PRODUCT RANGE 2021

CONTENT
06 TRACTORS

50 FRONT LOADERS

54 CITYLINE–RANGE

58 COMBINE HARVESTERS

72 SDF SMART FARMING SOLUTIONS

76 SERVICE AND FINANCING

TOMORROW’S TRACTORS
CANNOT BE BUILT WITH
YESTERDAY’S TECHNOLOGY.
High-performance tractors produced at
Europe’s most modern production site.

Today’s farmers and agricultural contractors rely on innovative tech- DEUTZ-FAHR Land, the most modern tractor production site, was
nology, highest quality standards, ergonomic ease of use and max- opened in 2017. Here the high-performance tractors ranging from
imum productivity. DEUTZ-FAHR’s tractor program, ranging from 120 to 340 hp come to life to fulfil farmers’ needs worldwide.
50 to 340 hp, offers the matching tractor for each and any field of
application and farm size: proven configurations to face real-world The company’s headquarter is located in Treviglio (Northern Italy)
challenges and a broad selection of practical variants make the where all series up to 125 hp are produced. The 5D Keyline series
­D EUTZ-FAHR tractors unique and top-performance workhorses. is produced in the production site in Bandirma (Turkey). A further
DEUTZ-FAHR production site is located in Ranipet (India) for the
Combined with the cutting-edge SDF Smart Farming Solutions, ­production of the 4E series and Agroplus F Keyline.
­D EUTZ-FAHR offers tailormade technological solutions to maximise
your efficiency on field and road alike. That is why you can rely on The DEUTZ-FAHR combines are produced in the production plant in
DEUTZ-FAHR to be the ideal partner to optimize your businesses’ Zupanja, Croatia.
profitability.

4 - DEUTZ-FAHR
  We are setting new standards in production efficiency and quality.

 Lauingen. Unique in tractor production: the axle and chassis dynamometers.  Bandirma, Turkey: home of the 5D Keyline series.

  Ranipet, India: home of the 4E series.   Treviglio, Italy: home of the small and middle range tractors.

DEUTZ-FAHR - 5
TRACTORS.
HP
page 20 30 40 50 60 70 80 90 100 110 120 130 140 150 160 170

9 SERIES 8

8 SERIES 10

7 SERIES 12

6 SERIES 14 6120-6140 / 6 Series 6 cyl. / 6 Series

5 SERIES 22 5D Keyline /5D Ecoline / 5D / 5D TTV / 5G / 5

4E SERIES 33

WARRIOR EDITION 34

3 / Agroplus F Keyline / 5DF Ecoline

SPECIALISED 36 5DF-S-V / 5DF-S-V TTV

CRAWLERS 46 5K / 5KM / 5KF

Due to emissions changes in 2021, some models are only available as long as stock lasts.

6 - TRACTORS
180 190 200 210 220 ...240 ...260 ...280 ...300 ...320 ...340

4 cyl.
 9 SERIES TTV
Technical data
9290 9310 9340
ENGINE DEUTZ
Emissions Stage V
Cylinders / Displacement n° / cm³ 6 / 7,755
Max. power (ECE R120) kW / hp 217 / 295 229 / 312 247 / 336
Power at rated engine speed (ECE R120) kW / hp 204 / 277 218 / 296 232 / 316
Max. lifting capacity kg 12,000
Wheelbase mm 3,135
Weight kg 12,000

8 - TRACTORS
9 SERIES TTV.
Designed to simplify your life.
Engineered to magnify your results.

With the 9 Series DEUTZ-FAHR engineers have developed an newly developed axle suspension system with dry disc brakes for
ultramodern, highly intelligent, high-horsepower tractor, which maximum safety, 12,000 kg lift capacity at the rear and automatically
facilitates and accelerates all works thanks to unique operating comfort, opening bonnet for the fastest access to all maintenance points.
automated routine functions and the most innovative technologies – Each individual component of the 9 Series is highly innovative and
and all this while consuming the lowest amount of resources. 50,000 is among the best in the market. With the 9 Series DEUTZ-FAHR
lumen LED working light, MaxiVision 2 cab with 12" iMonitor3 and offers three perfectly balanced and highly attractive high-horsepower
the most innovative precision farming equipment, highly efficient tractor models with which farmers and contractors can achieve the
engines from 295 to 336 hp, TTV continously variable transmission best results.
for precise speeds from 0.2 to 60 kph at reduced engine speed,

Features • Deutz 7.8 TTCD Stage V common rail, 6-cylinder, 24-valve, twin-turbo intercooled engine with SCR
system and DPF exhaust gas post-treatment
• TTV continuously variable transmission with 4 working ranges
• Maximum speed: 60 kph (where permitted)
• Powerbrake servo-assisted braking system and automatic Electric Parking Brake (EPB)
• Front axle with suspension and external disc brakes
• 210 l / min load-sensing hydraulic system
• MaxiVision 2 cab with interior trims in hi-tech materials, maximum ergonomics and comfort
• MaxCom armrest with integral joystick for control of the main tractor functions
• iMonitor3 with integral ISOBUS system and Agrosky
• One-piece, electric opening bonnet and LED light clusters

 An electrically controlled opening hood helps make light work  60 kph and maximum safety with external disc brakes.
of maintenance operations.

TRACTORS - 9
 Technical data 8280 TTV
ENGINE DEUTZ
Emissions Stage V
Cylinders / Displacement n° / cm³ 6 / 6,057
Max. power (ECE R120) kW / hp 211 / 287
Power at rated engine speed (ECE R120) kW / hp 197 / 268
Max. lifting capacity kg 11,100
Wheelbase mm 2,918
Weight (min. / max.) kg 9,500 / 10,300

10 - TRACTORS
8 SERIES TTV.
Your reliable, powerful and connected working machine.

The new 8280 TTV is a reliable, powerful and fully connected working Due to a wide offering of specifications, the 8280 TTV can be
machine with the perfect technology mix for professional farmers customized on all applications and adapted precisely to the customer’s
and contractors. It sets new standards in terms of operator’s comfort, requirements: from open field to transport, grassland operations to
acceleration on the road and dynamic driving behavior. Thanks to the all heavy field or industry requirements. The 8280 TTV is also the
powerful DEUTZ TTCD 6.1 double turbocharged engine the tractor perfect all-round tractor for modern contractors. The new design
generates more power already at lower rpms. And due to the light features introduced for the cabin ensure an unprecedented level
vehicle weight between 9,5 and 10,3 tonnes an unrivalled power of comfort, creating the ideal working environment for long hours
density of 33 kg/hp is reached. The high maximum permissible behind the wheel. The new smart farming technologies like SDF Fleet
weight of 16 tons, available @ 40, 50 and also 60 kph, also allows up Management or the SR20 receiver make the 8280 TTV the tractor
to 6.5 tons payload, which sets the benchmark in this cluster. for the future.

Dynamic Power. Reliability.

• 287 hp powerful double turbo engine • High-Tech made in Germany
• Compound TTV transmission with a top-speed of 60 kph • Technological solution for maximum efficiency,
• 16,000 kg gross vehicle weight easy servicing and highest reliability
• Dual Speed front PTO • 1000 h engine oil change interval
• Load Sensing hydraulic system (210 l/min) • Remote support for fastest service

Connectivity. Comfort.

• iMonitor with XTend, Section Control • Intelligent front axle suspension and air suspended cab
with 200 sections and AutoTurn function • Automatic air conditioning with additional air-outlets
• SR20 GNSS receiver including • New LED-package up to 23 LED lights
Skybridge for SDF Guidance • DAB+ radio with handsfree and Bluetooth
• Full integration of ISOBUS features including TIM • iTBM intelligent trailer brake system
• SDF Fleet Management for full control
of machine data

  MaxCom joystick and ergonomic hydraulic controls.   Innovative front axle suspension and dry disk brakes.

TRACTORS - 11
 7 SERIES TTV
Technical data
7230 7250
ENGINE DEUTZ
Emissions Stage V
Cylinders / Displacement n° / cm³ 6 / 6,057
Max. power (ECE R120) kW / hp 166 / 226 181 / 246
Power at rated engine speed (ECE R120) kW / hp 157 / 214 169 / 230
Max. lifting capacity kg 10,000
Wheelbase mm 2,868
Weight (min. / max.) kg 8,200 / 9,100

12 - TRACTORS
7 SERIES TTV.
Top German technology for top productivity.

The two 7 Series models deliver up to 246 hp and stand out for a range intuitive controls, a newly designed armrest, state-of-the-art SDF
of trademark German characteristics: high quality, high precision Smart Farming Solutions, enhanced with highly efficient engine and
and reliability combined with cutting-edge technology in terms of transmission technology. Innovative axles and brakes ensure optimal
both cost-effectiveness and comfort. The 7 Series represents the driving comfort and maximum safety. Furthermore, the hydraulic
culmination of highly innovative and intelligent tractor technology systems and lift capacity both front and rear, compliment the
manufactured at our new facility in Lauingen, Germany. 7 Series is overall 7 Series specification making this tractor the ideal partner for
offered with the exceptional comfort of the MaxiVision 2 cab, increasing productivity for contractors and agricultural businesses.

Features • Deutz 6.1 TCD, Stage V Common Rail, 6-cylinder, 24-valve, turbo-intercooled engine with
SCR exhaust gas post-treatment system and passive DPF
• TTV continuously variable transmission with 4 working ranges and
stepless speed control from 0 to 60 kph (where permitted)
• SenseClutch PowerShuttle with response modulation system with 5 settings
• Powerbrake servo-assisted braking system and automatic Electric Parking Brake (EPB)
• Electronically controlled hitch with radar and up to 3 PTO speeds (540ECO / 1000 / 1000ECO)
• Load Sensing hydraulic system with variable displacement pump of up to 160 l / min
• MaxiVision 2 with interior trims in hi-tech materials, maximum comfort with ergonomically
positioned controls
• Multifunction armrest with integral joystick for control of the main tractor functions
• iMonitor3 for various applications of SDF Guidance, SDF Data Management and ISOBUS

 Now new for all TTV models: seat with up to 23° rotation  The MaxCom armrest of the 7 Series TTV incorporates all the main controls and allows total manage-
for increased operating and work comfort. ment of the machine.

