Solving Arithmetic Operations
5 pages
Fisa Tehnica - Amplificator - E3X-NA41
No ratings yet
Fisa Tehnica - Amplificator - E3X-NA41
14 pages
Curs 10 Chimie I-1
No ratings yet
Curs 10 Chimie I-1
12 pages
Provinha 2
No ratings yet
Provinha 2
6 pages
Manual 120726 Imc5050 Carton Sealer
No ratings yet
Manual 120726 Imc5050 Carton Sealer
9 pages
T Series PartsList
No ratings yet
T Series PartsList
4 pages
The Effect of Polysorbate 80 Addition On The Size of Chitosan Nanoparticles From Shrimp Shells Vannamei (Litopenaeus Vannamei) - AIPCP Template PDF
No ratings yet
The Effect of Polysorbate 80 Addition On The Size of Chitosan Nanoparticles From Shrimp Shells Vannamei (Litopenaeus Vannamei) - AIPCP Template PDF
8 pages
FILTROS DE LINEA DONALDSON - Cleaned
No ratings yet
FILTROS DE LINEA DONALDSON - Cleaned
3 pages
Twin Cam Tech Tip 09
No ratings yet
Twin Cam Tech Tip 09
30 pages
PDL 650 MPD 600 Article Acoustic PD Localization With MPD 600 OMICRON Magazine 2013 ENU
No ratings yet
PDL 650 MPD 600 Article Acoustic PD Localization With MPD 600 OMICRON Magazine 2013 ENU
3 pages