Pressure Washing Solutions

Longest-Lasting Pumps and Accessories

Product Quality, Reliability and Support You Expect

www.catpumps.com

For more information, contact us at (763) 780-5440 | [email protected] | www.catpumps.com Pressure Washing Solutions 1
Keep Your Pressure Washer Running
with Cat Pumps
One of the most critical components in a pressure wash system
is the pump. The pump transfers energy from the engine/motor
to move water and wash solutions under pressure to the nozzle.
Because the pump needs to withstand system pressures and
works with a variety of fluids, it has a tough job to do. Specifying
the best pump for the application is vital to long trouble-free
service. That’s where Cat Pumps comes into play.

Cat Pumps extensive product line provides a solution for every

pressure washing application — portable or stationary:

• Direct-drive pumps for gas and electric systems provide

an economical solution with a compact footprint.
• Belt-drive pumps offer flexibility in meeting your
performance requirement.
• Gearbox pumps mount directly to gas engines for heavy- Cat Pumps Offers Lowest Cost
duty portable washing applications. of Ownership
• B
 ell housing and flexible coupling motor-pump units When quality counts, Cat Pumps is the #1 choice for pressure
provide a durable direct-drive alternative. washer pumps. Cheaper pumps can be found, but saving a
• Custom power units for large industrial pressure cleaning. few dollars up front can be costly in the long run. Downtime
• Accessories to match each pump or custom pressure is expensive, and preventing just one hour of unexpected
washing system performance. interruption can make up the difference. Get work done —
with far fewer hassles — by specifying Cat Pumps.

Cat Pumps customers enjoy the following benefits:

• Higher productivity and less downtime

• Fewer repairs and much lower maintenance costs
• Greater confidence in equipment performance

2 Pressure Washing Solutions For more information, contact us at (763) 780-5440 | [email protected] | www.catpumps.com
Quality You Need to Keep Your
Equipment Running
Cat Pumps designs and builds products to the highest quality levels. Every last design
detail is optimized for product life and performance.

• Specially-formulated seals and high-density, polished ceramic plungers typify the

attention to design detail that results in thousands of hours of trouble-free service
• Stainless steel valves, seats and springs provide corrosion resistance, positive
seating and long life
• Wet seal design increases service life by allowing pumped fluids to cool and
lubricate the elastomers on both sides

Product Specification Range

A wide range of pump options are available, including a variety of products that meet
industry certifications and directives.

• Flow: 0.13 to 240 gpm (0.49 to 908 lpm)

• Pressure: 100 to 10,000 psi (6.9 to 689 bar)
• RPM: 100 to 3450
• Liquid Temperature: -10° to 200°F (-23° to 93°C)
• Manifold Materials: Brass, Nickel Aluminum Bronze, 304 and 316 Stainless Steel,
Duplex Stainless Steel, with other materials available upon request
Model 3560
• Sealing Material: NBR, FPM, EPDM, PTFE, silicone-free and other materials available 20 gpm (76 lpm), 4000 psi (276 bar)
upon request
• Drives: Electric, Engine, Hydraulic, Pneumatic

For more information, contact us at (763) 780-5440 | [email protected] | www.catpumps.com Pressure Washing Solutions 3
Plunger Pumps
DIRECT DRIVE, HOLLOW SHAFT
5/8" NEMA 56C

PUMP SHAFT FLOW MAX. PRESSURE PUMP

MODEL SIZE GPM LPM PSI BAR RPM

4DX15EUF 5/8" 1.5 5.7 2000 138 3450

4DX20EUF 5/8" 2.0 7.6 2000 138 3450
4SP21ELU 5/8" 2.1 7.9 2000 138 1725
4DX30EU w/ Electric Motor 2SF22ES 5/8" 2.2 8.3 2000 138 3450
4DX27EUF 5/8" 2.7 10.2 2000 138 3450
4SP29ELU 5/8" 2.9 11.0 1500 103 1725
4DX30EUF 5/8" 3.0 11.4 1500 103 3450
2SF35ES 5/8" 3.5 13.2 1500 103 3450
NOTE: All 3450 rpm rated pumps can operate at 1725 rpm, thus reducing flow by 50%.
Electric Motor Horsepower (HP) = gpm x psi / 1460

DIRECT DRIVE, HOLLOW SHAFT

1 1/8" Electric NEMA 184TC

PUMP SHAFT FLOW MAX. PRESSURE PUMP

MODEL SIZE GPM LPM PSI BAR RPM

5SP30ELU 1 1/8" 3.0 11.4 3000 207 1725

5SP35ELU 1 1/8" 3.5 13.2 2500 172 1725
5SP40ELU 1 1/8" 4.0 15.1 2000 138 1725
5SP35ELU w/ Electric Motor
Electric Motor Horsepower (HP) = gpm x psi / 1460

DIRECT DRIVE, HOLLOW SHAFT

3/4" Engine and Motor

PUMP SHAFT FLOW MAX. PRESSURE PUMP

MODEL SIZE GPM LPM PSI BAR RPM

4DNX25GSI 3/4" 2.5 9.5 3000 207 3450

4DNX27GSI 3/4" 2.7 10.2 3000 207 3450
4DX29GUIF 3/4" 2.9 11.0 2600 179 3450
2SF30GS 3/4" 3.0 11.4 2000 138 3450
4DNX25GSI w/Engine 2SFX30GZ 3/4" 3.0 11.4 2500 172 3450
2SF35GS 3/4" 3.5 13.2 2000 138 3450
NOTE: Remove gas adapter plate when mounting pump to 3/4" shaft electric motor.
Approximate Gas Engine Horsepower (HP) = gpm x psi / 1140.
Consult engine manufacturer for actual torque available at required speed.

