IEC Standard for Power Transmission and Distribution lines
IEC 60050-466 (1990-10)
International Electrotechnical Vocabulary. Chapter 466: Overhead lines
IEC 60055-1 (1997-05)
Paper-insulated metal-sheathed cables for rated voltages up to 18/30 kV (with copper or
aluminium conductors and excluding gas-pressure and oil-filled cables) - Part 1: Tests on
cables and their accessories
IEC 60104 (1987-12)
Aluminium-magnesium-silicon alloy wire for overhead line conductors
IEC 60105 (1958-01)
Recommendation for commercial-purity aluminium busbar material
IEC 60114 (1959-01)
Recommendation for heat-treated aluminium alloy busbar material of the aluminium-
magnesium-silicon type
IEC 60120 (1984-01)
Dimensions of ball and socket couplings of string insulator units
IEC 60121 (1960-01)
Recommendation for commercial annealed aluminium electrical conductor wire
IEC 60305 (1995-12)
Insulators for overhead lines with a nominal voltage above 1000 V - Ceramic or glass
insulator units for a.c. systems - Characteristics of insulator units of the cap and pin type
IEC 60353 (1989-11)
Line traps for a.c. power systems
IEC 60372 (1984-01)
Locking devices for ball and socket couplings of string insulator units - Dimensions and
tests
IEC 60372-am1 (1991-09)
Amendment 1 - Locking devices for ball and socket couplings of string insulator units -
Dimensions and tests
IEC 60372-am2 (2003-05)
Amendment 2 - Locking devices for ball and socket couplings of string insulator units -
Dimensions and tests
IEC 60383-1 (1993-04)
Insulators for overhead lines with a nominal voltage above 1000 V - Part 1: Ceramic or
glass insulator units for a.c. systems - Definitions, test methods and acceptance criteria
IEC 60383-2 (1993-04)
Insulators for overhead lines with a nominal voltage above 1000 V - Part 2: Insulator
strings and insulator sets for a.c. systems - Definitions, test methods and acceptance
criteria
IEC 60433 (1998-08)
Insulators for overhead lines with a nominal voltage above 1 000 V - Ceramic insulators
for a.c. systems - Characteristics of insulator units of the long rod type
IEC 60468 (1974-01)
Method of measurement of resistivity of metallic materials
IEC 60471 (1977-01)
Dimensions of clevis and tongue couplings of string insulator units
IEC 60471-am1 (1980-01)
Amendment 1 - Dimensions of clevis and tongue couplings of string insulator units
IEC 60481 (1974-01)
Coupling devices for power line carrier systems
IEC/TR 60575 (1977-01)
Thermal-mechanical performance test and mechanical performance test on string
insulator units
IEC 60652 (2002-06)
Loading tests on overhead line structures
IEC/TR 60663 (1980-01)
Planning of (single-sideband) power line carrier systems
IEC 60720 (1981-01)
Characteristics of line post insulators
IEC 60743 (2001-11)
Live working - Terminology for tools, equipment and devices
IEC 60781 (1989-01)
Application guide for calculation of short-circuit currents in low-voltage radial systems
IEC/TR 60797 (1984-01)
Residual strength of string insulator units of glass or ceramic material for overhead lines
after mechanical damage of the dielectric
IEC 60826 (2003-10)
Design criteria of overhead transmission lines
IEC 60832 (1988-04)
Insulating poles (insulating sticks) and universal tool attachments (fittings) for live
working
IEC 60834-1 (1999-10)
Teleprotection equipment of power systems - Performance and testing - Part 1: Command
systems
IEC 60834-2 (1993-06)
Performance and testing of teleprotection equipment of power systems - Part 2: Analogue
comparison systems
IEC 60855 (1985-01)
Insulating foam-filled tubes and solid rods for live working
IEC 60865-1 (1993-10)
Short-circuit currents - Calculation of effects - Part 1: Definitions and calculation
methods
IEC/TR2 60865-2 (1994-06)
Short-circuit currents - Calculation of effects - Part 2: Examples of calculation
IEC 60888 (1987-12)
Zinc-coated steel wires for stranded conductors
IEC 60889 (1987-11)
Hard-drawn aluminium wire for overhead line conductors
IEC 60900 (2004-01)
Live working - Hand tools for use up to 1000 V a.c. and 1500 V d.c.