TRACTORS - 13
6 SERIES.
16 6 SERIES 6 CYLINDERS

18 6 SERIES 4 CYLINDERS

20 6120-6140 SERIES
 6 SERIES

Technical data 6155 6165 6175 6185 6205 6215

PS / PS / PS / PS / PS / PS /
TTV TTV TTV TTV TTV TTV
RCSHIFT RCSHIFT RCSHIFT RCSHIFT RCSHIFT RCSHIFT
ENGINE DEUTZ
Emissions Stage V
Cylinders / Displacement n° / cm³ 6 / 6,057
Max. power (ECE R120) kW / hp 114.9 / 156 120.8 / 164 129.5 / 176 138.5 / 188 134.3 / 183 152.3 / 207 149.1 / 203 156.2 / 212
Power at rated engine speed
kW / hp 109.5 / 149 115.1 / 157 124.4 / 169 133 / 181 129 / 176 144.4 / 196 135.7 / 185 147.6 / 201
(ECE R120)
Rear lift capacity kg 9,700 9,200 9,700 9,200 9,700 9,200 9,700 9,200 9,700 10,000 9,700 10,000
Wheelbase mm 2,767 2,848
Total unladen weight 7,200 / 7,830 / 7,200 / 7,830 / 7,200 / 7,980 / 7,200 / 8,200 / 7,930 / 8,400 / 7,930 / 8,400 /
kg
(min. / max.) 7,600 8,230 7,600 8,230 7,600 8,380 7,600 8,600 8,330 8,800 8,330 8,800

16 - TRACTORS
6 SERIES. 6 CYLINDERS.
The best technology mix in its class.

Whether it’s a large, medium or small enterprise, a contractor or a developed the new 6 Series Stage V with this in mind. With models
local authority, however diverse the profile, they all have one thing in ranging from 156 to 212 hp, two wheelbases, three transmission
common – they need to be successful. Accordingly, tractor technology variants, two cabin types with different comfort levels, and various
needs to 100 % match their working profile. Ploughing, sowing, other feature options, you can put together the best technology mix
cultivating, transporting, harvesting crops, front loader work – each in this tractor class, and create your own, totally individual tractor.
individual professional will decide how the tractor will be utilised, With the new 6 Series, DEUTZ-FAHR has redefined the configurability
along with which specific features are required. DEUTZ-FAHR has concept.

Features • Deutz TCD 6.1 Stage V, Common Rail, 6-cylinder, 24-valve, turbo-intercooled engine
•
•
Compact EAT with passive DPF and SCR
Full aluminium cooling system with exclusive opening system
• Powershift: very fine stepped multi-speed transmission, with 5 range x 6 Powershift steps
• RCshift: 54+27 full robotized transmission, with ultra- and super-eco engine speed at 40 / 50* kph
• TTV: continuously variable transmission with 4 working ranges
and ultimate stepless speed control from 0 to 50* kph
• Intelligent electronics transmission management, with InfoCentrePro interface
• External dry disc brakes, for unique braking performance
• Front adaptive suspension with automatic damping control
• Load Sensing hydraulic system with up to 170 l / min and up to 7 electronic proportional spool valves
• Integrated electronic front lift with two speed PTO
• MaxiVision Cab for maximum comfort and ergonomics
• Electronic System Management with iMonitor, ready for Farming 4.0
• 4th generation LED with exclusive front integrated lights and style

 State of the art dashboard with InfoCentrePro: 5" colour display and high resolution  Cab and bonnet are separated to reduce noise and vibration and increase comfort.
for a user-defined information concept at top level. Security thanks to code lock: lock
and unlock with PIN.

TRACTORS - 17
 6.4 SERIES
Technical data 6145.4 6155.4 6165.4 6175.4
PS / RCSHIFT PS / RCSHIFT TTV PS / RCSHIFT TTV PS / RCSHIFT TTV
ENGINE DEUTZ
Emissions Stage V
Cylinders / Displacement n° / cm³ 4 / 4,038
Max. power (ECE R120) kW / hp 105.9/144* 114.9 / 156 120.8 / 164 125.8 / 171
Power at rated engine speed (ECE R120) kW / hp 101.1 /137* 109.5 / 149 115.1 / 157 119.9 / 163
Rear lift capacity kg 6,200 9,700 9,200 9,700 9,200 9,700 9,200
Wheelbase mm 2,543
Total unladen weight (min. / max.) kg 76,570 /7,450 6,570 /7,450 7,680 /8,080 6,570 /7,450 7,680 /8,080 6,570 /7,450 7,680 /8,080

*ECE R24

18 - TRACTORS
6 SERIES. 4 CYLINDERS.
The best technology mix with 4 cylinders.

4 cylinder tractors are the best choice for many applications in transmission with robotised gear assemblies to the continuous
agriculture. DEUTZ-FAHR therefore presents the 6 Series with four TTV transmission. All reach their top speed of 50 kph (40 kph) with
4-cylinder models from 144 hp (105,9 kW) to 171 hp (125,8 kW). reduced engine speed, unique for the RCshift at only 1,530 rpm. You
The Deutz TCD 4.1 engines with state-of-the-art exhaust technology can also choose your level of cab comfort: the MaxiVision cab in
with emissions level Stage V have a more direct response, offer greater countless equipment variants, from mechanical-manual operation to
torque reserves and even have high-torque power at low engine electronic multi-functional levers, provides exactly your desired level
speeds. For the transmission technology, you have a choice: from of comfort.
a six-step Powershift transmission and the comfortable RCshift

Features • 4-cylinder models from 144 hp (105,9 kW) to 171 hp (125,8 kW)
• Deutz TCD 4.1 engines emissions level Stage V
• Six-step Powershift transmission or RCshift transmission
with robotised gear assemblies or continuous TTV transmission
• Top speed of 50 kph (40 kph) with reduced engine speed (RCshift at only 1,530 rpm)
• MaxiVision cab with mechanical-manual operation or electronic multi-functional levers

 Six-step Powershift transmission.   RCshift transmission with robotised gear assemblies.

TRACTORS - 19
 6120-6130-6140
Technical data 6120 6130 6140
PS TTV PS TTV PS TTV
ENGINE FARMotion DEUTZ
Emissions Stage IV
Cylinders / Displacement n° / cm³ 4 / 3.849 4 / 3.620
Max. power (ECE R120) kW / hp 93 / 126 100 / 136 100,1 / 136
Max. power with boost (ECE R120) kW / hp – 105 / 143
Bore / Stroke mm 103 / 115,5 98 / 120
Fuel tank capacity l 185
AdBlue tank capacity l 12

20 - TRACTORS
6 SERIES. 6120/6130/6140.
The best technology mix now even more compact.

DEUTZ-FAHR has expanded the series with six compact, four cylinder Ultra-efficient Deutz (6140) or FARMotion (6120 and 6130) engines
tractors in the low-horsepower category: the 6120, 6130 and 6140, (Stage IV) with an output from 126 to 143 hp (93 to 105 kW) ensure
each of which are available with TTV or Powershift transmissions. characteristically high performance and low fuel consumption. A
From ploughing, sowing and cultivating to transporting, harvesting variety of equipment options are available. The spacious cab provides
crops and front loader work – the 6 Series tractors are as versatile the high level of operating and driving comfort that DEUTZ-FAHR
as your daily work is varied. Maximum manoeuvrability, supreme has become known. With the six models in the range, DEUTZ-FAHR
efficiency and unparalleled operating comfort are trademark has added even more options to the technology mix. Businesses
features of the new 6 Series. The modern bonnet design, LED light looking for a compact model that offers a wide range of features as
package and 8" iMonitor in the cab all blend in seamlessly with the well as comfort and convenience are guaranteed to find a perfectly
complete model range. Like the existing 6 Series, the new, compact suitable all-round tractor that matches their work profile and
four-cylinder tractors come with powerful hydraulic systems as individual requirements.
well as a range of hydraulic attachment points at the front and rear.

Features • Electronically controlled four-cylinder Stage IV engines with Electronic Visco fan
• TTV or Powershift transmission (30+30 or 60+60 speed versions available)
• Four-wheel drive and differential lock (100 %) with electro-hydraulical engagement
• Suspended front axle
• Four-wheel braking system, and Hydraulic Parking Brake as standard
• Hydraulic engine brake available
• Three hydraulic packages with 22 equipment options
• Lifting capacity of 2,880 kg at the front and 7,000 kg at the rear
• Up to four PTO speeds, front and ground-speed PTO on request
• 33,600-lumen LED light package
• New MaxCom joystick (TTV models)
• 5" colour display on the new InfoCentrePro

 Dashboard cluster with new InfoCentrePro: 5" high-res LCD color display for  The new, highly ergonomic MaxCom joystick on the armrest controls everything.
customisable top information concept. Dedicated controls for driving speed, direction of travel, ComfortTip system and rear
lift controls. In addition: four freely programmable buttons for maximum flexibility.

TRACTORS - 21
5 SERIES.
24 5 SERIES

26 5G SERIES

28 5D TTV SERIES

30 5D SERIES - 5D ECOLINE SERIES

32 5D KEYLINE SERIES
 5 SERIES
Technical data
5105 5115 5125
ENGINE DEUTZ
Emissions Stage IV
Cylinders / Displacement n° / cm³ 4 / 3,620
Max. power (ECE R120) kW / hp 80.9 / 110 87.5 / 119 92.8 / 126
Power at rated engine speed (ECE R120) kW / hp 77 / 105 83 / 113 88 / 120
Max. lifting capacity kg 4,855 5,410
Wheelbase (4WD / 2WD) mm 2,370 / 2,330 2,370 2,370 / 2,330
Weight kg 4,150 4,500

24 - TRACTORS
5 SERIES.
Comfort in the utility class.

For efficient work with utility tractors, working, driving and operating Block suspension mounts. The gear shift lever has been redesigned
comfort are just as important as versatility. Only if a utility tractor as the gears are now easily selected using a Bowden cable design.
meets every aspect of the working profile can it be commercially An up to 40 % reduction in cab noise and vibrations is the result.
successful. Only if the level of comfort is right will the performance The new suspension on the front axle ensures greater driving comfort,
and motivation of drivers remain high for a long time. DEUTZ-FAHR safety and traction in all ground conditions. Whatever demands you
has developed the new 5 Series with this in mind. Three models with have of a utility tractor, DEUTZ-FAHR can meet them with state-
outputs of 110 to 126 hp stand out for superior comfort in addition of-the-art technology, a wide range of configuration options and
to their versatility and reliable German technology. The highly an extraordinary level of comfort. DEUTZ-FAHR offers the largest
comfortable cab is supported on the latest design of Hydro Silent- selection of utility tractor models.

