Notification

Public Address & Voice Alarm

Systems

Product catalog
Valid from May 2018

1
Contents 1 VARIODYN D1 3-58
General 4-5
Digital Output Module 6-7
VARIODYN D1 Comprio 8-15
Loop Technology LIM 16-17
Power Amplifier 18-21
Digital Call Station 22-32
Mains Switching Unit 33
System Communication Unit 34
Universal Interface Module 35-36
Additional Components / Audio Devices 37
Power Supply 38-40
Accessories 41-46
Surge Protection Module 47-48
FACP Interface 49-51
VARIODYN D1 PAMMI Plus 52-54
Cable Overview 55-58

2 Sound System 59-60

Sound System 60

3 Loudspeaker EN 54-24 61-80

Ceiling Loudspeaker 62-68
Cabinet Loudspeaker 69-73
Horn Loudspeaker 74-76
Sound Projector 77-78
Spherical Loudspeaker 79
Column Loudspeaker 80

4 Standard Loudspeaker 81-87

Ceiling Loudspeaker 82
Wall Surface Moubted Loudspeaker 83-84
Sound Projector 85
Spherical Loudspeaker 85
Horn Loudspeaker 86
Music Cabinet Loudspeaker 87
Accessories 87

5 Volume Regulators 88-89

Volume Regulators 89

6 Passive Beam Steering Systems 91-96

LEN-20 92
LEN-60 93
LEN-100 94
LEN-150 95
LEN-220 96

7 Index 97-101
Part Number Index 98
Keyword Index 99-101
 1

VARIODYN D1 General 4-5

Digital Output Module 6-7
VARIODYN D1 Comprio 8-15
Loop Technology LIM 16-17
Power Amplifier 18-21
Digital Call Station 22-32
Mains Switching Unit 33
System Communication Unit 34
Universal Interface Module 35-36
Additional Components / Audio Devices 37
Power Supply 38-40
Accessories 41-46
Surge Protection Module 47-48
FACP Interface 49-51
VARIODYN D1 PAMMI Plus 52-54
Cable Overview 55-58

3
 VARIODYN D1

CD Player

UIM

Serial Fire
Interface Alarm
Control
Panel

PC TS Call Station
LAN TCP/IP*
*fiber optic
DCS15, redundant

COMPRIO
Power Amplifier

Configuration
via Service PC

Central Operator Terminal

SCU

DOM
DCSF12 Power Amplifier
Digital Fire Control PA Panel redundant
UIM
PSU
DOM Digital Output Module
UIM Universal Interface Module
Batteries
FACP Fire Alarm Control Panel
DCS15 Digital Call Station
SCU System Communication Unit
System VARIODYN
DAL (Digital Audio Link) Serial Data Connection or any other
Ethernet FACP Loop PAVA / Pro sound system
Direct Connection

4 www.hls-austria.com
VARIODYN D1 General

1
VARIODYN D1 DOM firmware allows to connect ​up to 400 units and get advantage of the
new logical functions, which make it much easier and ​efficient to configure the DOM. With
the firmware comes also the option to connect call stations ​with a second cable. So it is now
possible to do the cable connection to the call station in a ​redundant way. 2

VARIODYN D1 Designer, our graphical ​configuration tool, includes now cutting edge
Boolean algebra like "and" and "or" functions ​to program advanced logical dependency. The
program provides now some improved ​functions and features as well. We suggest to always 3
use the latest edition for your projects.

The new DCS plus call station with DKM plus button extension offers a proven and 4
increased handling for operators. It uses similar functions ​like DCS15 but an additional red
LED ring, close to the microphone capsule, visualy signalize ​“readines to speak” also an
additional LED shows fault of the system.
5
Our management system PAMMI is now in a new version available and enables the use of a ​
microphone on the PC hosting the PAMMI software.

Please also refer to the information we have provided online. In the ​protected customer 6
area, there are a wide range of resources relating to system setup and ​planning available
for download. Finally, we would like to mention that it is always a good idea to ​view the
areas of fire detection technology and voice alarm as a whole. For that reason, we also ​ 7
provide serial interfaces with great benefits in security and ​service.

