Rockwell Configuration & Diagnostic
Software
SafeZone Operational status (COM5)
Rockwell Configuration & Diagnostic Software
Contents
1. Operational status SafeZone from 21/01/2019, 06:59.......................................................... 3
1.1. Version information......................................................................................................................... 3
1.2. General information........................................................................................................................ 3
1.3. Operating data................................................................................................................................ 3
1.4. Status LEDs.................................................................................................................................... 3
1.5. Device status.................................................................................................................................. 3
1.6. Control inputs................................................................................................................................. 4
1.7. Outputs........................................................................................................................................... 4
1.8. Error................................................................................................................................................ 4
1.9. Alarm detection............................................................................................................................... 5
Page 2
Rockwell Configuration & Diagnostic Software
1. Operational status SafeZone from 21/01/2019, 06:59
SafeZone Laser scanner
1.1. Version information
Version number SCD 3.0.1.9
Software version DLL 3.0.1.9
Created with SCD 3.0.1
1.2. General information
Type code 442L-SFZNMZ B
Device name SafeZone
Serial number (Scanner) 17410006
Serial number (I/O module) 17120032
Serial number (System plug) 18233182
Software version (Counter) 00.35
Software version (Controller) 02.61
Software version (Interface ) 01.03
Sensor head Medium Range (5,0 m)
I/O module Multizone
Jumper in the system plug not detected
Configuration date 21/01/2019 / 06:56
Safety Configuration ID (SCID) 0x06D8
1.3. Operating data
Operating mode Wait (for valid inputs)
Operational status OK
Active interface External serial interface
1.4. Status LEDs
Display
1.5. Device status
OSSD status Red
Reset OK
Page 3
Rockwell Configuration & Diagnostic Software
Contamination OK
Warning field Warning field free
1.6. Control inputs
A1 Low
A2 Low
B1 Low
B2 Low
C1 Low
C2 Low
D1 Low
D2 Low
Input Reset Low
External device monitoring input High
Velocity 1 0 cm/s
Velocity 2 0 cm/s
1.7. Outputs
Status of the OSSDs Low
Status Warning field output Low
Status Reset Required High
Status error/contamination High
1.8. Error
Error 1
Info message [0x0000] | 0 | 0 | Undefined | No error/
information.
Info 0 [0x0000], 0 [0x0000], 0 [0x0000], 0
[0x0000], 0 [0x0000], 0 [0x0000]
Error 2
Info message [0x0000] | 0 | 0 | Undefined | No error/
information.
Info 0 [0x0000], 0 [0x0000], 0 [0x0000], 0
[0x0000], 0 [0x0000], 0 [0x0000]
Error 3
Info message [0x0000] | 0 | 0 | Undefined | No error/
information.
Info 0 [0x0000], 0 [0x0000], 0 [0x0000], 0
[0x0000], 0 [0x0000], 0 [0x0000]
Error 4
Info message [0x0000] | 0 | 0 | Undefined | No error/
information.
Page 4
Rockwell Configuration & Diagnostic Software
Info 0 [0x0000], 0 [0x0000], 0 [0x0000], 0
[0x0000], 0 [0x0000], 0 [0x0000]
Error 5
Info message [0x0000] | 0 | 0 | Undefined | No error/
information.
Info 0 [0x0000], 0 [0x0000], 0 [0x0000], 0
[0x0000], 0 [0x0000], 0 [0x0000]
1.9. Alarm detection
Alarm trigger No entry
Page 5
