ENERGY METER

www.icdipl.net DEM 9004F

FEATURES
DEM 9004F
n Single DC Voltage Channel (DEM9004F)

n Two Isolated DC Voltage Channels (DEM9024F)

n Four DC Current Channels

n Current measurement through Shunt or Hall Sensors

DC Energy Meter
ADDITIONAL FEATURES DEM9024F
n Power Supply for Hall Sensors Provided in the meter
n Two isolated DC Voltage Channel
n Micro controller based with precision ADC
n Four DC Current Channels
n Programmable CT primary current individually for 4 channels
n DEM9024F used to monitor two independent BTS Systems
n Displays DC Voltage, Current, kW, kWh and Run hour with different DC Voltages in a single meter
n Separate energy and run hour register provided for n Grouping of voltage and current for measurement
all the four channel
n Isolation between voltage channels
n Digital Calibration by software

n Energy & Run hour storage in EEPROM back up OPTIONAL FEATURES

n kWh range 999999.99 kWh n Optically isolated RS485 communication port with
n Run hour range 9999.59 hours MODBUS RTU protocol

n Password protected n Split core Hall effect CT's suitable for mounting on
load cable without disturbing the load
n Quick & easy to install

n Sealed Dust proof enclosure suitable for Panel mounting

APPLICATIONS
n Telecom Tower Monitoring systems

n Railway Power systems that uses DC supply

n Solar Power System.

n DC Panel Meter

n UPS

n Any DC Plants that Needs Monitoring with PC Support

www.icdipl.net
 TECHNICAL SPECIFICATION ( DEM 9004F, DEM 9024F )
MEASURED QUANTITIES DISPLAY
Parameter Shown : 1) DC Voltage Type : 2 Row 16 Character LCD with Backlit
2) DC Current Character Size : 4.35 x 2.95 mm ( H x W )
3) kW LCD Power save Mode : Provided. When no key is pressed for
4) kWh 3 minutes, the LCD Backlit is switched
5) Runhour OFF to save power and enhance
the life of LCD. The LCD is switched ON
when any key is Pressed
MEASUREMENT
Voltage Range : 20 – 100V DC (One/Two Voltage channels)
Current Range : Up to 100 A (Programmable) KEY FUNCTIONS
Key Pad : 4 Keys for setting program mode
Current Input : 50 mV / 75 mV from shunt OR parameters and to select scroll / hold
0 – 4 V from Split core Hall effect CT's Display Mode
Program Mode Setting : Pass word, Current setting, Device ID,
Auxiliary voltage : Derived from voltage input LCD power save mode & Energy reset
Entry Protection : Provided through Password
Accuracy : DC voltage : +/-0.5 % on reading + 2 LSD Energy & Run hour : Stored in EEPROM
DC Current : +/-0.5 % on reading + 2 LSD
kW : +/-0.5 % on reading + 2 LSD
kWh : +/-0.5 % COMMUNICATION
Run Hour : +/- 3 sec / day Communication (Optional) : Optically isolated RS485 Communication
Port supporting MODBUS-RTU Protocol
Display resolution : DC voltage : 0.01 V
DC Current : 0.1 A
kW : 0.001 kW
kWh : 0.01 kWh
CASE AND DIMENSIONS
Enclosure : Poly Carbonate
Run Hour : 1 minute
Dimension : 96(H) x 96(W) x 45(D) mm
Mounting : Panel
Operating Temperature : 55° C (Max.)

Note: Specifications are subject to change without prior notice due to continuous improvement in product development.

DC ENERGY METER ACCESSORIES

ENERGY METER

www.icdipl.net DEM 9004F

DC Energy Meter with Shunt Box Shunt Hall effect CT

OUR RANGE OF PRODUCTS

Volt Meter, Ammeter, VAF Meter, Energy Meter, Dual Source Meter, Load Manager, Multi Function Meter, Trivector Meter, Maximum Demand Controller,
Harmonic Indicator, Power Factor Controller, Smart PF Controller, Power Factor Correction Panel, AC Voltage Controller, AC Current Controller,
Motor Protection System, Voltage/Current/Power/Frequency Transducer, Power Transmitter, Energy Management and Billing Systems etc...

33, Mettukuppam Road (Via Alappakkam Road), Maduravoyal, Chennai 600095, Tamil Nadu, India
Mobile: +91 87544 22555 / 87544 22502 Phone: +91 44 4293 4324 / 25 / 33 / 2378 1753
Fax: +91 44 4293 4355 E-mail: [email protected] / [email protected] Web: www.icdipl.net