Scribd
Upload
33 views5 pages

Tested by Witnessed by Approved BY Witnessed by Approved BY Signature Siginature Siginature Name Name Name Date Date Date Laxmi Associate Steag TSPL

1. This document summarizes the testing and calibration of protection devices on an 11kV switchboard panel. 2. Measurements of current transformers, voltage transformers, and circuit breaker current transformers were within acceptable limits. 3. Differential protection, overcurrent protection, negative phase sequence, and overload settings were tested at various levels and times and were found to operate as required.

Uploaded by

Amaresh Nayak
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
33 views5 pages

Tested by Witnessed by Approved BY Witnessed by Approved BY Signature Siginature Siginature Name Name Name Date Date Date Laxmi Associate Steag TSPL

1. This document summarizes the testing and calibration of protection devices on an 11kV switchboard panel. 2. Measurements of current transformers, voltage transformers, and circuit breaker current transformers were within acceptable limits. 3. Differential protection, overcurrent protection, negative phase sequence, and overload settings were tested at various levels and times and were found to operate as required.

Uploaded by

Amaresh Nayak
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 5

Date:09-11-2018

1.0 Name Plate Details:


Location : 11 KV Switch Board
Make. : NR
Panel Name & No : 20BBA07, BFP
Model No : RCS9627 CN
SL No : 7669111103401
CT Ratio : 1500/5A & 1500/5A
CBCT RATIO : 100/5A
PT Ratio : 11 KV/110V

2.0 Measurement Function Check: -

CT MEASUREMENT
Injected current(A) Injected Measurement Measurement current(A)
Phase
side-1 current(A) side-2 current(A) side-1 side-1
R 5 5 5.01 5.01
Y 5 5 4.99 4.99
B 5 5 5.01 4.99

CBCT MEASUREMENT
Phase Injected current(A) Measurement current(A)
N 5 4.98

PT MEASUREMENT
Phase Injected Voltage(V) Measurement Voltage (Ph-N)
R 63.51 63.49
Y 63.51 63.49
B 63.51 63.50

APPROVED APPROVED
TESTED BY WITNESSED BY WITNESSED BY
BY BY
SIGNATURE SIGINATURE SIGINATURE
NAME NAME NAME
DATE DATE DATE
LAXMI ASSOCIATE STEAG TSPL
1
Date:09-11-2018

3.0 DIFFERENTIAL PROTECTION

3.1 Pickup Test HV side: SET CURRENT: - 1.08A

Phase Set Current (A) Opt. Current (A) Operating Time (ms)
R-Y-B 1.08 1.08 72

3.2 Pickup Test LV side: SET CURRENT: - 1.08A

Phase Set Current (A) Opt. Current (A) Operating Time (ms)
R-Y-B 1.08 1.08 75

3.3 Stability Test:

Injected current(A) Injected current(A)


Phase Id Value Ib Value Relay Status
side-1 side-2
R 5∠0⁰ 5∠180⁰
Y 5∠-120⁰ 5∠60⁰ 0 5 Stable
B 5∠+120⁰ 5∠300⁰
R 5∠0⁰ 5∠0⁰
Y 5∠-120⁰ 5∠-120⁰ 9.94 5 Tripped
B 5∠+120⁰ 5∠+120⁰

3.4 Slope Test:

0.5*In Set Slope=0.40


Injected current(A) Injected current(A)
Phase Id1 Ib1 Relay Status
side-1 side-2
R 2.5∠0⁰ 3.436∠180⁰
Y 2.5∠-120⁰ 3.436∠60⁰ 0.92 2.97 Relay Operated
B 2.5∠+120⁰ 3.436∠300⁰

APPROVED APPROVED
TESTED BY WITNESSED BY WITNESSED BY
BY BY
SIGNATURE SIGINATURE SIGINATURE
NAME NAME NAME
DATE DATE DATE
LAXMI ASSOCIATE STEAG TSPL
2
Date:09-11-2018