5
 VARIODYN D1 Digital Output Module

583361.22 Digital Output Module DOM4-8

1

Part of EN 54-16 approval

The DOM (Digital Output Module) is the central control element of VARIODYN D1. It has interfaces ​
Features to all input/output assemblies, administers, and monitors the loudspeaker circuits for voice alarm ​
systems and electro-acoustic emergency warning system per EN 60849 and EN 50849. Large or ​
• Compliant with EN 60849 and EN 50849 complex system configurations can be implemented through the networking of multiple DOMs via ​
• EN 54-16 certified Ethernet. The DOM offers a high level of automatic and constant monitoring as standard. All ​
• 16 audio slots giving a total of 1 hour memory connected power amplifiers are permanently monitored by the DOM and if.a power amplifier ​
• 4 independent amplifier channels suitable for use with ​ becomes faulty, it can be replaced dynamically by a backup amplifier or a backup amplifier ​
spurs, zones or loop technology. Built in parametric ​ channel. The switchover is done automatically by the DOM. The loudspeaker lines are ​perma-
equalizer, compressor limiter and delay function (upto ​ nently monitored for short circuit, ground fault, and failure as well as impedance deviation. ​Faulty
9.9 seconds) loudspeaker zones are separated in a non-reacting manner. A DOM contains storage ​capacity for
• All functions of an alarm and evacuation system preset announcements, which can be used for alarm texts and signals (escape alarm, ​caution
• Network into a large system via Ethernet connection signal) and warning signals (gongs). The volume of each source and each amplifier ​channel can
• Offers full monitoring of the system functions be controlled. Additional filters like parametric equalizer, high-and low pass filter are ​available. All
• Automatic and dynamic switching to redundant emer­ errors are recognized, displayed and recorded within few seconds meeting the ​standards. For
gency amplifiers special applications such as e.g. tunnel, a delay in all four channels can be ​programmed up to 9.9
• Automatic volume control (AVC) even during announ­ sec.
cements With the available firmware it is to connect up to 400 units and get advantage of the ​logical func-
• Remote monitoring and configuration via the network tions which make it much easier and efficient to configure the DOM.
• 24 V DC emergency power supply
The control unit DOM4-8 is equipped with 4 independent amplifier channels in order to operate 8 ​
loudspeaker areas or 4 loudspeaker circuits in VARIODYN D1 loop technology. There is also the ​
option of mixing loop and spur technology with a DOM.
Technical Data
Audio output:
Output type symmetrically
Nominal level 0 dBu
max. Outputlevel < 6 dBu
Transmission range 20 ... 20000 Hz
Harmonic distortion at nominal level < 0.03 % @ 1 kHz
Signal/Noise ratio > 70 dB/75 dB (A)
Output impedance > 5 kΩ, < 500 pF
Sensor Input (AVC):
Input type symmetrically
Nominal level -51 dBu
Nominal level for emergency telephone station 0 dBu
Transmission range 100 ... 8000 Hz
Harmonic distortion at nominal level < 0.02 % @ 1 kHz
Signal/Noise ratio > 60 dB/65 dB (A)
Load impedance typ. 200 Ω
Common technical data:
Rated voltage 90 .. 264 V AC
Rated frequency 47 ... 63 Hz
Emergency power supply 24 V DC
Power consumption 40 / 70 W (@230 V, w/o / with 4 x DAL)
Contact load relay 100 V DC/1 A
Ambient temperature -5 °C ... 55 °C
Air humidity 15 ... 90 % (non-condensing)
Weight approx. 5.7 kg
Dimensions W: 483 mm H: 44 mm D: 345 mm (1 HU, 19")
Declaration of Performance DoP-20997130701

Accessories
583451.21 Cable for cabinet rear panel DOM4-8
583486A Patch cable CAT5, 1 m yellow (Ethernet)
583487A Patch cable CAT5, 2 m yellow (Ethernet)
583488A Patch cable CAT5, 3 m yellow (Ethernet)
583496 End-of-line module (EOL)
581310 Measuring microphone for D1 AVC in a 5’’ recessed ceiling housing
581316 Microphone, for AVC
583703 Mounting set 1
583342 Loop Isolator Module
583708.HO Ventilation panel 1 HU with Honeywell logo

6 www.hls-austria.com
VARIODYN D1 Digital Output Module

583362.22 Digital Output Module DOM4-24 1

1

Part of EN 54-16 approval

The DOM (Digital Output Module) is the central control element of VARIODYN D1. It has interfaces ​ 2
Features to all input/output assemblies, administers, and monitors the loudspeaker circuits for voice alarm ​
systems and electro-acoustic emergency warning system per EN 60849 and EN 50849. Large or ​
• Compliant with EN 60849 and EN 50849 complex system configurations can be implemented through the networking of multiple DOMs via ​
• EN 54-16 certified Ethernet. The DOM offers a high level of automatic and constant monitoring as standard. All ​ 3
• 16 audio slots giving a total of 1 hour memory connected power amplifiers are permanently monitored by the DOM and if.a power amplifier ​
• 4 independent amplifier channels suitable for use with ​ becomes faulty, it can be replaced dynamically by a backup amplifier or a backup amplifier ​
spurs, zones or loop technology. Built in parametric ​ channel. The switchover is done automatically by the DOM. The loudspeaker lines are ​perma-
equalizer, compressor limiter and delay function (upto ​ 4
nently monitored for short circuit, ground fault, and failure as well as impedance deviation. ​Faulty
9.9 seconds) loudspeaker zones are separated in a non-reacting manner. A DOM contains storage ​capacity for
• All functions of an alarm and evacuation system preset announcements, which can be used for alarm texts and signals (escape alarm, ​caution
• Network into a large system via Ethernet connection signal) and warning signals (gongs). The volume of each source and each amplifier ​channel can 5
• Offers full monitoring of the system functions be controlled. Additional filters like parametric equalizer, high-and low pass filter are ​available. All
• Automatic and dynamic switching to redundant emer­ errors are recognized, displayed and recorded within few seconds meeting the ​standards. For
gency amplifiers special applications such as e.g. tunnel, a delay in all four channels can be ​programmed up to 9.9
• Automatic volume control (AVC) even during announ­ sec. 6
cements With the new Firmware it is now possible to connect up to 400 units and get advantage of the new ​
• Remote monitoring and configuration via the network logical functions which makes it much easier and efficient to configure the DOM.
• 24 V DC emergency power supply
7
The control unit DOM4-24 is equipped with 4 independent amplifier channels in order to operate 24 ​
loudspeaker areas or 4 loudspeaker circuits in VARIODYN D1 loop technology. There is also the ​
option of mixing loop and spur technology with a DOM
Technical Data
Audio output:
Output type symmetrically
Nominal level 0 dBu
max. Outputlevel < 6 dBu
Transmission range 20 ... 20000 Hz
Harmonic distortion at nominal level < 0.03 % @ 1 kHz
Signal/Noise ratio > 70 dB/75 dB (A)
Output impedance > 5 kΩ, < 500 pF
Sensor Input (AVC):
Input type symmetrically
Nominal level -51 dBu
Nominal level for emergency telephone station 0 dBu
Transmission range 100 ... 8000 Hz
Harmonic distortion at nominal level < 0.02 % @ 1 kHz
Signal/Noise ratio > 60 dB/65 dB (A)
Load impedance typ. 200 Ω
Common technical data:
Rated voltage 90 .. 264 V AC
Rated frequency 47 ... 63 Hz
Emergency power supply 24 V DC
Power consumption 50 / 80 W (@230 V, w/o / with 4 x DAL)
Contact load relay 100 V DC/1 A
Ambient temperature -5 °C ... 55 °C
Air humidity 15 ... 90 % (non-condensing)
Weight approx. 6.8 kg
Dimensions W: 483 mm H: 44 mm D: 349 mm (1 HU, 19")
Declaration of Performance DoP-20997130701

