Scribd
Upload
142 views1 page

Ford Ranger Body & Equipment Manual11

The document provides instructions for jacking up a Ford Ranger vehicle. It notes that the jack must be assembled and fixed appropriately to the body for safety and accessibility. It warns to always position the vehicle on a hard, level surface and chock the wheels when jacking. The spare wheel winch is located above the spare wheel and can be accessed from the rear of the chassis frame. Reinforcements may be needed at jacking points to maintain the integrity of the original body structure.

Uploaded by

Hennie Stander
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
142 views1 page

Ford Ranger Body & Equipment Manual11

The document provides instructions for jacking up a Ford Ranger vehicle. It notes that the jack must be assembled and fixed appropriately to the body for safety and accessibility. It warns to always position the vehicle on a hard, level surface and chock the wheels when jacking. The spare wheel winch is located above the spare wheel and can be accessed from the rear of the chassis frame. Reinforcements may be needed at jacking points to maintain the integrity of the original body structure.

Uploaded by

Hennie Stander
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

BACK TO CHAPTER INDEX FORD RANGER 2011.

5MY BODY AND EQUIPMENT MOUNTING MANUAL


TO MODEL INDEX

1.6 Jacking
WARNINGS: The spare wheel winch is located above the
spare wheel and can be accessed from the rear
Always position the vehicle on a hard
of the chassis frame.
level surface. If the vehicle must be
jacked up on a soft surface use load The jack must be assembled and fixed
spreading blocks under the jack. appropriately to the body to ensure safety,
Always chock the wheel diagonally durability and accessibility.
opposite the jacking point. Failure to
follow these instructions may result
in personal injury.
Do not get under a vehicle that is
supported by a jack.
This jack is only intended for
changing wheels.

CAUTIONS:
It is important that only the correct
jacking and support locations are
used at all times. E140512

Make sure that access to the spare


1. Ensure screwthread is adequately lubricated
wheel is maintained when converting
before use.
the vehicle or relocating the spare
wheel. 2. The jack should be used on level firm ground
wherever possible.
NOTE: When using the vehicle jack, refer to the
3. Apply park brake fully before lifting the vehicle.
owner guide for correct operating instructions.
4. It is recommended that the wheels of the
NOTE: Make sure that reinforcements are vehicle should be chocked, and no person
installed to maintain the integrity of the original should remain in a vehicle being jacked.
body structure for/at jacking points.
5. No person should place any portion of their
NOTE: Any modifications to the vehicle must body under a vehicle that is supported by a
be noted in the owner's handbook or new jack.
descriptive literature included with the owner's
documentation.

Date of Publication: 05/2011


FordRanger 2011.5

You might also like