1*In
Injected current(A) Injected current(A)
Phase Id2 Ib2 Relay Status
side-1 side-2
R 5∠0⁰ 7.176∠180⁰
Y 5∠-120⁰ 7.176∠60⁰ 2.16 6.086 Relay Operated
B 5∠+120⁰ 7.176∠300⁰

SLOPE =Id2-Id1/Ib2-Ib1 = (2.16-0.92) / (6.086-2.97)


=39.79%

3.5 Differential High Stage:


SET CURRENT: -14.4 A
Phase Set Current (A) Opt. Current (A) Operating Time (ms)
R-Y-B 14.4 14.4 45

4.0 Over Current:


Stage: -1 SET CURRENT: - 30 A SET TIME: - 0 Sec
Phase Set Current (A) Injected Current (A) Set time (Sec) Opt. Time (m Sec)
R 30 30 0 45
Y 30 30 0 45
B 30 30 0 45

Stage: -2 SET CURRENT: - 28 SET TIME: - 0.05 Sec


Phase Set Current (A) Injected Current (A) Set time (Sec) Opt. Time (m Sec)
R 28 28 0.05 85
Y 28 28 0.05 85
B 28 28 0.05 85

Stage: -3 SET CURRENT: - 4.8A SET TIME: - 24 Sec


Phase Set Current (A) Injected Current (A) Set time (Sec) Opt. Time (Sec)
R 4.8 4.8 24 24.03
Y 4.8 4.8 24 24.03
B 4.8 4.8 24 24.03

APPROVED APPROVED
TESTED BY WITNESSED BY WITNESSED BY
BY BY
SIGNATURE SIGINATURE SIGINATURE
NAME NAME NAME
DATE DATE DATE
LAXMI ASSOCIATE STEAG TSPL
3
Date:09-11-2018

5.0 Negative Phase Sequence:


Stage: -1 SET CURRENT: - 3.6A SET TIME: - 0.7 Sec
Phase Set Current (A) Injected Current (A) Set time (Sec) Opt. Time (Sec)
R 0.68 0.68 0.7 0.746
Y 0.68 0.68 0.7 0.746
B 0.68 0.68 0.7 0.746

Stage: -2 SET CURRENT: - 1.8A SET TIME: - 1.6 Sec


Phase Set Current (A) Injected Current (A) Set time (Sec) Opt. Time (Sec)
R 1.8 1.8 1.6 1.63
Y 1.8 1.8 1.6 1.63
B 1.8 1.8 1.6 1.63

6.0 Over Load Current:


SET CURRENT: - 4.3A SET TIME: - 20 Sec
Phase Set Current (A) Injected Current (A) Set time (Sec) Opt. Time (Sec)
R 4.3 4.4 20 20.03
Y 4.3 4.4 20 20.03
B 4.3 4.4 20 20.03

7.0 Thermal Overload:


SET CURRENT: - 6A
Phase Set Current (A) Injected Current (A) Alarm Opt. Time (Sec)
R 6 6 80% 3.03
Y 6 6 80% 3.03
B 6 6 80% 3.03

8.0 Residual Over Current:


SET CURRENT: - 3A SET TIME: - 50 m Sec
Phase Set Current (A) Injected Current (A) Set time (A) Opt. Time (m Sec)
N 3 3 0.05 83

APPROVED APPROVED
TESTED BY WITNESSED BY WITNESSED BY
BY BY
SIGNATURE SIGINATURE SIGINATURE
NAME NAME NAME
DATE DATE DATE
LAXMI ASSOCIATE STEAG TSPL
4
Date:09-11-2018

9.0 Under Voltage:


SET VOLTAGE: - 50V SET TIME: - 9.0 Sec
Phase Set Voltage (Vpp) Injected Voltage (Vpn) Set time (Sec) Opt. Time (Sec)
R 50 28.5 9 9.06
Y 50 28.5 9 9.06
B 50 28.5 9 9.06

10. Remarks: -

APPROVED APPROVED
TESTED BY WITNESSED BY WITNESSED BY
BY BY
SIGNATURE SIGINATURE SIGINATURE
NAME NAME NAME
DATE DATE DATE
LAXMI ASSOCIATE STEAG TSPL
5

You might also like