Accessories
583452.21 Cable for cabinet rear panel DOM4-24
583486A Patch cable CAT5, 1 m yellow (Ethernet)
583487A Patch cable CAT5, 2 m yellow (Ethernet)
583488A Patch cable CAT5, 3 m yellow (Ethernet)
583496 End-of-line module (EOL)
581310 Measuring microphone for D1 AVC in a 5’’ recessed ceiling housing
581316 Microphone, for AVC
583703 Mounting set 1
583342 Loop Isolator Module
583708.HO Ventilation panel 1 HU with Honeywell logo

7
 VARIODYN D1 VARIODYN D1 Comprio

VARIODYN D1 Comprio
Our VARIODYN D1 Voice Alarm System has grown, so that in the future Of course, all peripheral components and accessory parts
it can be even better, even more cost effective, and even more efficient of the VARIODYN D1, such as call stations, housing, converter,
in small and medium-sized properties. The compact Comprio control unit is cable, etc., can also be used with these new components.
available in different variants, and together with the new 4XD125B and The programming is still carried out easily and conveniently
4XD250B four-channel amplifiers, it represents a complete voice alarm using the Designer software tool. An VARIODYN D1 expert can jump
system for small and medium-sized properties. into the Comprio at full speed without any additional effort and use
The 4XD125B and 4XD250B four-channel amplifiers also includes a battery the new components with no problems. That saves time, money,
charger for the emergency power supply of this small system. The new warehouse space, and minimizes additional training costs.
amplifiers also provide the option to use one channel as backup amplifier If desired, the Part No. 583308 handheld microphone can be plugged
for the other three channels. In this case a separate backup amplifier is no directly into the Comprio.
longer required.. The components are designed for installation in a 19"
housing or upright cabinet. We have provided special compact housing
variants with 12 HU each. If desired, these components can also be housed Comprio system (4 variants)
in the larger housings and upright cabinets of our VARIODYN D1 line 583940 VARIODYN D1 Comprio 4-8 (standalone without ethernet)
together with the other DOM and amplifiers. 583941 VARIODYN D1 Comprio 4-24 (standalone without ethernet)
The new components are integrated in the product approval of the 583944 VARIODYN D1 Comprio 4-8 net (network variant)
VARIODYN D1 Voice Alarm System. 583945 VARIODYN D1 Comprio 4-24 net (network variant)

Rack mounted system (12 HUs) System overview

8 or 24 speaker lines

Use of the different HUs HU 1 to 12

HU 1
Free HU 2
HU 3
HU 4
Control
HU 5
unit
HU 6
4XD125B HU 7
HU 8
HU 9
Battery HU 10
HU 11
HU 12