IEC 60903 (2002-08)
Live working - Gloves of insulating material
IEC 60903 Corr.1 (2003-02)
Corrigendum 1 - Live working - Gloves of insulating material
IEC 60909-0 (2001-07)
Short-circuit currents in three-phase a.c. systems - Part 0: Calculation of currents
IEC/TR3 60909-2 (1992-09)
Electrical equipment - Data for short-circuit current calculations in accordance with IEC
909 (1988)
IEC 60909-3 (2003-09)
Short-circuit currents in three-phase a.c. systems - Part 3: Currents during two separate
simultaneous line-to-earth short circuits and partial short-circuit currents flowing through
earth
IEC/TR 60909-4 (2000-07)
Short-circuit currents in three-phase a.c. systems - Part 4: Examples for the calculation of
short-circuit currents
IEC 60984-am1 (2002-05)
Amendment 1 - Sleeves of insulating material for live working
IEC 61057 (1991-06)
Aerial devices with insulating boom used for live working
IEC/TR2 61085 (1992-04)
General considerations for telecommunication services for electric power systems
IEC 61089 (1991-06)
Round wire concentric lay overhead electrical stranded conductors
IEC 61089-am1 (1997-05)
Amendment 1 - Round wire concentric lay overhead electrical stranded conductors
IEC 61111-am1 (2002-05)
Amendment 1 - Matting of insulating material for electrical purposes
IEC 61112 (2002-06) Ed. 1.1 Consolidated Edition
Blankets of insulating material for electrical purposes
IEC 61112-am1 (2002-05)
Amendment 1 - Blankets of insulating material for electrical purposes
IEC/TR2 61211 (1994-06)
Insulators of ceramic material or glass for overhead lines with a nominal voltage greater
than 1000 V - Puncture testing
IEC 61219 (1993-10)
Live working - Earthing or earthing and short-circuiting equipment using lances as a
short-circuiting device - Lance earthing
IEC 61229-am2 (2002-05)
Amendment 2 - Rigid protective covers for live working on a.c. installations
IEC 61230 (1993-09)
Live working - Portable equipment for earthing or earthing and short-circuiting
IEC 61232 (1993-06)
Aluminium-clad steel wires for electrical purposes
IEC 61234-2 (1997-09)
Electrical insulating materials - Methods of test for the hydrolytic stability - Part 2:
Moulded thermosets
IEC 61235 (1993-09)
Live working - Insulating hollow tubes for electrical purposes
IEC 61236 (1993-08)
Saddles, pole clamps (stick clamps) and accessories for live working
IEC 61243-2-am1 (1999-10)
Amendment 1 - Live working - Voltage detectors - Part 2: Resistive type to be used for
voltages of 1 kV to 36 kV a.c.
IEC 61243-3 (1998-10)
Live working - Voltage detectors - Part 3: Two-pole low-voltage type
IEC 61243-5 (1997-06)
Live working - Voltage detectors - Part 5: Voltage detecting systems (VDS)
IEC 61284 (1997-09)
Overhead lines - Requirements and tests for fittings
IEC 61325 (1995-03)
Insulators for overhead lines with a nominal voltage above 1000 V - Ceramic or glass
insulator units for d.c. systems - Definitions, test methods and acceptance criteria
IEC/TR 61328 (2003-03)
Live working - Guidelines for the installation of transmission line conductors and
earthwires - Stringing equipment and accessory items
IEC/TR3 61334-1-1 (1995-11)
Distribution automation using distribution line carrier systems - Part 1: General
considerations - Section 1: Distribution automation system architecture
IEC/TR3 61334-1-4 (1995-11)
Distribution automation using distribution line carrier systems - Part 1: General
considerations - Section 4: Identification of data transmission parameters concerning
medium and low-voltage distribution mains
IEC 61334-3-1 (1998-11)
Distribution automation using distribution line carrier systems - Part 3-1: Mains
signalling requirements - Frequency bands and output levels
IEC 61334-3-21 (1996-03)
Distribution automation using distribution line carrier systems - Part 3: Mains signalling
requirements - Section 21: MV phase-to-phase isolated capacitive coupling device
IEC 61334-3-22 (2001-01)
Distribution automation using distribution line carrier systems - Part 3-22: Mains
signalling requirements - MV phase-to-earth and screen-to-earth intrusive coupling
devices
IEC 61334-4-1 (1996-07)
Distribution automation using distribution line carrier systems - Part 4: Data
