40-ton Hydraulic Truck Crane

36.29-mt Hydraulic Truck Crane

• 35.5’–110’ (10.82–33.53 m) 4-section full power boom
• 28.5’–51’ (8.69-15.54 m) two-piece offsettable fly, bi-fold, on-board
lattice attachment with 2°, 20°, and 40° offsets–optional
• 167’ (50.90 m) maximum tip height
• Modular style counterweights
•15,871 lbs (70.59 kn) maximum winch line pull
• 502 fpm (153.2 m/min) maximum winch line speed
­• Automated transmission
• 60.7 mph (97.7 km/hr) travel speed
• Front & rear air ride suspension
• Three lockable storage boxes
• “Stow ‘n Go” steel pontoons
 This lean and mean machine is built
to meet the toughest road laws.
• Drives like an automatic and has the power of a manual transmission
• Air ride suspension on front and rear axle
• Travels with full counterweight

Cruise in one load to your next job site!

• Speeds up to 60.7 mph (97.7 km/hr) on the highway, unmatched in
the industry today
• Move it on the job site at 1.3 mph (2.0 km/hr) creep speed at idle for
maximum maneuverability.
• Automated transmission (no clutch pedal) - 12 speeds forward,
2-speeds reverse with two modes of operation: fully automatic and
semi-automatic
• Cruise control
• Three-stage engine compression brake
• Ether injection system - optional

Comfortable carrier cab provides high visibility Hydraulic counterweight transfer/removal system
• Ultra-Cab with fiberglass construction • Easily positions counterweight on carrier deck for efficient axle load distribution.
• Dash-mounted comprehensive instrumentation with backlit gauges • Modular counterweights offer up to four lifting combinations.
• Roll up/down door window provides excellent ventilation
• Fully adjustable air ride fabric seat
• Suspended pedals
• Right sideview and backup cameras Counterweight transfer
removal controls located on
each side of the upper structure.

Innovative two-part paint

coating technology, coupled
with a pre-assembly paint
process, provides the finest
quality coating system
available today.

Air-ride suspension
front and rear provides a
smooth ride and precise
handling. Optional air-ride
There are three standard locking storage lift system holds the rear
boxes with an optional fourth. suspension retracted while
the crane is on outriggers.
4-section full power boom
with attachment flexibility
• 35.5’ to 110’ (10.8 - 33.5 m)
• 167’ (50.90 m) maximum tip height with full attachment

Hammerhead boom nose allows the operator to work at

high boom angles without fouling wire rope.

Lightweight nylon head sheaves

reduce weight and increase capacity.

Quick reeve head machinery for

fast, easy line change

Optional auxiliary lifting sheave

requires only one person to install
and does not need to be removed
when the attachment is erected,
regardless of offset.

Optional 28.5’ to 51’ (8.7 - 15.5m) two-piece bi-fold lattice fly

• Erection of two-piece (bi-fold) lattice fly is a one-person operation — easy to erect & stow
• Exclusive design reduces side deflection when lifting load Large engine doors
• Also available: One-piece 28.5’ (8.7 m) lattice fly with lugs to allow addition of second section allow for easy access
• Attachments offset to 2°, 20° and 40°

Large west coast-style

rear viewing mirrors

Non-slip surface strips

on carrier deck

Side-view
camera
Exclusive Amax mode (mode “A”) offers substantially
increased capacities. Standard mode (mode “B”)
self-proportions all four sections equally.

Overhead console for

document storage with
AM/FM radio

Daytime
running lights
Aluminum wheels
and radial tires with
Self-storing fifth
chrome and stainless
outrigger pontoon
wheel accents
Integrated air conditioning
(not a roof-mounted system)
 Powerful & responsive piston winch
• Two-speed motor with automatic brake
• Grooved drums minimize rope harmonic motion
and improve spooling
• Optional auxiliary two-speed winch

Mechanical boom angle Winch camera

indicator - standard Optional hoist drum cable follower
and optional third wrap indicators

Folding viewing
mirror for travel

Operators cab with

AM/FM radio and
BlueTooth™

Guardrails
Optional integrated
air conditioning
Swing camera

Rearview camera

Carrier-mounted outrigger controls, located on each

side of the carrier, include an engine throttle-up switch
for fast outrigger deployment. For fine level adjusting of
the carrier, throttle can be taken down to idle.