4 Pressure Washing Solutions For more information, contact us at (763) 780-5440 | [email protected] | www.catpumps.com
Plunger Pumps
DIRECT DRIVE, HOLLOW SHAFT
1" Engine

PUMP SHAFT FLOW MAX. PRESSURE PUMP

MODEL SIZE GPM LPM PSI BAR RPM

66DX30G1I 1" 3.0 11.4 4000 275 3400

4SPX32G1I 1" 3.2 12.2 3000 207 3450
66DX35G1I 1" 3.5 13.2 4000 275 3400
66DX40G1I 1" 4.0 15.0 4000 275 3400
66DX50G1I 1" 5.0 19.0 3500 241 3400 66DX40G1I w/ Engine
Approximate Gas Engine Horsepower (HP) = gpm x psi / 1140. Consult engine manufacturer for actual torque available
at required speed.

DIRECT DRIVE, GEARBOX

3/4", 1" and 1 1/8"

PUMP SHAFT FLOW MAX. PRESSURE PUMP

MODEL SIZE GPM LPM PSI BAR RPM

740G1 1" 2.8 10.6 5000 345 3465

3CP1120G 3/4" 3.5 13.2 2200 152 3600
760GI 1" 3.5 13.2 5000 345 3465
5CP3160CSSG1 1" 4.0 15.1 3500 241 3320
5CP3120CSSG1 1" 4.5 17.0 3500 241 3353 5CP3120CSSG1 w/ Engine
60G1 1" 4.5 17.0 4000 275 3450
700G1 1" 4.5 17.0 5000 345 3465
5CP3150CSSG1 1" 5.0 19.0 3000 207 3450
5CP5135CSSG1 1" 5.8 21.9 3500 241 3450
5CP5140CSSG1 1" 6.2 23.4 3000 207 3450
5CP6120CSSG1 1" 7.2 27.2 1500 103 3450
5CP6180CSSG1 1" 8.0 30.3 1500 103 3450
56G1 1" 8.0 30.3 2500 172 3600
56HSG1 1" 8.0 30.3 3000 207 3600
5CP6190G1 1" 9.7 36.7 1200 83 3450
7CP6110CSG1 1" 10.0 38.0 2000 138 3400
7CP6160CSG1 1" 10.0 38.0 2500 172 3400
7CP6170G1 1" 12.0 45.4 1800 124 3264
NOTE: All 1" versions are available in 1 1/8" size (G118), except 7CP Series
Approximate Gas Engine Horsepower (HP) = gpm x psi / 1140. Consult engine manufacturer for actual torque available
at required speed.

For more information, contact us at (763) 780-5440 | [email protected] | www.catpumps.com Pressure Washing Solutions 5
Plunger Pumps
DIRECT DRIVE
Bell Housing, Electric Motor

PUMP FLOW PRESSURE PUMP

MODEL GPM LPM PSI BAR RPM

740 2.9 11.0 5000 345 1750

5CP4114CSS 3.2 12.1 4000 276 1750
5CP3110CSS 3.6 13.6 3500 241 1725
5CP3120CSS w/ Bell Housing, Motor 760 3.6 13.6 5000 345 1750
5CP4116CSS 3.8 14.4 4000 276 1725
5CP4118CSS 4.2 16.0 4000 276 1750
5CP3160CSS 4.3 16.3 3500 241 1750
5CP4120CSS 4.5 17.0 4000 275 1750
60 4.7 17.8 4000 275 1750
700 4.7 17.8 5000 345 1750
5CP3120CSS 4.8 18.2 3000 207 1750
5CP3150CSS 5.2 19.8 3000 207 1750
5CP5120 6.0 22.7 2500 172 1750
5CP5140CSS 6.4 24.2 3000 207 1750
5CP6120 7.4 28.0 1200 83 1750
56 8.0 30.3 2500 172 1760
56HS 8.0 30.3 3000 207 1760
5CP6180CSS 8.2 31.0 1500 103 1750
5CP6190 9.7 36.7 1200 83 1750
7CP6110CS 10.5 39.7 2000 138 1750
7CP6160CS 10.6 40.1 2500 172 1750
Electric Motor Horsepower (HP) = gpm x psi / 1460

BELL HOUSING/FLEX COUPLING MOUNTING COMPONENTS

NEMA

PUMP NEMA MOTOR BELL HOUSING FLEX COUPLING

MODEL FRAME ASSEMBLY ASSEMBLY
5CP Series 143/145C 76056.5CP 8260
182/184TC 76184.5CP 8230
213/215TC 76215.5CP 8275
254/256TC 76256.5CP 8217
7FR 213/215TC 76215.7FR 8375
(Models: 56, 56HS, 60, 700)
254/256TC 76256.7FR 8380
284/286TC 76286.7FR 8389
7CP6110 182/184TC 76184.7CP 8370
Bell Housing / Flex Coupling
213/215TC 76215.7CP 8375
254/256TC 76256.7CP 8380
NOTE: Contact Cat Pumps for complete motorized pump units (pump, motor, bell housing and flexible coupling)
*IEC Bell Housings also available, contact Cat Pumps

6 Pressure Washing Solutions For more information, contact us at (763) 780-5440 | [email protected] | www.catpumps.com
Plunger Pumps
SOLID SHAFT
Belt, Hydraulic, PTO

