NFR12C20A thru NFR12C60A ®
NFR12C20A thru NFR12C60A Pb
Pb Free Plating Product
12.0 Ampere Negative Polarity Common Anode Fast Recovery Rectifier
ITO-220AB Unit : inch (mm)
Features
¬ Fast switching for high efficiency .406(10.3) .189(4.8)
.100(2.55)
.112(2.85)
.165(4.2)
.272(6.9)
.248(6.3)
.381(9.7)
.134(3.4)
¬ Low forward voltage drop .118(3.0)
.130(3.3)
.114(2.9)
¬ High current capability
¬ Low reverse leakage current
.606(15.4)
.583(14.8)
¬ High surge current capability
Mechanical Data .071(1.8)
.114(2.9)
.098(2.5)
.512(13.0)
.543(13.8)
.161(4.1)MAX
.055(1.4)
¬ Case:ITO-220AB Isolated/Insulated .055(1.4)
.039(1.0)
.032(.8)
MAX
¬ Epoxy: UL 94V-0 rate flame retardant
.035(0.9)
.011(0.3)
¬ Terminals: Solderable per MIL-STD-202 .1
(2.55)
.1
(2.55)
method 208
¬ Polarity:As marked on diode body
Case Case Case
¬ Mounting position: Any Negative
Positive
¬ Weight: 2.2 gram approximately
Doubler
Common Cathode Common Anode
Suffix "C" Suffix "A" Suffix "D"
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Rating at 25oC ambient temperature unless otherwise specified.
Single phase, half wave, 60Hz, resistive or inductive load.
For capacitive load, derate current by 20%.
NFR12C20C NFR12C40C NFR12C60C
SYMBOL NFR12C20A NFR12C40A NFR12C60A UNIT
NFR12C20D NFR12C40D NFR12C60D
Maximum Recurrent Peak Reverse Voltage VRRM 200 400 600 V
Maximum RMS Voltage VRMS 140 280 420 V
Maximum DC Blocking Voltage VDC 200 400 600 V
Maximum Average Forward Rectified
o IF(AV) 12.0 A
Current TC=100 C
Peak Forward Surge Current, 8.3ms single
Half sine-wave superimposed on rated load IFSM 100 A
(JEDEC method)
Maximum Instantaneous Forward Voltage
VF 0.98 1.3 1.7 V
@ 6.0 A
Maximum DC Reverse Current @TJ=25 C
o
10.0 uA
o IR
At Rated DC Blocking Voltage @TJ=125 C 250 uA
Maximum Reverse Recovery Time (Note 1) Trr 35 nS
Typical junction Capacitance (Note 2) CJ 65 pF
o
Typical Thermal Resistance (Note 3) R JC 2.2 CW
Operating Junction and Storage -55 to +150 o
TJ, TSTG C
Temperature Range
NOTES : (1) Reverse recovery test conditions IF = 0.5A, IR = 1.0A, Irr = 0.25A.
(2) Measured at 1.0 MHz and applied reverse voltage of 4.0 Volts DC.
(3) Thermal Resistance junction to case.
Page 1/2
© 2006 Thinki Semiconductor Co.,Ltd. http://www.thinkisemi.com/
NFR12C20A thru NFR12C60A ®
FIG.1 - FORWARD CURRENT DERATING CURVE FIG.2 - MAXIMUM NON-REPETITIVE
PEAK FORWARD SURGE CURRENT
12 100
Pulse Width 8.3ms
PEAK FORWARD SURGE CURRENT,
Single Half-Sire-Wave
AVERAGE FORWARD RECTIFIED
(JEDEC Method)
10 80
CURRENT, AMPERES
AMPERES
7 60
5 40
2 20
60 Hz Resistive or
Inductive load
0 0
0 50 100 150 1 10 100
o NUMBER OF CYCLES AT 60Hz
CASE TEMPERATURE, C
FIG.3 - TYPICAL INSTANTANEOUS FIG.4 - TYPICAL REVERSE CHARACTERISTICS
FORWARD CHARACTERISTICS
1000
IINSTANTANEOUS FORWARD CURRENT,
10
INSTANTANEOUS REVERSE CURRENT,
NFR12C20A
o
TJ=125 C
100
NFR12C40A
MICROAMPERES
6
NFR12C60A
AMPERES
10
o
TJ=25 C
o
TJ=25 C
PULSE WIDTH=300uS
1% DUTY CYCLE
0.1 0.1
0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 0 20 40 60 80 100
INSTANTANEOUS FORWARD VOLTAGE, PERCENT OF RATED PEAK REVERSE VOLTAGE,%
VOLTS
FIG.5 - TYPICAL JUNCTION CAPACITANCE
1000 o
TJ = 25 C
f = 1.0 MHZ
Vsig = 50mVp-p
JUNCTION CAPACITANCE, pF
100
10
0.1 1.0 4.0 10 100
REVERSE VOLTAGE, VOLTS
Page 2/2
© 2006 Thinki Semiconductor Co.,Ltd. http://www.thinkisemi.com/
