Hooks_English.

fm Page 94 Wednesday, November 12, 2008 11:48 AM

Crosby® Eye Hooks

SEE APPLICATION AND
WARNING INFORMATION
Para Español: www.thecrosbygroup.com On Pages 122 - 123

All Crosby 320 Eye Hoist Hooks incorporate the following features:
S-320 & S-320N • The most complete line of Eye hoist hooks.
EYE HOOKS
• Available in carbon steel and alloy steel.
• Designed with a 5:1 Design Factor for (Carbon Steel); 4:1 Design Factor for (Alloy Steel).
• Eye hooks are load rated.
• Proper design, careful forging and precision controlled quenched and tempering give maximum
strength without excessive weight and bulk.
• Every Crosby Eye Hook has a pre-drilled cam which can be equipped with a latch. Even years after
purchase of the original hook, latch assemblies can be added. (See pages 101 - 103)
• Chemical analysis and tensile tests performed on each PIC to verify chemistry and mechanical
properties.
• Type Approval and certification in accordance with ABS 2006 Steel Vessel Rules 1-1-17.7,
and ABS Guide for Certification of Cranes.
• Hoist hooks incorporate two types of strategically placed markings forged into the product which
address two (2) QUIC-CHECK® features:
• Deformation Indicators and Angle Indicators (see following page for detailed definition).

The following additional features have been incorporated in the new Crosby S-320N
Eye Hoist Hooks. (Sizes 3/4 metric ton Carbon through 22 metric ton Alloy.)
• Metric Rated at 5:1 Design Factor for (Carbon Steel); 4:1 Design Factor for (Alloy Steel).
• Can be proof tested to 2-1/2 times the working Load Limit.
• Low profile hook tip.
• New integrated latch (S-4320) meets the World class standard for lifting.
• Heavy duty stamped latch interlocks with the hook tip.
• High cycle, long life spring.
• When secured with proper cotter pin through the hole in the tip of hook, meets the intent
of OSHA Rule 1926.550(g) for personnel hoisting.
• Fatigue rated at 1-1/2 times the Working Load Limit at 20,000 cycles.
s k o o H e y E ® y b s o r C

Working
Load Limit Eye Hook Replacement
(t)* Stock No. Latch Kits
Carbon Alloy
Hook S-320C Carbon S-320A Weight
ID S-320CN G-320CN S-320AN Each S-4320 PL SS-4055
Carbon Alloy Code S.C. Galv. S.C. (lbs.) Stock No. Stock No. Stock No.
3/4 1 †D 1022200 1022208 1022375 .61 1096325 - -
1 1-1/2 †F 1022211 1022219 1022386 .89 1096374 - -
1-1/2 2 †G 1022222 1022230 1022397 1.44 1096421 - -
2 3 †H 1022233 1022241 1022406 2.07 1096468 - -
3 5 †I 1022244 1022249 1022419 4.30 1096515 1092000 -
5 7 †J 1022255 1022262 1022430 8.30 1096562 1092001 -
7-1/2 11 †K 1022264 1022274 1022441 15.00 1096609 1092002 -
10 15 †L 1022277 1022285 1022452 20.77 1096657 1092003 -
15 22 †N 1022288 1022296 1022465 39.50 1096704 1092004 -
20 30 O 1023289 - 1023546 60.00 - 1093716 1090161
25 37 P 1023305 - 1023564 105.00 - 1093717 1090189
30 45 S 1023323 - 1023582 148.00 - 1093718 1090189
40 60 T 1023341 - 1023608 228.00 - 1093719 1090205
* Eye Hooks (3/4 TC - 22TA), Proof load is 2.5 times Working Load Limit. Eye Hooks (20 TC - 60TA), Proof Load is 2 times Working Load Limit.
All carbon hooks-average straightening load (ultimate load) is 5 times Working Load Limit. Alloy eye hooks 1 ton through 22 ton-average
straightening load (ultimate load) is 5 times Working Load Limit. Alloy eye hooks 30 tons through 60 tons-average straightening load (ultimate
load) is 4.5 times Working Load Limit.
† New 320N style hook.

94 Copyright © 2008 The Crosby Group, Inc.

All Rights Reserved