Full air, S-cam anti-lock (ABS)

brakes on all wheel ends with
automatic slack adjusters The Confined Area Lifting
Capacities (CALC) system
provides three outrigger
positions:
• full retraction
Stow ‘n Go outrigger pontoons are • intermediate extension
quickly and easily stored and secured • full extension Retracted Intermediate Full
for travel, eliminating the need to
remove the pontoon each time the Outrigger pins eliminate
crane moves. Pontoon storage space guesswork by automatically
is also available on rear fenders and
side access ladders.
positioning outriggers at
midpoint position.
 The operator’s cab is roomier and
quieter than traditional cabs
• Six-way adjustable fabric seat with lift-up armrest
(which deactivates control functions when raised)
• Armrest mounted, responsive dual axis hydraulic controllers
• Bubble level sight level mounted on side console
• Ducted air through automotive-style directional vents
• Sliding right side, rear windows and swing-up roof window
• Single foot pedal boom telescope control
• Automotive-style windshield
• Corner-post-mounted, backlit gauges
• Large, sweeping electric wipers
• Dashless design
• Engine-dependant warm water heating with defroster
• Winch and right side swing view cameras
• AM/FM radio

Superior accessibility
Access to the operator’s cab and engine compartment is
superb with strategically located ladders and steps. The
pull-out CabWalk™ slides out from its secured travel
position underneath the operator’s cab to give the operator
a platform to stand on for easy entry and exit from the cab.

Optional external light bar Internal light bar

Telematics. You own the data!

Cellular-based data logging and monitoring system that provides:
• Viewing options for sharing data with distributor and Link-Belt
• Location and operational settings
• Monitor routine maintenance intervals
• Crane and engine monitoring
• Diagnostic and fault codes
 Link-Belt Construction Equipment Company is a leader in the design,
manufacture, and sales of telescopic and lattice boom cranes with
headquarters and manufacturing facilites in Lexington, Kentucky,
USA. Link-Belt is committed to the manufacture and service of
high quailty products that satisfy customers worldwide
Towards that end, Link-Belt has pursued a strategy of growth and
investment. It has moved aggressively to seize more global market
share by producing a broader range of products and strengthening
distribution and personnel around the globe.
Link-Belt is also home to a family of passionate professionals with a
legacy of innovation and cutting-edge technology spanning over 135
years. These professionals, in a 740,000 sq. ft. (68 748 m2)
manufacturing facility and with a culture of continuous innovation,
have pushed Link-Belt to be the most modern crane manufacturer
in North America.

Your crane investment is always protected...

with your Link-Belt distributor.

When you invest in a Link-Belt crane, you invest in

a legacy of outstanding customer support dating
back to 1874. The ultimate value of a machine
begins with state-of-the-art design and quality
manufacturing, but it is the excellent
Link-Belt distributor product support
that determines its long term value.
This philosophy has earned Link-Belt
cranes the enviable position of
traditionally commanding some
of the highest resale prices in
the industry.

As a member of Link-Belt Cranes user’s group,

you will have access to:
• A comprehensive online library of all parts, service and
operator manuals for YOUR crane
• Interactive, live groundbearing calculations for YOUR crane
• Plus a vast array of information on new products, services
and special offerings
• Online access to recommended spare parts lists, filter,
lube and key lists plus maintenance information and more
• No annual fee or charges to access your crane information

®Link-Belt is a registered trademark. Copyright 2015

All rights reserved. We reserve the right to change
designs and specifications at any time.
Litho in U.S.A. 1577 9/15 Lexington, Kentucky | www.linkbelt.com