Scribd
Upload
141 views1 page

Ipe 300

This document summarizes the structural analysis of a steel traverse beam. The beam is an IPE 300 section made of steel grade S235. It is subjected to a decisive loading case that results in internal forces and moments that are all below the section's ultimate resistance capacities. Checks are also performed to verify the section is adequate under combined bending and buckling, and that shear stresses are below allowable values. The section passes all verification criteria.

Uploaded by

Nadhem Rejeb
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as RTF, PDF, TXT or read online on Scribd
141 views1 page

Ipe 300

This document summarizes the structural analysis of a steel traverse beam. The beam is an IPE 300 section made of steel grade S235. It is subjected to a decisive loading case that results in internal forces and moments that are all below the section's ultimate resistance capacities. Checks are also performed to verify the section is adequate under combined bending and buckling, and that shear stresses are below allowable values. The section passes all verification criteria.

Uploaded by

Nadhem Rejeb
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as RTF, PDF, TXT or read online on Scribd
You are on page 1/ 1

CALCUL DES STRUCTURES ACIER

----------------------------------------------------------------------------------------------------------------------------------------
NORME: Eurocode 3 (ENV 1993-1-1:1992)
TYPE D'ANALYSE: Dimensionnement des familles
----------------------------------------------------------------------------------------------------------------------------------------
FAMILLE: 3 travers
PIECE: 31 TRAVERSE _31 POINT: 7 COORDONNEE: x = 0.10 L = 1.21
m
----------------------------------------------------------------------------------------------------------------------------------------
CHARGEMENTS:
Cas de charge décisif: 23 ELU13 (1+2)*1.35+4*1.50
----------------------------------------------------------------------------------------------------------------------------------------
MATERIAU:
ACIER E24 fy = 235.00 MPa
----------------------------------------------------------------------------------------------------------------------------------------

PARAMETRES DE LA SECTION: IPE 300


h=30.0 cm gM0=1.00 gM1=1.00
b=15.0 cm Ay=32.10 cm2 Az=19.78 cm2 Ax=53.81 cm2
tw=0.7 cm Iy=8356.11 cm4 Iz=603.78 cm4 Ix=19.47 cm4
tf=1.1 cm Wely=557.07 cm3 Welz=80.50 cm3
----------------------------------------------------------------------------------------------------------------------------------------
EFFORTS INTERNES ET RESISTANCES ULTIMES:
N.sd = 3889.92 daN My.sd = -12212.57 daN*m Mz.sd = -2.06 daN*m Vy.sd = 2.46 daN
Nc.rd = 126458.20 daN Mply.rd = 14149.31 daN*m Mplz.rd = 2911.32 daN*m
Vply.rd = 43552.42 daN
Nb.rd = 51182.83 daN Mny.rd = 14135.92 daN*m Mnz.rd = 2908.57 daN*m Vz.sd = 4118.53 daN
Vplz.rd = 26837.79 daN

Classe de la section = 1
----------------------------------------------------------------------------------------------------------------------------------------

PARAMETRES DE DEVERSEMENT:
----------------------------------------------------------------------------------------------------------------------------------------
PARAMETRES DE FLAMBEMENT:

en y: en z:
Ly = 10.25 m Lambda_y = 0.80 Lz = 12.06 m Lambda_z = 1.26
Lfy = 10.25 m Xy = 0.72 Lfz = 3.98 m Xz = 0.40
Lambda y = 75.30 ky = 1.04 Lambda z = 118.63 kz = 1.07
----------------------------------------------------------------------------------------------------------------------------------------
FORMULES DE VERIFICATION:
(My.sd/Mny.rd)^a+(Mz.sd/Mnz.rd)^b = 0.75 < 1.00 (5.35) a=2.00 b=1.00
Nsd/(Xmin*A*fy/gM1)+ky*My.sd/(Wply*fy/gM1)+kz*Mz.sd/(Wplz*fy/gM1) = 0.97 < 1.00 (5.51)
Vy.sd/Vply.rd = 0.00 < 1.00 Vz.sd/Vplz.rd = 0.15 < 1.00 (5.20)
----------------------------------------------------------------------------------------------------------------------------------------
Profil correct !!!

You might also like