communication protocols - Section 1: Reference model of the communication system
IEC 61334-4-32 (1996-09)
Distribution automation using distribution line carrier systems - Part 4: Data
communication protocols - Section 32: Data link layer - Logical link control (LLC)
IEC 61334-4-33 (1998-07)
Distribution automation using distribution line carrier systems - Part 4-33: Data
communication protocols - Data link layer - Connection oriented protocol
IEC 61334-4-41 (1996-08)
Distribution automation using distribution line carrier systems - Part 4: Data
communication protocols - Section 41: Application protocol - Distribution line message
specification
IEC 61334-4-42 (1996-10)
Distribution automation using distribution line carrier systems - Part 4: Data
communication protocols - Section 42: Application protocols - Application layer
IEC 61334-4-61 (1998-07)
Distribution automation using distribution line carrier systems - Part 4-61: Data
communication protocols - Network layer - Connectionless protocol
IEC/TR2 61334-5-2 (1998-05)
Distribution automation using distribution line carrier systems - Part 5-2: Lower layer
profiles - Frequency shift keying (FSK) profile
IEC 61334-6 (2000-06)
Distribution automation using distribution line carrier systems - Part 6: A-XDR encoding
rule
IEC 61395 (1998-03)
Overhead electrical conductors - Creep test procedures for stranded conductors
IEC 61466-1 (1997-02)
Composite string insulator units for overhead lines with a nominal voltage greater than
1000 V - Part 1: Standard strength classes and end fittings
IEC 61466-2 (2002-02) Ed. 1.1 Consolidated Edition
Composite string insulator units for overhead lines with a nominal voltage greater than 1
000 V - Part 2: Dimensional and electrical characteristics
IEC 61466-2-am1 (2002-01)
Amendment 1 - Composite string insulator units for overhead lines with a nominal
voltage greater than 1 000 V - Part 2: Dimensional and electrical characteristics
IEC/TR2 61467 (1997-02)
Insulators for overhead lines with a nominal voltage above 1000 V - A.C. power arc tests
on insulator sets
IEC 61472 (1998-11)
Live working - Minimum approach distances - Method of calculation
IEC 61477 (2002-06) Ed. 1.1 Consolidated Edition
Live working - Minimum requirements for the utilization of tools, devices and equipment
IEC 61477-am1 (2002-05)
Amendment 1 - Live working - Minimum requirements for the utilization of tools,
devices and equipment
IEC 61479 (2002-06) Ed. 1.1 Consolidated Edition
Live working - Flexible conductor covers (line hoses) of insulating material
IEC 61479-am1 (2002-05)
Amendment 1 - Live working - Flexible conductor covers (line hoses) of insulating
material
IEC 61481 (2002-06) Ed. 1.1 Consolidated Edition
Live working - Portable phase comparators for use on voltages from 1 kV to 36 kV a.c.
IEC 61481-am1 (2002-05)
Amendment 1 - Live working - Portable phase comparators for use on voltages from 1
kV to 36 kV a.c.
IEC 61481-am2 (2004-04)
Amendment 2 - Live working - Portable phase comparators for use on voltages from 1
kV to 36 kV a.c.
IEC/TR3 61597 (1995-05)
Overhead electrical conductors - Calculation methods for stranded bare conductors
IEC 61773 (1996-11)
Overhead lines - Testing of foundations for structures
IEC/TR2 61774 (1997-08)
Overhead lines - Meteorological data for assessing climatic loads
IEC/TS 61813 (2000-10)
Live working - Care, maintenance and in-service testing of aerial devices with insulating
booms
IEC 61854 (1998-09)
Overhead lines - Requirements and tests for spacers
IEC 61865 (2001-07)
Overhead lines - Calculation of the electrical component of distance between live parts
and obstacles - Method of calculation
IEC 61897 (1998-09)
Overhead lines - Requirements and tests for Stockbridge type aeolian vibration dampers
IEC/TR 61911 (2003-02)
Live working - Guidelines for installation of distribution line conductors - Stringing
equipment and accessory items
IEC 61952 (2002-07)
Insulators for overhead lines - Composite line post insulators for a.c. with a nominal
voltage greater than 1000 V
IEC 62193 (2003-05)
Live working - Telescopic sticks and telescopic measuring sticks
IEC 62219 (2002-02)
Overhead electrical conductors - Formed wire, concentric lay, stranded conductors
Web page generated: 27 May 2004
