Scribd
Upload
86 views2 pages

Floodlights For LED Lamps: SFD Led - Sfde Led

This document provides information on SFD LED and SFDE LED explosion proof floodlights for use in hazardous areas. It lists the installation classifications as Zone 1/2 for gases and Zone 21/22 for dusts. The lights have protection degrees of IP66 and operate within an ambient temperature range of -20°C to +60°C. Various models providing 160W, 192W or 224W of power are available with cable entries of either 1x3/4" NPT or 2x ISO-M20 ports.

Uploaded by

muaadh
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
86 views2 pages

Floodlights For LED Lamps: SFD Led - Sfde Led

This document provides information on SFD LED and SFDE LED explosion proof floodlights for use in hazardous areas. It lists the installation classifications as Zone 1/2 for gases and Zone 21/22 for dusts. The lights have protection degrees of IP66 and operate within an ambient temperature range of -20°C to +60°C. Various models providing 160W, 192W or 224W of power are available with cable entries of either 1x3/4" NPT or 2x ISO-M20 ports.

Uploaded by

muaadh
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

SFD LED - SFDE LED Explosion Proof Electrical Equipment

Floodlights for LED lamps Ex Lighting

Installation: hazardous areas - Zone 1 / 2 (Gases) - Zone 21 / 22 (Dusts)


Classification: Group II - Category 2G 2D

SFD LED - SFDE LED


www.feam-ex.com
REFERENCE STANDARDS
Directive 94/9/EC (until April 19th, 2016) - Directive 2014/34/EU (from April 20th, 2016)
II 2 G Ex d IIB + H2 T6...T4 or
EXECUTION II 2 G Ex de IIB + H2 T6...T4
II 2 D Ex tb IIIC T85°C...T135°C
RULES OF COMPLIANCE EN/IEC 60079-0; EN/IEC 60079-1; EN/IEC 60079-7; EN/IEC 60079-31
EC Type-Examination Certificate INERIS 01 ATEX 0018
PROTECTION DEGREE IP66
AMBIENT TEMPERATURE -20°C ÷ +60°C
OTHER AVAILABLE CERTIFICATES IECEx: IECEx INE 15.0003X
INMETRO: CEPEL 15.2363X
EAC: TC RU C-IT.ГБ08.В.01342 (-60°C÷+60°C)
RINA: ELE18111CS_014
RUSSIAN MARINE CERTIFICATE (RMRS): 13.03516.315

Mechanical characteristics
Body marine grade copper free aluminium
Diffuser tempered front glass
Support adjustable type hot dip galvanized steel
Painting external epoxy powders grey ral-9006 colour
Screws external stainless steel
Gaskets silicon rubber
Cable entry ISO-M20 / 3/4” NPT

Electrical characteristics
Power supply 90÷305Vac electronic driver 50 Hz (277V according to the certificate)
Lamp type Power LED (700 mA) - LED type "cold white"
Internal wiring high-temperature resistant silicon rubber insulation cables
Terminals suitable up to 4 sq/mm cables

On Request Accessories:
• External painting colour on request
• Threaded cable entry different than standard

Bartec Feam Catalogue 04 I 1


Explosion Proof Electrical Equipment

SFD LED - SFDE LED Technical data Ex Lighting

POWER TEMPERATURE CLASS TEMPERATURE CLASS LAMP CABLE ENTRY


CODE DETAIL
LAMP ( GAS ) (DUSTS) TYPE SIZE
SFD LED - SFDE LED

FLOODLIGHTS FOR LED LAMP - POWER SUPPLY 230V 50Hz


SFD160-LED T6 (Ta = -20°C / +40°C) T 85°C 1 x 3/4“ NPT A
160 W T5 (Ta = -20°C / +50°C) T 100°C
SFDE160-LED T4 (Ta = -20°C / +60°C) T 135°C 2 x ISO-M20 B

SFD192-LED 1 x 3/4“ NPT A


192W T4 (Ta = -20°C / +60°C) T135°C POWER LED
SFDE192-LED 2 x ISO-M20 B

SFD224-LED T6 (Ta = -20°C / +40°C) T 85°C 1 x 3/4“ NPT A


224 W T5 (Ta = -20°C / +50°C) T 100°C
SFDE224-LED T4 (Ta = -20°C / +60°C) T 135°C 2 x ISO-M20 B
www.feam-ex.com

SFD LED - SFDE LED Technical features


CODE A [mm] B [mm] C [mm] D [mm] E [mm] F [mm] WEIGHT [Kg] CABLE ENTRY DETAIL
SFD160-LED
SFD192-LED 485 390 100 292 462 190 25,00 1 x 3/4“ NPT A
SFD224-LED

SFDE160-LED
SFDE192-LED 485 390 100 292 462 240 26,00 2 x ISO-M20 B
SFDE224-LED

Reference details
A
A F C
1 x 3/4“ NPT

D
B

1 x 3/4“ NPT E
125 125

B
A F C

2 x ISO-M20
D
B

2 x ISO-M20
125 125

REMARK:
Due to the development of the national and international specifications and of the technology, the above technical characteristics showed on this bulletin
can be considered as binding on our confirmation only.

2 I Bartec Feam Catalogue 04

You might also like