2

Supply of compressed air (1 or P)

Exhaust (3, 5 or E, R)

Silencer

Filter with manual water drain

Filter with automatic water drain

Pressure regulator
with secondary exhaust

Lubricator

FRL – filter/regulator/lubricator-
assembly

Air preparation
equipment

13
 Ai r pr epar ation equip me nt

Contents
2  preparation – modular system
Air

Accessories and spare parts
17
21


EAV – soft start-up valve 23

VP-X538 – valve for

safety-related systems 23

AMG – water separator; AM, AMD

&
 AMH – mist and micro mist separators 24

IDG
 – membrane air dryer 25

IDFA
 – dryer 26

AF
 – high flow air filter 26

SFD
 – clean air filter, in-line 27

AMC
 – filter silencer 27

ARM5, -10 & -11 – compact

manifold
 regulator 28

AR
 & XT13 – high flow regulator 28

ARJ
 – miniature regulator 29

ARX
 – high pressure regulator 29

ARP
 – precision regulator 30

IR1000, -2000 & -3000

– precision regulator 31

ITV1000, -2000 & -3000

– E/P converter 32

ITV0000
 – E/P converter 33

AN
 – silencer 34

Series
 25 – silencer 34

VBA
 – pressure booster 35

IDK
 – moisture control tube 36
Subject to changes

14
 A i r p r epa r at i o n eq u i p m en t

Installation and operation

SMC’s modular air treatment system enable significant 2
advantages for warehousing, assembly and service.

E
ach unit is equipped with connection threads and
therefore can also be used for single mounting (no
extra adapters needed)
With only a small component stock, a machine can
be equipped with both modular units and separate regu-
lators, filter and lubricators. This also means benefits in
exchange and repair.
The individual units are combined with spacers that
also serve as mounting brackets. Replacement of an in-
dividual unit is easily done by releasing the components
from the spacers. By using threaded adapters, you can
replace units without having to unscrew them. Adapters
for pressure switches, extra ports, shut-off valves etc.
are available as accessories.

Note
Do not exceed stated maximum pressure and tempera-
ture values.

Connection threads Microfilters

Size 10: M5
Size 20–60: G-thread to ISO 228/1. NPT and Rc on The filter element should be replaced once a year or
request. when the pressure drop over the filter reaches 0.1 Mpa.

Installation Installation
Before the installation of air preparation unit, make sure The air is pre-filtered with an AF-filter before the micro-
that all debris, cutting oil, dust, etc., are removed from filter (AFM).
the piping.
Pressure regulators
Mounting position
Regulators: Optional Pressure setting AR10–60
Filter/filter regulators/lubricators: Bowl facing down. Pull the adjusting knob straight out. Turn to the desired
The units should be mounted following the arrow pressure. Lock the set value by pressing the knob. For
direction. unhampered pressure setting, at least 60 mm clearance
for the adjusting knob is required.
Bowl
Polycarbonate bowls must not be exposed to synthetic Maintenance
oils, thinner, trichlorethylene, kerosene or other aromatic In case of malfunction, check that:
hydrocarbons. For cleaning, use neutral detergent. A primary pressure is higher than the set output pres-
sure.
Automatic drain B main valves seat is not clogged.
Drain condensate with plastic pipe/tubing Ø6/4 with C membrane or spring have not been damaged.
max. length of 5 m. The pipe is installed in a way that If unregulated air streams through the regulator, this is
condensate is always free to be diverted. most likely due to diaphragm failure.
Subject to changes

15
 Ai r pr epar ation equip me nt

Filters Lubricators
Operation The minimum flow given in technical data provide proper
Open the blow-off valve to blow out the collected con- function. As a reference for setting the oil flow, SMC in-

2
densate; do not let the liquid level reach up to the whirl dicates 5 drops/min.
disc.
Operation
Maintenance Lubricators AL30–AL60 can be filled with oil under
In case of malfunction, check if the flow direction is cor- pressure. Remove the filler plug and add oil to the mark
rect. If the flow drops, or if the pressure drop increases “Max. Oil Level”. The quantity of distributed oil is regu-
significantly, the filter element should be cleaned or lated by setting the needle valve.
replaced.
Maintenance
Sub-microfilters In case of malfunction, check that:
A flow direction is correct.
To prolong the life of the filter element it is recommended B oil level is between markings “Min. Oil Level” and
to pre-filter with a microfilter. Replace the filter ele- “Max. Oil Level”.
ment when the pressure drop across the filter reaches C needle valve is not clogged. Clean if necessary.
0.1 MPa, or at least once a year.

Subject to changes

16
 A i r p r epa r at i o n eq u i p m en t

Air preparation – modular system

Medium Compressed air

2
Filter, filter regulator: 5 µm
Degree of filtration
Microfilter: 0.3 µm; sub-microfilter: 0.01 µm
Max. working pressure 1 MPa (10 bar)
Lubricator: 0.05 MPa (0.5 bar);
Min. working pressure
automatic drain: 0.15 MPa (1.5 bar)
Operating temperature –5 to 60 °C
Series 10 20 30 40 50 60
Pressure gauge 1/16 1/8 1/8 1/4 1/4 1/4
Flow See below

■  New adapters for simplified installation  ■  Regulator with improved

sensitivity and built-in gauge  ■  Ozone-resistant HNBR seals

Filter AF Regulator AR
With manual drain Without pressure gauge
Part number Connection Flow Part number Connection
AF10-M5 M5   120 ln/min AR10-M5 M5
AF20-F01 G1/8   800 ln/min AR20-F01 G1/8
AF20-F02 G1/4   800 ln/min AR20-F02 G1/4
AF30-F02 G1/4 2000 ln/min AR25-F02 G1/4
AF30-F03 G3/8 2000 ln/min AR30-F02 G1/4
AF40-F03 G3/8 3500 ln/min AR30-F03 G3/8
AF40-F04 G1/2 3500 ln/min AR40-F04 G1/2
AF40-F06 G3/4 4000 ln/min AR40-F06 G3/4
AF50-F06 G3/4 7000 ln/min AR50-F06 G3/4
AF60-F10 G1 8000 ln/min AR60-F10 G1
Flow: 7 bar up to 0.3 bar (0.03 MPa) pressure drop. With built-in pressure gauge
Elements: We recommend replacement of elements once a year or at Δp 1 bar.
Part number Connection
Filter AF AR20-F01E G1/8
With automatic drain AR20-F02E G1/4
Part number Connection Flow AR25-F02E G1/4
AF10-M5C M5   120 ln/min AR30-F02E G1/4
AF20-F01C G1/8   800 ln/min AR30-F03E G3/8
AF20-F02C G1/4   800 ln/min AR40-F04E G1/2
AF30-F02D G1/4 2000 ln/min AR40-F06E G3/4
AF30-F03D G3/8 2000 ln/min AR50-F06E G3/4
AF40-F03D G3/8 3500 ln/min AR60-F10E G1
AF40-F04D G1/2 3500 ln/min Panel nut not included. For panel nut and bracket, see accessories.
AF40-F06D G3/4 4000 ln/min
Regulator AR – with back flow
AF50-F06D G3/4 7000 ln/min
Without pressure gauge
AF60-F10D G1 8000 ln/min
Part number Connection
AR20K-F01 G1/8
AR20K-F02 G1/4
AR25K-F02 G1/4
AR30K-F02 G1/4
Filter AF Regulator AR AR30K-F03 G3/8
AR40K-F04 G1/2
AR40K-F06 G3/4
AR50K-F06 G3/4
AR60K-F10 G1
With built-in pressure gauge
Part number Connection
AR20K-F01E G1/8
AR20K-F02E G1/4
AR25K-F02E G1/4
AR30K-F02E G1/4
AR30K-F03E G3/8
AR40K-F04E G1/2
AR40K-F06E G3/4
Subject to changes

AR50K-F06E G3/4
Please contact SMC for converting adapter R1/16 to
AR60K-F10E G1
R1/8 AR10 gauge connection. Panel nut not included. For panel nut and bracket, see accessories.