PUMP FLOW PRESSURE PUMP

MODEL GPM LPM PSI BAR RPM

1810 3.0 11.4 10000 689 1500

5CP3120 4.5 17.0 3500 241 1645
5CP3120CSS 4.5 17.0 3500 241 1645
57 4.5 17.0 4000 275 1285
5CP4120CSS 4.5 17.0 4000 275 1750 5CP5140
700 4.5 17.0 5000 345 1700
5CP5120 5.0 18.9 3000 207 1415
550 5.0 18.9 3000 207 1415
56 5.5 20.8 3500 241 1210
5CP5140 5.5 20.8 3500 241 1500
5CP6120 6.0 22.7 1600 110 1400
1570 6.0 22.7 6000 414 1350
5CP6190 8.0 30.3 1450 100 1450
56HS 8.0 30.3 3000 207 1760
1560 9.0 34.0 4000 275 1140
1050 10.0 38.0 2200 152 958
660 10.0 38.0 3000 207 1429
3507 10.0 38.0 5000 345 915
3550 10.0 38.0 6000 414 940
7CP6170 11.0 41.6 2000 138 1450
1050 12.3 46.5 1800 124 1180
7CP6170 12.0 45.4 1800 124 1600
1580 12.0 45.4 3000 207 1180
1530 15.6 59.0 1500 103 1450
1540E 19.3 73 1200 83 1180
2510 20.0 75.7 2000 138 1450
3560 20.0 75.7 4000 275 1160
3560 25.0 94.6 3000 207 1450
Electric Motor Horsepower (HP) = gpm x psi / 1460

For more information, contact us at (763) 780-5440 | [email protected] | www.catpumps.com Pressure Washing Solutions 7
Accessories
MOUNTING COMPONENTS, SAE HYDRAULICS
Bell Housing Assembly

PUMP SAE BELL HOUSING

MODELS
SERIES TYPE ASSEMBLY
3CP 3CP1120 – 1140 A2 76SAEA2.3CP
B2 76SAEB2.3CP
B4 76SAEB4.3CP
5CP 5CP3105, 3110, 3160, 3120, 5CP4120, 5120, A2 76SAEA2.5CP
6120, 6180CSS, 6190
B2 76SAEB2.5CP
5CP3120CSS w/ SAE Motor
B4 76SAEB4.5CP
7CP 7CP6110CS, 7CP6170 A2 76SAEA2.7CP
B2 76SAEB2.7CP
B4 76SAEB4.7CP
7FR 56, 56HS, 60, 700, 740, 760 A2 76SAEA2.7FR
B2 76SAEB2.7FR
B4 76SAEB4.7FR
15FR 660, 1050, 1530, 1540E, 1560, 1570, 1580 B2 76SAEB2.15FR
B4 76SAEB4.15FR
Bell Housing Assemblies include mounting hardware and flange
SAE TYPE:
A2 = SAE "A" 2 Bolt, 3.25" Pilot
B2 = SAE "B" 2 Bolt, 4" Pilot
B4 = SAE "B" 4 Bolt, 4" Pilot

MOUNTING COMPONENTS, SAE HYDRAULICS

Flexible Coupler Assembly

PUMP SAE FLEX COUPLER SHAFT TO TORQUE

SERIES TYPE ASSY SHAFT RATING (FT-LBS)
3CP A2 8271 16.5mm x 5/8" 74
B2, B4 8272 16.5mm x 7/8" 74
5CP A2 8273 20mm x 5/8" 74
991903
B2, B4 8274 20mm x 7/8" 74
7CP & 7FR A2 8371 24mm x 5/8" 92
B2, B4 8372 24mm x 7/8" 92
15FR B2, B4 8387 30mm x 7/8" 150
SAE TYPE:
A2 = SAE “A” 2 Bolt, 3.25" Pilot
B2 = SAE “B” 2 Bolt, 4" Pilot
B4 = SAE “B” 4 Bolt, 4" Pilot

8 Pressure Washing Solutions For more information, contact us at (763) 780-5440 | [email protected] | www.catpumps.com
Accessories
CLUTCHES, 12 VDC

CLUTCH DIAMETER/ BELT PUMP SHAFT PUMP

MODEL
NUMBER OF GROOVES TYPE DIAMETER MODELS
34960 7" / 1 A 16.5 mm 3CP1120 – 1140
34965 7" / 2 A 16.5 mm 3CP1120 – 1140
34970 7" / 1 A 20.0 mm
5CP2120W – 2150W, 3120/3120CSS,
34980 7" / 2 A 20.0 mm
5120 – 5140CSS, 5CP6120 – 6190
34299 7.3" / 8 Poly-V, L-Style 20.0 mm 34963
34959 7.3" / 8 Poly-V, L-Style 24.0 mm 56, 60, 530, 550, 700, 740, 760
34971 7.3" / 8 Poly-V, L-Style 24.0 mm 7CP6110CS – 7CP6170
5CP2120W – 2150W, 3120/3120CSS,
76970 10" / 2 B 20.0 mm
5120 – 5140CSS, 5CP6120 – 6190
34628 12.75" / 1 B 24.0 mm 56, 60, 700, 740, 760
34630 12.75" / 2 B 24.0 mm 56, 60, 700, 740, 760
34563 12.75" / 2 B 30.0 mm 1050, 1570, 1580
30655 12.75" / 2 B 30.0 mm 2510, 2530

