VIACRETE system data sheet
VIACRETE MF standardVM
HACCP International certified, medium duty, self-smoothing, seamless, antimicrobial, odourless,
solvent free polyurethane concrete flooring system with excellent chemical resistance and
smooth matt coloured finish
SYSTEM BUILD-UP SYSTEM THICKNESS 3.0 – 6.0* mm
Wear coat coloured:
VIACRETE PU-MFVM
Primer for cementitious substrates:
VIACRETE PU-MFVM
Substrate:
Concrete, cementitious screed and others
* for system thickness >4mm a two layer application is recommended
SYSTEM HIGHLIGHTS APPLICATION FIELDS
HACCP International certified Dry or moderate wet processing zones
Incorporates antimicrobial additive which Food & beverage production facilities
inhibits the growth of bacteria, fungi, moulds Dairy production
and mildew Warehouse & distribution centres
Low emission tested according AgBB Foodstuff preparation
guidelines and other European standards as Dry production facilities
M1 classification
SYSTEM BENEFITS
HACCP International certified
Odourless, non-tainting to food
Seamless finish
Easy to clean and low maintenance
Fast return to service
Available in many colours
High impact resistance
High abrasion resistance
High chemical resistance
Fire resistance class Bfl-S1
Manufacturer:
VIACOR Asia Sdn Bhd., No. 5 Jalan Sungai Terap 32/182, Bukit Rimau Industrial Park, 40460 Shah Alam, Selangor Darul Ehsan, Malaysia,
tel: +603 5131 7777, fax: +603 5131 7878, email: [email protected], www.viacor.asia – A division of VIACOR Polymer GmbH Germany
Page 1/2 version no. 8 issue: 07-2019
VIACRETE system data sheet
VIACRETE MF standardVM
SUBSTRATE REQUIREMENT
Cementitious substrates according to the appropriate standards and approvals must be capable of bearing loads and be free of cracks and voids.
Pull-off strength ≥ 1.5 N/mm², residual moisture content < 4 %-CM, with higher residual moisture and on substrates with moisture from the slab
special measures must be taken or a damp proof membrane must be installed. Substrate preparation e.g. grinding or shot blasting, sweeping
and vacuum-cleaning is mandatory. Consumptions are calculated with VIASOL quartz sands and fillers. Usage of other quartz sands and fillers
can cause changes of consumption and technical data.
Detailed application instructions are available upon request or refer to the technical product data sheet.
TECHNICAL DATA
property standard result
Compressive strength EN 196 / ASTM C190 ≥ 50 N/mm²
Adhesive strength EN ISO 4624 >1.5 N/mm²
Shore-Hardness EN ISO 868 D 75 after 28 d
Heat resistance -15°C to +90°C
Impact strength EN 13813 ≥ 4 Nm (IR4)
Japanese Industrial After 60 wash cycles 99.9%
Anti-microbial
Standard JIS Z 2801:2000 microbial growth reduction
Flexural strength ASTM C 348 >20 N/mm²
Tensile strength EN 196 / ASTM C109 >10 N/mm²
Coefficient of thermal expansion ASTM C531 5.8 x 10-5/°C
TRRL pendulum slip test dry > 70, wet > 21
Slip resistance
DIN 51130 R9
Fire resistance EN13501-1 Bfl-S1
Remark: for further information please refer to the product data sheets or contact our technical service. All data are approximate values. Therefore no liability claims
can be derived from the system data sheet. As all VIACOR data sheets are updated on a regular basis it is the users responsibility to obtain the most recent issue (see
www.viacor.asia or contact us directly)– all technical information is subject to change without prior notice
VIACOR products are guaranteed against defective material and manufacture and are sold subject to its standard Terms and Conditions of Sale, copies which can be
obtained on request.
Manufacturer:
VIACOR Asia Sdn Bhd., No. 5 Jalan Sungai Terap 32/182, Bukit Rimau Industrial Park, 40460 Shah Alam, Selangor Darul Ehsan, Malaysia,
tel: +603 5131 7777, fax: +603 5131 7878, email: [email protected], www.viacor.asia – A division of VIACOR Polymer GmbH Germany
Page 2/2 version no. 8 issue: 07-2019
