Scribd
Upload
314 views3 pages

Memmert WTB11 Waterbath Specs

This document provides product specifications for the Memmert Waterbath WTB11. The waterbath has a temperature range of at least 5°C above ambient to 100°C, with a setting accuracy of 0.1°C. It features a stainless steel interior and casing, with dimensions of 267 x 200 x 207 mm and 349 x 378 x 289 mm respectively. Electrical data and ambient condition requirements are also listed.

Uploaded by

BambangIrawan48
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
314 views3 pages

Memmert WTB11 Waterbath Specs

This document provides product specifications for the Memmert Waterbath WTB11. The waterbath has a temperature range of at least 5°C above ambient to 100°C, with a setting accuracy of 0.1°C. It features a stainless steel interior and casing, with dimensions of 267 x 200 x 207 mm and 349 x 378 x 289 mm respectively. Electrical data and ambient condition requirements are also listed.

Uploaded by

BambangIrawan48
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 3

Product specification

Waterbath

WTB11

Ideal for the temperature control of


ointments, emulsions, samples, plates
and nutrient solutions in the laboratory,
as well as warm storage and calibration
in the industrial segment

On this page, you can find all the essential technical data on the Memmert water bath. Our customer relations
team will be pleased to help if you want further information. If you should require a customised special solution,
please contact our technical specialists at [email protected].

Page 1/3 | 07.12.2020 Memmert GmbH + Co. KG | Tel. +49 (0) 9122/925-0 | E-Mail [email protected] | 0
Memmert Waterbath WTB11 - en

Temperature
Working temperature range at least 5 above ambient to +100 (depending on ambient pressure)

Setting temperature range +10 to +100 °C

Setting accuracy 0.1 °C


temperature

Control of standard components


Controller intuitive 3.5" colour graphic display with touch screen

Safety
Temperature control Independent temperature limiter to switch off the heating in case of failure

Heating concept
Heating corrosion-proof large-area heating on the outside of the interior

Stainless steel interior


Interior Deep-drawn stainless steel tray (stainless steel W.St. 1-4301), without corners and edges for easy
cleaning incl. central drain (no disturbing installations)

Dimensions W x H x D in w(A) x h(C) x d(B): 267 x 200 x 207 mm


mm

Volume 10 l

Textured stainless steel casing


Dimensions w(D) x h(E2) x d(F): 349 x 378 x 289 mm

Electrical data
Voltage 230 V, 50/60 Hz
Electrical load approx. 1000 W

Voltage 230 V, 50/60 Hz

Voltage 115 V, 50/60 Hz


Electrical load approx. 1000 W

Ambient conditions
Installation The vent openings in the left and back side must remain unobstructed. Minimum wall spacing on all
sides is 80 mm. The minimum spacing from the top of the bath to the next ceiling is 750 mm.

Ambient temperature +5 °C to +40 °C

Humidity rh max. 80 %, non-condensing

Overvoltage category II

Pollution degree 2

Page 2/3 | 07.12.2020 Memmert GmbH + Co. KG | Tel. +49 (0) 9122/925-0 | E-Mail [email protected] | 0
Memmert Waterbath WTB11 - en

Packing/shipping data
Transport information The appliances must be transported upright

Customs tariff number 8419 8998

Country of origin Federal Republic of Germany

WEEE-Reg.-No. DE 66812464

Dimensions approx incl. w x h x d: 570 x 450 x 380 mm


carton

Net weight approx. 7 kg

Gross weight carton approx. 12 kg

Standard units are safety-approved and bear the test marks

Page 3/3 | 07.12.2020 Memmert GmbH + Co. KG | Tel. +49 (0) 9122/925-0 | E-Mail [email protected] | 0

You might also like