17
 Ai r pr epar ation equip me nt

Air preparation – modular system

Filter regulator AW – with manual drain Filter regulator AW – with automatic drain

2 Without pressure gauge

Part number
AW10-M5
AW20-F01
AW20-F02
Connection
M5
G1/8
G1/4
Without pressure gauge
Part number
AW10-M5C
AW20-F01C
AW20-F02C
Connection
M5
G1/8
G1/4
AW30-F02 G1/4 AW30-F02D G1/4
AW30-F03 G3/8 AW30-F03D G3/8
AW40-F04 G1/2 AW40-F04D G1/2
AW40-F06 G3/4 AW40-F06D G3/4
AW60-F06 G3/4 AW60-F06D G3/4
AW60-F10 G1 AW60-F10D G1
With built-in pressure gauge With built-in pressure gauge
Part number Connection Part number Connection
AW20-F01E G1/8 AW20-F01CE G1/8
AW20-F02E G1/4 AW20-F02CE G1/4
AW30-F02E G1/4 AW30-F02DE G1/4
AW30-F03E G3/8 AW30-F03DE G3/8
AW40-F04E G1/2 AW40-F04DE G1/2
AW40-F06E G3/4 AW40-F06DE G3/4
AW60-F06E G3/4 AW60-F06DE G3/4
AW60-F10E G1 AW60-F10DE G1
Panel nut not included. For panel nut and bracket, see accessories. Panel nut not included. For panel nut and bracket, see accessories.

Filter regulator AW Filter regulator AW

– with back flow and manual drain – with back flow and automatic drain
Without pressure gauge Without pressure gauge
Part number Connection Part number Connection
AW10-M5 M5 AW10-M5C M5
AW20K-F01 G1/8 AW20K-F01C G1/8
AW20K-F02 G1/4 AW20K-F02C G1/4
AW30K-F02 G1/4 AW30K-F02D G1/4
AW30K-F03 G3/8 AW30K-F03D G3/8
AW40K-F04 G1/2 AW40K-F04D G1/2
AW40K-F06 G3/4 AW40K-F06D G3/4
AW60K-F06 G3/4 AW60K-F06D G3/4
AW60K-F10 G1 AW60K-F10D G1
With built-in pressure gauge With built-in pressure gauge
Part number Connection Part number Connection
AW20K-F01E G1/8 AW20K-F01CE G1/8
AW20K-F02E G1/4 AW20K-F02CE G1/4
AW30K-F02E G1/4 AW30K-F02DE G1/4
AW30K-F03E G3/8 AW30K-F03DE G3/8
AW40K-F04E G1/2 AW40K-F04DE G1/2
AW40K-F06E G3/4 AW40K-F06DE G3/4
AW60K-F06E G3/4 AW60K-F06DE G3/4
AW60K-F10E G1 AW60K-F10DE G1
Panel nut not included. For panel nut and bracket, see accessories. Panel nut not included. For panel nut and bracket, see accessories.

Filter regulator AW Filter regulator AW

– manual drain – automatic drain
Subject to changes

18
 A i r p r epa r at i o n eq u i p m en t

Air preparation – modular system

Regulator ARG – with pressure gauge in handle Panel nut – for ARG and Bracket – with panel nut,

2
AWG for ARG and AWG
Part number Connection
ARG20K-F02G1 G1/4 Part number Part number
ARG30K-F03G1 G3/8 ARG20P-260S ARG20P-270AS
ARG40K-F04G1 G1/2 ARG30P-260S ARG30P-270AS
ARG40P-260S ARG40P-270AS
Filter regulator AWG – with pressure gauge in handle
Part number Connection
AWG20K-F02G1 G1/4 Regulator ARG Filter regulator AWG
AWG30K-F03G1 G3/8 – with pressure gauge – with pressure gauge in
in handle handle
AWG40K-F04G1 G1/2
Panel nut ordered separately. Pressure gauge placement can be rotated.

Lubricator AL Microfilter AFM – (filtration 0.3 µm)

Part number Connection Part number Connection
AL10-M5 M5 AFM20-F01 G1/8
AL20-F01 G1/8 AFM20-F02 G1/4
AL20-F02 G1/4 AFM30-F03 G3/8
AL30-F03 G3/8 AFM40-F04 G1/2
AL40-F04 G1/2
AL50-F06 G3/4 Sub-microfilter AFD – (filtration 0.01 µm)
AL60-F10 G1 Part number Connection
AFD20-F01 G1/8
Lubricating oil – ISO VG32 AFD20-F02 G1/4
Part number Amount AFD30-F03 G3/8
AL-OLIE 20 liters AFD40-F04 G1/2

Lubricator AL Microfilter AFM Sub-microfilter AFD

Shut-off valve VHS Silencer AN – for VHS

Part number Series Conn. Exhaust Part number Connection
VHS20-F01 20 G1/8 G1/8 AN10-01 R1/8
VHS20-F02 20 G1/4 G1/8 AN20-02 R1/4
VHS30-F02 25, 30 G1/4 G1/4 AN30-03 R3/8
VHS30-F03 25, 30 G3/8 G1/4 AN40-04 R1/2
VHS40-F02 40 G1/4 G3/8
VHS40-F03 40 G3/8 G3/8
VHS40-F04 40 G1/2 G3/8
Shut-off valve Silencer AN
VHS40-F06 40 G3/4 G1/2 VHS
VHS50-F06 50, 60 G3/4 G1/2
VHS50-F10 50, 60 G1 G1/2
Subject to changes

19
 Ai r pr epar ation equip me nt

Air preparation – modular system

Pressure switch IS10M – pressure range: 0.1–0.6 MPa

2
(max. working pressure: 0.7 MPa)
Part number Series
IS10M-20-6L 20 Pressure switch IS10M Pressure switch IS10E
IS10M-30-6L 25.30
IS10M-40-6L 40
IS10M-60-6L 50, 55, 60

Pressure switch IS10E – with threaded connection (adap-

ter), pressure range: 0.1–0.6 MPa (max. working pressure: 0.7 MPa)
Part number Series Connection
IS10E-20F02-6L 20 G1/4
IS10E-30F03-6L 25.30 G3/8
IS10E-40F04-6L 40 G1/2
Pressure gauge GP46,
with pressure switch

Pressure gauge G Pressure gauge GP46 – with pressure switch, 0.1–0.8 MPa
Part number Connection Series Pressure Part number Connection Pressure
G27-10-R1 R1/16 10 0–1.0 MPa GP46-10-01-Q R1/8 0–1.0 MPa
G36-2-01 R1/8 20, 30 0–0.2 MPa GP46-10-02-Q R1/4 0–1.0 MPa
G36-4-01 R1/8 20, 30 0–0.4 MPa
G36-10-01 R1/8 20, 30 0–1.0 MPa Panel mounting kit – for GP46
G36-10-01-L R1/8 20, 30 0–1.0 MPa Part number
G46-2-02 R1/4 40, 50, 60 0–0.2 MPa 1305104-4A
G46-4-02 R1/4 40, 50, 60 0–0.4 MPa
G46-10-02 R1/4 40, 50, 60 0–1.0 MPa Pressure gauge GC3 – square, for panel mounting
G46-10-02-L R1/4 40, 50, 60 0–1.0 MPa Part number Connection Series Pressure
Integrated 20, 30, 40,
Panel mounted pressure gauge G46 GC3-10AS
mounting 50, 60
0–1.0 MPa
Part number Connection Port diam. Pressure Integrated 20, 30, 40,
GC3-2AS 0–0.2 MPa
G46-10-01M-C R1/8 + female M5 48.5 mm 0–1.0 MPa mounting 50, 60