8 www.hls-austria.com
VARIODYN D1 VARIODYN D1 Comprio

583940 VARIODYN D1 Comprio 4-8 (Stand alone without Ethernet) 1

1

Part of EN 54-16 approval

2
Comprio is the central control panel of a VARIODYN D1 system for small and medium sized ​
projects. When combined with the 4XD125B or 4XD250B four channel amplifiers, they provide a ​
complete voice alarm system for projects such as schools and small hotels. The emergency power ​
supply is integrated into the 4XD125B and 4XD250B four channel amplifiers. The system is ​ 3
compliant with voice alarm standards and elector-acoustic emergency warning systems DIN VDE ​
0833-4, EN 60849 and EN 50849.
All amplifiers are permanently monitored and in the case of a fault a backup amplifier can ​auto- 4
Features matically replace it. If a 4XD125B or 4XD250B amplifier is used it is possible to use three ​channels
to power the speaker zones and use the fourth channel as a backup amplifier. All ​loudspeaker
• One hour audio memory (flash) zones are permanently monitored for short circuit, ground fault, failures and ​impedance deviation.
• 4 channel parametric equalizer, compressor/limiter ​ Faulty loudspeaker zones are separated in a non-reactive manner. Any ​errors are recognized, 5
and delay (up to 9.9 seconds) displayed and recorded within seconds, ensuring all relevant standards are ​met.
• Loudspeaker LOOP support The Comprio control panel contains storage capacity pre-recorded audio messages which can be ​
• EN 54-16 certified used for alarm texts and signals (evacuation alarm/ all clear signals) and caution signals (gongs). ​
• Compliant with EN 60849 and EN 50849 The volume of each source and each amplifier channel can be controlled. Additional filters such as ​ 6
• All functions of an alarm and evacuation system parametric equalizer, high-and low pass filter can be programmes. For special applications such as ​
• Permanent monitoring of all functions tunnels a delay is available of to 9.9 seconds can be programmed.
• Automatic and dynamic switching of back up amplifier The Comprio control panel can be connected to four independent amplifier channels to operate a ​
• Automatic volume control (AVC) even also during ​ 7
total of 8 loudspeaker zones or four loudspeaker rings in VARIODYN D1 loop technology. It is also ​
announcements possible to mix spur and loop technology.
• Two monitored 24 V DC power supply inputs The Comprio further features 12 contact inputs, of which eight can be programmed with ​supervi-
• 12 contact inputs (8 of which can be monitored) sion, 8 potential-free relay outputs, an audio line out and up to 2 audio line in ports, and / or ​up to 3
• 8 relay outputs microphone inputs, 3 DAL connections, and one TWI port.
• 1 audio output and 2 audio inputs This variant is a "stand-alone" unit. If Ethernet networking is desired to connect with other Comprio ​
• 3 DAL port control panels or DOM, the network variant Part No. 583944 should be ordered.
• 1 TWI port Additional accessories like the handheld microphone, housing, cable, call station etc. must be ​
ordered separately.

Technical Data
Transmission range 20 ... 20000 Hz
Load impedance typ. 200 Ω
Harmonic distortion at nominal level < 0.03 %
Ambient temperature -5 °C ... 55 °C
Storage temperature -10 °C ... 60 °C
Air humidity 15 ... 90 %
Weight approx. 5.7 kg
Dimensions W: 483 mm H: 133 mm D: 345 mm (3 HE, 19")
Declaration of Performance DoP-00376130701

Accessories
583708.HO Ventilation panel 1 HU with Honeywell logo
583308 Handheld microphone for VARIODYN D1 Comprio
583441.10 Backup cable RC41 VARIODYN D1
584913 Rack for Comprio
584913.R Rack for Comprio (mounting included)
583414 Cable set 24 V DC-VARIODYN D1 Comprio / 4XD125B or 4XD250B
581732 Battery 12 V / 65 Ah
581340 Periphery clamp for top-hat rail
583466A Patch cable CAT5, 0.5 m gray (periphery)
583467A Patch cable CAT5, 1 m gray (periphery)
583469A Patch cable CAT5, 3 m gray (periphery)
583483 Patch cable CAT5, 3 m blue (DAL)
583451.21 Cable for cabinet rear panel DOM4-8
583477.21 Output cable 2 amplifier DOM
583491 Input cable DOM amplifier, 0.5 m green
583496 End-of-line module (EOL)
581310 Measuring microphone for D1 AVC in a 5” recessed ceiling housing
581316 Microphone, for AVC
583703 Mounting set 1
583332 Overvoltage protection for UIM contacts

