CONTRACTORS MONTHLY SAFETY AUDIT CHECKLIST

Project Number: Project Name:

Phase:
Date Completed:

Contractor:

Safety Representative:

Total Employees:

Total Contractor employees:

Total subcontractor employees:

1.0 Current Status of Contract (Check appropriate activities)

Site clearing & grubbing Overhead mechanical/electrical

Excavation Interior finishes

Foundations Demolition

Structural frame Remodeling

Exterior enclosure Close out

Other:

2.0 Office Procedures

Yes No N/A Description

1. Safety & health poster posted.

2. Emergency telephone numbers posted.

3. First aid kit & supplies on job.

4. Copy of OSHA safety standard in the office.

5. Toolbox meeting reports issued, forwarded to Project Superintendent & filed.

6. Safety notices issued, forwarded to appropriate personnel and filed.

7. Received visit from OSHA this month.

8. Emergency stretcher located on job – near hoist or elevator.

9. Any first aid injuries reported were forwarded to Site Management.

10. OSHA Form 200 posted.

N/A = Not Applicable “NO” requires Corrective Action

3.0 Site Security & Warning Signs

 Yes No N/A Description
1. Site secured with fence and gates. Gates closed and locked.

Corrective action:

2. Warning signs posted for general public.

Corrective action:

3. Overhead protection installed where any overhead work is taking place.

Corrective action:

4. Any exterior storage of flammable liquids:

a) At least 20 feet from all buildings

b) No smoking signs posted (signs should read Danger- Flammable)

c) Containers properly labeled

d) Spill containment in place

Corrective action:

5. All excavation are appropriately laid out and secured.

Corrective action:

6. All mobile equipment is locked when not in use.

Corrective action:

7. Occupied areas of the project are barricaded and warning signs posted.

Corrective action:

N/A = Not Applicable “NO” requires Corrective Action

4.0 Safety Responsibilities

 Yes No N/A Description

1. Perimeter guard rails are installed properly for protection of all employees.

Corrective action:

2. All floor openings protected by guardrails or are covered, secured and marked.

Corrective action:

3. Temporary ladders properly installed to all levels, and secured at the top and the bottom.

Corrective action:

4. Operating rules posted in operator’s station (or equivalent), and all equipment safety inspected at
the start of the day.

Corrective action:

5. Adequate overhead protection for individuals working near hoisting areas.

Corrective action:

6. All hoist entrances guarded by barricades and/or conventional fall protection.

Corrective action:

7. Employees are wearing hard hats and all required personal protection equipment.

Corrective action:

8. Fire protection and emergency evacuation procedures are established.

Corrective action:

N/A = Not Applicable “NO” requires Corrective Action

 4.0 Safety Responsibilities (Continued)

Yes No N/A Description

9. Fire extinguishers installed throughout the project and have been adequately inspected.

Corrective action:

10. Weekly toolbox meetings are taking place with field employees of contractors/subcontractors.

Corrective action:

11. Adequate toilet facilities are installed and are kept in a sanitary condition.

Corrective action:

12. Trash containers and regular disposal is provided.

Corrective action:

13. An adequate supply of portable water is available and clearly marked. Paper cups and trash
containers are also provided.

Corrective action:

14. Traffic control measures are used to protect crossing traffic and pedestrians.

Corrective action:

15. New employees processed through project orientation and have been instructed on specific safety
procedures.
Corrective action:

16. Excavations and trenches are sloped properly or braced.

Corrective action:

N/A = Not Applicable “NO” requires Corrective Action

 4.0 Safety Responsibilities (Continued)

Yes No N/A Description

17. Perimeter guardrail systems installed at all floor edges and openings.

Corrective action:

18. Housekeeping is kept up to date.

Corrective action:

19. All flammable liquids are properly stored and handled.

Corrective action:

20. Gas cylinders are transported, used and/or stored properly.

Corrective action:

21. Temporary lighting is installed in areas where it is needed. Lighting is in good working condition.

Corrective action:

22. Temporary electrical systems are on ground fault systems.

Corrective action:

22a. Extension cords include ground fault protection and are in good condition.

Corrective action:

23. All cranes and/or rigging equipment are inspected daily before use.

Corrective action:

N/A = Not Applicable “NO” requires Corrective Action

 4.0 Safety Responsibilities (Continued)

Yes No N/A Description

24. Mobile cranes are checked for stability, and outriggers properly blocked on stable ground.

Corrective action:

25. Counterweight swing areas are barricaded to prevent access to unaware workers.

Corrective action:

26. Crane operators are cautioned to stay an adequate distance from all overhead power lines.

Corrective action:

27. All welders are instructed in safe welding and cutting practices. Fire protection measures are taken
and fire extinguishers are available.

Corrective action:

28. Scaffolds are adequately erected. Scaffolds are equipped with ladders and base plates.

Corrective action:

29. Scaffolds or platforms are tightly planed for full width.

Corrective action:

30. All scaffolds or platforms are provided with a guard rail (2 x 4) or equivalent 42" high, midrail
(2x4) or equivalent and a toe board 4" high.

Corrective action:

31. Hanging or suspended scaffolds are checked daily. Safety harnesses and lifelines are used by
employees.
Corrective action:
N/A = Not Applicable “NO” requires Corrective Action

4.0 Safety Responsibilities (Continued)

Yes No N/A Description

32. All damaged or excessively worn equipment is tagged out or removed from service.

Corrective action:

33. Additional safety requirements implemented for this project.

Corrective action:

5.0 Additional Comments,

N/A = Not Applicable “NO” requires Corrective Action

cc:
File 0031A