Scribd
Upload
547 views

Demonstration Checklists: Demonstration Checklist Assessment Tools

This document provides a checklist for assessing a trainee's demonstration of skills for preparing computer-aided drawings. The checklist lists supplies, materials, tools, equipment, and criteria for evaluating the trainee as they perform tasks like securing work instructions, preparing materials, setting up systems, reviewing drawings, setting up pages, producing drawings and details, saving work, plotting, submitting drawings, and cleaning up. The trainer, Daniel D. Reyes, will use this checklist to evaluate the trainee's demonstration and determine if it was satisfactory.

Uploaded by

Daniel Reyes
Copyright
© © All Rights Reserved
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
547 views

Demonstration Checklists: Demonstration Checklist Assessment Tools

This document provides a checklist for assessing a trainee's demonstration of skills for preparing computer-aided drawings. The checklist lists supplies, materials, tools, equipment, and criteria for evaluating the trainee as they perform tasks like securing work instructions, preparing materials, setting up systems, reviewing drawings, setting up pages, producing drawings and details, saving work, plotting, submitting drawings, and cleaning up. The trainer, Daniel D. Reyes, will use this checklist to evaluate the trainee's demonstration and determine if it was satisfactory.

Uploaded by

Daniel Reyes
Copyright
© © All Rights Reserved
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
You are on page 1/ 2

DEMONSTRATION CHECKLISTS

Trainee’s Name:
Trainer’s Name: Daniel D. Reyes
Units of Competency
covered:
PREPARE COMPUTER-AIDED DRAWINGS

Date of Assessment:
Time of Assessment
Instructions for Demonstration
Given the necessary materials, tools and equipment, the trainee
must be able to perform all the following assessment criteria.

Please see attached instruction for Demonstration (Candidate)

Supplies and Materials Tools and Equipment


 Pen/pencil  Computer
 Paper  Printer
 Flash drive
 AutoCAD software

 To show if evidence is
demonstrated

During the Demonstration of skills, the Yes No N/A


candidate:
Secured work instruction following standard   
operating procedures (SOP) and interpret
according to drawing job requirements. *
Prepared and selected materials according to   
job requirements.*
Performed system set up procedure for working   
drawings following the job requirements. *
Performed review procedure for final drawing   
following the job requirements.
Performed page set-up and scaling procedure   
based on technical drawing requirements.

Date Developed: Document No.


Technical Drafting NC II
OCTOBER 2017 Issued by:
Demonstration
PGT-TPNP Page
Checklist Developed by: 12
Assessment Tools DANIEL D. REYES Original #00
Performed layout and produce computer-aided   
drawings and details. *
Performed saving and backup procedure for   
final working drawing.
Performed plotting procedure according to   
standard.
Submitted complete drawing to personnel   
following SOP. *
Performed housekeeping procedure following   
SOP
The trainee’s demonstration was:
 Satisfactory  Not Satisfactory

Trainee’s Signature Date:

Trainer’s Signature Date:

Date Developed: Document No.


Technical Drafting NC II
OCTOBER 2017 Issued by:
Demonstration
PGT-TPNP Page
Checklist Developed by: 13
Assessment Tools DANIEL D. REYES Original #00

You might also like