9
 VARIODYN D1 VARIODYN D1 Comprio

583941 VARIODYN D1 Comprio 4-24 (Stand alone without Ethernet)

1

Part of EN 54-16 approval

Comprio is the central control panel of a VARIODYN D1 system for small and medium sized ​
projects. When combined with the 4XD125B or 4XD250B four channel amplifiers, they provide a ​
complete voice alarm system for projects such as schools and small hotels. The emergency power ​
supply is integrated into the 4XD125B and 4XD250B four channel amplifiers. The system is ​
compliant with voice alarm standards and elector-acoustic emergency warning systems DIN VDE ​
0833-4, EN 60849 and EN 50849.
All amplifiers are permanently monitored and in the case of a fault a backup amplifier can ​auto-
matically replace it. If a 4XD125B or 4XD250B amplifier is used it is possible to use three ​channels
Features to power the speaker zones and use the fourth channel as a backup amplifier. All ​loudspeaker
• One hour audio memory (flash) zones are permanently monitored for short circuit, ground fault, failures and ​impedance deviation.
• 4 channel parametric equalizer, compressor/limiter ​ Faulty loudspeaker zones are separated in a non-reactive manner. Any ​errors are recognized,
and delay (up to 9.9 seconds) displayed and recorded within seconds, ensuring all relevant standards are ​met.
• Loudspeaker LOOP support The Comprio control panel contains storage capacity pre-recorded audio messages which can be ​
• EN 54-16 certified used for alarm texts and signals (evacuation alarm/ all clear signals) and caution signals (gongs). ​
• Compliant with EN 60849 and EN 50849 The volume of each source and each amplifier channel can be controlled. Additional filters such as ​
• All functions of an alarm and evacuation system parametric equalizer, high-and low pass filter can be programed. For special applications such as ​
• Permanent monitoring of all functions tunnels a delay is available of to 9.9 seconds can be programmed.
• Automatic and dynamic switching of back up amplifier The Comprio control panel can be connected to four independent amplifier channels to operate a ​
• Automatic volume control (AVC) even also during ​ total of 24 loudspeaker zones or four loudspeaker rings in VARIODYN D1 loop technology. It is ​
announcements also possible to mix spur and loop technology.
• Two monitored 24 V DC power supply inputs The Comprio further features 12 contact inputs, of which eight can be programmed with ​supervi-
• 12 contact inputs (8 of which can be monitored) sion, 8 potential-free relay outputs, one audio line out and up to 2 audio line in ports, and / ​or up to
• 8 relay outputs 3 microphone inputs, 3 DAL connections, and one TWI port.
• 1 audio output and 2 audio inputs This variant is a "stand-alone" unit. If Ethernet networking is desired to connect with other Comprio ​
• 3 DAL port control panels or DOM, the network variant Part No. 583944 should be ordered.
• 1 TWI port Additional accessories like the handheld microphone, housing, cable, call station etc. must be ​
ordered separately.

Technical Data
Transmission range 20 ... 20000 Hz
Load impedance typ. 200 Ω
Harmonic distortion at nominal level < 0.03 %
Ambient temperature -5 °C ... 55 °C
Storage temperature -10 °C ... 60 °C
Air humidity 15 ... 90 %
Weight approx. 6.8 kg
Dimensions W: 483 mm H: 133 mm D: 345 mm (3 HE, 19")
Declaration of Performance DoP-00376130701

Accessories
583708.HO Ventilation panel 1 HU with Honeywell logo
583308 Handheld microphone for VARIODYN D1 Comprio
583441.10 Backup cable RC41 VARIODYN D1
584913 Rack for Comprio
584913.R Rack for Comprio (mounting included)
583414 Cable set 24 V DC-VARIODYN D1 Comprio / 4XD125B or 4XD250B
581732 Battery 12 V / 65 Ah
581340 Periphery clamp for top-hat rail
583466A Patch cable CAT5, 0.5 m gray (periphery)
583467A Patch cable CAT5, 1 m gray (periphery)
583469A Patch cable CAT5, 3 m gray (periphery)
583483 Patch cable CAT5, 3 m blue (DAL)
583452.21 Cable for cabinet rear panel DOM4-24
583477.21 Output cable 2 amplifier DOM
583491 Input cable DOM amplifier, 0.5 m green
583496 End-of-line module (EOL)
581310 Measuring microphone for D1 AVC in a 5” recessed ceiling housing
581316 Microphone, for AVC
583703 Mounting set 1
583332 Overvoltage protection for UIM contacts

10 www.hls-austria.com
VARIODYN D1 VARIODYN D1 Comprio

583944 VARIODYN D1 Comprio 4-8 net (with Ethernet) 1

1

Part of EN 54-16 approval

Comprio is the central control panel of a VARIODYN D1 system for small and medium sized ​
2
projects. When combined with the 4XD125B or 4XD250B four channel amplifiers, they provide a ​
complete voice alarm system for projects such as schools and small hotels. The emergency power ​
supply is integrated into the 4XD125B and 4XD250B four channel amplifiers. The system is ​ 3
compliant with voice alarm standards and elector-acoustic emergency warning systems DIN VDE ​
0833-4, EN 60849 and EN 50849.
All amplifiers are permanently monitored and in the case of a fault a backup amplifier can ​auto-
matically replace it. If a 4XD125B or 4XD250B amplifier is used it is possible to use three ​channels 4
Features to power the speaker zones and use the fourth channel as a backup amplifier. All ​loudspeaker
• One hour audio memory (flash) zones are permanently monitored for short circuit, ground fault, failures and ​impedance deviation.
• 4 channel parametric equalizer, compressor/limiter ​ Faulty loudspeaker zones are separated in a non-reactive manner. Any ​errors are recognized,
displayed and recorded within seconds, ensuring all relevant standards are ​met.
5
and delay (up to 9.9 seconds)
• Loudspeaker LOOP support The Comprio control panel contains storage capacity pre-recorded audio messages which can be ​
• EN 54-16 certified used for alarm texts and signals (evacuation alarm/ all clear signals) and caution signals (gongs). ​
• Compliant with EN 60849 and EN 50849 The volume of each source and each amplifier channel can be controlled. Additional filters such as ​ 6
• All functions of an alarm and evacuation system parametric equalizer, high-and low pass filter can be programmed. For special applications such as ​
• Networkable via Ethernet, build in 4 port switch tunnels a delay is available of to 9.9 seconds can be programmed.
• Permanent monitoring of all functions The Comprio control panel can be connected to four independent amplifier channels to operate a ​
• Automatic and dynamic switching of back up amplifier total of eight loudspeaker zones or four loudspeaker rings in VARIODYN D1 loop technology. It is ​ 7
• Automatic volume control (AVC) even also during ​ also possible to mix spur and loop technology.
announcements The Comprio further features 12 contact inputs, of which eight can be programmed with ​supervi-
• Remote monitoring and configuration via network sion, 8 potential-free relay outputs, one audio line out and up to 2 audio line in ports, and / ​or up to
• Two monitored 24 V DC power supply inputs 3 microphone inputs, 3 DAL connections, and one TWI port.
• 12 contact inputs (8 of which can be monitored) This version features an Ethernet connection to other Ethernet capable devices of the VARIODYN ​
• 8 relay outputs D1 family.
• 1 audio output and 2 audio inputs Additional accessories like the handheld microphone, housing, cable, call station etc. must be ​
• 3 DAL port ordered separately.
• 1 TWI port

