Scribd
Upload
3K views1 page

CAV/Delphi Pump Timing Guide

The document provides information about fuel injection pumps for Phaser/1000 series engines, including: - The type of fuel injection pump is usually a Lucas CAV or Delphi DPA/DPS. - The rotation direction is clockwise when viewed from the drive end. - The outlet for number 1 cylinder is identified by a letter "W" or "Y" depending on the pump model. - Static timing is checked using a special tool with the number 1 piston at top dead center on the compression stroke, and the pump set at the start of injection for the number 1 cylinder. - The setting code includes letters to indicate the correct engine check angle and pump mark angle for static timing

Uploaded by

Nik
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
3K views1 page

CAV/Delphi Pump Timing Guide

The document provides information about fuel injection pumps for Phaser/1000 series engines, including: - The type of fuel injection pump is usually a Lucas CAV or Delphi DPA/DPS. - The rotation direction is clockwise when viewed from the drive end. - The outlet for number 1 cylinder is identified by a letter "W" or "Y" depending on the pump model. - Static timing is checked using a special tool with the number 1 piston at top dead center on the compression stroke, and the pump set at the start of injection for the number 1 cylinder. - The setting code includes letters to indicate the correct engine check angle and pump mark angle for static timing

Uploaded by

Nik
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
  • Engine Timing and Fuel Injection

Phaser/1000 Series 2

Engine timing (Lucas CAV/Delphi DPA and DPS) fuel injection pump
Fuel injection pump
Type. ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... .. DPA or DPS
Direction of rotation from drive end . ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... .. Clockwise
Outlet for number 1 cylinder:
- AA, AB, AC, AD. ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... .. Letter "W"
- YA, YB, YC, YD. ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... Letter "Y"
Static timing
The engine check angle must be used with special tool 21825610 and with the engine set with number 1 piston
at top dead centre (TDC) on the compression stroke. The pump is checked with the pump set at the start of
injection for number 1 cylinder.
The code letters are included in the setting code stamped on the data plate of the fuel injection pump. Some
fuel pumps may have the setting code stamped on a modification plate which is fastened to the flange of the
pump. If a modification plate is fitted, use the code letters stamped on this plate.
A typical setting code is 2643C601BM/4/2860; in this example the code letters are "BM".
Engine check angle Pump mark angle
Fuel pump code letters
(degrees) (degrees)
AK 325.5 336
AM 282 290.5
BF 326 334
BM 281 291
CM 282.5 291.5
DM 282.25 290.5
FK 325.5 336
GK 325 336
GM 282 290.5
HK 326 336
HM 282 291
JK 325 334
KK 325 334
LK 327 337.5
LK(1) 328 337.5
MK 326 336
(2)
MK 325 336
PK 326 334
RK 328 336
RM 282.5 290.5
TK 327 334
UK 326 334
XM 282 291

(1) Effective from engine list YA 31257.


(2) Effective from engine list YA 50532.

Workshop Manual, TPD 1312, issue 2 45

You might also like