Digital pressure switch ISE35

– integrated, including 2 meter cable
Pressure Pressure
gauge G gauge G-L Part number1 Connection Series Pressure
Integrated 20, 30, 40,
ISE35-N-65-LA 0–1.0 MPa
mounting 50, 60
Integrated 20, 30, 40,
ISE35-R-65-LA 0–1.0 MPa
mounting 50, 60
1. ISE35-N = bottom-mounted cable, ISE35-R = top-mounted cable.
Please contact SMC for converting adapter R1/16 to
R1/8 AR10 gauge connection.
ISE35-N Digital pressure
switch ISE35,
­mounted on
AR ­regulator

ISE35-R

FR combination – ­shut-off valve VHS,

filter regulator AW and soft start-up AV
With automatic drain, without pressure gauge
Part number Connection Series
AC20XSE-F02C-1000 G1/4 20
AC30XSE-F03D-1001 G3/8 30
AC40XSE-F04D-1002 G1/2 40
AC50XSE-F06D-1003 G3/4 50, 60
AC50XSE-F10D-1004 G1 50, 60 FR combination
With automatic drain and built-in pressure gauge
Part number Connection Series
AC20XSE-F02CE-1005 G1/4 20
Subject to changes

AC30XSE-F03DE-1006 G3/8 30
AC40XSE-F04DE-1007 G1/2 40
AC50XSE-F06DE-1008 G3/4 50, 60
AC50XSE-F10DE-1009 G1 50, 60

20
 A i r p r epa r at i o n eq u i p m en t

Air preparation – modular system

2
Accessories and spare parts
Connection block Output
Part number Series Connection Part number Series Connection
E100-M5 10 M5 Y110-M5 10 M5
E200-F01 20 G1/8 Y210-F01 20 G1/8
E200-F02 20 G1/4 Y210-F02 20 G1/4
E200-F03 20 G3/8 Y310-F01 25, 30 G1/8
E300-F03 25, 30 G3/8 Y310-F02 25, 30 G1/4
E300-F04 25, 30 G1/2 Y410-F02 40 G1/4
E400-F02 40 G1/4 Y410-F03 40 G3/8
E400-F03 40 G3/8 Y610-F03 50, 55, 60 G3/8
E400-F04 40 G1/2 Y610-F04 50, 55, 60 G1/2
E400-F06 40 G3/4
E600-F06 50, 55, 60 G3/4
Mounting adapter Mounting adapter – with T-bracket
E600-F10 50, 55, 60 G1
Part no Series Part no Series
Output with check valve Y100 10 Y100T 10
– prevents back flow of lubricated air Y200 20 Y200T 20
Part number Series Connection Y300 25, 30 Y300T 25, 30
AKM2000-F02 20 G1/4 Y400 40 Y400T 40
AKM3000-F02 25, 30 G1/4 Y500 40-061 Y500T 40-061
AKM4000-F03 40 G3/8 Y600 50, 55, 60 Y600T 50, 55, 60
Similar to older 1000–6000 series. 1. Y500 series does not fit the size 50 but is
designed for size 40 with 3/4" thread (F06).
Distribution unit – the main connections are not threaded
Part number Series Connection
Y14-M5 10 M5
Y24-F01 20 G1/8
Y24-F02 20 G1/4
Y34-F01 25, 30 G1/8
Y34-F02 25, 30 G1/4
Y44-F02 40 G1/4 Output Mounting adapter Mounting adapter
with T-bracket
Y44-F03 40 G3/8

Connection block Output Distribution unit

with check valve 2 port valve

Mounting
adapter

Adapter – FRL Filter

Fits ­mounting
Part number Connection adapter
E210-U01 1/8 Y200 & Y200T
E210-U02 1/4 Y200 & Y200T
E310-U02 1/4 Y300 & Y300T
E310-U03 3/8 Y300 & Y300T Adapter
E410-U02 1/4 Y400 & Y400T Adapter E10 Mounting example
E410-U03 3/8 Y400 & Y400T
E410-U04 1/2 Y400 & Y400T Angle adapter – FRL, female taper thread
Fits ­mounting
Plug – FRL Part number Connection adapter
Subject to changes

Part number Fits mounting adapter E300P-070S-02 Rc1/4 Y300 & Y300T
E210-P Y200 & Y200T E300P-070S-03 Rc3/8 Y300 & Y300T
E310-P Y300 & Y300T E400P-070S-03 Rc3/8 Y400 & Y400T
E410-P Y400 & Y400T E400P-070S-04 Rc1/2 Y400 & Y400T

21
 Ai r pr epar ation equip me nt

Air preparation – modular system

Knob cover – only fits new series. Lock not included. Lock brace – for up to 6 padlocks

2 Part number
AR20P-580AS
AR25P-580AS
AR30P-580AS
AR40P-580AS
Fits
AR20, AW20
AR25, AW25
AR30, AW30
AR40, AW40
Part number
NVHS-OG-80

Knob cover AR

Lock brace

Panel nut Mounting bracket – panel nut included

Part number Fits Part number Fits
AR10P-260S AR10, AW10 AR10P-270AS AR10, AW10
AR20P-260S AR20, AW20 AR20P-270AS AR20
AR25P-260S AR25 AW20P-270AS AW20
AR30P-260S AR30, AW30 AR25P-270AS AR25
AR40P-260S AR40, AW40 AR30P-270AS AR30, AW30
AR50P-260S AR50, AW50, AW60 AR40P-270AS AR40, AW40
AR50P-270AS AR50, AR60, AW60
AF20P-050AS AF20, AFM20, AFD20, AL20
AF30P-050AS AF30, AFM30, AFD30, AL30
AF40P-050AS AF40, AFM40, AFD40, AL40
AF50P-050AS AF50, AR60 AL50, AL60

Filter element Filter bowl

Part number Fits Part number Fits Materials
AF10P-060S AF, AW10 C1SF AF, AW10 Polycarbonate
AF20P-060S AF, AW20 C2SF AF, AW20 Polycarbonate
AF30P-060S AF, AW30 C3SF AF, AW30 Polycarbonate
AF40P-060S AF, AW40 C4SF AF, AW40, 50, 60 Polycarbonate
AF50P-060S AF, AW50 C1SF-6 AF, AW10 Nylon
AF60P-060S AF60 C2SF-6 AF, AW20 Nylon
AW60P-060S AW60 C3SF-6 AF, AW30 Nylon
AFM20P-060AS AFM20 C4SF-6 AF, AW40, 50, 60 Nylon
AFM30P-060AS AFM30 C1SF-2 AF, AW10 Metal
AFM40P-060AS AFM40 C2SF-2 AF, AW20 Metal
AFD20P-060AS AFD20 C3SF-2 AF, AW30 Metal
AFD30P-060AS AFD30 C4SF-2 AF, AW40, 50, 60 Metal
AFD40P-060AS AFD40
Filter bowl – polycarbonate, with automatic drain
Part number Fits Flow direction
AD17 AF, AW10 Normally closed
AD27 AF, AW20 Normally closed
AD38 AF, AW30 Normally open
AD48 AF, AW40, 50, 60 Normally open
AD37 AF, AW30 Normally closed
AD47 AF, AW40, 50, 60 Normally closed

