320 Series

Vertical Sump Pumps

Flows to: 9,200 GPM

Heads to: 985 Feet
Temperatures to: 400°+ F
140 Years of Pump Manufacturing

American-Marsh Pumps, one of the oldest provided cost effective solutions by building
pump lines in America, are pump products pumps to last. Durability by design is always the
steeped in heritage. Since 1873, the American- most cost effective solution. From engineering
Marsh line of pumps has withstood the test of and design to final assembly, experienced people
time. During the last 140 years, over 100 vari- control each step of the manufacturing process
eties of pumps have been designed and built. with quality control inspections performed at
From steam pumps to centrifugal pumps, each step. All pumps shafts are heat straight-
American-Marsh pumps have been built to ened. All impellers are computer balanced.
meet the ever changing requirements of society. Pump testing is done in our new state of the art
Over the last century through continuous prod- test facility. All of these factors ensure you
uct development, more American-Marsh mod- receive consistent quality product every time.
els have been retired than most other pump American-Marsh Pumps has provided quality
manufacturers have ever produced. Hundreds pump products for over 140 years. At
of thousands of pumps have been made, all American-Marsh Pumps, we know that long life
designed for longevity, allowing many of them and superior performance are the keys to satis-
to continue servicing customers over 50 years. fied customers. By understanding your needs,
All of our pumps have three superior charac- we can design products that meet those needs.
teristics; Design, Performance, and Durability. Our product family reflects years of customer
Our engineering department, which includes an input, product upgrades, redesign and new
in-house pattern shop, designs each pump so product development, all focused on meeting
that installation and maintenance is easy. Our and exceeding your expectations.
performances are engineered to meet or beat
the competition in each category. For 140
years, American-Marsh Pumps products have

800

700

600

500
TDH (FT)

400

SREM
300

200

SOSM
100

0
1000 2000 3000 4000 5000 6000 7000 8000 9000 10000
FLOW (GPM)
 Specifications
Models SREM & SOSM
Casing: The SREM casing is constructed of high Casing Wear Rings: Standard SREM enclosed
tensile cast iron or other specified material. It is of impellers are designed with integral case wear
the volute type, carefully and accurately propor- rings accurately turned to provide close running
tioned to permit smooth flow and to convert high fits in the casing. The diameters of these rings are
velocity energy of the fluid as it leaves the impeller such as to reduce end thrust to a minimum. On
into pressure. Suction and discharge nozzles are larger models a rear case wear ring is provided for
casted integral with the volute and are of 250 psi additional wear resistance.
dimensions. All SREM models feature a 250 psi Inboard Head: The SREM inboard head is con-
case working pressure. The casing has cast integral structed of cast iron or other specified material.
feet standard and the discharge port is of the ver- The SOSM inboard head is constructed of cast
tical centerline type. Necessary vent and drain steel or other specified material. The inboard head
openings are provided. The SOSM casing is con- connects the fluid end to the support pipe and
structed of high tensile cast steel or other specified contains the inboard head bearing.
material. It is of the volute type, carefully and
accurately proportioned to permit smooth flow Shaft: The shaft is of 416 stainless steel, pol-
and to convert high velocity energy of the fluid as ished and of large diameter to prevent vibration.
it leaves the impeller into pressure. Suction and Lineshaft bearings are spaced to minimize shaft
discharge nozzles are flanged and are cast integral deflection. The shaft is supported by the thrust
with the volute. The casing has cast integral feet bearing housing, located at the surface plate,
standard and the discharge port is of the vertical which has integral lateral adjustment.
centerline type. The casing assembly fully meets Support & Discharge Pipe: The support pipe is
ANSI B73.1 dimensional and performance of black iron, one end flanged to the inboard
requirements. Necessary vent and drain openings head and the other end flanged to the sump
can be provided upon request. cover. Intermediate bearings will be flanged
Impellers: The SREM impeller is of the end between multiple pieces of support column and
suction type, casted in one piece of 304 stainless spaced accordingly. The discharge pipe is flanged,
steel or other specified material. All impellers are one end connected to the discharge elbow and
hydraulically and dynamically balanced prior to the other to the system piping. This pipe connec-
assembly and all impellers have pump out vanes or tion terminates three inches above the sump cover
a rear case wear ring standard on the back side of plate.
the impeller to reduce material from building up Discharge Elbow: The discharge elbow is of
near the inboard bearing. The SOSM impeller is high tensile cast iron or of other specified material
of the reverse vane, end suction type, casted in and of the long radius type flanged to the dis-
one piece of cast steel or other specified material. charge of the casing and to the discharge pipe
Running clearances need to only be adjusted assembly.
between the back of the impeller and the casing Sump Cover: The sump cover is of carbon steel,
adapter. This design allows for repeatable factory teardrop or of other shape as desired. The sump
tolerances. All impellers are hydraulically and cover supports the entire weight of the complete
dynamically balanced prior to assembly. Front pump assembly. Optional simplex and duplex sole
semi-open impellers can be supplied upon request. plates are available with a four inch vent and a
All models meets the stringent performance manhole cover designed to give access to the
requirements of ANSI B73.1. American-Marsh pumping assemblies.
Pumps also offers 4 Low-Flow models to meet
difficult low-flow/high-head process applications.
Model SREM Vertical Sump
Teardrop Baseplate
Sizes: 1-1/2" to 12" Discharge
• Eliminates removing entire
Flows: 9000 GPM coverplate for servicing pump
Heads: 450 Feet TDH Motor • Motor pedestal, thrust bearing
Temp: 250° F Enclosed Impeller housing, discharge pipe, optional
• Stocked C-face for quick delivery float switch and optional stuffing box
Pit Depths: 25' Settings all mount to baseplate