UNLOADERS, TRAPPED PRESSURE

Brass Models
7694
FLOW RANGE PRESSURE RANGE PORTS
MODEL
GPM LPM PSI BAR INLET/DISCHARGE BYPASS

7500S 0.5 – 6.0 1.9 – 23 100 – 2000 6.9 – 138 3/8" NPT(M) 3/8" NPT(F)
7581 0.5 – 6.5 1.9 – 25 800 – 2300 55 – 158 3/8" NPT(M) 3/8" NPT(F)
7583 0.5 – 8.0 1.9 – 30 250 – 2000 6.9 – 138 3/8" NPT(M) 3/8" NPT(F)
7620 0.5 – 8.0 1.9 – 30 100 – 3200 6.9 – 220 3/8" BSP(M)/BSP(F) 3/8" BSP(F)
7693 2.5 – 10.5 9.5 – 40 230 – 2300 16 – 60 3/8" NPT(F) 3/8" NPT(F)
7694 2.5 – 10.5 9.5 – 40 400 – 4050 28 – 280 3/8" NPT(F) 3/8" NPT(F)
7630 2.0 – 10.5 8 – 40 400 – 5100 28 – 350 3/8" NPT(M)/BSP(F) 1/2" NPT(F)
9970 0.5 – 15.9 1.9 – 60 1160 – 11600 80 – 800 1/2" BSPP(G) 1/2" BSPP(G)
7537
7537 1.0 – 21 3.8 – 80 230 – 2600 16 – 179 1/2" NPT(F) 1/2" NPT(F)
7542 1.0 – 21 3.8 – 80 800 – 4000 55 – 275 1/2" NPT(F) 1/2" NPT(F)
7590 10 – 52 38 – 200 400 – 2175 28 – 150 1" NPT(F) 1" NPT(F)
7592 10 – 52 38 – 200 450 – 2500 31 – 175 1" NPT(F) 1" NPT(F)
7593 10 – 52 38 – 200 750 – 4050 51 – 280 1" BSPP(G) 1" BSPP(G)
9950 50 – 120 189 – 454 100 – 2900 7 – 200 1 1/4" BSPP(G) 1 1/4" BSPP(G)

Converting Unloader into a Relief Valve

All trapped pressure unloaders can be configured as a pressure relief valve by removing the check valve
from the discharge fitting. To order a relief valve, add “.100” at the end of the unloader part number.
Example: 7537 = Pressure Unloader and 7537.100 = Pressure Relief Valve.

For more information, contact us at (763) 780-5440 | [email protected] | www.catpumps.com Pressure Washing Solutions 9
Accessories
POP-OFF VALVES
Brass Models

MAX. FLOW PRESSURE RANGE MAX. RELIEF SETTING PORTS

MODEL
GPM LPM PSI BAR PSI BAR INLET/DISCHARGE BYPASS

30960 6.0 22.7 300 – 1500 20 – 103 1650 114 1/4" NPT(M) 3/4" Barb
33960 6.0 22.7 300 – 1500 20 – 103 1650 114 3/8" NPT(M) 3/4" Barb
30961 6.0 22.7 1000 – 3000 6.9 – 207 3300 228 1/4" NPT(M) 3/4" Barb
30961 9940 33961 6.0 22.7 1000 – 4000 6.9 – 275 4400 303 1/4" NPT(M) 3/4" Barb
33962 6.0 22.7 1000 – 4000 6.9 – 275 4400 303 3/8" NPT(M) 3/4" Barb
9940 25 95 1000 – 4000 6.9 – 275 4400 303 3/4" NPT(M) 1" Barb

PRESSURE GAUGES
Brass Models (Brass Fitting and Bourdon Tube, 304 SS Case)

PRESSURE RANGE PORTS

MODEL MAX. TEMP (°F)
PSI BAR INLET

6086 0 – 1500 0 – 103 140 1/4" NPT(M)

6088 0 – 3000 0 – 207 140 1/4" NPT(M)
6089 0 – 6000 0 – 415 140 1/4" NPT(M)
6088

THERMAL VALVES
Brass Models

MAX. FLOW MAX PRESSURE TEMPERATURE PORTS

MODEL
GPM LPM PSI BAR MAX (°F) INLET BLEED

7140 25 95 125 8.6 145 1/4" NPT(M) 1/8" NPT(F)

7141 25 95 125 8.6 145 3/8" NPT(M) 1/8" NPT(F)
7140
7142 25 95 125 8.6 145 1/2" NPT(M) 1/8" NPT(F)
7142 7143 25 95 125 8.6 165 1/4" NPT(M) 1/8" NPT(F)
7144 25 95 125 8.6 165 3/8" NPT(M) 1/8" NPT(F)
7145 25 95 125 8.6 165 1/2" NPT(M) 1/8" NPT(F)
7146 25 95 125 8.6 130 1/4" NPT(M) 1/8" NPT(F)
7170 25 95 125 8.6 180 1/4" NPT(M) 1/8" NPT(F)
7171 25 95 125 8.6 180 3/8" NPT(M) 1/8" NPT(F)
7172 25 95 125 8.6 180 1/2" NPT(M) 1/8" NPT(F)
7175 25 95 125 8.6 190 1/4" NPT(M) 1/8" NPT(F)
7176 25 95 125 8.6 190 3/8" NPT(M) 1/8" NPT(F)
7177 25 95 125 8.6 190 1/2" NPT(M) 1/8" NPT(F)

10 Pressure Washing Solutions For more information, contact us at (763) 780-5440 | [email protected] | www.catpumps.com
Accessories
SHUT-OFF GUNS 36140
Brass Models

MAX. FLOW MAX PRESSURE PORTS

MODEL TYPE
GPM LPM PSI BAR INLET BLEED

33425 8 30 2900 200 Front Load 3/8" NPT(F) 1/4" NPT(F)

76165 8 30 4000 275 Shut-off 3/8" NPT(F) 1/4" NPT(F)
35150 8 30 5000 345 Shut-off 3/8" NPT(F) 1/4" NPT(F)
31260 8 30 5100 350 Pressure Compensating 3/8" NPT(F) 1/4" NPT(F) 31260

32300 10 38 3000 207 Dump, w/15" Lance 3/8" NPT(F) 1/8" NPT(F)
32301 10 38 3000 207 Dump, w/39" Lance 3/8" NPT(F) 1/8" NPT(F)
31137 10 38 4500 310 Horizontal 3/8" NPT(F) 1/4" NPT(F) 31137
36140 10.5 40 5000 345 Shut-off 3/8" NPT(F) 1/4" NPT(F)
31265 13 49 3650 252 Pressure Compensating 3/8" NPT(F) 1/4" NPT(F)
39410 21 80 7250 500 Shut-off 1/2" BSP(F) 1/2" BSP(F)
39415 32 121 1750 120 Shut-off 1/2" BSP(F) 1/2" BSP(F)
39420 53 200 2900 200 Shut-off 1/2" BSP(F) 1/2" BSP(F)