Lubricator bowl – polycarbonate Lubricating oil – ISO VG32

Part number Fits Part number Amount
C1SL AL10 AL-OLIE 20 liters
C2SL AL20
C3SL AL30
Subject to changes

C4SL AL40
AL10P-080AS Sight glass AL10
AL20P-080AS Sight glass AL20, 30, 40

22
 A i r p r epa r at i o n eq u i p m en t

EAV – soft start-up valve

Medium Air, lubricated or not lubricated

2
Degree of filtration 5 µm
Max. working pressure 1 MPa (10 bar)
Min. working pressure 0.2 MPa (2 bar)
Operating temperature 0 to 60 °C
Pressure gauge G1/8
Voltage 24 VDC (220 VAC and others on request)
Power requirements 1.8 W
Electrical connection Connection DIN 43650BY (included in EAV)
Enclosure IP65

■  Easy to connect to air preparation unit

■  Gives smaller dimensions
■  Combinations can be customized and pre-assembled

Soft start-up valve – 24 VDC, with connection

Part number Connection Flow
EAV2000-F02-5YZ-Q G1/4 1168 ln/min
EAV3000-F03-5YZ-Q G3/8 2160 ln/min
EAV4000-F04-5YZ-Q G1/2 3533 ln/min
EAV5000-F06-5YZ-Q G3/4 6160 ln/min
EAV5000-F10-5YZ-Q G1 6653 ln/min
EAV pressurizes the system by adjustable throttle.
Pilot valve for EAV – spare part
When the EAV reached 50% of the set pressure, it opens to full flow.
Part number Voltage
The EAV has quick exhaust in case of emergency
For 220 VAC, contact SMC. SF4-5YZ-80-Q   24 VDC
SF4-4YZ-80-Q 220 VAC
Soft start-up valve – pneumatic
Part number Connection Flow Silencer – for exhaust port
EAVA2000-F02 G1/4 1168 ln/min Part number Silencing Connection
EAVA3000-F03 G3/8 2160 ln/min AN20-02 30 dB R1/4
EAVA4000-F04 G1/2 3533 ln/min AN30-03 30 dB R3/8
AN40-04 30 dB R1/2
AN500-06 30 dB R3/4
AN600-10 30 dB R1
Silencer ordered separately.

VP-X538
– valve for safety-related systems
Type VP544/VP744 VP544R/VP744R
Medium Air
Working pressure 0.25–0.7 MPa (2.5–7 bar)
Operation Internal pilot type External pilot type
Operating temperature –10 to 50 °C (no freezing/no condensation)
Voltage 24 VDC
Electrical connection DIN 43650C and M12 connector
Enclosure IP65
Note! No less than 0,25 MPa external pilot pressure (as working pressure). Use external pilot type
if supply pressure may drop or is choked on start-up. Valve must be combined with a relevant
control system in order to comply with EN ISO 13849-1.

■  Easy modular connection to air preparation unit  ■  Compact size  ■  For control systems
in category 3 and 4 (EN ISO 13849-1)  ■  Redundant valves and mechanical feedback on control inputs

Valve
Part number Connection Flow
Subject to changes

VP544-5YZ1-03F-M-X538 G3/8 1275 ln/min

VP544R-5YZ1-03F-M-X538 G3/8 1275 ln/min
VP744-5YZ1-04F-M-X538 G1/2 2258 ln/min
VP744R-5YZ1-04F-M-X538 G1/2 2258 ln/min

23
 Ai r pr epar ation equip me nt

AMG – water separator;

AM, AMD & AMH – mist and micro mist separators

2 Medium
Degree of filtration
Max. working pressure
Min. working pressure
Operating temperature
Compressed air
See below
1.0 MPa (10 bar)
0.05 MPa (0.5 bar); 0.15 MPa (1.5 bar) with automatic drain
5 to 60 °C
Size 150 250 350 450 550 650 850
1/8 1/4 3/8 1/2 3/4 1 1 1/2
Connection
1/4 3/8 1/2 3/4 1 1 1/2 2
■  Water separator removes 99% of the condensated water (AMG)
■  Micro and sub-microfilters
■  Automatic drain

Water separator – with automatic drain Filter element

Part number Connection Flow1 Part number Part number
AMG150C-F01D G1/8    300 ln/min AMG-EL150 AMD-EL250
AMG250C-F02D G1/4    750 ln/min AMG-EL250 AMD-EL350
AMG250C-F03D G3/8    750 ln/min AMG-EL350 AMD-EL450
AMG350C-F03D G3/8   1500 ln/min AMG-EL450 AMD-EL550
AMG450C-F04D G1/2   2200 ln/min AMG-EL550 AMD-EL650
AMG550C-F06D G3/4   3500 ln/min AMG-EL650 AMD-EL850
AMG650-F10D G1   6000 ln/min AMG-EL850 AMH-EL250
AMG850-F14D G1 1/2 12000 ln/min AM-EL250 AMH-EL350
AM-EL350 AMH-EL450
Microfilter – with automatic drain (filtration 0.3 µm) AM-EL450 AMH-EL550
Part number Connection Flow1 AM-EL550 AMH-EL650
AM250C-F02D-T
AM250C-F02D G1/4    750 ln/min AM-EL650 AMH-EL850
AM350C-F03D-T
AM350C-F03D G3/8   1500 ln/min AM-EL850
AM450C-F04D-T
AM450C-F04D G1/2   2200 ln/min
AM550C-F06D-T
AM550C-F06D G3/4   3500 ln/min
AM650-F10D-T
AM650-F10D G1   6000 ln/min Brackets assembly – for AM series
AM850-F14D-T
AM850-F14D G1 1/2 12000 ln/min Part number Size
AM-BM101 150
Sub-microfilter – (filtration 0.01 µm) AM-BM102 250
Part number Connection Flow1 AM-BM103 350
AMD250C-F02-T G1/4    500 ln/min AM-BM104 450
AMD350C-F03-T G3/8   1000 ln/min AM-BM105 550
AMD450C-F04-T G1/2   2000 ln/min BM56 650
AMD550C-F06-T G3/4   3500 ln/min BM57 850
AMD650-F10-T G1   6000 ln/min
AMD850-F14-T G1 1/2 12000 ln/min Mounting adapter
Part number Series
Combined micro- and sub-microfilter Y200
– (filtration 0.01 µm) AM150C
Y300 AM250C
Part number Connection Flow1
Y400 AM350C
AMH250C-F02-T G1/4    500 ln/min
Y500 AM450C
AMH350C-F03-T G3/8   1000 ln/min
Y600 AM550C
AMH450C-F04-T G1/2   2000 ln/min
Mounting adapter with T-bracket can not be used. Use brackets for wall mounting.
AMH550C-F06-T G3/4   3500 ln/min For series 650 or 850, use fittings (see chapter 10).
AMH650-F10-T G1   6000 ln/min
AMH850-F14-T G1 1/2 12000 ln/min
1. Specified maximum flow is at 0.7 MPa (7 bar).
Mounting adapter

Water separator Microfilter and

AMG sub-microfilter AM,
Subject to changes

AMD and AMH

24
 A i r p r epa r at i o n eq u i p m en t

IDG – membrane air dryer

Type 1 5 10 20 30 50 60 75 100

2
Medium Air
Pressure range 0.3–0.85 MPa (3–8.5 bar) 0.3–1.0 MPa (3–10 bar)
Operating temperature –5 to 55 °C –5 to 50 °C
Dew point –20  °C –20, –15 °C –20, –15, –40 °C
Dew point indicator — Req. Standard

