Air Conditioning

R134a Water-Cooled Chillers

Process Cooling

Water Cooled Chillers

Nominal capacity range:

173 kW to 668 kW
49.2 RT to 190.0 RT
The Hitachi Water Cooled Chiller is the perfect answer to user needs.

R134a
Incorporating proprietary cutting edge technology, Hitachi's Water
Cooled Chiller combines high efficiency with high performance.
New model chiller lineup featuring a G-type semi-hermetic twin-screw
compressor using the environmentally-friendly R134a refrigerant.
In addition to low noise, low vibration, high efficiency and high perfor-
mance, the new models come with a user-friendly touch panel type
liquid crystal screen display that allows you to check operation status Environmentally friendly
at a glance and has a full range of control functions. HFC134a refrigerant
As the perfect answer to user needs, Hitachi's chillers are designed to
cover a broad range of applications from air conditioning of buildings
to cooling of factories. R134a G-type
twin-screw compressor

High efficiency shell-and-tube

Air Conditioning at Office Buildings
dry type evaporator

User-friendly touch panel type

liquid crystal screen display

Nominal capacity range:

173 kW to 668 kW
49.2 RT to 190.0 RT
Process Cooling at Factory

Hitachi Water Cooled Chillers

 Green

Accurate

Use of HFC134a refrigerant has an ozone depletion potential of zero Adopting Hitachi R134a Screw Compressor

Chlorofluorocarbons (CFCs) in the stratosphere are exposed Since 1972 when we started manufacturing them, we have
Sun
to ultraviolet rays which decompose them, and generate delivered more than 170,000 Hitachi twin-screw compres-
chlorine atoms. It is thought that the chlorine atoms combine Harmful Ordinary ultraviolet rays sors to countries around the world where they continue to
ultraviolet rays
with oxygen atoms in ozone to destroy the ozone. Because Ozone layer meet essential air conditioning needs.
HFC134a has no chlorine atoms, it does not destroy the Chlorofluorocarbons, etc.
Our new water-cooled chillers are G-type semi-hermetic
ozone in the atmosphere. Ozone layer destruction twin-screw compressors that run only on the R134a refrigerant.
(ozone hole)
Surface of earth Powerful cooling capacity, low vibrations and low noise
coupled with a simple compressor configuration have Operation Image
Discharged gas
greatly enhanced reliability.
Cyclone
Suctioned refrigerant gas
oil separator
Shell & tube dry type evaporator The cyclone oil separator they employ has been designed Screw rotor
with extensive use of computer simulation.
Thanks to these efforts, oil separation efficiency is greatly
3 Our new chillers use a shell-and-tube dry type evaporator.
Oil
4
increased.
Their low refrigerant charge reduces its environmental Oil reservoir

impact compared with flooded type. Differential pressure

lubrication mechanism

High performance and Comparison of COP R134a

Model
R407C
energy saving 120HP Chillers as examples
Model

Multiple Compressors control

The high heat exchanger effectiveness provided by the high 120%
100%
operating efficiency of the semi-closed twin-screw compres-
Hitachi water chiller units feature a modular. No.1
sor combined with a high performance shell-and-tube dry Operating No.2 No.3
8 units with the same model can be connected via H-LINK  Operating Stop Maintenance /
type evaporator result in unprecedented energy savings.
transmission, so as to realize the maximum capacity of Service
1,520RT.
So each module can be packed and transported individually
for more convenient local installation and displacement.

150
Further, the refrigerant system of each module can be
Accurate chiller control Efficient op
eration area
operated independently, which makes maintenance easier.
Change rate (%)

No.1
If unexpected trouble occurs in one module, the remaining No.3 No.3
100 Operating No.2
modules are operated as a backup.  Operating Error
Improved intermediate efficiency
Failure
50
Change ra
te of COP Error

Change ra
50
te of the co 100
mpressor
load (%)

Hitachi Water Cooled Chillers

 Intuitive Dimensional Data

RCU50/60WHZ-X (unit: mm)

900 703
Main power line hole (φ78)

Compressor Electrical box

Control power line hole (φ32.5)

360

728
Evaporator

Easy-to-view, user-friendly touch panel type liquid crystal screen display

492
Cooling water outlet Chilled water outlet

1514
(DN65 flange) (DN80 flange)

Cooling water inlet

(DN65 flange)
Cooling water inlet

350
The display makes it easy to view the current operating state

250

764
(DN80 flange)
Lifting support x 4
Condenser
and simplify the setting procedure. (supplied by the manufacturer)

297
Various parameters can be confirmed at a glance.
Regardless of operating state, the interface keyboard allows Rigging holes 225 473 812

280
(4-φ40) 50 30 970 50

you to set a variety of operation modes. 500 1030 500

318 1110

Mounting holes (4-φ26) 1960

A warning log function makes it possible to recall the ten
most recent warning events.
The user interface is provided in both English and Chinese.
RCU80/100/125WHZ-X (unit: mm)