Features • Deutz TCD 3.6 Stage IV common rail, 4-cylinder, turbo-intercooled engine with DOC + SCR
exhaust gas post-treatment system
• Powershift transmission up to 60 FWD / 60 REV speeds and a maximum speed
of 40 kph at economy engine speed
• SenseClutch PowerShuttle with 5-level response modulation and Stop&Go function
• 4-wheel disc braking, Hydraulic Parking Brake
• 4-speed PTO (540 / 540ECO / 1000 / 1000ECO) Ground speed PTO and front PTO
• 55 l, 60 l ECO or 90 l “on demand” hydraulic system
• Cab, mounted on Hydro Silent-Block: the utmost comfort and unrivalled style
• Flexible specification, to make every machine unique and the perfect
match for specific requirements
• New suspension on the front axle for more driving comfort, safety and grip

*As long as stock lasts.

 The front axle features a suspension for more driving comfort, safety and grip.  Two engine speed settings. Pre-programmed efficiency for routine operations.

TRACTORS - 25
 5G SERIES
Technical data 5110 G
5080 G 5090 G 5090 G PLUS 5090.4 G PLUS 5100 G 5110 G 5120 G
PLUS
ENGINE FARMotion
Emissions Stage III B Stage IV
Cylinders / Displacement n° / cm³ 3 / 2,887 4 / 3,849
Max. power (ECE R120) kW / hp 58 / 79 65 / 88 75 / 102 83 / 113 78 / 106 85 / 116
Power at rated engine speed (ECE R120) kW / hp 58 / 79 61.7 / 84 71.5 / 97 79 / 107 74 / 101 80,6 / 110
Max. lifting capacity kg 4,525 4,855 5,410
Wheelbase (4WD / 2WD) mm 2,300 / – 2,300 / 2,255 2,350 / – 2,400 / – 2,400 / 2,360 2,400 / –
Weight kg 3,600 3,900 4,220 4,320

26 - TRACTORS
5G SERIES.
Utility tractors that fit, because they adapt to meet your needs.

Arable farms, dairy farms, livestock farms, mixed farms, large farms cab guarantees ultimate working and operating comfort for all
and small farms, run as a main business or part-time – the range applications, while the FARMotion engines deliver maximum power
of applications for utility tractors is more diverse than ever before with minimal emissions. A 40 kph ECO transmission ensures the
in modern agriculture. Additionally, there is forestry work and right speeds for precise, efficient work. You can choose between a
municipal tasks. With the 5G Series now you will find a utility tractor mechanical reverse or a electro-hydraulic reverse Power­ Shuttle.
that perfectly suits your needs among the seven models with an output Impressive hydraulic power and lift capacity at the front and rear
of 79 hp to 116 hp with different wheelbases, different load capacities make the new 5G Series suitable for your application profile.
and weights and different tyre combinations. The specification Whatever your requirements, DEUTZ-FAHR can meet them with the
and technology of the 5G Series will also meet your needs. The largest range of utility tractor models.

Features • FARMotion common rail 3 or 4-cylinder, turbo-intercooled engine

• Transmission with a wide range of specification options: up to 60 speeds in each direction and
a maximum speed of 40 kph at economy engine speed
• SenseClutch PowerShuttle with 5-level response modulation and Stop&Go function
• 4-wheel disc braking
• 4-speed PTO (540 / 540ECO / 1000 / 1000ECO) Ground speed PTO and front PTO
• Lifting capacity of up to 4.525 / 5.410 kg depending on version
• 55 l, 60 l ECO or 90 l “on demand” hydraulic system
• 4-post cab, mounted on Hydro Silent-Block: unrivalled comfort
and optimised visibility for the front loader

 Front axle equipped with disk brakes.  FARMotion engine with SCR exhaust gas post-treatment system.

TRACTORS - 27
 5D TTV SERIES
Technical data
5090 5100 5090.4 5100.4 5110.4
ENGINE FARMotion
Emissions Stage III B
Cylinder / Displacement n°/cm3 3 / 2,887 4 / 3,849
Max. power (ECE R120) 65 / 88 71 / 97 65 / 88 75 / 102 83 / 113
Power at rated engine speed (ECE R120) kW / hp 61.5 / 83 67 / 91 61.8 / 84 71.5 / 97 79 / 107
Engine speed at maximum torque rpm 1,600
Max. lifting capacity kg 4,310 (with Standard lift) / 3,660 (with Compact lift)
Wheelbase mm 2,141 2,271
Weight with cab kg 3,958 4,058

28 - TRACTORS
5D TTV SERIES.
Reaching new heights.

Whatever your challenge, the new 5D TTV turns it into a flow hydraulics and the compact overall shape allows optimal use of
great experience. Equipped with the latest technology from the tractor also in orchards and vineyards. Whatever the application,
DEUTZ-FAHR it takes performance and comfort to the next level. TTV Transmission, MaxCom armrest and independent front axle
With TTV transmission, a suspended cab and suspended front axle suspension allow working in efficient and comfortable way.
even long working days feel short. Thanks to its quality components, From vine or orchard growing to cattle breeding, if you are asking for
it is a reliable, long-lasting tractor and thus, a great investment in the performances and comfort, 5D TTV is the right choice for your farm.
future of your business. Last but not least, the 4-wheel braking system, HPB, Cat.4-compliant
Powerful FARMotion engines and and a high rear lift capacity make cab always guarantee safety under every working condition.
these tractors suitable for open field and farm applications. High

Flexibility. Comfort.

• 3 or 4-cylinders engine availability • TTV transmission with PowerZero function
• Double choice of rear three­point hitch: • Independent front axle suspension
Standard or Compact • MaxCom armrest integrated to the seat
• Fully customizable front and rear hydraulics • Comfortip headland management
• From 1.75 to 2.2 m overall width • Cab suspended on Hydro Silent-Blocks
• Municipal equipment availability

Performance. Safety.

• FARMotion engine (up to 113 hp) • Cab with Category 4 filtration
• Powerful hydraulics with Load Sensing pump • Hydraulic Parking Brake (HPB)
• High front lift capacity (2880 kg) • 4-wheel brakes
• High rear lift capacity (up to 4310 kg)
• SDF Smart Farming Solutions integration

  Intuitive MaxCom joystick.    Independent front axle suspension.

TRACTORS - 29
 5D SERIES
Technical data 5070 D 5080 D 5090 D 5090 .4 D
5080 D 5090 D 5090.4 D 5100.4 D
ECOLINE ECOLINE ECOLINE ECOLINE
ENGINE FARMotion
Emissions Stage III B
Cylinders / Displacement n° / cm³ 3 / 2,887 4 / 3,849
Max. power (ECE R120) kW / hp 48 / 65 58 / 79 65 / 88 75 / 102
Power at rated engine speed (ECE R120) kW / hp 48 / 65 58 / 79 61.7 / 84 71.5 / 97
Max. lifting capacity kg 2,650 / 3,600
Wheelbase mm 2,100
Weight kg 3,230

30 - TRACTORS
5D SERIES / 5D ECOLINE SERIES.
As versatile as your work.

Do you work on a farm? Expanses of fields? Grassland, forests or weight and a new bonnet design. No other tractor series offers the
parks? Agricultural or municipal ground? Do you want a tractor that same quality, reliability and comfort with a larger range of models
is fully tailored to suit your applications and financial situation? Then and features. From the basic Ecoline version to high-tech models,
consider the 5D Series from DEUTZ-FAHR. Compact with a low kerb the most innovative technology comes as standard.

Features • FARMotion Stage IIIB common rail 3 or 4-cylinder, turbo-intercooled engine with
DOC exhaust gas post-treatment system with electronic engine management
• 45 FWD + 45 REV Powershift transmission with Overspeed
• SenseClutch PowerShuttle with 5-level response modulation and Stop&Go function
• 4-wheel disc braking with multiple wet discs
• 3-speed PTO (540 / 540ECO / 1000), ground speed PTO and front PTO
• Electrohydraulically operated 4-wheel drive, PTO and differential locks (LS and GS)
• 42 l / min hydraulic system (Ecoline versions) or 54 l / min hydraulic system (LS and GS) versions
• Also available in an Ecoline version (mechanical transmission,
mechanical engagement of 4WD, Diff. Lock and PTO)

 The 5D Ecoline with mechanical engagements of 4-wheel drive,  On request, the 5D models can be equipped with the new Sauter front linkage.
PTO and differential locks.

TRACTORS - 31
  Compact radiator with Visco fan and PowerCore air
filter for maximum engine efficiency.

 Cabin comfort. 360-degree all-round visibility, highly

ergonomic operation and choice of two roof options.

5D KEYLINE SERIES.
Simply work more economically.

The new 5D Keyline Series models are simply ideal for smaller and 1,870 rpm. Simply versatile: 50 l / min hydraulic pump, rear power lift
part-time farms. Simply impressive technology: three-cylinder with 3,500 kg lifting capacity and up to three PTO speeds. Simply
FARMotion Common Rail engines, compact radiator with Visco fan comfortable cabin. The new 5D Keyline Series models are the right
and PowerCore air filter, mechanical five-speed reversing gearbox choice for anybody wanting to work simply economically.
with 15+15 or 30+15 gears. Simply efficient: 40 kph at as low as

Features • FARMotion engines with electronic 2,000 bar common rail, exhaust recirculation and DOC
• Compact radiator with Visco fan and PowerCore air filter
• Mechanical gearbox up to 30+15 gear
• 40 kph maximum speed at 1,870 rpm
• Electrohydraulic engagement for 4WD and differential lock. 4 wheel braking system
• 55-degree steering angle
• 540 / 540ECO / 1000 PTO

5D KEYLINE SERIES
Technical data
5070 D KEYLINE 5080 D KEYLINE 5090 D KEYLINE 5100 D KEYLINE
ENGINE FARMotion
Emissions Stage III B
Cylinders / Displacement n° / cm³ 3 / 2,887
Max. power (ECE R120) kW / hp 48 / 65 58 / 79 65 / 88 71 / 97
Power at rated engine speed (ECE R120) kW / hp 48 / 65 58 / 79 61.6 / 84 67.3 / 92
Max. lifting capacity kg 2,500 / 3,500
Wheelbase mm 2,100
Weight kg 3,230

32 - TRACTORS
  The digital display delivers all relevant tractor
information at a glance.

 The operator platform laid out in a logical and

user-friendly manner.

4E SERIES.
The multi-tasking tractor.