■  No power supply required  ■  Compact and lightweight design

■  Can be combined with SMC’s modular regulators and filters
■  Dew point –60 °C on request

Membrane air dryer – standard, dew point –20 °C, discharge 20% Membrane air dryer – low dew point, dew point –40 °C, discharge 25%
Part number Flow, OUT Connection Part number Flow, OUT Connection
IDG1-F02    10 ln/min 1/4 IDG30LA-F02   75 ln/min 1/4
IDG5-F01    50 ln/min 1/8 IDG30LA-F03   75 ln/min 3/8
IDG5-F02    50 ln/min 1/4 IDG50LA-F02 110 ln/min 1/4
IDG10-F02   100 ln/min 1/4 IDG50LA-F03 110 ln/min 3/8
IDG10-F03   100 ln/min 3/8 IDG60L-F03 170 ln/min 3/8
IDG20-F02   200 ln/min 1/4 IDG60L-F04 170 ln/min 1/2
IDG20-F03   200 ln/min 3/8 IDG75L-F04 240 ln/min 1/2
IDG30A-F02   300 ln/min 1/4 IDG100L-F04 300 ln/min 1/2
IDG30A-F03   300 ln/min 3/8
IDG50A-F02   500 ln/min 1/4 Membrane air dryer – standard with connection for
IDG50A-F03   500 ln/min 3/8 ­discharge flow, dew point –20 °C, discharge 20%
IDG60-F03   600 ln/min 3/8 Part number Flow, OUT Connection
IDG60-F04   601 ln/min 1/2 IDG1-F02-P    10 ln/min 1/4
IDG75-F04   750 ln/min 1/2 IDG5-F01-P    50 ln/min 1/8
IDG100-F04 1000 ln/min 1/2 IDG5-F02-P    50 ln/min 1/4
IDG10-F02-P   100 ln/min 1/4
Membrane air dryer – low discharge, dew point –15 °C, discharge 10% IDG10-F03-P   100 ln/min 3/8
Part number Flow, OUT Connection IDG20-F02-P   200 ln/min 1/4
IDG5H-F01    50 ln/min 1/8 IDG20-F03-P   200 ln/min 3/8
IDG5H-F02    50 ln/min 1/4 IDG30A-F02-P   300 ln/min 1/4
IDG10H-F02   100 ln/min 1/4 IDG30A-F03-P   300 ln/min 3/8
IDG10H-F03   100 ln/min 3/8 IDG50A-F02-P   500 ln/min 1/4
IDG20H-F02   200 ln/min 1/4 IDG50A-F03-P   500 ln/min 3/8
IDG20H-F03   200 ln/min 3/8 IDG60-F03-P   600 ln/min 3/8
IDG30HA-F02   300 ln/min 1/4 IDG60-F04-P   601 ln/min 1/2
IDG30HA-F03   300 ln/min 3/8 IDG75-F04-P   750 ln/min 1/2
IDG50HA-F02   500 ln/min 1/4 IDG100-F04-P 1000 ln/min 1/2
IDG50HA-F03   500 ln/min 3/8
IDG60H-F03   600 ln/min 3/8
IDG60H-F04   601 ln/min 1/2
IDG75H-F04   750 ln/min 1/2
IDG100H-F04 1000 ln/min 1/2

For connection between old and current series of SMC’s modular FRL, please contact SMC.

Facts
Dew Point: Atmospheric dew point.
Flow, OUT: Flow at standard operating conditions.
Discharge: Relationship between flow rate of leakage
flow and flow rate of supply at standard operating
conditions. Contact SMC for details.
Subject to changes

25
 Ai r pr epar ation equip me nt

IDFA – dryer
Supply pressure 0.15–1 MPa (1.5–10 bar); K versions: 0.15–1.6 MPa (1.5–16 bar)

2
Incoming air temperature 5 to 50 °C
Ambient air temperature 2 to 40 °C (relative humidity 85 % or less)
Voltage 230 V, 50 Hz

■  Modern design ensures a constant stable pressure dew point

and low power consumption  ■  Heat exchangers in stainless steel
gives long life combined with low pressure drop

Flow capacity
ISO8573.1 class 4 ISO8573.1 class 5 ISO8573.1 class 6
Type 3 °C dew point 7 °C dew point 10 °C dew point
IDFA3E-23
IDFA3E-23   12 m3/h   15 m3/h   17 m3/h
IDFA4E-23
IDFA4E-23   24 m3/h   31 m3/h   34 m3/h
IDFA6E-23-K
IDFA6E-23-K   36 m3/h   46 m3/h   50 m3/h
IDFA8E-23-K
IDFA8E-23-K   65 m3/h   83 m3/h   91 m3/h
IDFA11E-23-K
IDFA11E-23-K   80 m3/h 101 m3/h 112 m3/h
IDFA15E-23-K
IDFA15E-23-K 120 m3/h 152 m3/h 168 m3/h
IDFA22E-22-K
IDFA22E-22-K 182 m3/h 231 m3/h 254 m3/h
IDFA37E-37-K
IDFA37E-37-K 273 m3/h 347 m3/h 382 m3/h
IDFA55E-23
IDFA55E-23-L 390 m3/h 432 m3/h 510 m3/h
IDFA75E-23
IDFA75E-23-L 600 m3/h 720 m3/h 822 m3/h

AF – high flow air filter

Medium Compressed air
Degree of filtration 5 µm
Max. working pressure 1 MPa (10 bar)
Min. working pressure 0.1 MPa (1 bar)
Operating temperature 5 to 60 °C
Size 800 900
Connection G1 1/2 G2
Flow1 10000 ln/min 15000 ln/min
1. Flow at 7 bar and ΔP 0.02.

■  High flow  ■  Degree of filtration 5 µm

■  Ideal filter for supply lines

Air filter – with automatic drain Filter element

Part number Connection Part number For filter
AF811-F14 G1 1/2 11345-5B AF811
AF911-F20 G2 11352-5B AF911

Bowl – with automatic drain (spare part)

Part number
EAD34F
Subject to changes

26
 A i r p r epa r at i o n eq u i p m en t

SFD – clean air filter, in-line

Medium Air/nitrogen

2
Degree of filtration 0.01 µm
Working pressure 1.0 MPa (10 bar)
Operating temperature 5 to 45 °C

■  Suitable for sensitive air blow applications

Clean air filter

Part number Description Flow Note! Fixing brackets not included.
SFD100-C06 Filter in-line 0.01 µm   80 ln/min
SFD200-C08 Filter in-line 0.01 µm 300 ln/min
SFD100-F02 Filter in-line 0.01 µm 100 ln/min
SFD200-F02 Filter in-line 0.01 µm 500 ln/min

AMC – filter silencer

Medium Compressed air, lubricated or not lubricated
Degree of filtration 0.3 µm (99% oil removal)
Max. working pressure 1 MPa (10 bar)
Operating temperature 2 to 60 °C
Size 310 510 610 810 910
Connection R3/8 R3/4 R1 R1 1/2 R2
Recommended
300 ln/min 1000 ln/min 3000 ln/min 6000 ln/min 10000 ln/min
max. flow
■  Provides better working environment  ■  Silencer and oil separator

Filter silencer Filter element

Part number Connection Part number For filter
AMC310-03 R3/8 AMC-EL3 AMC310
AMC510-06 R3/4 AMC-EL5 AMC510
AMC610-10 R1 AMC-EL6 AMC610
AMC810-14 R1 1/2 AMC-EL8 AMC810
AMC910-20 R2 AMC-EL9 AMC910

Bracket
For cleanroom ­versions, Part number For filter
BE30 AMC310
contact SMC.
BE50 AMC510
BE60 AMC610
For AMC810 and -910 there is no bracket.
Subject to changes

27
 Ai r pr epar ation equip me nt

ARM5, -10 & -11

– compact manifold regulator

2 Medium
Max. working pressure
Secondary pressure
Operating temperature
Flow
Air
1.0 MPa (10 bar)
0.05–0.7 MPa (0.5–7.0 bar)
5 to 60 °C
ARM5: 200 ln/min; ARM10 & -11: 300 ln/min

■  Flexible design allows numerous combinations

■  Ideal in applications with centralized pressure regulation for different functions

Regulator – single mounting ARM10, top-

mounted handle
Part number Handle position Tube connect.
ARM5SA-06-A Front-mounted handle 4 mm
ARM5SA-08-A Front-mounted handle 6 mm1
ARM10-08BG Top-mounted handle 6 mm1 ARM5, front-
ARM10F1-08GPC Front-mounted handle 6 mm1 mounted
handle
1. Tube connection can easily be changed to 4 mm.