Technical Data
Transmission range 20 ... 20000 Hz
Load impedance typ. 200 Ω
Harmonic distortion at nominal level < 0.03 %
Ambient temperature -5 °C ... 55 °C
Storage temperature -10 °C ... 60 °C
Air humidity 15 ... 90 %
Weight approx. 5.7 kg
Dimensions W: 483 mm H: 133 mm D: 345 mm (3 HE, 19")
Declaration of Performance DoP-00376130701

Accessories
583708.HO Ventilation panel 1 HU with Honeywell logo
583308 Handheld microphone for VARIODYN D1 Comprio
583441.10 Backup cable RC41 VARIODYN D1
584913 Rack for Comprio
584913.R Rack for Comprio (mounting included)
583414 Cable set 24 V DC-VARIODYN D1 Comprio / 4XD125B or 4XD250B
581732 Battery 12 V / 65 Ah
581340 Periphery clamp for top-hat rail
583466A Patch cable CAT5, 0.5 m gray (periphery)
583467A Patch cable CAT5, 1 m gray (periphery)
583469A Patch cable CAT5, 3 m gray (periphery)
583483 Patch cable CAT5, 3 m blue (DAL)
583451.21 Cable for cabinet rear panel DOM4-8
583477.21 Output cable 2 amplifier DOM
583491 Input cable DOM amplifier, 0.5 m green
583496 End-of-line module (EOL)
581310 Measuring microphone for D1 AVC in a 5” recessed ceiling housing
581316 Microphone, for AVC
583703 Mounting set 1
583332 Overvoltage protection for UIM contacts

11
 VARIODYN D1 VARIODYN D1 Comprio

583945 VARIODYN D1 Comprio 4-24 net (with Ethernet)

1

Part of EN 54-16 approval

Comprio is the central control panel of a VARIODYN D1 system for small and medium sized ​
projects. When combined with the 4XD125B or 4XD250B four channel amplifiers, they provide a ​
complete voice alarm system for projects such as schools and small hotels. The emergency power ​
supply is integrated into the 4XD125B and 4XD250B four channel amplifiers. The system is ​
compliant with voice alarm standards and elector-acoustic emergency warning systems DIN VDE ​
0833-4, EN 60849 and EN 50849.
All amplifiers are permanently monitored and in the case of a fault a backup amplifier can ​auto-
matically replace it. If a 4XD125B or 4XD250B amplifier is used it is possible to use three ​channels
Features to power the speaker zones and use the fourth channel as a backup amplifier. All ​loudspeaker
• One hour audio memory (flash) zones are permanently monitored for short circuit, ground fault, failures and ​impedance deviation.
• 4 channel parametric equalizer, compressor/limiter ​ Faulty loudspeaker zones are separated in a non-reactive manner. Any ​errors are recognized,
and delay (up to 9.9 seconds) displayed and recorded within seconds, ensuring all relevant standards are ​met.
• Loudspeaker LOOP support The Comprio control panel contains storage capacity pre-recorded audio messages which can be ​
• EN 54-16 certified used for alarm texts and signals (evacuation alarm/ all clear signals) and caution signals (gongs). ​
• Compliant with EN 60849 and EN 50849 The volume of each source and each amplifier channel can be controlled. Additional filters such as ​
• All functions of an alarm and evacuation system parametric equalizer, high-and low pass filter can be programmed. For special applications such as ​
• Networkable via Ethernet, build in 4 port switch tunnels a delay is available of to 9.9 seconds can be programmed.
• Permanent monitoring of all functions The Comprio control panel can be connected to four independent amplifier channels to operate a ​
• Automatic and dynamic switching of back up amplifier total of 24 loudspeaker zones or four loudspeaker rings in VARIODYN D1 loop technology. It is ​
• Automatic volume control (AVC) even also during ​ also possible to mix spur and loop technology.
announcements The Comprio further features 12 contact inputs, of which eight can be programmed with ​supervi-
• Remote monitoring and configuration via network sion, 8 potential-free relay outputs, one audio line out and up to 2 audio line in ports, and / ​or up to
• Two monitored 24 V DC power supply inputs 3 microphone inputs, 3 DAL connections, and one TWI port.
• 12 contact inputs (8 of which can be monitored) This version features an Ethernet connection to other Ethernet capable devices of the VARIODYN ​
• 8 relay outputs D1 family.
• 1 audio output and 2 audio inputs Additional accessories like the handheld microphone, housing, cable, call station etc. must be ​
• 3 DAL port ordered separately.
• 1 TWI port