The 4E Series consists of four models from 65 hp (48 kW) to 97 hp cooling system is larger and more efficient than on the previous
(71 kW) with two different equipment packages, depending on model. Thanks to the four different configurations of PTO speeds, the
the transmission (fully mechanical with max. speed 30 or 40 kph). new 4E Series is a multi-role tractor capable of catering for a wide
The FARMotion 3-cyl. Stage III B engines deliver constant power range of applications.
and torque curves even at low crankshaft speeds. The redesigned

Features • FARMotion Stage III B 3-cyl. engines with turbo intercooler and Common Rail
• 4 transmission configurations: 12+3, 8+8 ECO, 15+15 and 15+15 ECO
• 4WD front axle: 2200 kg admissible load and 55° steering angle
• 4 PTO configurations: 540, 540 / 540E, 540 / 540E / 1000 and 540 / 540E + ground speed PTO
• Hydraulic system with 42 or 50 l / min open center and min. 1 / max. 3 rear outlets with
mechanical controls

4E SERIES
Technical data
4070 E 4080 E 4090 E 4100 E
ENGINE FARMotion
Emissions Stage III B
Cylinders / Displacement n° / cm³ 3 / 2,887
Max. power (ECE R120) kW / hp 48 / 65 58 / 79 65 / 88 71 / 97
Power at rated engine speed (ECE R120) kW / hp 48 / 65 58 / 79 61.6 / 84 67.3 / 92
Max. lifting capacity kg 3,500
Wheelbase (4WD / 2WD) mm 2,100 / 2,166 2,100 / –
Weight (4WD / 2WD) kg 3,000 / 2,800 3,000 / –

TRACTORS - 33
WARRIOR.
The Warrior models.

In brilliant black or original DEUTZ-FAHR green, the DEUTZ-FAHR design, superior comfort in work, driving and managing implements,
Warrior edition is designed for farmers and contractors who make and individual special equipment. Warrior is more than a name
the highest demands on themselves and their technology. For for a high-performance tractor. Warrior is an expression of the
perfectionists who make no compromises, who do their utmost character of whoever uses this machine at work. Driving a Warrior
every day and never give up, even when conditions are tough. makes a statement: “I can do anything.” The Warrior is available for
For individualists who want to stand out from the crowd and the 6 series, 7250 TTV and 9340 TTV. The 7250 TTV is from now
demonstrate their uncompromising attitude to the outside world. on also available in the new DEUTZ-FAHR Java green. Each market
DEUTZ-FAHR has set a new benchmark in terms of technology, determines the equipment individually.

34 - TRACTORS
   Warrior roof LED lights as standard.

 Exhaust with stainless steel trim.

 Warrior front LED lights and brilliant black finish.

Features*

• Exhaust with stainless steel trim

• Warrior front LED lights and brilliant black finish
• Warrior roof LED lights as standard
• Warrior front / rear cab LED lights, optional
• Warrior comfort seat
• Automatic climate control
• Warrior black floor mat
• Double-glazed rear glass
• LED lighting for external controls

*Availability depends on the market and model  Warrior comfort seat.

TRACTORS - 35
SPECIALISE
SED.
38 5DF / DS / DV TTV SERIES

40 5DF / DS / DV SERIES

42 5DF ECOLINE SERIES

43 AGROPLUS F KEYLINE

44 3 SERIES

45 5G TB SERIES
 Technical Data

5 DF TTV SERIES 5090 DF TTV 5100 DF TTV 5090.4 DF TTV 5105 DF TTV 5115 DF TTV
ENGINE FARMotion
Emissions Stage III B
Cylinders / Displacement n° / cm³ 3 / 2,887 4 / 3,849
Max. power (ECE R120) kW / hp 65 / 88 71 / 97 65 / 88 75 / 102 83 / 113
Power at rated speed (2,000 / 25 / CE) kW / hp 61.5 / 83 67 / 91 61.8 / 84 71.5 / 97 79 / 107
Max. lifting capacity kg 3,800
Overall rear width (min. / max.) mm 1,441 / 1,632
Weight with cab kg 3,187 / 3,780 3,415 / 4,008

5 DS TTV SERIES 5090 DS TTV 5100 DS TTV 5090.4 DS TTV 5105 DS TTV 5115 DS TTV
ENGINE FARMotion
Emissions Stage III B
Cylinders / Displacement n° / cm³ 3 / 2,887 4 / 3,849
Max. power (ECE R120) kW / hp 65 / 88 71 / 97 65 / 88 75 / 102 83 / 113
Power at rated speed (2,000 / 25 / CE) kW / hp 61.5 / 83 67 / 91 61.8 / 84 71.5 / 97 79 / 107
Max. lifting capacity kg 2,600
Overall rear width (min. / max.) mm 1,267 / 1,517
Weight with cab kg 3,165 / 3,768 3,218 / 3,821

5 DV TTV SERIES 5090 DV TTV 5100 DV TTV 5090.4 DV TTV 5105 DV TTV 5115 DV TTV
ENGINE FARMotion
Emissions Stage III B
Cylinders / Displacement n° / cm³ 3 / 2,887 4 / 3,849
Max. power (ECE R120) kW / hp 65 / 88 71 / 97 65 / 88 75 / 102 83 / 113
Power at rated speed (2,000 / 25 / CE) kW / hp 61.5 / 83 67 / 91 61.8 / 84 71.5 / 97 79 / 107
Max. lifting capacity kg 2,600
Overall rear width (min. / max.) mm 1,077 / 1,293
Weight with cab kg 3,081 / 3,590 3,134 / 3,643

38 - TRACTORS
5DF / DS / DV TTV SERIES.
Maximum technology and ergonomics in a small space.

Never before have performance, productivity and comfort been Series can be used and configured individually and flexibly so suit the
united in a specialist tractor as perfectly as in the new 5 DF/DS/DV TTV variety of tasks in orchards and vineyards. Individual equipment and
Series. DEUTZ-FAHR presents a new, innovative specialist tractor for hydraulic packages can be configured depending on the application
the highest requirements: continuous TTV transmission, maximum and tasks. All have one thing in common – relieving the driver so they
driving and operating comfort, and a powerful hydraulic system can focus fully on their work.
ensure an unprecedented level of productivity. The 5 DF/DS/DV TTV

Features • FARMotion Stage IIIB engines, 3 and 4 cylinders, 2,000 bar Common Rail,
turbo intercooler, cooling system with e-Visco fan
• Continuously variable transmission SDF T3500 CVT transmission with
two automatic speed ranges (work / transport)
• 3 driving strategies (AUTO / PTO / MANUAL)
• Maximum speed: 40 kph at eco engine speed
• 3 speeds PTO (540 / 540E / 1,000) with ground speed PTO availability
• Hydraulic system with Load Sensing pump with real 100 l / min
• Up to 9 independent electro-hydraulic distributors
• Electronic rear hitch with maximum lifting capacity up to 3,800 kg
• Independent front axle suspension
• Minimum turning radius 3 m and SDD fast steering system availability
• Full braking with brakes on all 4 wheels and Hydraulic Parking Brake (HPB)
• 4 Pillar cab with completely flat floor and multi functional armrest
MaxCom with ergonomical layout
• Hydro Silent-Block cab suspension
• Pressurized cab with Cat. 4 filtration system

 The MaxCom armrest with ergonomical joystick and clearly colour coded functions.  Spacious 4 pillar cab with completely flat floor thanks to the
compact low-lying TTV transmission.

 Independent front axle suspension.   Four-wheel steering for the smallest turning radius.

TRACTORS - 39
 Technical Data

5 DF SERIES 5080 DF 5090 DF 5100 DF 5090.4 DF 5105 DF 5115 DF

ENGINE FARMotion
Emissions Stage III B
Cylinders / Displacement n° / cm³ 3 / 2,887 4 / 3,849
Max. power (ECE R120) kW / hp 58 / 79 65 / 88 71 / 97 65 / 88 75 / 102 83 / 113
Power at rated engine speed (ECE R120) kW / hp 58 / 79 61.5 / 83 67 / 91 61.8 / 84 71.5 / 97 79 / 107
Rear lift capacity kg 2,800
Overall rear width (min. / max.) mm 1,454 / 1,642
Total unladen weight (Cab) (min. / max.) kg 2,617 / 2,995 2,747 / 3,125

5 DS SERIES 5080 DS 5090 DS 5100 DS 5090.4 DS 5105 DS 5115 DS

ENGINE FARMotion
Emissions Stage III B
Cylinders / Displacement n° / cm³ 3 / 2,887 4 / 3,849
Max. power (ECE R120) kW / hp 58 / 79 65 / 88 71 / 97 65 / 88 75 / 102 83 / 113
Power at rated engine speed (ECE R120) kW / hp 58 / 79 61.5 / 83 67 / 91 61.8 / 84 71.5 / 97 79 / 107
Rear lift capacity kg 2,600
Overall rear width (min. / max.) mm 1,264 / 1,517
Total unladen weight (Cab) (min. / max.) kg 2,688 / 3,020 2,808 / 3,140

5 DV SERIES 5080 DV 5090 DV 5100 DV 5090.4 DV 5105 DV 5115 DV

ENGINE FARMotion
Emissions Stage III B
Cylinders / Displacement n° / cm³ 3 / 2,887 4 / 3,849
Max. power (ECE R120) kW / hp 58 / 79 65 / 88 71 / 97 65 / 88 75 / 102 83 / 113
Power at rated engine speed (ECE R120) kW / hp 58 / 79 61.5 / 83 67 / 91 61.8 / 84 71.5 / 97 79 / 107
Rear lift capacity kg 2,600
Overall rear width (min. / max.) mm 1,163 / 1,293
Total unladen weight (Cab) (min. / max.) kg 2,709 / 2,950 2,829 / 3,070

40 - TRACTORS
5DF / DS / DV SERIES.
Huge performance in narrow places.

The 5 DF/DS/DV series are designed mainly for use in narrow Independent wheel suspension with a double wishbone design allows
orchards and vineyards. They are equipped with new FARMotion each front wheel to move vertically to a different extent. This results
engines and come as 3 or 4 cylinder versions. The 5DS offers a in maximum suspension in all operating scenarios. The spring stroke
maximum lifting capacity of 2,600 kg and two versions of cabin and of each wheel is controlled by an adaptive electro-hydraulic system,
platform: 28" high and 20" low (with lower mudguards and different ensuring that the wheel contact patch always touches the ground
ground clearance). As for the “narrow” version, minimum overall rear fully. The differential traction control (DTC) system constantly
width of 116 cm (depending on tyres), the 5DV is capable of working monitors wheel revolutions and always applies torque to the wheels
in the most tightly packed rows. The new DEUTZ-FAHR front axle during maximum ground contact.
concept is unique for specialist tractors, making it a real highlight.