Tillbehör
Part number Type
136134 Mounting bracket1 ARM10
136133 Panel nut1 ARM10
GC3-10A-X2101 Pressure gauge ARM10 (0–1 MPa)
G14-8-JA Pressure gauge ARM5 (0–0.8 MPa) ARM11 ARM5, manifold mounting
1. Panel nut required for bracket. manifold
mounting

For block-mounted regulators with individual, or common supply a complete catalog is needed to determine version.
Contact SMC.

AR & XT13 – high flow regulator

AR425/ AR625/ AR825/ AR925/
Type
XT13-253 XT13-207 XT13-202 XT13-283
Medium Compressed air, lubricated or not lubricated
Degree of filtration 10 µm
Max. working pressure 1 MPa (10 bar)
Secondary pressure 0.05–0.85 MPa (0.5–8.5 bar)
Operating temperature 5 to 60 °C
Connection G1/2 G1 G1 1/2 G2
Max. flow 6000 ln/min 10000 ln/min 16000 ln/min 18000 ln/min

■  Internal pilot regulator provides accuracy  ■  Ideal for supply lines

Pressure regulator Mounting bracket

Part number Connection Part number For regulator
AR425-F04
EAR425-F04 G1/2 B24P AR425/XT13-253
AR625-F10
EAR625-F06 G 3/4 B25P AR625/XT13-207
AR625-F10
EAR625-F10 G1
AR825-F14
EAR825-F14 G1 1/2 Pressure gauge
AR925-F20
EAR925-F20 G2 Part number For regulator
AR425/625/825/925
Pilot operated pressure regulator G46-10-02
XT13-253/207/202/283
Part number Connection Pilot port
XT13-253-F04 G1/2 1/4
Subject to changes

XT13-207-F10 G1 1/4
XT13-202-F14 G1 1/2 1/4
XT13-283-F20 G2 1/4

28
 A i r p r epa r at i o n eq u i p m en t

ARJ – miniature regulator

Type ARJ1020 ARJ210 ARJ310

2
Medium Compressed air, lubricated or not lubricated
Degree of filtration 5 µm
Max. working pressure 0.8 MPa (8 bar)
Secondary 0.1–0.7 MPa 0.2–0.7 MPa 0.2–0.7 MPa
­pressure (1–7 bar) (2–7 bar) (2–7 bar)
Operating temperature 5 to 60 °C
Max. flow 200 ln/min 200 ln/min 500 ln/min
■  Compact  ■  Integrated push-in fitting (ARJ1020)

Miniature regulator Mounting bracket

Part number Connection IN Connection OUT Part number Series
ARJ1020F-M5-04 M5 Ø4 134856 ARJ310
ARJ1020F-M5-06 M5 Ø6
External R1/8, Pressure gauge
ARJ210-M5 M5
internal M5 Part number Series
External R1/8, G27-10-M5-X201 ARJ210
ARJ310F-01-04 Ø4
internal M5 G15-10-01 ARJ310
External R1/8,
ARJ310F-01-06 Ø6
internal M5
External R1/8,
ARJ310-01 1/8
internal M5

ARX – high pressure regulator

Type ARX20 ARX21
Medium Compressed air
Max. working pressure 2.0 MPa (20 bar)
Secondary pressure 0.05–0.85 MPa (0.5–8.5 bar) 0.05–0.3 MPa (0.5–3 bar)
Operating temperature –5 to 60 °C
Max. flow 1000 ln/min 400 ln/min

■  Supply pressure up to 2 MPa (20 bar)  ■  Very compact

■  Three alternative output ports  ■  Suitable regulator for small compressors

Pressure regulator Pressure gauge

Part number Connection Part number Connection
ARX20-F01 G1/8 G36-10-01 R1/8
ARX20-F02 G1/4 G46-10-02 R1/4
ARX20-F01P G1/8
ARX20-F02P G1/4 Mounting bracket Panel nut
ARX21-F01 G1/8 Part number Part number
ARX21-F02 G1/4 1348112 1348110A
ARX21-F02P G1/4
Suffix P means that nut for panel mounting is included.
Subject to changes

29
 Ai r pr epar ation equip me nt

ARP – precision regulator

Type ARP20 ARP30 ARP40

2
Medium Air
Degree of filtration 0.3 µm (microfilter) recommended
Working pressure 0.7 MPa (7 bar)
Operating temperature –5 to 60 °C
Flow 300 ln/min 600 ln/min 900 ln/min
Sensitivity 0.2% F.S.

■  Fits SMC’s modular adapters

■  Small leakage (less than 1 ln/min at 0.4 MPa)
■  Back-flow and digital pressure switch as accessories

Precision regulator – back-flow Mounting bracket – bracket with nut

Part number Secondary pressure Connection Part number For regulator
ARP20K-F02 0.005–0.4 MPa (0.05–4 bar) G1/4 ARP20P-270AS ARP20
ARP30K-F03 0.005–0.4 MPa (0.05–4 bar) G3/8 ARP30P-270AS ARP30
ARP40K-F04 0.005–0.4 MPa (0.05–4 bar) G1/2 ARP40P-270AS ARP40
ARP20K-F02-3 0.008–0.6 MPa (0.05–6 bar) G1/4
ARP30K-F03-3 0.008–0.6 MPa (0.05–6 bar) G3/8 Panel nut
ARP40K-F04-3 0.008–0.6 MPa (0.05–6 bar) G1/2 Part number For regulator
ARP20P-260S ARP20
ARP30P-260S ARP30
ARP40P-260S ARP40

Pressure gauge Digital pressure switch

Part number Type Pressure Part number Cable connection
G36-4-01 Round 0.4 MPa (4 bar) ISE35-N-65-LA Down
G36-7-01 Round 0.7 MPa (7 bar) ISE35-R-65-LA Up
GC3-4AS Built-in 0.4 MPa (4 bar)
GC3-7AS Built-in 0.7 MPa (7 bar)
ISE35-N ISE35-R

Subject to changes

30
 A i r p r epa r at i o n eq u i p m en t

IR1000, -2000 & -3000

– precision regulator
Type
Medium
Degree of filtration
Max. inlet pressure
Operating temperature
IR1000/1010/1020 IR2000/2010/2020
Compressed air, not lubricated
0.3 µm (microfilter)
1.0 MPa (10 bar)
–5 to 60 °C
IR3000/3010/3020