Technical Data
Transmission range 20 ... 20000 Hz
Load impedance typ. 200 Ω
Harmonic distortion at nominal level < 0.03 %
Ambient temperature -5 °C ... 55 °C
Storage temperature -10 °C ... 60 °C
Air humidity 15 ... 90 %
Weight approx. 6.8 kg
Dimensions W: 483 mm H: 133 mm D: 345 mm (3 HE, 19")
Declaration of Performance DoP-00376130701

Accessories
583708.HO Ventilation panel 1 HU with Honeywell logo
583308 Handheld microphone for VARIODYN D1 Comprio
583441.10 Backup cable RC41 VARIODYN D1
584913 Rack for Comprio
584913.R Rack for Comprio (mounting included)
583414 Cable set 24 V DC-VARIODYN D1 Comprio / 4XD125B or 4XD250B
581732 Battery 12 V / 65 Ah
581340 Periphery clamp for top-hat rail
583466A Patch cable CAT5, 0.5 m gray (periphery)
583467A Patch cable CAT5, 1 m gray (periphery)
583469A Patch cable CAT5, 3 m gray (periphery)
583483 Patch cable CAT5, 3 m blue (DAL)
583452.21 Cable for cabinet rear panel DOM4-24
583477.21 Output cable 2 amplifier DOM
583491 Input cable DOM amplifier, 0.5 m green
583496 End-of-line module (EOL)
581310 Measuring microphone for D1 AVC in a 5” recessed ceiling housing
581316 Microphone, for AVC
583703 Mounting set 1
583332 Overvoltage protection for UIM contacts

12 www.hls-austria.com
VARIODYN D1 VARIODYN D1 Comprio

580242 Four-channel amplifier 4XD125B 1

1

Part of EN 54-16 approval

Four-channel power amplifier with built in battery charger for emergency power supply of ​VARI- 2
Features ODYN D1 Comprio. 4XD125B has 4 independent amplifier channels each with 125 W in class ​D
direct drive technology. Due to the fact that all amplifier channels are completely independent ​from
• EN 54-4 and EN 54-16 certified each other, it is possible to use one channel for back up. This could be for the other 3 ​channels or
• Compliant with EN 60849 and EN 50849 alternatively for other amplifier channels of other amplifiers with the same or lower ​output power 3
• Class D technology, efficiency> = 80 % (only 4XDxxxB models). The amplifier may be used with the VARIODYN D1 C ​ omprio, as well as a
• 4 independent amplifier channels DOM. It is also possible to use the amplifier with a separate PSU, in this ​case the internal battery
• One of four amplifier channels can be used as ​ charger must be disabled.
general back up channel 4
• One height unit Technical Data
• Ideal for use with the VARIODYN D1 Comprio Rated voltage 230 V AC
Rated frequency 50 ... 60 Hz (+10 % / -5 %)
• Self-monitoring and self-test by microcontroller Rated current 2.95 A 5
• Protected against overload, short circuit and overhea­ Power output 4 x125W
Emergency power supply 24 V DC
ting Technology Class D
• Smooth and fast step-down in 1dB steps in the event ​ Transmission range 20 ... 22000 Hz
of overdrive or over load Load impedance > 20 kΩ (balanced) 6
Channel separation > 42 dB
• 24 V DC PSU for back up mains power Harmonic distortion at nominal level < 0.3 %
• Integrated battery charger according to EN 54-4 for ​ Ambient temperature -5 °C ... 55 °C
charging batteries up to a capacity of 65 Ah (2 x 12 V ​ Storage temperature -10 °C ... 55 °C
Air humidity 0 ... 93 % 7
/ 65 Ah) for emergency power supply of the amplifier ​ Color gray, similar to RAL 7016
and one Comprio or DOM Weight approx. 9 kg
• Temperature controlled variable speed fans Dimensions W: 483 mm H: 44 mm D: 402 mm 1 HU, 19"
Declaration of Performance DoP-00376130701

The amplifier 4XD125B is not suitable for use with VARIODYN D1 loop technology.

Accessories
583491 Input cable DOM amplifier, 0.5 m, green (two units required)
583477.21 Output cable 2 amplifier DOM
583414 Cable set 24 V DC VARIODYN D1 Comprio / 4XD
583413 Cable set for connecting the batteries to the 4XDxxxB amplifiers