Services:
• Aerospace Thrust Bearing Housing
• Integral thrust bearing housing featuring
• Building Trades simplex bearing or optional duplex bearing
• Chemical • Optional stuffing box

• Construction
• Food & Beverage
• General Industry
• Marine
• Mining & Aggregate Float Rod Stuffing Box
(optional)
• OEM • Used for gas tight applications
• Oil & Gas • Constructed of bronze or other
specified alloy
• Power Generation
• Petro-Chemical
• Pharmaceutical
• Pulp & Paper
• Semiconductor
• Water & Wastewater
 Inboard Head
Shaft
Stuffing Box (optional) • Heavy duty cast iron
• Close to impeller to • Designed and sized
• The stuffing box option features an
increase life of pump especially for the pump
integral lantern ring and heavy duty
• Heavy duty fluted, and its applications
throat bushing
steady bearing available • Oversized for
• External grease lubrication or water
in optional metallurgy unplanned loads
flush can easily be added to the
• Steady bearing can • High tensile 416
standard box
be lubricated from stainless steel or
• Optional dry running seals can be
outside source other specified alloy
supplied upon request
• This bearing can be • Bearing housings with
lubricated with the integral lineshaft bearings
pumped fluid or from are installed every 4 to 5
the surface plate using feet to minimize shaft
pumped fluid, water, whip and deflection
grease or oil • Wide variety of bearings
• Wide variety of bearings available to meet specific
Lineshaft Bearing
available to meet specific requirements
Housing & Bearing requirements
• "Real" lineshaft bearing housings
with heavy duty design
• All lineshaft bearings and housings
are externally drilled for flushing
requirements
• This bearing housing can be
lubricated with the pumped fluid
or from the surface plate using
pumped fluid, water, grease or oil
• Wide variety of bearings available
to meet specific requirements

Impeller Casing
• Standard ASTM A48 Class 30
• One piece 304 stainless steel or other alloy cast iron
• Expertly machined to customer specifications • Heavy wall thickness to provide generous
• Fully balanced prior to assembly corrosion allowance
• Available in enclosed impeller design • Replaceable casing ring provides liberal
• Impeller wear rings can be supplied upon request clearance with minimum leakage
Model SOSM Vertical Process Sump
Flows To: 7,400 GPM Teardrop Baseplate
Heads To: 985 Feet • Eliminates removing entire coverplate for
Temps To: 400° F servicing pump
Reverse Vane Semi-Open Low Flow • Motor pedestal, thrust bearing housing,
Pit Depths: 25' Settings Impeller Impeller Impeller
discharge pipe, optional float switch and
optional stuffing box all mount to baseplate
Markets:
Motor
• Chemical
• Stocked C-face for
• Food & Beverage quick delivery