2
Max. flow 150/250/400 ln/min 550/600/900 ln/min 3000/4000/5000 ln/min
Sensitivity 0.2% F.S.

■  Very accurate  ■  Fits SMC’s modular FRL series

■  High exhaust capacity, good for balancing

Precision regulator IR1000 Mounting bracket

– with connection G1/8, fits FRL series 20
Part number For regulator
Part number Secondary pressure P36201023 IR1000
IR1000-F01 0.005–0.2 MPa (0.05–2 bar) P36202028 IR2000
IR1010-F01 0.01–0.4 MPa (0.1–4 bar) P362030-20
P36203018 IR3000
IR1020-F01 0.01–0.8 MPa (0.1–8 bar)
Pressure gauge
Precision regulator IR2000 Part number Conn. Series Pressure
– with connection G1/4, fits FRL series 30
G33-2-01 1/8 IR1000 0–0.2 MPa
Part number Secondary pressure G33-4-01 1/8 IR1000 0–0.4 MPa
IR2000-F02 0.005–0.2 MPa (0.05–2 bar) G33-10-01 1/8 IR1000 0–1.0 MPa
IR2010-F02 0.01–0.4 MPa (0.1–4 bar) G36-2-01 1/8 IR2000, 3000 0–0.2 MPa
IR2020-F02 0.01–0.8 MPa (0.1–8 bar) G36-4-01 1/8 IR2000, 3000 0–0.4 MPa
G36-10-01 1/8 IR2000, 3000 0–1.0 MPa
Precision regulator IR3000
– with connection G1/2, fits FRL series 40
Part number Secondary pressure
IR3000-F04 0.01–0.2 MPa (0.1–2 bar)
IR3010-F04 0.01–0.4 MPa (0.1–4 bar)
IR3020-F04 0.01–0.8 MPa (0.1–8 bar)

For connection between old and current series of SMC’s modular FRL, please contact SMC.
Subject to changes

31
 Ai r pr epar ation equip me nt

ITV1000, -2000 & -3000

– E/P converter

2 Type
Medium
Degree of filtration
Max. inlet pressure
ITV1030 ITV2030 ITV3030 ITV1050 ITV2050
Oil-free compressed air
5 µm (particle filter in combination with
­microfilter is recommended)
1.0 MPa (10 bar)
ITV3050

ITV1000

Min. inlet pressure Set pressure +0.1 MPa (1 bar)

Secondary pressure See below
Flow (ln/min) 150 1 1000 1 3000 1 250 2 1500 2 5800 2
Operating temperature 0 to 50 °C
G1/4, G3/8, G1/2, G1/4, G3/8, G1/2,
Connection
G1/8 G1/2 G1/2 G1/8 G1/2 G1/2
Monitor signal 0–5 V (4–20 mA or digital PNP/NPN on request)
1. At supply pressure 7 bar and secondary pressure 3 bar.
2. At supply pressure 10 bar and secondary pressure 6 bar.
ITV2000
■  Fast, accurate – ideal for process applications
■  Ability to adjust the zero, span and sensitivity
■  Analog or digital version ITV3000

E/P converter ITV1000 E/P converter

Input 0–10 V, output 1–5 V Input 0–10 V, output PNP
Part number Secondary pressure Part number Secondary pressure
ITV1030-31F2N-Q 0.005 to 0.5 MPa ITV1050-33F2N-Q 0.005 to 0.9 MPa
ITV1050-31F2N-Q 0.005 to 0.9 MPa ITV2050-33F3N-Q 0.005 to 0.9 MPa
Input 4–20 mA, output 1–5 V ITV3050-33F4N-Q 0.005 to 0.9 MPa
Part number Secondary pressure Input 4–20 mA, output PNP
ITV1030-01F2N-Q 0.005 to 0.5 MPa Part number Secondary pressure
ITV1050-01F2N-Q 0.005 to 0.9 MPa ITV1050-03F2N-Q 0.005 to 0.9 MPa
ITV2050-03F3N-Q 0.005 to 0.9 MPa
E/P converter ITV2000 ITV3050-03F4N-Q 0.005 to 0.9 MPa
Input 0–10 V, output 1–5 V
Part number Secondary pressure E/P converter – digitally controlled
ITV2010-31F3N-Q 0.005 to 0.1 MPa Part number Secondary pressure
ITV2030-31F3N-Q 0.005 to 0.5 MPa ITV1050-40F2N-Q 0.005 to 0.9 MPa
ITV2050-31F3N-Q 0.005 to 0.9 MPa ITV2050-40F3N-Q 0.005 to 0.9 MPa
Input 4–20 mA, output 1–5 V ITV3050-40F4N-Q 0.005 to 0.9 MPa
Part number Secondary pressure Four free programmable pressure levels can be choosen by two inputs.

ITV2010-01F3N-Q 0.005 to 0.1 MPa E/P converter ITV2090 – for vacuum

ITV2030-01F3N-Q 0.005 to 0.5 MPa Input 0–10 V, power supply 24 VDC
ITV2050-01F3N-Q 0.005 to 0.9 MPa
Part number Secondary pressure
E/P converter ITV3000 ITV2090-31F2N5-Q –1.3 to –80 kPa
Input 0–10 V, output 1–5 V
E/P converter ITV3000-X15 – for high pressure
Part number Secondary pressure Input 0–10 V, power supply 24 VDC, max. inlet pressure 1.2 MPa
ITV3030-31F4N-Q 0.005 to 0.5 MPa
Part number Secondary pressure
ITV3050-31F4N-Q 0.005 to 0.9 MPa
ITV3050-31F4N-X15 0.05 to 1 MPa
Input 4–20 mA, output 1–5 V
ITV3050-33F4N-X15 0.05 to 1 MPa
Part number Secondary pressure
ITV3030-01F4N-Q 0.005 to 0.5 MPa
ITV3050-01F4N-Q 0.005 to 0.9 MPa

Connecting cable Bracket

Part number Type Part number Type
P398010-12 Straight 3 m cable P3020114 Foot bracket
P398010-13 Angled 3 m cable INI-398-0-6 L-bracket
P398010-13-5 Angled 5 m cable
Bracket and cable are ordered separately.
Subject to changes

P398010-13-10 Angled 10 m cable

32
 A i r p r epa r at i o n eq u i p m en t

ITV0000 – E/P converter

Type ITV0010 ITV0030 ITV0050

2
Medium Air1, degree of filtration min. 5 µm, oil-free air
Max. inlet pressure 0.2 MPa (2 bar) 1.1 MPa (10 bar)
Min. inlet pressure Secondary pressure +0.1 MPa
Max. flow 3.5 ln/min 6 ln/min 6 ln/min
Operating temperature 0 to 50 °C
Connection Single unit 4 mm (ramp 6 mm and 4 mm)
Monitor signal Analog 1–5 V
Vikt 100 g or less
1. If the medium contains large amounts of water, oil aerosols or compressor oil it can cause
malfunction. Contact SMC for selecting the appropriate filter.

■  Fast, accurate E/P converters suitable for applications requiring

Manifold mounting
compact size and low flow rates

E/P converter – single mounting Connecting cable

Input 0–10 V, power supply 24 VDC Part number Type
Part number Secondary pressure M8-4DSX3MG4
WX-84SL-20 Straight
ITV0010-3N-Q 0.001 to 0.1 MPa ELWIKA-KV4408PVC0252M
WX-84S-20 Angled
ITV0030-3N-Q 0.001 to 0.5 MPa
ITV0050-3N-Q 0.001 to 0.9 MPa Foot bracket – single unit
Input 4–20 mA, power supply 24 VDC Part number Type
Part number Secondary pressure P39800022 Flat
ITV0010-0N-Q 0.001 to 0.1 MPa P39800023 L-bracket
ITV0030-0N-Q 0.001 to 0.5 MPa
ITV0050-0N-Q 0.001 to 0.9 MPa
Input 0–5 V or 0–20 mA on request.