Features • FARMotion Stage III B common rail 3 or 4-cylinder, turbo-intercooled engine

with DOC exhaust gas after treatment system
• 5-speed transmission with 3-speed Powershift and 3 ranges. 45 FWD + 45 REV in total
• Overspeed transmission for a maximum speed of 40 kph in economy mode
• PowerShuttle and Stop&Go
• Hydraulic 4-wheel braking
• Electrohydraulically operated 4-wheel drive, PTO and differential locks.
Auto 4WD: automatic4-wheel drive engagement
• 3-speed hydraulic PTO (540 / 540ECO / 1000) and ground speed PTO
• 3-levels hydraulic system: High-Flow, Power-Flow, Setting-Flow with electronic joystick,
oil flow up to 131 l / min and up to 9 separate spool valves (front and rear)
• Axle steering angle of 60°

 InfoCentre: all tractor functions clearly in view. Maximum ease of use thanks to the  Independent front axle suspension.
power shuttle with steering-wheel-mounted lever.

 Front attachment points. Equipped for every application.  With Stop&Go, you can control the tractor’s movement by only using the brake
pedals, without even touching the clutch pedal.

TRACTORS - 41
  3-speed PTO (540 / 540ECO / 1000) and ground
speed PTO for all kinds of applications.

 The operator driving position is logical and comforta-

ble, and the gear levers are located on the right-hand
side of the seat so that the operator can get on and
off the platform unimpeded.

5DF ECOLINE SERIES.

The choice to bear fruit.

For farms specialised on orchards or gardens and green houses the cooling efficiency regarding de-heating and air flow. For best safety
new 5DF Ecoline tractors are the most rational choice. With their also in slopy conditions the 5DF Ecoline features 4 wheel brakes, for
lower consumption and higher performance (more power and more maximum precise braking separate brakes in the front axle. The lifting
torque value), 3 or 4 cylinders and a very compact design, they allow capacity is 2,800 kg and the overall operation of the tractor highly
a more progressive use. Air filters with PowerCore technology ensure ergonomical.
better efficiency and duration, the functional design allows a better

• FARMotion Stage III B Common Rail 3 or 4-cylinder, turbo-intercooled engine

Features with DOC exhaust gas after treatment system
• Less fuel consumption for more engine power and torque
• Engine speed programming at the touch of a button
• 40 kph ECO with reduced engine speed
• 60° maximum steering angle

5 DF ECOLINE SERIES
Technical data
5080 DF 5080.4 DF 5090 DF 5090.4 DF 5100 DF 5105 DF
ECOLINE ECOLINE ECOLINE ECOLINE ECOLINE ECOLINE
ENGINE FARMotion
Emissions Stage III B
Cylinders / Displacement n° / cm³ 3 / 2,887 4 / 3,849 3 / 2,887 4 / 3,849 3 / 2,887 4 / 3,849
Max. power (ECE R120) kW / hp 58 / 79 65 / 88 71 / 97 75 / 102
Power at rated engine speed (ECE R120) kW / hp 58 / 79 61,5 / 83 61,8 / 84 67 / 91 71,5 / 97
Max. lifting capacity kg 2,600 2,800 2,600 2,800 2,600 2,800
Wheelbase mm 2,011 2,141 2,011 2,141 2,011 2,141
Width (min. / max.) mm 1,466 / 1,866 1,450 / 1,944 1597 / 1997 1,584 / 1,984 1,597 / 1,997 1,624 / 2,024
Weight kg 2,620 2,770 2,620 2,770 2,630 2,770

42 - TRACTORS
  Fitted with up to 3 mechanical control valves.

 Compact dimensions combined with the highest

lifting capacity within this sector.

AGROPLUS F KEYLINE.
The specialist par excellence.

The Agroplus F Keyline combines simplicity and strength, in a 4 cylinders are designed specifically for agricultural tasks, i.e. they are
compact, multi-function line­up from 65 to 79 hp. Fully synchronised high-performing, reliable, compact and with minimal maintenance
transmissions offer greater working comfort and shorter operating requirements. Like the entire DEUTZ-FAHR range the Agroplus F
times, guaranteeing new levels of productivity in this market Keyline features latest-generation technology, ergonomic controls
segment. The Agroplus F Keyline is perfect for specialist crops and and a streamlined design. All models are available with platform and
day-to-day jobs. The FARMotion engines (Stage III B) with 3 or 2 post safety frame foldable.

Features • FARMotion engines (Stage III B), 3 or 4 cylinders, turbo intercooler, EGR and DOC
• Fully mechanical transmission in 4 configurations:
8+8, 10+10, 15+15 or 30+15 (40 kph maximum speed)
• 4-wheel braking with multiple wet discs
• 2 PTO configurations (540 or 540 / 540ECO) and ground speed PTO
• Maximum lifting capacity: 3,050 kg

AGROPLUS F KEYLINE
Technical data
70 F KEYLINE 80 F KEYLINE 80.4 F KEYLINE
ENGINE FARMotion
Emissions Stage III B
Cylinders / Displacement n° / cm³ 3 / 2,887 3 / 2,887 4 / 3,849
Max. power (ECE R120) kW / hp 48 / 65 58 / 79
Max. lifting capacity kg 3,050
Wheelbase mm 1,996 1,996 2,126
Minimum width mm 1,325 1,325 1,450
Weight kg 2,200 2,200 2,300

TRACTORS - 43
   Highest comfort also with platform.

  Ergonomic arrangement of the gear levers.

3 SERIES.
Small size, unlimited possibilities.

Its versatility makes the new Series 3 a real all-rounder. Be it in year-round use in city and municipal administrations. Applications
combination with mounted or towed implements – no task is in greenhouses, tree nurseries or transport work are just some
too demanding for the new Series 3. This compact DEUTZ-FAHR of the areas in which the tractor has proven itself. Compared to
tractor is anything but small when it comes to reliably carrying out specialised tractors with similar power, Series 3 tractors are lighter.
a wide range of tasks for companies in gardening and landscaping This means less soil compaction and less turf damage. They have an
and for local authorities. There is always something to do for this exceptionally low power-to-weight ratio thanks to their light weight
tractor, whether it is the maintenance of public and private lawns or and powerful engines.

• Three models from 50 to 60 hp and 2 different platforms

Features •
•
Perkins Stage V engine
Great weight-to-horsepower ratio
•
•
Powerful Hydraulics
Multispeed rear PTO
• Compact dimensions and low maintenance DPF

3 SERIES
Technical data
3050 NARROW 3050 3060
ENGINE Perkins
Emissions Stage V
Cylinder / Displacement n°/cm3 4 / 2,216
Power at rated engine speed (ECE R120) kW/hp 38 / 51 43.5 / 59
Max. power (ECE R120) kW/hp 38 / 51 43.5 / 59
Fuel tank capacity (std) litres 40
Rear lift capacity kg 1,200
Width mm 1,324 1,389
Total unladen weight - ROPS kg 1,385 1,500 1,575
Total unladen weight - cab kg – 1,810 1,885

44 - TRACTORS
  PowerShuttle with Stop&Go system.

 Transmission, rear lift and spool valves controls.

5G TB SERIES.
A sturdy tractor for heavy work.

The 5G TB Series Stage III B with new appealing features consists with FARMotion 4 cylinder engines, designed specifically for use
of two models in two variants, offering unique characteristics in agriculture, i.e. performing, reliable, compact and with minimal
unmatched by any other product in their segment. The range has maintenance requirements. The transmissions are available as
also been completely restyled. The most noticeable feature is the mechanical or Hi-Lo versions and equippable with mechanical shuttle
one-piece tiltable bonnet – an attractive modern styling to enhance (LS) or hydraulic power shuttle (GS). All 5G TB Series models are
both design and functionality. The new 5G TB Series are equipped fitted with 4-wheel braking with multiple wet discs.

• FARMotion 4-cylinder Stage III B engine with EGR and DOC

• 5-speed transmission with Hi-Lo: up to 40 speeds in each direction
Features and a maximum speed of 40 kph ECO
• PowerShuttle with Stop&Go function
• 4-wheel braking with multiple wet discs
• 4-speed PTO (540 / 540ECO / 1000 / 1000ECO) Ground speed PTO optionally available
• 55 l / min hydraulic system, lifting capacity of up to 4525 kg
• Admissible load: 6,200 kg

5G TB SERIES
Technical data
5105 G TB 5115 G TB
ENGINE FARMotion
Emissions Stage III B
Cylinders / Displacement n° / cm³ 4 / 3,849
Max. power (ECE R120) kW / hp 75 / 102 83 / 113
Power at rated engine speed (ECE R120) kW / hp 71,5 / 97 79 / 107
Max. lifting capacity kg 4,525
Wheelbase mm 2,400
Weight with ROPS
kg 3,300 / 3,600
(min. / max., depending on tyres)

TRACTORS - 45
CRAWLER
RS.
48 5KF / 5KM SERIES

49 5K SERIES
  The multifunctional character of the 5KF and 5KM
Series are also backed up by its exceptionally robust
chassis.

5KF / 5KM SERIES.
Full pulling power for inter-row cultivation or mountain.

The 5KF Series are designed for specialist inter-row cultivation, with equipped with wider tracks when needed. The 5KM Series, thanks to
its compact structure, and narrow track chains, which keep the a low center of gravity and a wide of 1,800 mm is a perfect tractor for
overall width of the machine under 1460 mm; but it is also designed the mountain territory.
for general purposes, because it is built for strength and can be

Features • FARMotion Stage III B, 3 or 4-cylinder turbo-intercooled engines with electronic engine
management system
• 16 FWD + 16 REV transmission with overdrive or 12 FWD + 12 REV with creeper
and synchronised shuttle
• Oil-immersed band steering brakes with hydraulic servo control
• 2-speed PTO with oil-immersed multiplate clutch (540 / 540ECO)
• Open-centre hydraulic system available with 50 l / min pump and up to 12-auxiliary valve
couplings with flow control. Dedicated 25 l / min steering pump
• Comfortable operator position on platform mounted on Silent-Blocks
• ComfortTrack (optional): Smooth driving with rubber tracks.

5KF SERIES 5KM SERIES

Technical data
5090 KF 5100 KF 5105 KM 5115 KM
ENGINE FARMotion
Emissions Stage III B
Cylinders / Displacement n° / cm³ 3 / 2,887 4 / 3,849
Max. power (ECE R120) kW / hp 65 / 88 71 / 97 75 / 102 83 / 113
Max. lifiting capacity kg 2,800
Wheelbase mm 1,650 1,850
Width (min. / max.) mm 1,360 / 1,750 1,460 / 1,800 1,800 1,800
Footprint (min. / max.) cm2 10,230 / 13,200 11,880 / 14,850 16,650 16,650
Weight with ROPS kg 4,260 4,310 5,080 5,080

48 - TRACTORS
   FARMotion stage III B engine, 4 cylinder, 113 Hp

  Six rollers for maximum pulling power and first-rate stability.