VALVE PLUG ADAPTERS

Brass Models
MODEL MODELS USED PORT MATERIAL
134670 4DX, 4DNX, 4SPX, 4SP 1/4" NPT(F) BB
35758 66DX 3/8" NPT(F) BB
998954 3CP Series 3/8" NPT(F) BB
34549
76658 310, 5CP2120, 2150W 3/8" NPT(F) BB
34549 45, 5CP3105 – 3160CSS, 5120 – 5140 3/8" NPT(F) BB
45939T 56 – 60 3/8" NPT(F) BB
34447 7PFR, 15PFR, 5CP6120, 7CP 3/8" NPT(F) BB
997878 3560 1/4" NPT(F) BB

For more information, contact us at (763) 780-5440 | [email protected] | www.catpumps.com Pressure Washing Solutions 11
Accessories
FILTERS

SUCTION/PRESSURIZED FLOW SCREEN PORTS

MODEL
7107 GPM LPM MESH MATERIAL INLET DISCHARGE
7107.7 WHITE OR CLEAR NYLON BODY
7104 / 7104.4* 6 / 10 23 / 38 80 S 1/2" NPT(F) 1/2" NPT(F)
7105 / 7105.5* 15 / 20 57 / 76 80 S 3/4" NPT(F) 3/4" NPT(F)
7106 / 7106.6* 20 / 25 76 / 95 80 S 1" NPT(F) 1" NPT(F)
7107 / 7107.7* 35 / 50 133 /189 80 S 1 1/4" NPT(F) 1 1/4" NPT(F)
7203 7108 / 7108.8* 60 / 75 227 / 284 80 S 1 1/2" NPT(F) 1 1/2" NPT(F)

WHITE OR CLEAR NYLON BODY (MICRO)

7203 / 7203.3* 10 gpm max 38 80 S 1/2" NPT(M) 1/2" NPT(M)
7204 / 7204.4* 10 gpm max 38 80 S 1/2" NPT(F) 1/2" NPT(F)

REINFORCED COMPOSITE BODY (w/ brass threaded ports, 1/4" BSP(F) auxiliary port)
32738 8 gpm max 30 50 SS 1/2" BSP(F) 1/2" BSP(M)
32748 8 gpm max 30 50 SS 1/2" BSP(F) 1/2" BSP(F)
*Clear Nylon Body

VARI-NOZZLES

NOZZLE FLOW RANGE PRESSURE RANGE

MODEL PORT
SIZE GPM LPM PSI BAR
7920 2.0 1.0 – 1.9 3.8 – 7.2 100 – 3650 6.9 – 252 1/4" BSP(F)
7930 3.0 1.5 – 2.9 5.7 – 10.8 100 – 3650 6.9 – 252 1/4" BSP(F)
7935 3.5 7.8 – 3.3 6.6 – 12.6 100 – 3650 6.9 – 252 1/4" BSP(F)
7920
7940 4.0 2.0 – 3.8 7.8 – 14.4 100 – 3650 6.9 – 252 1/4" BSP(F)
7945 4.5 2.2 – 4.3 8.3 – 16.3 100 – 3650 6.9 – 252 1/4" BSP(F)
7950 5.0 2.5 – 4.7 9.5 – 17.8 100 – 3650 6.9 – 252 1/4" BSP(F)
7955 5.5 2.8 – 5.2 10.6 – 19.7 100 – 3650 6.9 – 252 1/4" BSP(F)
7960 6.0 3.0 – 5.6 11.4 – 21.2 100 – 3650 6.9 – 252 1/4" BSP(F)
7970 7.0 3.5 – 6.6 13.2 – 25.0 100 – 3650 6.9 –252 1/4" BSP(F)

12 Pressure Washing Solutions For more information, contact us at (763) 780-5440 | [email protected] | www.catpumps.com
Accessories
TURBO AND ROTATING NOZZLES

NOZZLE FLOW RANGE PRESSURE RANGE

MODEL PORT
SIZE GPM LPM PSI BAR

TURBO-NOZZLES (with ceramic nozzle, 25° spray pattern, 3,000 psi)

7265.20 2.0 1.1 – 1.7 4.1 – 6.4 1200 – 3000 83 – 207 1/4" BSP(F)
7265.30 3.0 1.6 – 2.6 6.0 – 9.8 1200 – 3000 83 – 207 1/4" BSP(F)
7265.35 3.5 1.9 – 3.0 7 – 11 1200 – 3000 83 – 207 1/4" BSP(F) 7265.50
7265.40 4.0 2.2 – 3.5 8.3 –13 1200 – 3000 83 – 207 1/4" BSP(F)
7265.45 4.5 2.4 – 3.9 9 – 14.8 1200 – 3000 83 – 207 1/4" BSP(F) 7625.55
7265.50 5.0 2.8 – 4.4 10.6 – 16.7 1200 – 3000 83 – 207 1/4" BSP(F)
7265.55 5.5 3.0 – 4.8 11.1 – 18.2 1200 – 3000 83 – 207 1/4" BSP(F)
7265.60 6.0 3.2 – 5.2 12.1 – 19.7 1200 – 3000 83 – 207 1/4" BSP(F)
7265.65 6.5 3.6 – 5.7 13.6 – 21.6 1200 – 3000 83 – 207 1/4" BSP(F)

TURBO-NOZZLES (with ceramic nozzle, 25° spray pattern, 5,000 psi)