E/P converter – manifold mounting, contact SMC

Subject to changes

33
 Ai r pr epar ation equip me nt

AN – silencer
Medium Compressed air, lubricated or not lubricated

2
Max. working pressure 1.0 MPa (10 bar)
Operating temperature 5 to 60 °C

■  Effective air silencing, 30 dB (A)

■  Size 1/4" and larger has damping elements in polyacetal – no risk of accidents

Silencer Silencer
Sintered bronze Push-in connection
Part number Silencing Conn. Flow Part number Silencing Conn. Flow
AN120-M3 11 dB (A) M3   0.07 m3/min AN10-C06 25 dB (A)   6 mm   0.8 m3/min
AN120-M5 18 dB (A) M5   0.27 m3/min AN15-C08 25 dB (A)   8 mm 1 m3/min
AN101-01 13 dB (A) R1/8 0.5 m3/min AN15-C08 30 dB (A)   8 mm 3 m3/min
AN110-01 21 dB (A) R1/8 0.5 m3/min AN20-C10 30 dB (A) 10 mm 5 m3/min
Standard AN30-C12 30 dB (A) 12 mm 5 m3/min
Part number Silencing Conn. Flow Large noise reduction effect
AN10-01 30 dB (A) R1/8    0.8 m3/min Part number Silencing Conn. Flow
AN20-02 30 dB (A) R1/4   3 m3/min ANB1-01 38 dB (A) R1/8    1.2 m3/min
AN30-03 30 dB (A) R3/8   5 m3/min ANB1-02 38 dB (A) R1/4    2.7 m3/min
AN40-04 30 dB (A) R1/2   8 m3/min ANB1-03 38 dB (A) R3/8    3.8 m3/min
AN500-06 30 dB (A) R3/4 12 m3/min ANB1-04 38 dB (A) R1/2   7 m3/min
AN600-10 30 dB (A) R1 20 m3/min ANB1-06 38 dB (A) R3/4 12 m3/min
AN700-12 30 dB (A) R1 1/4 30 m3/min ANB1-10 38 dB (A) R1 20 m3/min
AN800-14 30 dB (A) R1 1/2 50 m3/min ANB1-12 38 dB (A) R1 1/4 32 m3/min
AN900-20 30 dB (A) R2 80 m3/min ANB1-14 38 dB (A) R1 1/2 45 m3/min
Compact ANA1-01 40 dB (A) R1/8    0.8 m3/min
Part number Silencing Conn. Flow ANA1-02 40 dB (A) R1/4    1.2 m3/min
AN10-01 25 dB (A) R1/8   0.8 m3/min ANA1-03 40 dB (A) R3/8    2.7 m3/min
AN15-02 25 dB (A) R1/4 1 m3/min ANA1-04 40 dB (A) R1/2    4.5 m3/min
AN30-03 25 dB (A) R3/8 2 m3/min ANA1-06 40 dB (A) R3/4   7 m3/min
AN40-04 25 dB (A) R1/2 4 m3/min ANA1-10 40 dB (A) R1 12 m3/min
ANA1-12 40 dB (A) R1 1/4 20 m3/min
ANA1-14 40 dB (A) R1 1/2 32 m3/min
ANA1-20 40 dB (A) R2 45 m3/min
The above stated flow refers to recommended flow
at 0.5 MPa (5 bar).

Series 25 – silencer
Medium Air
Working pressure 1 MPa (10 bar)
Operating temperature 5 to 60 °C

■  Exhaust only in one direction – prevents the spread

of oil mist and noise  ■  Reduces the risk of clogging

Silencer series 25
Conn. Recommended Dimensions (mm)
Part number port R max. flow A B D
2504-002 1/4   2200 ln/min 62 30 24
2505-003 3/8   3000 ln/min 64 30 24
2506-004 1/2   4000 ln/min 68 30 24
2507-006 3/4   8000 ln/min   88.5 48 35 For metering silencer
2508-010 1 10000 ln/min   97.5 60 41 ASN, see chapter 3.
Subject to changes

34
 A i r p r epa r at i o n eq u i p m en t

VBA – pressure booster

Modell VBA10A VBA11A VBA20A VBA40A VBA43A

2
Medium Compressed air, not lubricated1
Degree of filtration Microfilter 0.03 µm (SMC’s AM or AFM series)
Connection G1/4 G3/8 G1/2
Inlet pressure 0.1–1 MPa (1–10 bar)
0.2–1.6 MPa
Secondary pressure 0.2–2 MPa (2–20 bar) 0.2–1 MPa (2–10 bar)
(2–16 bar)
Max. pressure boost 2:1 4:1
Flow 1:1 400 ln/min 100 ln/min 1000 ln/min 1900 ln/min 2300 ln/min
1. If components after the pressure booster require lubrication, lubricate after pressure booster.

■  Raises main line pressure to the preset value  ■  Requires no wiring

■  Ability to reduce the main line pressure

Pressure booster – including pressure gauge

Part number Connection
VBA10A-F02GN G1/4
VBA11A-F02GN G1/4
VBA20A-F03GN G3/8
VBA40A-F04GN G1/2
VBA43A-F04GN
VBA43A-F04GS G1/2

Pressure tank – designed for booster VBA

Part number Volume Pressure
VBAT05AF-SV-Q  5l
2 MPa (20 bar)
VBAT10AF-SV-Q 10 l
VBAT20AF-RV-Q 20 l
1 MPa (10 bar)
VBAT38AF-RV-Q 38 l
Pressure booster ordered separately.

Service set
Part number Fits
KT-VBA10A-1 VBA10A
KT-VBA11A-1
KT-VBA11A-20 VBA11A
KT-VBA20A-1 VBA20A
KT-VBA40A-1 VBA40A
KT-VBA43A-1 VBA43A

Pressure gauge – spare part

Part number Fits
G27-20-01 VBA10A, VBA11A, VBA43A
G36-10-01 VBA20A, VBA40A

Function
Pressure booster VBA raises main line pressure to an
adjustable value. A built-in pressure regulator ensures
constant output pressure. The time for filling a tank with
increased pressure can be reduced by parallel operation
with non-return valve. Pressure booster is only activated
when tank pressure does not corresponds to main line Pilot operated and ATEX versions available on request.
pressure.
Subject to changes

35
 Ai r pr epar ation equip me nt

IDK – moisture control tube

Type IDK02 IDK04 IDK06

2
Medium Compressed air
Max. working pressure 0.7 MPa (7 bar)
Operating temperature 0 till 40 °C
Ambient Indoors, 0 to 75% relative humidity
Min. bending radius 10 mm 20 mm 40 mm
Accessories 4 inner sleeves (supplied fitted in the tube)
Colour Transparent (changing to brown over time)
Suitable fittings KQ2, KJ
Materials Fluoropolymer

■  Diffuses water wapour to the outside of tube (using grippers,

cylinders and rotary actuators with small volumes
increases the risk of condensation in the tubing)
■  Fewer production stops  ■  Increases life time

Moisture control tube – 2 per pack

Tube diameter Length
Part number Outer Inner Free Total
IDK02-100 100 mm 120 mm
2 mm 1.2 mm
IDK02-200 200 mm 220 mm
IDK04-100 100 mm 140 mm
4 mm 2.5 mm
IDK04-200 200 mm 240 mm
IDK06-100 100 mm 140 mm
6 mm 4 mm
IDK06-200 200 mm 240 mm

Subject to changes

36