• General Industry
• Marine
• Mining & Aggregate
• Oil & Gas Thrust Bearing Housing
• Power Generation • Integral thrust bearing housing
featuring simplex bearing or
• Petro-Chemical optional duplex bearing
• Optional stuffing box
• Pharmaceutical
• Pulp & Paper
• Water & Wastewater

Float Rod Stuffing Box

(optional)
• Used for gas tight applications
• Constructed of bronze or other
specified alloy
 Inboard Head Shaft
Stuffing Box (optional)
• Heavy duty cast steel • Designed and sized
• The stuffing box option features an especially for the pump
integral lantern ring and heavy duty or other specified alloy
• Close to impeller to and its applications
throat bushing • Oversized for
• External grease lubrication or water increase life of pump
• Heavy duty fluted, unplanned loads
flush can easily be added to the • High tensile 416
standard box steady bearing
available in optional stainless steel or
• Optional dry running seals can be other specified alloy
supplied upon request metallurgy
• Steady bearing can • Bearing housings with
be lubricated from integral lineshaft bearings
outside source are installed every 4 to 5
• Wide variety of feet to minimize shaft
Lineshaft Bearing bearing available whip and deflection
to meet specific • Wide variety of bearing
Housing & Bearing available to meet specific
requirements
• "Real" lineshaft bearing housings requirements
with heavy duty design
• All lineshaft bearings and
housings are externally drilled
Casing
for flushing requirements • Standard cast steel or
• This bearing housing can be other specified alloy
lubricated with the pumped fluid • Heavy wall thickness to
or from the surface plate using provide generous
pumped fluid, water, grease or oil corrosion allowance
• Wide variety of bearings available
to meet specific requirements

SNCM (option)
• Impeller is one piece casted in cast
iron or other specified alloy and
expertly machined to customer
specifications Impeller
• High efficiency tangential casing
casted in cast iron or other • One piece cast steel or other specified alloy
specified alloy • Expertly machined to customer specifications
• Fully balanced prior to assembly
• Impellers are available in Reverse Vane, Semi-Open
and Low-Flow designs
• Impeller wear rings can be supplied upon request
 Our long tradition of quality pump manufacturing began in 1873 making
us one of the first pump manufacturers in this country. American-Marsh
Pumps provides the user dependability and durability. Durability by design is
always the most cost effective solution.
SHAFTS
WEAR RINGS
American-Marsh Pumps standard product design
includes 416 stainless steel shafts designed for mini- Impeller and case wear rings are oversized
mum shaft deflection in high temperature environ- with large wearing surfaces to extend the life
ments. Each shaft is machined to close tolerances of each pump. Rings are available in bronze,
and designed to exceed HP requirements of each iron, stainless steel or other alloys as required.
pump.

IMPELLER
Impellers are one piece 304 stain-
less steel or other alloy expertly
machined to customer specifica-
tions. Back pump out vanes or rear
case wear ring prohibit material
from building up behind impeller.

CASING
The casing is provided with additional thickness for
corrosion allowance. Surfaces are machined to accurate
tolerances in our machining centers.

OTHER PUMP PRODUCTS

SPLIT CASE VERTICAL TURBINE SELF PRIMER REGENERATIVE TURBINE END SUCTION
To 32+" Discharge To 42+" Bowl To 12" Discharge To 2-1/2" Discharge To 12" Discharge
30,000+ GPM, 550' 85,000+ GPM, 2500' 6400 GPM, 200' 140 GPM, Heads to 750' 9000 GPM, 450'

American-Marsh Pumps Distribution/Service Centers:

185 Progress Road Nebraska: 2599 South Cornhusker Avenue, Hastings, NE 68901 (800)408-7167
Collierville, TN 38017 California: 3269 East North Building D, Fresno, CA 93725 (800) 288-7167
AM320-4-1-2013

PH: (800)888-7167 Florida: 2805 Badger Road, Lakeland, FL 33811 (800) 444-7167
FX: (901)860-2323 Louisiana: 1626 Walker Road, Scott, LA 70583 (800)506-7167
www.american-marsh.com