Scribd
Upload
316 views2 pages

Sandwich Panel Design Calculation Design Criteria

This document summarizes the design calculations for a sandwich panel. It provides the design criteria including material strengths and panel dimensions. It then analyzes the panel under dead and wind loads, checking for cracking and composite action. Finally, it checks stresses during shipping and erection to ensure they remain below allowable limits.

Uploaded by

janeth
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd
316 views2 pages

Sandwich Panel Design Calculation Design Criteria

This document summarizes the design calculations for a sandwich panel. It provides the design criteria including material strengths and panel dimensions. It then analyzes the panel under dead and wind loads, checking for cracking and composite action. Finally, it checks stresses during shipping and erection to ensure they remain below allowable limits.

Uploaded by

janeth
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd
You are on page 1/ 2

Sandwich Panel design calculation

Design criteria

f'c = 40 Mpa 75 mm
25 50 mm
qw = 1.3 kPa 75 mm
3.12 kN/m
height = 6.47 m 2.4 m
ts = 75 mm
a = 2,400 mm
A = 360,000 mm2
I = 1,575,000,000 mm4
w = 9 kN/m

Analysis
At mid height
Dead load (selft weight)
Pd = 64.5 kN

Windload
Mw = 16.33 kNm

Consider thermal bow because panel is composite


DT = C(T1-T2)l²/8h = 0.31 in 7.84892 mm

Initial bow
Assume initial outward bow of L/360, based on PCI specified max bow toleranc 17.97 mm

Ec 29725.4100055828 Mpa
EI = 39,794,892,644,973.90 Nmm²

= 2.86 mm

Case1:
Pu = 87.075 kN
EI 19897446322487 Nmm2 EI= Fk EI/(1+bd)for wind load bd=1

Mu = 26.12 + PD
Di+Dw= 20.83 mm

P-D analysis
0.02 e

First i D= 0.48 mm
Second D= 0.49 mm
First i D= 0.49 mm

Mu = 26.16 kNm

Check for cracking at mid-height of panel


Pu 87.075 kN
Sandwich Panel design calculation
26.16
fdl+wi (1.42) Mpa tension 2.5 Mpa (fctk)
Section is uncracked

fdl+wi (1.66) Mpa tension 2.5 Mpa (fctk)


Section is uncracked

1.2 Mc 47.25 kNm

As 393 mm²
a 2.41 mm
Mn = 60.01 kNm > 1.2 Mcr = 47.25 kNm ok

Composite action of concrete and insulation


Tu = 472 kN
Cu = 6,120.00 kN

Stripping
f'ci 15 Mpa
w 3.75 kPa
static 1.35
wt = 5.0625 kN/m

x-x direction
Mx = 2.02 kNm
over a 3000 mm
Ix= 1,968,750,000.00 mm4
fb= 0.1025 Mpa < 1.1 Mpa ok

y-y direction
My = 0 4.26 kNm
over a 1,200.0 mm
Ix,48 787500000 mm4
fb= 0.541 Mpa < 1.1 Mpa ok

yard handling
Shipping
Static 1.5
w= 5.625
fby = 0.81 Min concrete age during shipping = fck =20MPa

Erection
w 10.80
M= 55.12 kNm
fby = 3.500 Mpa < 3.5 Mpa ok

You might also like