Scribd
Upload
87 views

Rs110 (Ds03) RPM Probe

Uploaded by

ANDRES DEGADO
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
87 views

Rs110 (Ds03) RPM Probe

Uploaded by

ANDRES DEGADO
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

HySense RS 110

Rotational speed sensor with reflection tag detection

Rotational speed measurement for many applications


The rotational speed sensor RS 110 uses pulsating red light (LED) reflected by a spe-
cial tag at the rotating target. By using a polarisation filter, only the reflected light im-
pulses are evaluated, disturbing reflections (e.g. unevenness of the surface, bright
metal parts, keyways or high-contrast areas) are not detected. This achieves a reliab-
le rotational speed measurement from distances between 50 mm and 4 m*.
25 reflection tags are included. Enter the number of used reflection tags as calibrati-
on value into the measuring instrument.

RS
Dimensions Applications
17,6 22 • Recording the hydraulic efficiency of pumps
• Rotational speed measurement of fans of hydraulic cooling devices
39

Qualities
75,5

Measuring principle auto-collimation


67

Light source power LED with visible red light


Supply voltage Ub 10 ... 30 VDC
Ripple < 5 Vss
11,4

Current consumption < 30 mA


Output current max. < 100 mA
33,5 Response time 500 μs
Switching sequence 1,000 Hz
Range 50 ... 500 mm (with standard reflectors)*
Dimensions magnetic holder (option) Protection type IP 67
80 Signal repetition frequency max. 500 Hz
Output signal frequency (rectangular signal) / 4 ... 20 mA
41 Electrical measuring connector 5 pole device connector, M16 x 0.75
Environmental temperature -40 ... +60 °C
Storage temperature -40 ... +75 °C
Weight 141 g

Pin assignment RS 110 (frequency) RS 110 (4 ... 20 mA)


~ 200

Pin 1 = signal + Pin 1 = signal +


3 Pin 2 = – Ub / GND Pin 2 = signal – / GND
4 2
Pin 3 = + Ub Pin 3 = + Ub
5 1 Pin 4 = free Pin 4 = free
Pin 5 = free Pin 5 = free
14

Ø 63
Measuring range Weight Order number
g
Frequency 140 3130-02-01.00
4 ... 20 mA 320 3130-06-01.00

* other reflectors and ranges on request


For accessories see page 75

© Hydrotechnik GmbH • Technical changes and errors reserved • All rights reserved 61

You might also like