7270.45 4.5 3.0 – 5.0 11.4 – 18.9 2000 – 5000 138 – 345 1/4" BSP(F)
7270.55 5.5 3.8 – 6.2 14.4 – 23.5 2000 – 5000 138 – 345 1/4" BSP(F)
7270.65 6.5 4.6 – 7.3 17.4 – 27.6 2000 – 5000 138 – 345 1/4" BSP(F)
7270.80 8.0 5.6 – 8.9 21.2 – 33.7 2000 – 5000 138 – 345 1/4" BSP(F)
7270.90 9.0 6.4 – 10 24.2 – 37.9 2000 – 5000 138 – 345 1/4" BSP(F)

ROTATING NOZZLES (with ceramic insert, 20° spray pattern, 3,650 psi)
7625.30 3.0 1.6 – 2.9 6.1 – 11 1200 – 3650 83 – 252 1/4" BSP(F)
7625.35 3.5 1.9 – 3.3 7.2 – 12.5 1200 – 3650 83 – 252 1/4" BSP(F)
7625.40 4.0 2.2 – 3.8 8.3 – 14.4 1200 – 3650 83 – 252 1/4" BSP(F)
7625.45 4.5 2.4 – 4.3 9.1 – 16.3 1200 – 3650 83 – 252 1/4" BSP(F)
7625.50 5.0 2.8 – 4.8 10.6 – 18.2 1200 – 3650 83 – 252 1/4" BSP(F)
7625.55 5.5 3.0 – 5.2 11.4 – 19.7 1200 – 3650 83 – 252 1/4" BSP(F)
7625.60 6.0 3.2 – 5.7 12.1 – 21.6 1200 – 3650 83 – 252 1/4" BSP(F)
7625.65 6.5 3.6 – 6.2 13.6 – 23.5 1200 – 3650 83 – 252 1/4" BSP(F)
7625.70 7.0 3.8 – 6.7 14.4 – 25.4 1200 – 3650 83 – 252 1/4" BSP(F)
7625.80 8.0 4.4 – 7.7 16.7 – 29.1 1200 – 3650 83 – 252 1/4" BSP(F)

ROTATING NOZZLES (with ceramic insert, 20° spray pattern, 5,100 psi)
7632.35 3.5 2.8 – 3.9 10.6 – 14.8 2600 – 5100 180 – 350 1/4" BSP(F)
7632.40 4.0 3.2 – 4.5 12.1 – 17 2600 – 5100 180 – 350 1/4" BSP(F)
7632.45 4.5 3.6 – 5.1 13.6 – 19.3 2600 – 5100 180 – 350 1/4" BSP(F)
7632.50 5.0 4.0 – 5.6 15.1 – 21.2 2600 – 5100 180 – 350 1/4" BSP(F)
7632.55 5.5 4.4 – 6.2 16.7 – 23.5 2600 – 5100 180 – 350 1/4" BSP(F)
7632.60 6.0 4.8 – 6.7 18.2 – 25.4 2600 – 5100 180 – 350 1/4" BSP(F)
7632.65 6.5 5.2 – 7.3 19.7 – 27.6 2600 – 5100 180 – 350 1/4" BSP(F)
7632.70 7.0 5.6 – 7.9 21.2 – 29.9 2600 – 5100 180 – 350 1/4" BSP(F)

For more information, contact us at (763) 780-5440 | [email protected] | www.catpumps.com Pressure Washing Solutions 13
Accessories
FOAMERS

FLOW RANGE PRESSURE RANGE

MODEL TYPE PORT
GPM LPM PSI BAR
39234 FOAMER, WITH AND WITHOUT BOTTLE
32017 2–4 7.6 – 15.2 750 – 2900 52 – 200 w/o Bottle 1/4" BSP(F)
39234 2–4 7.6 – 15.2 750 – 2900 52 – 200 w/ 1 Liter Bottle 1/4" BSP(F)
39196 2–4 7.6 – 15.2 750 – 2900 52 – 200 w/ 2 Liter Bottle 1/4" BSP(F)

PULSE PUMPS

INJECTION RATE PRESSURE RANGE PORTS

MODEL
GPM LPM PSI BAR INLET DISCHARGE
PULSE PUMPS FOR PLUNGER AND PISTON PUMPS
6340, 6341 1.0 – 10.5 3.8 – 40.0 100 – 2000 6.9 – 138 1/8" NPT(F) 1/8" NPT(F)
6340 & 6350
6350, 6351 1.0 – 12 3.8 – 45.4 500 – 3000 35 – 207 1/4" Hose Barb 1/8" NPT(F)

CHEMICAL INJECTORS

ORIFICE SIZE FLOW RANGE MAXIMUM PRESSURE PORTS

MODEL
MM GPM LPM PSI BAR INLET DISCHARGE

BRASS – ADJUSTABLE
7182 1.8 mm 2–4 7.6 – 15 3500 241 3/8" NPT(M) 3/8" NPT(M)
7192 1.8 mm 2–4 7.6 – 15 3500 241 M18 x 1.0 3/8" NPT(M)
7183 2.1 mm 3–5 11.4 – 19 3500 241 3/8" NPT(M) 3/8" NPT(M)
7193 2.1 mm 3–5 11.4 – 19 3500 241 M18 x 1.0 3/8" NPT(M)
7192
7184 2.3 mm 3–6 11.4 – 23 3500 241 3/8" NPT(M) 3/8" NPT(M)
7194 2.3 mm 3–6 11.4 – 23 3500 241 M18 x 1.0 3/8" NPT(M)
7224 2.3 mm 3–6 11.4 – 23 3500 241 M22 x 1.5 3/8" NPT(M)

PRESSURE SWITCHES

MAXIMUM PRESSURE ENGAGING PRESSURE VOLTAGE MAXIMUM INLET

MODEL
PSI BAR PSI BAR RANGE AMP PORT
STAINLESS STEEL – NPT PORTS
31615 31615 3650 250 215 15 12 – 250 6 1/4" NPT(M)
31625 3650 250 360 25 12 – 250 6 1/4" NPT(M)
31640 3650 250 580 40 12 – 250 6 1/4" NPT(M)

14 Pressure Washing Solutions For more information, contact us at (763) 780-5440 | [email protected] | www.catpumps.com
Custom Engineered Power Units
You define. We design.

