Series

Series

VHF AND UHF TRANSCEIVERS

An Ideal Balance of
Features, Performance and Value
The IC-F5020/F6020 series is ideal for small-to-mid sized systems for public service, large industry to light
commercial users. The IC-F5020 series offers multiple signaling, advanced scanning, improved external chan-
nel control capability and wide frequency coverage packed in a compact body. This rugged mobile will easily
exceed your expectations with its reliable performance and communication quality.

128 channel capacity with 8 zones MIL-STD-810 F rugged construction

Built-in 2-Tone, 5-Tone, CTCSS and 50 W (VHF), 45 W (UHF) (USA/EXP versions),

DTCS (analog mode) 25 W (EUR/EXP versions) RF output power

MDC 1200 compatible Lone worker function

Loud and clear 4 watts (typical) External memory channel control with
front mounted speaker optional ACC cable

IC-F5020 series
FEATURES

128 memory channels Lone worker function

128 channels (Max.) separated into 8 memory zones. Memory When the radio is not operated for a preset period, the radio
channels can be identified with the 8-character channel name sounds a beep and requires you to push any button. If the
and selected easily with the up/down buttons. radio is still not operated for a specified wait period, an emer-
gency signal automatically transmits and informs co-workers
that something may have happened to the individual worker.

Mode dependent scan

In the mode dependent setting, the scanning setting is de-
pendent on the operating channel. When you change the op-
erating channel, the scanning list automatically changes to
the list set for that channel. It is convenient when you move to
Front mounted speaker a different operating area that may require a different operat-
4 watts (typ.) front mounted speaker delivers clear and loud ing channel. No need to change the scanning setting.
audio. With the speaker facing the operator, audio can be
TX channel setting and Talk back function
clearly heard without impediment during operation.
The TX channel setting allows you to program a transmission
6 programmable buttons channel while scanning. Start channel, last detected chan-
A pair of up/down and P0–P3 function assignable buttons nel, priority and pre-programmed channel are selectable.
allow you to customize functions to meet specific needs. An Prior to the TX channel setting, the talk back function allows
independent volume knob offers simple, convenient operation. you to talk on the last detected channel, while scanning re-
sumes after a preset time. The user can easily make a quick
MIL grade rugged construction response with this function.
The tough aluminum die-cast chassis and polycarbonate
front panel have been tested to the MIL standard 810-F. With Wide frequency coverage
this heavy-duty construction, the IC-F5020 series provides The IC-F5020 series covers a wide frequency range in one
reliable operation over the long term in all manners of rugged version (VHF 136–174 MHz, UHF 400–470, 450–520 or 450–512
environments. MHz).

Most popular signalings built-in External memory channel

Use the built-in 2-Tone, 5-Tone, CTCSS and DTCS capabili- control with optional ACC cable
ties as standard to set up your own talk groups, PTT ID and With the optional OPC-1939 D-SUB 15-pin ACC cable, the
quiet stand-by when others are talking. The IC-F5020 series IC-F5020 series can be pro-
also has CTCSS/ DTCS high speed decode and 2-Tone de- grammed to control an operat-
code accuracy. ing channel from an external
device (up to 16 pre-programmed
MDC 1200 compatible channels). The ACC connector
The following MDC features are available with the built-in also provides an ignition sens-
MDC signaling. ing function, external PTT, PC
• PTT ID (TX/RX) • Radio check (RX) command, horn honk, audio Photo includes optional OPC-1939
• Radio stun (RX) • Radio revive (RX) output and modulated signal
• Emergency TX/RX (No ACK) input depending on programming.
• 5 alias table (Max.)
Other features
Multiple 2-Tone, Multiple 5-Tone • Embedded ESN
Up to ten 2-Tone and eight 5-Tone codes can be decoded on • ±2.5 ppm frequency stability
a channel. When a matched tone is received, the following • Microphone hanger action programmable
items are programmable for each code. • Optional DTMF microphone (HM-152T)
• Beep sound • Answer back • 8 DTMF autodial memories
• Scan • Bell icon • BIIS 1200 PTT ID transmission
• Radio stun/kill/revive • Power-on password function
• Nuisance delete function
Radio kill, stun and revive • Time-out-timer and Lock-out penalty timer
The radio kill/stun functions disable a lost or stolen radio over
the air, eliminating security threats from undesired listeners.
When the stun command is received, all functions will be tem-
porary locked out until the revive command is received or the
unlock password is entered.

Please check the website for the latest version of this brochure at www.icom.co.jp/world
SPECIFICATIONS

IC-F5021 (USA) IC-F5022 (EUR) IC-F6021 (USA) IC-F6022 (EUR)

