Scribd
Upload
155 views1 page

Bgas 3.2 Maths Exercise WFT Calculations WFT 100 X DFT VS: Page 1 of 1

This document contains 5 math exercises calculating wet film thickness (WFT) from dry film thickness (DFT) using the formula WFT = 100 x DFT/Volume Solids (VS) for different paints with varying VS percentages. The exercises find the WFT for DFTs of 45μm, 60μm, and 45μm using paints of 56%, 40%, and 38% VS respectively. It also gives the DFT of 55μm and VS of 55% and asks for the corresponding WFT, which is calculated as 100μm. Finally, it asks for the WFT needed for a DFT of 65μm using a paint of 49% VS, which is 132.65

Uploaded by

Bayu Falen
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as ODT, PDF, TXT or read online on Scribd
155 views1 page

Bgas 3.2 Maths Exercise WFT Calculations WFT 100 X DFT VS: Page 1 of 1

This document contains 5 math exercises calculating wet film thickness (WFT) from dry film thickness (DFT) using the formula WFT = 100 x DFT/Volume Solids (VS) for different paints with varying VS percentages. The exercises find the WFT for DFTs of 45μm, 60μm, and 45μm using paints of 56%, 40%, and 38% VS respectively. It also gives the DFT of 55μm and VS of 55% and asks for the corresponding WFT, which is calculated as 100μm. Finally, it asks for the WFT needed for a DFT of 65μm using a paint of 49% VS, which is 132.65

Uploaded by

Bayu Falen
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as ODT, PDF, TXT or read online on Scribd
You are on page 1/ 1

Page 1 of 1

BGas 3.2 Maths Exercise

WFT Calculations WFT = 100 X DFT


VS

1. What WFT would need to be applied to give a DFT of 45µm using a paint
of 56% VS
100 X 45 = 80.36µm
56

2. What WFT would need to be applied to give a DFT of 60µm using a paint
of 40% VS
100 X 60 = 150µm
40

3. A paint of 38% VS was used to give a DFT of 45µm. What would be the WFT
100 X 45 = 118.42µm
38

4. A DFT of 55µm was obtained from a paint of 55% VS. What was the applied
WFT
100 X 55 = 100µm
55

5. What WFT would be applied to leave a DFT of 65µm using a paint of 49% VS
100 X 65 = 132.65µm
49

You might also like