For over 25 years, Cat Pumps has been the industry leader in
providing custom-engineered pumping systems to meet a wider
range of application needs. By selecting Cat Pumps for your next
pumping system, customers eliminate the hassle and expense
of designing, multiple source buying, fabrication and testing.
The technical sales team assists with proper component selection,
as well as installation, operation and maintenance support.

All systems are designed, built and pressure tested in the

Cat Pumps Minneapolis location. To begin the quoting process,
call the main office at (763) 780-5440 or submit the custom
system quote form at catpumps.com.

With thousands of installations running around the world,

Cat Pumps is the supplier of choice for custom pumping systems.

System Configuration Advanced Control Options

With extensive experience building thousands of systems,
Cat Pumps can help determine the best configuration for
any application.

Base
System design starts with choosing the base that best fits the
application. Numerous base configurations are available to meet
space, portability, sound and material demands.
• Standard • Vertically Stacked • Enclosed • Multiple Pump

Power Source
A qualified technical staff with extensive experience can assist
in recommending the correct product for any power source
available.
• Electric • Gas • Diesel • Hydraulic • Pneumatic
Ask about advanced control options designed to provide
Drive Package maximum system performance as well as system protection.
A wide variety of drive packages are available to complement Options include:
any power source of choice.
• Variable Frequency Drives (VFD)
• Belt • Direct Drive • Gearbox • Clutch
• PID Loop (varies speed of pump to maintain system pressure)
Accessories • Multiple Pump Systems
Choose from hundreds of high-quality genuine Cat Pumps • Low-Pressure Seal Monitors
accessories for optimum system performance and life.
• Auto Shutdowns (Temperature and Low Inlet Pressure)
• Regulator • Relief / Pop-off Valve • Pressure Gauge Other control options are available upon request.
• Pulsation Dampener • Inlet Filter / Strainer • Oil

For more information, contact us at (763) 780-5440 | [email protected] | www.catpumps.com Pressure Washing Solutions 15
.3400 Seals Designed for Higher
Temperatures and Run-Dry Events
Handles Liquids up to 190° F (88° C)
High-temperature liquids place extraordinary demands on system components, especially the pump. Premature pump failure can
lead to production downtime, added maintenance costs, damaged final product and increased personnel hazards. Cat Pumps high-
temperature seals can handle liquids up to 190° F (88° C) and perform in intermittent run dry conditions. Pumps are available in a
wide variety of flows and pressures handling a variety of applications.

Features and Benefits Applications

• Suitable in intermittent run dry conditions and higher-temperatures. • Carpet cleaning
• Pumps are field-proven and designed for continuous-duty applications. • In-plant cleaning and sanitizing
• Brass and stainless steel construction to meet application requirements. • Vehicle cleaning
• Wide range of drive options include belt, direct, clutch and gearbox drives. • Conveyor belt cleaning
• Pump family ranges from 0.5 – 25 gpm (1.9 – 95.0 lpm) at 100 – 5000 psi • Oil rig wash down
(6.9 – 345 bar) meeting a wide range of applications. • Contractor cleaning
• Easy to order, add .3400 to end of pump model number. • Hood vent cleaning
• Tank cleaning

Ultimate Protection for

Pressure Washer Storage
Cat Pumps Pressure Washer Pump Protector guards your pressure washer pump
during extended storage — there is no better way to protect your pump. Order part
number 6208 for a case of six bottles (12 fluid ounces each).

Features:
• Excellent winterizer: protects pumps from freezing to -25° F
• Lubricates seals, valves and valve seats to prevent sticking
• Inhibits corrosion and mineral deposits
• Environmentally friendly — 100% biodegradable
Learn more at our Youtube channel at:
youtube.com/user/catpumps1968

16 Pressure Washing Solutions For more information, contact us at (763) 780-5440 | [email protected] | www.catpumps.com
Cat Pumps Oil —
Better Than the Rest
Cat Pumps oil is the only lubricant exclusively designed for and thoroughly tested in
all models of Cat Pumps. Premium base stocks are the formulation’s “backbone” that
provides superior lubricity that protects internal pump components.

• Custom blend, premium grade, petroleum-based hydraulic

oil for all Cat Pumps.
• Anti-wear additives protects metal-to-metal drive surfaces,
extending drive life.
• H
 igh oxidative and chemical stability resists deposit formations
and provides consistent fluid performance.
• P
 remium anti-corrosion additives offer protection in the most
demanding operating environments.
Cat Pump oil is readily available in a variety of container sizes
through any Cat Pumps distributor or OEM.

Cat Pumps Integral Unloaders

are Long-Lasting and Easy-to-Service
Pumps with built-in integral unloader valves have a smaller footprint and also reduce potential leak paths. What’s more,
the Cat Pumps design is easy to service. No special tools are required and each repair kit is pre assembled with only four parts!

Like all Cat Pumps products, kits are in stock for 24-hour shipping.

Unloader Valve Maintenance

Easy to Service
• No special tools required
• Drop-in replacement components for quick service
• Repair kits are preassembled with only four (4) parts
• Repair kits are on-the-shelf for 24-hour shipping

For more information, contact us at (763) 780-5440 | [email protected] | www.catpumps.com Pressure Washing Solutions 17
Cat Pumps
Pressure Washer Center
Pressure Washer Center is a new resource available on Cat Pumps website. You can
find the link on the top right of the Cat Pumps home page. The Pressure Washer Center
contains useful information about pressure washer pumps and systems, such as...