IC-F5023H (EXP) IC-F5023 (EXP) IC-F6023H (EXP) IC-F6023 (EXP)
GENERAL
Frequency coverage* 400–470 MHz (ALL),
136–174 MHz
(* Depending on version) 450–512 MHz (USA), 450–520 MHz (EXP)
Number of channels Max. 128 channels /8 zones
Type of emission* 16K0F3E*1, 11K0F3E (USA, EXP)
(* Depending on version) 16K0F3E, 14K0F3E, 8K50F3E (EUR)
13.6 V DC nominal (USA, EXP)
Power supply requirement
13.2 V DC nominal (EUR)
TX 10 A (at 50 W) 5 A (at 25 W) 11 A (at 45 W) 5 A (at 25 W)
Current drain (approximate)
RX 700 mA /250 mA (Max. audio/Standby)
Antenna impedance 50 Ω (SO-239) (USA, EXP), 50 Ω (BNC) (EUR)
–30 °C to +60 °C; –22 °F to +140 °F (USA, EXP)
Operating temperature range
–25 °C to +55 °C; –13 °F to +131 °F (EUR)
Dimensions (W × H × D; 50/45 W version 150 × 40 × 167.5 mm; 5.9 × 1.6 × 6.6 in
Projections not included) 25 W version 150 × 40 × 117.5 mm; 5.9 × 1.6 × 4.6 in
50/45 W version 1.1 kg; 2.4 lb
Weight (approximate)
25 W version 0.8 kg; 1.8 lb
TRANSMITTER
25 W, 10 W, 6 W (EUR) 25 W, 10 W, 6 W (EUR)
Output power (Hi, L2, L1) 50 W, 25 W, 5 W 45 W, 25 W, 4.5 W
25 W, 10 W, 2.5 W (EXP) 25 W, 10 W, 2.5 W (EXP)
Maximum frequency deviation ±5.0 kHz (@25 kHz), ±4.0 kHz (@20 kHz), ±2.5 kHz (@12.5 kHz)
±2.5 ppm (USA, EXP)
Frequency stability
±1.5 kHz (EUR)
70 dB typ. (USA, EXP)
Spurious emissions
0.25 μW (≤ 1GHz), 1.0 μW (> 1GHz) (EUR)
FM hum and noise 46 dB typ. (@25 kHz), 40 dB typ. (@12.5 kHz) (USA, EXP)
Residual modulation 55 dB typ. (@25 kHz), 53 dB typ. (@20 kHz), 50 dB typ. (@12.5 kHz) (EUR)
Audio harmonic distortion 3% typ. (AF 1kHz 40% deviation)
Modulation limiting 70–100% of Maximum deviation
External microphone impedance 600 Ω (8-pin modular)
RECEIVER
(at 12 dB SINAD) 0.25 μV typ. (USA, EXP)
Sensitivity
(at 20 dB SINAD) –4 dBμV emf. typ. (EUR)
Adjacent channel selectivity 75 dB typ. (@25/20 kHz), 65 dB typ. (@12.5 kHz)
Spurious response rejection 80 dB typ.
75 dB typ. (USA, EXP)
Intermodulation rejection
67 dB typ. (EUR)
45 dB typ. (@25 kHz), 40 dB typ. (@12.5 kHz) (USA, EXP)
Hum and noise
55 dB typ. (@25 kHz), 53dB typ. (@20 kHz), 50 dB typ. (@12.5 kHz) (EUR)
Audio output power 4.0 W typ. (at 5% distortion with 4 Ω load)
External speaker connector 2-conductor 3.5 (d) mm (1⁄8ʺ)/4 Ω
Measurements made in accordance with TIA-603 or EN 300 086.
All stated specifications are subject to change without notice or obligation.
*1 25 kHz bandwidth is no longer available for FCC Part 90 licensees for USA versions.

Applicable U.S. Military Specifications & IP Rating

MIL 810 F
Standard
Method Procedure
Low Pressure 500.4 I, II
High Temperature 501.4 I, II
Low Temperature 502.4 I, II
Temperature Shock 503.4 I
Solar Radiation 505.4 I
Humidity 507.4 –
Settling Dust 510.4 III
Vibration 514.5 I
Shock 516.5 I, IV
Also meets equivalent MIL-STD-810-C, -D and -E.

Supplied Accessories
• Hand microphone (HM-152) • DC power cable • Mounting bracket kit
• Microphone hanger • Key assign stickers

Please check the website for the latest version of this brochure at www.icom.co.jp/world
OPTIONS

■ HAND MICROPHONES AND DESKTOP MICROPHONE

HM-148G: Heavy duty microphone. IP54 protection.
HM-148T: Heavy duty microphone with DTMF keypad. IP54 protection.
HM-152: Hand microphone with emergency button.
HM-152T: Hand microphone with DTMF keypad.
SM-26: Desktop microphone with monitor and monitor lock buttons.

HM-148G HM-148T HM-152 HM-152T SM-26

■ EXTERNAL SPEAKERS
SP-35/L: Compact external speaker.
SP-35 cable length: 2 m; 6.6 ft.
SP-35L cable length: 6 m; 19.7 ft.

SP-35/SP-35L

■ ACC CABLES
OPC-1939: ACC cable enables you to connect an
external terminal. D-SUB 15-pin type.
OPC-2078: ACC cable enables you to connect an
external terminal. D-SUB 25-pin type. OPC-1939
15-pin type

OPC-2078
25-pin type

■ PROGRAMMING SOFTWARE AND CABLE

CS-F5020: Programming software.
OPC-1122U: Programming cable. (USB type)

Some options may not be available in some countries. Please ask your dealer for details.

Icom, Icom Inc. and the Icom logo are registered trademarks of Icom Incorporated (Japan) in Japan, the United States, the United Kingdom, Germany, France, Spain, Russia, Australia, New Zealand and/or other countries.
All other trademarks are the properties of their respective holders.

1-1-32, Kamiminami, Hirano-Ku, Osaka 547-0003, Japan Phone: +81 (06) 6793 5302 Fax: +81 (06) 6793 0013 www.icom.co.jp/world Count on us!

www.icomamerica.com www.icomeurope.com www.icom.net.au Your local distributor/dealer:

www.icomspain.com
www.icomcanada.com www.asia-icom.com

www.icomuk.co.uk
E-mail: [email protected] www.bjicom.com
www.icom-france.com
17XKQ513A © 2017 Icom Inc. Printed in Japan