5K SERIES.
For the most demanding jobs on hilly terrain.

Sturdy and designed to withstand heavy loads, 5115 K is ideal for conditions on hilly and sloping terrain. The wheel base of 1,850 mm
the most demanding open-field jobs, where high performance, and innovative undercarriage with 6 heavy duty track rollers ensure
outstanding comfort and structural strength really come into greater stability and increased drawbar pulling power.
their own. It is designed to give maximum performance in difficult

Features • FARMotion Stage III B, 4-cylinder turbo-intercooled engines

with electronic engine management system
• 16 FWD + 16 REV transmission with overdrive or 12 FWD + 12 REV
with creeper and synchronised shuttle
• Oil-immersed band steering brakes with hydraulic servo control
• PTO with oil-immersed multiplate clutch and 2 speeds (540 / 540ECO or 540 / 1000)
• Open-centre hydraulic system available with 50l / min pump and up to 10-auxiliary valve couplings with
flow control. Dedicated 25 l / min steering pump
• Operator position on flat platform mounted on Silent-Blocks
• Lubricated track chains with 6 rollers per track, providing a generous footprint area

5K SERIES
Technical data
5115 K
ENGINE FARMotion
Emissions Stage III B
Cylinders / Displacement n° / cm³ 4 / 3,849
Max. power (ECE R120) kW / hp 83 / 113
Max. lifiting capacity kg 2,800
Wheelbase mm 1,850
Width mm 1,800
Footprint cm2 16,650
Weight with ROPS kg 5,260

TRACTORS - 49
FRONT LOADERS.
Scooping, gripping or
loading – our DEUTZ-FAHR
front loaders offer the perfect
solution for any task. Whether
on the farm, in the yard, the
forest or the garden.

50 - FRONT LOADER
FRONT LOADERS.
A wide range of loaders and attachments.

DEUTZ-FAHR’s front loaders are designed specifically for the 65 to
180 hp range of tractors. As well as a solid, robust structure, they
offer a wide selection of attachments for carrying out a full range Features
of agricultural handling and storage tasks to perfection. With
DEUTZ-FAHR front loaders the strain on the tractor is significantly

reduced. Thanks to technical know-how the implement is in an ideal
position to have less impact on the front axle. The loader is designed • Rugged and durable: Profiline Front Loaders
for maximum implement loading capacity and no trickle losses, made of fine grain steel.
with a maximum tilting angle, on the ground between 40° and 46°, • Mechanical level control system,
raised up to 69°. Thanks to the Z-kinematics the driver profits from Return-to-Level optional
the best view and maximum performance. Moreover, he can drive • Maximum loading height up to 4.81 m
smoothly even on bumpy terrain with the “Comfort-Drive” damping • The loader and its supports do not impede
system that reduces the shocks on loader and implement. Mounting, access to maintenance points
dismounting and maintenance works are quick and easy jobs, as • Rapid “QuickFix” attachment system optionally
well as using the wing with all kinds of implements. With the unique available for rapid and straightforward attachment
“Return-to-Level” feature the implement returns to a predefined of the front loader and related connections
optimum position just at the touch of a button. • High lifting force over the entire lifting cycle
• Simple and high-precision control by means of
joysticks or controls on a single lever
• The ComfortDrive function protects the operator
and attachments from extreme vibrations

PROFILINE

Technical data 8 10 20 30 40 45 50 60

8.1 10.1 20.1 30.1 40.1 45.1 50.1 60.1 80.1 100
TYPE FZ FS FZ FS FZ FS FZ FS FS FZ FZ FZ FZ FZ
Suitable for tractors with kw 35 / 65 50 / 75 50 / 80 65 / 90 65 / 105 90 / 130 110 / 170 130 / 200 >184
kW / hp performance hp 50 / 90 70 / 100 70 / 110 90 / 120 90 / 140 120/180 150/230 180/270 >250

Lifting force in the tool pivot bottom daN 1,960 2,020 2,490 2,260 2,590 2,616 2,750 2,880 3,020 3,500
point top daN 1,510 1,860 1,730 1,990 2,010 2,240 2,470 2,590 3,000

Lifting force (bucket) bottom daN 1,960 1,650 2,020 1,720 2,490 2,130 2,260 1,950 2,240 2,590 2,750 2,880 3,020 3,500
300 mm in front of pivot top daN 1,510 1,250 1,510 1,260 1,860 1,560 1,730 1,470 1,690 1,990 2,240 2,470 2,590 3,000

SOLIDLINE / COMPACTLINE
Technical data
655 755 / 755.1 855 / 855.1 955 / 955.1 FC 150 FC 250 FC 350 FC 450 FC 550
TYPE P H P H P H P H P H P H P H P H P H
Suitable for tractors with kw 35 / 50 40 / 60 50 / 80 55 / 90 11 / 18 15 / 26 18 / 37 26 / 40 29 / 44
kW / hp performance hp 45 / 65 55 / 80 65 / 100 75 / 120 15 / 25 20 / 35 25 / 50 35 / 55 40 / 60

Lifting force in the tool bottom daN 1,480 1,720 1,860 2,170 1,990 2,300 435 640 950 970 1,170
pivot point top daN 1,160 1,210 1,340 1,570 1,460 1,690 350 540 790 920 1,120

Lifting force (bucket) bottom daN 1,480 1,240 1,720 1,450 1,860 1,990 390 335 570 510 850 760 870 800 1,050 980
300 mm in front of pivot top daN 1,160 950 1,210 1,000 1,340 1,010 1,460 1,420 310 265 480 420 710 630 820 740 1,010 910

Overview front loader programme PROFILINE, SOLIDLINE, COMPACTLINE

52 - FRONT LOADER
 The structural design of the front loader ensures outstanding manoeuvrability,  The Light Kit or Ready Kit for front loading? The choice is yours.
different roof designs an optimal visibility upwards.

 Depending on the tractor model, front loader joystick with Powershift buttons.  ... controls for front loader operation are fully integrated and easy to reach.
Stop&Go, SDD rapid steering system and all...

FRONT LOADER - 53
CITYLINE.
All-round tractor for your
individual working profile
and your individual comfort
requirements.

CITYLINE - 55
CITYLINE.
DEUTZ-FAHR municipal tractors designed
for perfect functionality, all year round.

Road and site maintenance, winter service, transport and front loader innovation. Making it easy for you to stay ahead of your workload.
work, municipal construction, forestry work – the range of tasks and DEUTZ-FAHR offers you a comprehensive range of communal
requirements in the municipal sector are as varied and challenging tractors. There are numerous models delivering anything between 90
as municipalities themselves. At the same time, all tasks need to and 250 hp, with 3, 4 or 6 cylinders. Technical equipment extends
be carried out professionally and highly productively. Economic from eco to high-tech and there is enormous scope for configuration
efficiency throughout the year is the decisive factor. This is the and plentiful equipment options. The attachment areas of the seven
perfect situation for DEUTZ-FAHR’s municipal tractors, because different highly professional series are designed to accommodate a
every one of them is extremely versatile, flexible and can be used all wide variety of machines and equipment combinations. This allows
year round. Depending on the range of tasks, DEUTZ-FAHR municipal each individual tractor to be perfectly adapted and equipped for your
tractors fulfil the most diverse requirements in terms of efficiency individual needs.Municipal equipment with orange body colour is
and productivity. This is because DEUTZ-FAHR combines decades available for the models: 5D TTV, 5G, 5, 6, 6 TTV, 7 TTV, 5DF/DS/
of experience in the municipal sector with continuous technological DV TTV.

 Grass and tree cutting, street cleaning, snow clearing – your daily municipal work includes many tasks.

56 - CITYLINE
  The Series 5D TTV tractors offer maximum productivity.  Utility tractors that fit in, because they fit your needs: the 5G Series.

 Series 5DF/DS/DV TTV. Optimum transmission of forces with continuously variable   6 Series and 7 Series: Future technology made in Germany.
TTV transmission.

 With the Ready Kit, the interfaces for the front loader are already  Sauter municipal mounting (category 3/5). For fast and robust mounting of
fitted on the tractor. special equipment.

 The pneumatic trailer brake system decelerates trailers in all weight  Support frame from Sauter with adjustable communal pallet (category 3/5)
categories reliable and safely. and axle support for heavy attachment loads and outrigger.

CITYLINE - 57
COMBINE
HARVESTERS.
The origins of DEUTZ-FAHR
combine harvester production
extend far back into the last
century. Thanks to our experience
and spirit of innovation, we are
still manufacturing reliable, highly
efficient combine harvesters that
are easy to use and set up.

58 - COMBINE HARVESTERS
C9000 SERIES.
Maximum performance, minimum fuel consumption.

The C9000 Series upholds the DEUTZ-FAHR tradition of power and the large gull-wing side panels. Mercedes Benz OM936 Stage V 7.7
reliability, while also incorporating that blend of cab comfort and litre engine with maximum power of 280 kW (381 hp). Not only the
unmistakable styling which is the hallmark of the brand. There are design of this combine wins hearts but also its well known versatility
two models in 6 straw walkers: C9306 TS and C9306 TSB all with and efficiency with all crop types and in all conditions thanks to the
ideal characteristics for maximum productivity and versatility over multi-segments concave, easily customizable, the fine adjustments
large areas. The updated Commander Cab VI assures maximum of the concave and the Turbo-separator positions and the Balance
comfort and maximum control of the combine thanks to the models which allow to compensate gradients up to 20 % lateral and
multifunctional armrest and touch screen monitor. The bodywork 6 % longitudinal.
is elegant but at the same time practical and accessible, thanks to

Features • Mercedes Benz Stage V OM936 7.7-litre, 6-cylinder, 24-valve, turbo-intercooled engine with
electronic engine management system, double PTO, 750-litre fuel tank with EGR, SCR and DPF
systems and 76-litre AdBlue® tank
• Load sensing hydraulic system with variable displacement pump
• Heavy-duty adjustable rear axle, 4WD rear axle available with anti-skid system
• 10,500-litre grain tank, discharge rate 120 l / sec
• Header up to 9 metres with Schumacher Easy Cut II cutting system and Auto Control
• Extra Feeding system: feeder channel with internal finger roller and electrohydraulically
controlled cutting angle management
• Maxi Crop threshing system: double concave, multi-segment concave, synchro beater and
adjustable turbo-separator
• Twin-step ventilated sieve system and electrically adjustable sieves
• DGR (Double Grain Return) directly on the preparation pan
• Commander Cab VI: commander stick and multifunction armrest, iMonitor, rear view mirrors
and work lights optimised for maximum visibility, thermo-fridge as standard, fully adjustable
steering column and seat
• CFS - SDF Guidance with different levels of accuracy from 30 cm track-to-track to 2,5 cm

 With the ergonomic armrest integrating the COMMANDER STICK and the iMonitor you can  Best material flow thanks to the open straw-hood.
perform all combine harvester adjustments in a simple and effortless manner.