• Troubleshooting Guide • Long-Term Storage • FAQ’s

• Pump Identification • Repair Tips

Properly maintaining your pressure washer is the key to enjoying years of trouble-free
service. Cat Pumps is here to help you all the way. Make the Cat Pumps Pressure
Washer Center your go-to resource for pressure washer information.

www.catpumps.com/pressure-washer-center.asp

Online Service and Support Videos

Cat Pumps offers a variety of training and support services to our sales partners and customers. High-pressure systems require special
attention to achieve safe and reliable operation. Optimum performance of the pump depends upon the entire system, determined
by proper design, component selection, installation, and maintenance of the pump as well as system accessories. With proper design,
installation, and care, high-pressure pumps and systems from Cat Pumps can provide thousands of hours of trouble-free service.

Service Videos
Learn how to service seal and valve kits in these authorized Cat Pumps videos,
hosted on Cat Pumps YouTube channel and website. Find them at these links:

www.catpumps.com/service www.catpumps/youtube

Training Videos
Informative “Whiteboard Sessions” videos cover a variety of technical topics in
short and easy-to-comprehend lessons conducted by Cat Pumps engineering.
Find them at these links:

www/catpumps.com/whiteboard-sessions.asp www.catpumps/youtube

18 Pressure Washing Solutions For more information, contact us at (763) 780-5440 | [email protected] | www.catpumps.com
Customer Service —
Another Cat Pumps Difference

When customers do business with Cat Pumps, they benefit not only from long-lasting dependable products, but also from
excellent customer service and support. Cat Pumps customers enjoy the following benefits:

• 99.4% order fill rate, supported by world-class inventory management system

• 99.9% shipping accuracy, which means customers receive what they ordered
• 99.8% of orders ship within 24 hours for fast on-the-job delivery
• Worldwide distribution network stocking genuine Cat Pumps products and parts
• Industry-leading customer service with “live” support, from phone operators to Technical Services
• Experienced staff on call to assist with inquiries, from designing power units to system troubleshooting
• “Account Access” on-line portal provides 24/7 access to registered customers to enter purchase orders, receive up-to-date pricing,
and track orders. Contact Cat Pumps for more information.
• Email [email protected] for fast response to questions and requests or call (763) 780-5440
Sales and service support is provided by highly qualified distribution network covering the U.S., Canada, and Mexico. Cat Pumps has
an international presence with sales offices in the U.K., Belgium and Germany, as well as a worldwide distribution channel.

Complete, Accurate and Fast Order Shipping

PERFORMAN PERFORMAN PERFORMAN
ICE ICE ICE
TOMER SERV

TOMER SERV

TOMER SERV
CE

CE

CE

99.4%
Fill Rates
99.9%
Shipping Accuracy
99.8%
On-time Delivery
CUS

CUS

CUS

Pumps and parts are stocked for off-the-shelf delivery. Wherever customers are in the world, Cat Pumps service and support are never far
away. Long-lasting products backed by excellent customer service are why Cat Pumps is the best choice for high-pressure pumps and systems.

For more information, contact us at (763) 780-5440 | [email protected] | www.catpumps.com Pressure Washing Solutions 19
 ABOUT CAT PUMPS Proven Quality, Customer Focused
Cat Pumps is the world leader in the design, manufacture and marketing of the most
dependable high-pressure positive displacement reciprocating triplex pumps and systems
in the market. Our mission to exceed customer expectations for quality, reliability, availability,
delivery, technical expertise and aftermarket support to assure the best value in all the
industries served.

LOCATIONS Worldwide Headquarters

Cat Pumps Cat Pump (U.K.) Ltd.
1681 94th Lane Northeast 1 Fleet Business Park, Sandy Lane
Minneapolis, MN 55449 Church Crookham
USA FLEET, Hampshire GU52 8BF
England
P: (763) 780-5440
F: (763) 780-2958 P: +44(0)1252 622031
[email protected] F: +44(0)1252 626655
www.catpumps.com [email protected]
[email protected]
Territories Served www.catpumps.co.uk
U.S., Canada
Territories Served
International Division U.K. and Ireland
P: (763) 780-5440
F: (763) 785-4329
[email protected]
www.catpumps.com
Territories Served
Africa, Asia, Australia, Central and
South America, Mexico, Middle East,
New Zealand, Turkey

Cat Pumps International N.V. Cat Pumps Deutschland GmbH

Heiveldekens 6A Buchwiesse 2, D-65510
2550 Kontich Idstein
Belgium Germany
P: 32 3 450 71 50 P: +49 6126 9303 0
F: 32 3 450 71 51 F: +49 6126 9303 33
[email protected] [email protected]
www.catpumps.be www.catpumps.de
Territories Served Territories Served
Western Europe (except U.K., Austria, Commonwealth of Independent States
Germany, and Austria) (CIS), Germany and Eastern Europe

SALES, DISTRIBUTION, Call today for product and application assistance.

SERVICE (763) 780-5440 or visit us at www.catpumps.com

CAT PUMPS
1681 – 94TH LANE N.E. MINNEAPOLIS, MN 55449-4324
PHONE (763) 780-5440 — FAX (763) 780-2958
e-mail: [email protected]
www.catpumps.com

For International inquiries go to www.catpumps.co.uk and navigate to the “Contact Us” link.

©2020 Cat Pumps Inc. All rights reserved. All written and visual data contained in this document are based on the latest product information available at the time of publication. Cat Pumps reserves
the right to make changes at any time without notice. All other brand names or marks are used for identification purposes and are trademarks of their respective owners.
PN 992220 Rev. M 20204 7/20