Electrical box 1230 500

Main Screen Main power line hole (φ112.5)
Compressor
Control power line hole (φ32.5)

5 Evaporator 6
Cooling water outlet

762
312
(RC4”)
Chilled water outlet
Cooling water inlet (DN125 flange)

1569
(RC4”)

Cooling water inlet

1076

400
Condenser

170
(DN125 flange)

805
Lifting support x 4

372
Compressor Screen Status Screen Parameter setting Screen Setting Screen (supplied by
the manufacturer)
Rigging holes

284
2195
50 30 1145 50
(4-φ40)
1205 391 2163 489

500 1256 500 3043

Mounting holes (4-φ26)

Building Management System (BMS)

A BMS-connecting interface can be supplied. Through H-LINK transmission, at most of 8 chillers of the same model
RCU150/190WHZ-X (unit: mm)
can be connected to realize a maximum volume of 1520RT.
1796 1430
Electrical box

Compressor
Main power line hole
No.1 No.2 No.3 No.4 (φ64.5)

Control power line hole Evaporator

MODOBUS RTU
(φ32.5)
protocol (option) Cooling water outlet
(DN100 flange) Chilled water outlet

1821
(DN125 flange)
BMS System Cooling water inlet
(Supplied by BMS Maker) (DN100 flange)
H-LINK Transmission

508
Cooling water inlet
280

896
(DN125 flange)
Condenser
Other Building System No.5 No.6 No.7 No.8
365

281
Rigging holes 81 1168 Mounting holes 598 2200
(4-φ40) 48 26
1235 (4-φ26) 442 2513
1330 614 2288
Lighting Elevator Alarm
3510

Surface of earth

Hitachi Water Cooled Chillers

General Data
RCU RCU RCU RCU RCU RCU RCU
Model
50WHYZ-X 60WHYZ-X 80WHYZ-X 100WHYZ-X 125WHYZ-X 150WHYZ-X 190WHYZ-X
kW 173 216 280 358 443 528 668
Cooling Capacity Range
RT 49.2 61.4 79.6 101.8 126.0 150.2 190.0
- Continuous Capacity Control
Cooling Capacity Control
% 100~25, 0 100~25, (12.5)*, 0 100~25,(16.7)*, (8.3)*, 0

Refrigerant - R134a (charged)

Refrigerant Flow Control - Electronic expansive valve
Circuit Qty. - 1 2 3
Type - Semi-Hermetic Screw Compressor
Compressor
Qty. - 1 2 3
Condenser - Shell & Tube Type
Evaporator - Shell & Tube Type, Dry Expansion Type

Three-Phase Over current Relay, High-Pressure Switch, High and Low-Pressure Control, Oil Heater,
Safety Device - Internal Thermostat for Compressor Motor, Freeze Protection Control, Reverse Phase Protection Control,
Discharge Gas Overheat Protection, Compressor frequent ON/OFF control and Pressure Relief Valve

Condenser Inlet - DN65 Rc4” DN100

Piping Connection Outlet - DN65 Rc4” DN100

Evaporator Inlet - DN80 DN125 DN125

Piping Connection Outlet - DN80 DN125 DN125
Length mm 1,960 3,043 3,510
Outer Dimensions Width mm 1,030 1,227 1,330
Height mm 1,514 1,569 1,821
Length mm 2,110 3,160 3,660

Shipping Dimensions Width mm 1,270 1,380 1,470

Height mm 1,760 1,820 2,140

Net Weight kg 1,140 1,200 2,120 2,280 2,410 3,500 3,750
Packed Weight kg 1,270 1,330 2,290 2,450 2,580 3,720 3,970

1. Cooling capacity is based on GB/T18430.1: 5. Design, testing and acceptance of the equipment is based on
Condenser chilling water inlet /Nominal water flow： 30˚C / 0.215 m3 / ( h . k W ) GB/T18430.1-2007
Evaporator chilled water outlet /Nominal water flow： 7˚C / 0.172 m3 / ( h . k W ) Vapor Compression Cycle Water Chilling (heat pump) Unit Part I:
Industrial or Commercial Water Chilling (Heat Pump) Unit or That With Similar Uses.
2. Power supply chosen
Main power (3φ) 380V 50Hz/415V 50Hz 6. Unit noise is tested according to the provisions in JB/T4330 Noise Measurement
Operating power supply (1φ) 220V 50H/240V 50H of Cooling and Air Conditioning Equipment within a half-space on a reflection plane.
Measuring points are arranged at 1.0m in front of the unit center and 1.5m,
3. Capacity control data in ( ) marked with * can be realized with a switch.
from the ground.
4. Working range
* During practical installation, due to the reflector around, noise of the unit is greater
Cooling water outlet temperature 22˚C-40˚C
than the nominal value generally.
Chilled water outlet temperature 5˚C-20˚C

http://www.jci-hitachi.com

Printed in Japan (H) HR-E621P Oct. 2015