60 - COMBINE HARVESTERS
 C9000 SERIES
Technical data
C9306 TS C9306 TSB
ENGINE Mercedes Benz
Emissions Stage V
Max. power kW / hp 280 / 381
Cutting width m 5.40 / 6.30 / 7.20 / 9.00
Total separation area m² 8.90
Total cleaning area m² 6.32
Threshing drum diameter / width mm 600 / 1,521
Turbo Seperator ˜

Fuel tank l 750

AdBlue® tank l 76
Grain tank l 10,500

COMBINE HARVESTERS - 61
C7000 SERIES.
Superior performance and reliability.

Elegant design with a mild restyling. The C7000 Series is based on the and high cutting frequency give the header high performance and
unmistakable DEUTZ-FAHR style, which expresses the technological maximum reliability. Proven, exclusive DEUTZ-FAHR components,
superiority of the brand. This is your guarantee of top-quality such as the pull-out preparation pan with double step, turbine fan,
threshing and top-quality grain and straw. Adverse conditions, large sieves and Double Grain Return (DGR) on both sides of the
weeds, high humidity and laid crops: none of these compromise the machine, ensure that the grain is kept clean and undamaged. All
performance of the C7000, which guarantees high productivity and these factors make the C7000 combine harvesters suitable for any
top-quality threshing. The C7000 Series is equipped with Mercedes operating conditions. The Commander Cab V also ensures high levels
Benz Stage V OM936 7.7 litre engines that deliver high performance of driving comfort. With its innovative materials, high visibility, work
in the field – rated power ranges from 230 kW (313 hp) to 260 kW light positioning with LED lighting and xenon work lights (optional),
(353 hp) according to model – and the state of the art in terms of it provides outstanding comfort and a premium-feel operator
emissions, thanks to the EGR valve and the SCR technology with environment.
AdBlue®. The Schumacher cutting system, composite reel tines
­

Features • Mercedes Benz Stage V OM936 7.7-litre, 6-cylinder, 24-valve, turbo-intercooled engine with
electronic engine management system, double power take-off, 750-litre fuel tank with EGR, SCR
and DPF systems and 76-litre AdBlue® tank
• Load sensing hydraulic system with variable displacement pump
• Reinforced standard fixed axle. Heavy-duty adjustable rear axle and 4WD rear axle with anti-skid
system available as an option
• 9,500-litre gain tank for versions with 6 straw walkers and 8,500-litre grain tank for versions with
5 straw walkers; discharge rate 90 l / sec
• Header up to 9 metres with Schumacher Easy Cut II cutting system and Auto Control
• Maxi Crop threshing system: double concave, multi-segment concave, synchro beater and adjust-
able turbo-separator
• DGR (Double Grain Return) directly on the preparation pan
• Commander Cab V: ergonomically designed commander stick, CCM system, rear view mirrors,
elegant interior styling, first-class ergonomics with adjustable seat and steering wheel, optional
thermo-fridge, excellent in-field and on-road visibility
• Modern bodywork styling
• Side panels in sheet steel with gull-wing opening for rapid access to all parts of the combine
harvester

 Easy access to all controls, multifunctional COMMANDER Stick and 7" touch screen display  Thanks to the large width of the feeder channel, the threshing system is
always visible in all conditions. not limited when working with large quantities of crop.

62 - COMBINE HARVESTERS
 C7000 SERIES
Technical data
C7205 TS / TSB C7206 TS / TSB
ENGINE Mercedes Benz OM936
Emissions Stage V
Power @rated engine speed kW / hp 230 / 313 260 / 353
Cutting width m 4.20 / 4.80 / 5.40 / 6.30 / 7.20 4.20 / 4.80 / 5.40 / 6.30 / 7.20 / 9.00
Total separation area m² 7.36 8.80
Total cleaning area m² 5.28 6.32
Threshing drum diameter / width mm 600 / 1,270 600 / 1,520
Turbo Seperator ˜

Fuel tank l 750

AdBlue® tank l 76
Grain tank l 8,500 9,500

COMBINE HARVESTERS - 63
EXTRA BALANCE.
Exclusive balance system.

Thanks to the BALANCE system, consistent threshing quality and the cabin. This layout of the rear axle along with 2 powerful hydraulic
yield, both on the flat as well as on slopes and hilly terrain, are cylinders, lifts the rear part of the combine, keeping the combine
ensured. The inclination of the combine harvester is detected by in a horizontal position. The rear axle allows enough gradient of
potentiometers placed on the wheels and the data is processed by lateral tilt to follow the ground surface. The BALANCE front axle acts
an electronic control unit that immediately sends control impulses independently on each wheel to compensate for lateral gradients.
to the hydraulic system. The DEUTZ-FAHR EXTRA BALANCE Thanks to the combination of this system with the AUTOCONTROL;
system allows the combines to always work in a horizontal position, the combine harvester can compensate for lateral gradients up to
offsetting gradients of up to 28 % and downhill gradients of up to 22 %. The automatic inclination of the cutting angle, a DEUTZ-FAHR
5 %. The uniform weight distribution on the traction wheels provides exclusive system, ensures constant feeding as the gradient changes
the combine harvester with optimal power to the ground in all types and, with a constant cutting angle, avoids any potentially damaging
of working conditions. The BALANCE function is activated by simply ground contact. The threshing system, the straw walkers and the
pressing a button in the cab, with the possibility of manually adjusting cleaning system move the crop evenly, ensuring high productivity.
the machines position. The same principle applies for the rear The large grain tank, with max. capacity of 7500 litres, is completely
levelling system. The pivot point of the rear axle is placed 2 m toward filled even in the most difficult operating conditions.

Features • Mercedes Benz Stage V OM936 7.7-litre, 6-cylinder, 24-valve, turbo-intercooled engine with
electronic engine management system, double power take-off, 750-litre fuel tank with EGR, SCR
and DPF systems and 76-litre AdBlue® tank
• Load sensing hydraulic system with variable displacement pump
• Heavy-duty adjustable rear axle and 4WD rear axle with anti-skid system
• 7,500-litre gain tank for all versions discharge rate 90 l / sec
• Header up to 9 metres with Schumacher Easy Cut II cutting system and Auto Control
• Maxi Crop threshing system: double concave, multi-segment concave, synchro beater and adjust-
able turbo-separator
• DGR (Double Grain Return) directly on the preparation pan
• Commander Cab V: commander stick, CCM system, rear view mirrors, elegant interior styling,
first-class ergonomics with adjustable seat and steering wheel, optional thermo-fridge, excellent
in-field and on-road visibility
• Modern bodywork styling
• Side panels in sheet steel with gull-wing opening for rapid access to all parts of the
combine harvester

 Independent control between front BALANCE and rear levelling system, both with  The 25 t capacity axles allow the machine to work in the most extreme conditions,
automatic or manual function. ensuring utmost reliability and, above all, driver safety.

64 - COMBINE HARVESTERS
 EXTRA BALANCE
Technical data
C9206 TSXB
ENGINE Mercedes Benz OM936
Emissions Stage V
Max. power kW / hp 280 / 381
Cutting width m 4.20 / 4.80 / 5.40 / 6.30 / 7.20 / 9.00
Total separation area m² 8.80
Total cleaning area m² 6.32
Threshing drum diameter / width mm 600 / 1,520
Turbo Seperator ˜

Fuel tank l 750

AdBlue® tank l 76
Grain tank l 7,500

COMBINE HARVESTERS - 65
C6000 SERIES.
Your harvest, your technology, your success.

The DEUTZ-FAHR range reaches an evolutionary turning point in their high power and constant performance. With Common Rail
its history of serving farmers. The C6205 is the result of hundreds of injection, 24 valves and an electronic governor system, these engines
years of experience and constant further development. A gem in the deliver exactly the right amount of power for the occasion and can
category of the 5 straw walkers which embodies the technology respond to load peaks without losing productivity. The DOC Diesel
and winning philosophy of the DEUTZ-FAHR systems that users Oxidation Catalysts combined with the DPF (Diesel Particulate Filter)
already enjoy with the C7000 and C9000 lines. Experience on the and followed by the SCR (Selective Catalytic Reduction) manage
field and contact with loyal DEUTZ-FAHR customers has created the to considerably decrease the nitrogen oxide emissions (NOx)
foundation on which to develop the C6205 dedicated to medium- which are among the main pollutants that come from combustion,
sized farms that want to become independent by amplifying their without penalising the performance of the engines installed on the
machine yard with a reliable combine harvester that is compact, yet DEUTZ-FAHR combine harvesters. The turbo-separator version:
that ups productivity, optimally facing any type of harvest. C6000 the C6205 TS offers especially high threshing speed and quality in
models with 7000-litre grain tank and headers of up to 6.30 m difficult harvests and with high productivity. The Commander Cab II
stand out for their light weight, compact size and ease of use. The with high standard levels of comfort integrates the commander stick
C6205 and C6205 TS are both powered by the Deutz TCD L6 Stage for maximum ergonomics and control of the combine in every situation.
V 6.1-litre engines, cooled with liquid, distinguish themselves for

Features • Deutz TDC L6 Stage V 6.1-litre engine with 6 cylinders, 24 valves, turbo intercooler, electronic
engine management system, 450-litre fuel tank with DOC, DPF and SCR system and 53 litre
AdBlue® tank
• Hydrostatic pump flange-mounted directly to the engine
• 7,000-litre grain tank
• Schumacher Easy Cut II cutting system and Auto Contol
• Multi-segment concave and adjustable 5-position turbo-separator
• Turbine ventilation for constant, uniform airflow
• Twin-step ventilated sieve system with adjustable sieve
• Commander Cab EVO II

 Modern cab with comfortable console and adjustable, three-position steering column.   7000-litre grain tank to minimize unloading stops.

66 - COMBINE HARVESTERS
 C6000 SERIES
Technical data
C6205 C6205 TS
ENGINE Deutz TDC L6
Emissions Stage V
Max. power kW / hp 184 / 250
Cutting width m 4.20 / 6.30
Total separation area m² 6.23 / 6.36
Total cleaning area m² 4.25
Threshing drum diameter / width mm 600 / 1,270
Turbo Seperator ˜

Fuel tank l 450

AdBlue® tank l 53
Grain tank l 7,000

COMBINE HARVESTERS - 67
C5000 SERIES.
Remain independent, choose C5000.

DEUTZ-FAHR reflect 100 years of experience and evolving technology adjusted horizontally and vertically from the driving position and the
just as in 1909 the KÖDEL & BÖHM combine stood as a technological speeds are infinitely variable at the touch of a button. The user could
benchmark in terms of performance and quality applied to the change between: pressure controlled position of the cutter bar, fix
harvesting of grain. Maximum performance harvesting all types of height or Auto-control system to keep the desired cutting height
crops; reduced operating costs; exceptional cleanliness and quality constant by following the ground surface. The feeder channel with
of the grain; all the needed features in a compact design. The cutting two robust rams can be precisely adjusted to the required height. The
system runs precisely and with minimum wear; with its extremely maintenance of the feeding channel is easy and quick as all covers
high cutting frequency (1,200 cuts / min) the planetary knife drive can be removed fast to have full access to all gears, chains and belts.
ensures totally smooth and quiet operation. The reel is electrically

Features • Deutz TDC L6 Stage V 6.1-litre engine with 6 cylinders, 24 valves, turbo intercooler, electronic
engine management system, 300-litre fuel tank with DOC, DPF and SCR system and 53 litre
AdBlue® tank
• Hydrostatic pump flange-mounted directly to the engine
• 4,600-litre grain tank
• Schumacher Easy Cut II cutting system and Auto Contol
• Concave adjustable independently front and rear
• Turbine ventilation for constant, uniform airflow
• Commander Cab EVO

 The operating console places all control elements within the driver’s reach. The armrest with   C5000 planetary gear for high cut frequency.
Commander Stick guarantees perfect operating comfort.

68 - COMBINE HARVESTERS
 C5000 SERIES
Technical data
C5305
ENGINE Deutz TDC L6
Emissions Stage V
Max. power kW / hp 129 / 175
Power @Rated engine speed kW / hp 129 / 175
Cutting width m 3.60 / 4.20 / 4.80
Total separation area m² 5.10
Total cleaning area m² 3.75
Threshing drum diameter / width mm 600 / 1,100
Turbo Seperator –
Fuel tank l 300
AdBlue® tank l 53
Grain tank l 4,600

COMBINE HARVESTERS - 69
HEADERS.
The finest cut.

A wide range of grain cutting header for the most common uses but with proportional speed, adjusting automatically according to the
with unique features. Standard grain headers up to 9 m, with onepiece combine ground speed. This solution keeps a constant flow and
construction which means optimal weight distribution, long life and therefore better threshing. More crop types, more opportunities,
reliable performance on any terrain and harvesting conditions. The more equipment requirements. The DEUTZ-FAHR header range can
large diameter feeder auger has deep flights. This, together with the meet the different requirements of contractors as well as farmers all
auger fingers distributed in a spiral fashion along the entire auger, around the world and through the whole harvesting season.
ensures continuous feeding and productive crop transfer. Large reel

 For rape harvesting there is a specifically designed kit which can be applied to the  For sunflower harvesting a kit is designed to be applied to DEUTZ-FAHR standard
standard DEUTZ-FAHR headers up to 7.2 m. headers up to 7.20 m wide.

 Robust skid plates integrate the ground sensors to control the position of the cutting  Standard crop lifter easy-to-mount and special guide rollers (optional) reduce
header also on irregular terrains. vibration and wear even further.

 Large diameter of the intake auger with adjustable fingers in spiral all along the  Epicyclic gearing with 1,220 cuts/min for a high cutting frequency.
entire cutting width.

70 - COMBINE HARVESTERS
SDF SMART
FARMING
SOLUTIONS.
As well as a vast range of
tractors, DEUTZ-FAHR also
offers state-of-the-art digital
solutions facilitating the work
of farmers and contractors,
and making it more
productive.

SDF SMART FARMING SOLUTIONS - 73

 Highlights • Higher productivity • Optimum connectivity
• Easy to use • Highest level of compatibility
• Secure data • Maximum return
• Added convenience • Better planning of your tasks
• Unprecedented precision

74 - SDF SMART FARMING SOLUTIONS

Precision is the basic prerequisite for productivity.

SDF Smart Farming Solutions combines a large number of digital solutions for efficient and comfortable operation of tractors and combine
harvesters. This includes reliable, automatic high precision guidance systems, ISOBUS applications, and various applications for data management.
The iMonitor3 is at the core of the operation of most applications – it is the central, user friendly control element.

SDF GUIDANCE
Steering systems are becoming increasingly established as a standard in tractors and combines
on many farms. The advantages are obvious: saving resources, increasing convenience and
productivity as well as reliable precision. You can trust its high reliability even in difficult working
conditions such as fog or night time. Anyone who has ever worked with a steering system will
never want to be without it again. Many applications are based on satellite navigation. Our
receivers use free, internationally available signals which offer different accuracy levels depending
on the correction service and the receiver model. You can choose the system that best suits your
operation.

SDF DATA MANAGEMENT

Efficient data management is becoming increasingly important to optimise work processes.
No matter which type of data you want to work with, whether it’s machine or agronomic
data: SDF provides various applications for reliable transfer and insight of valuable data. Using
standard file formats, customers can keep an overview at all times and data are transferred in Data Management
a coordinated manner. This ensures maximum compatibility while our customers are always
master of their decisions.

SDF FLEET MANAGEMENT

Optimise operations. Increase efficiency. The new SDF Fleet Management offers customized
solutions to manage relevant machine data at a glance. Our customers like farmers, contractors
or any other users benefit from full control of their machines by accessing various valuable data.
The browser-based SDF Fleet Management application is the central interface to insight telemetry
data for DEUTZ-FAHR machines. Machine data like fuel level, position or speed are transferred in
real time into the application where users can monitor, analyse and optimise the usage of their
machinery. Error messages can be transmitted to dealer’s service manager to prevent upcoming
issues and decrease even machine downtime.

AGRIROUTER
For reliable online data exchange between different endpoints, SDF machines provide an interface
to the agrirouter. It is a universal data exchange platform that allows farmers and contractors
to exchange data like field boundaries or guidelines between machinery and any agricultural
software applications (e.g. an FMIS) from a wide range of providers

ISOBUS
Electronics make agricultural machinery safer, more powerful, more precise and more efficient.
Working with ISOBUS, the driver can use different applications to individually control all
implements with one single monitor. The iMonitor3 is the central control element for all ISOBUS
applications and easily manages tasks such as assigning AUX-N functions, processing application
maps or automatic section control of up to 200 sections. A great number of functions are even
available without activation. TIM automizes various functions between tractor and implement
to increase comfort, efficiency and ensures highest level of work quality. A wide range of
DEUTZ-FAHR tractor models are already TIM-ready and can easily be activated for full usage of
Tractor Implement Management.

SDF SMART FARMING SOLUTIONS - 75

76 - ORIGINAL PARTS
SERVICE.
DEUTZ-FAHR original parts: a safe choice.

ORIGINAL PARTS REPRESENT A RATIONAL CHOICE. service can deliver the most urgent orders in 24 hours, throughout
When choosing your tractor and implements, you put your trust in Europe, from Portugal to Finland to Greece, 365 days a year. The aim
original products. That’s why you should use only original parts for is simple: customers have to be able to find all maintenance parts and
those machines. Because only original parts meet DEUTZ-FAHR’s other frequently required parts at their specialised dealership. For all
stringent standards of quality and guarantee smooth operation, other requirements, the Lauingen distribution centre, which stocks
readiness for use and the long-term value of your purchase. over 220,000 parts, delivers within three days, so as to minimise
downtimes. Thanks to its excellent relations with international
A QUICK, EFFICIENT PARTS SERVICE. couriers, DEUTZ-FAHR can therefore offer a widely diverse range of
DEUTZ-FAHR has always prided itself of a quick, efficient parts products that represent excellent value for money.
service, and invests heavily in continuous improvement, with a
view to meeting the highest expectations of dealers, farmers and PREMIUM QUALITY ACCESSORIES TOO.
contractors. In fact, we apply the same rules to our parts service as DEUTZ-FAHR dealers also offer a wide range of accessories for the
we apply to the development of our tractors: continuous investment most diverse supply requirements, including chemical products for
in personnel, ICT systems and logistics technologies, in order to make cleaning, work lights, driving seats, packaging rope and netting,
an already excellent service even quicker and more efficient. wear parts and parts for other brands. And they all offer the same
high quality and reasonable prices, so that you don’t have to waste
PUNCTUAL DELIVERY WORLDWIDE. time and effort on finding the right parts.
Our worldwide parts distribution centre is centrally and strategically
located in Lauingen (Germany). That’s why the DEUTZ-FAHR Parts

DEUTZ-FAHR SERVICE.
Not just close, but also fast.

• High quality requirements

• Original spare parts in premium quality
• Fast and efficient spare parts service
• On-time deliveries – worldwide
• Varied product range
• Excellent price-performance ratio

ORIGINAL PARTS - 77
PROFESSIONAL FINANCING.
DEUTZ-FAHR your financial partner.

EFFECTIVE FINANCIAL PARTNERS. personnel have extensive knowledge of the products and markets
DEUTZ-FAHR provides professional finance schemes developed in question and can therefore work with dealers to formulate
on the basis of market prices for all buyers of tractors, combine individual finance packages that facilitate decision-making about
harvesters and other products. Our range of financial services the investment and are properly tailored to the customer’s needs.
includes conventional products such as loans and leasing agreements, DEUTZ-FAHR has a skilled team of office-based and travelling
but we can also tailor plant hire solutions to your specific needs. All personnel, who provide all DEUTZ-FAHR dealers and their customers
our financial packages also include insurance services. Our skilled – whether farmers or contractors – with an expert assistance service.

78 - FINANCIAL SERVICES
PROFESSIONAL ASSISTANCE AND CONSULTING. right up to approval of the loan. The same efficient service also assists
Experts visit customers on site to discuss the available finance customers on all matters relating to transfer of ownership, changes
options and help complete the necessary formalities. Quickly, simply to loans and leases, changes to finance plans and other contractual
and professionally. Field support personnel organise every phase, issues.

FINANCIAL SERVICES - 79
Marketing-Communication Service – Code 308.8355.3.4-7 – 03/21

For more information, please contact your DEUTZ-FAHR sales partner

or visit deutz-fahr.com.

DEUTZ-FAHR is a brand of