580243 Four-channel amplifier 4XD250B

1

Part of the EN 54-16 approval

Four-channel amplifier with integrated battery recharging system for the emergency power supply ​
to the VARIODYN D1 Comprio. The 4XD250B features 4 independent amplifier channels, each ​
with 250 W, in class D direct drive technology. Due to the fact that all amplifier channels are ​
Features completely independent from each other, it is possible to use one channel for back up. This could ​
• EN 54-4 and EN 54-16 certified be for the other 3 channels or alternatively for other amplifier channels of other amplifiers with the ​
• Compliant with EN 60849 and EN 50849 same or lower output power (only 4XDxxxB and 4XDxxxW models). The amplifier can be used in ​
• Class D technology, efficiency> = 80 % combination with the VARIODYN D1 Comprio as well as with a DOM. It is also possible to use the ​
• 4 independent amplifier channels amplifier also with a separate PSU, the internal PSU must be switched of then. In this case the ​
• One of four amplifier channels can be used as ​ internal battery charger must be disabled.
general back up channel
Technical Data
• Two Height Unit (2 HU) Rated voltage 230 V AC
• Ideal for use with the VARIODYN D1 Comprio Rated frequency 50 ... 60 Hz (+10 % / -5 %)
• Self-monitoring and self-test by microcontroller Power output 4 x 250W
Emergency power supply 24 V DC
• Protected against overload, short circuit and overhea­ Technology Class D
ting Transmission range 20 ... 22000 Hz
• Smooth and fast step-down in 1dB steps in the event ​ Channel separation > 75 dB
Harmonic distortion at nominal level < 0.3 % @ 1 kHz
of overdrive or over load Ambient temperature -5 °C ... 55 °C
• 24 V DC PSU for back up mains power Storage temperature -10 °C ... 55 °C
• Integrated battery charger according to EN 54-4 for ​ Air humidity 0 ... 93 %
Color gray, similar to RAL 7016
charging batteries up to a capacity of 65 Ah (2 x 12 V ​ Weight approx. 12 kg
/ 105 Ah) for emergency power supply of the amplifier ​ Dimensions W: 483 mm H: 90 mm D: 408 mm
Declaration of Performance DoP-00376130701
and one Comprio or DOM
• Temperature controlled variable speed fans
Accessories
583491 Input cable DOM amplifier, 0.5 m, green (two times needed)
583477.21 Output cable 2 amplifier DOM
583414 Cable set 24 V DC VARIODYN D1 Comprio / 4XD
583413 Cable set for connecting the batteries to the 4XDxxxB amplifiers

13
 VARIODYN D1 VARIODYN D1 Comprio

583308 Hand-held microphone for VARIODYN D1 Comprio

1

Part of EN 54-16 approval

Hand-held microphone with announcement key in order to talk directly into the Comprio control ​
unit. The microphone is inserted into the socket directly on the front of the Comprio, and can also ​
be mounted there.
Technical Data
Declaration of Performance DoP-00376130701

581732 Battery 12 V / 65 Ah
1

Emergency battery for usage in emergency power supply of Voice Alarm applications. Required ​
per 2 pieces.
Technical Data
Weight approx. 21.3 kg
Dimensions W: 348 mm H: 178 mm D: 163 mm

581730 Battery for emergency power supply 12 V / 105 Ah

1

Emergency battery for usage in emergency power supply of Voice Alarm applications.
Technical Data
Weight approx. 32.5 kg
Dimensions L: 502 mm W: 111 mm H: 236 mm

Features
• Optimized for using in 19"-cabinets
• Front terminal

14 www.hls-austria.com
VARIODYN D1 VARIODYN D1 Comprio

1
583413 Cable set for connecting batteries to VARIODYN D1 4XDxxxB ​amplifier
1

Standard cable set for internal housing connection of the batteries to the amplifier 4XD125B or ​
4XD250B. 2

583414 Cable set 24 V DC VARIODYN D1 Comprio 4XD

5
1

Standard cable set for connecting Comprios to the amplifier 4XD125B or 4XD250B.

583491A CAT5 patch cable, 0,5 m green (DOM to amplifier)

1

Prefabricated cable from the DOM to the 2-channel power amplifier. If a 4 channel amplifier is ​
used, this cable is needed two times.
Technical Data
Color green

583477.21 Output cable 2 amplifier DOM

1

Prefabricated cabling of power amplifiers, 4 channels (max. 100 V) to the DOM.

583441.10 Backup cable RC 41 VARIODYN D1, 0.5 m

1

Prefabricated cabling of a general average channel on 3 user channels, for the 3:1 average in ​
conjunction with a four-channel amplifier 4XD125B (Part No. 580242) or 4XD250B (Part No. ​
580243). Length 2 m. Short version for Comprio applications.

15
 VARIODYN D1 Loop Technology LIM

Loop Technology LIM

Technology has developed rapidly in the area of electronics in recent years. One of the first systems on the market
This has opened up a host of new possibilities for optimizing existing VARIODYN D1 is one of the first voice alarm systems on the market to
technical solutions and developing new, innovative products. This trend can have this loop wiring system technology. This new technology is based
also be noted in the area of voice alarms. on the proven DOM4-8 which is used for creating up to 4 wire-break
and short-circuit-resistant loops. On each of these 4 loops, up to 64
Spur circuit versus loop wiring system loop isolator modules can be used. Impedance monitoring is used in
In the past, 100 V loudspeaker lines were designed exclusively using spur terms of monitoring technology, which, unlike other solutions, does not
technology. This led to a high risk of failure, because if one spur circuit was require coupling capacitors in the loudspeakers. The loop isolator
interrupted, all the loudspeakers after the wire break would fail. The entire modules monitor the loudspeaker loop in connection with the DOM and
spur circuit would go down in the case of a short circuit. isolate the faulty piece of wire from the loop in the case of a short
circuit. This means that if each loudspeaker is equipped with a loop
Minimizing the risk of failure isolator module, 100 % system reliability is ensured in the case of a
To minimize this risk of failure in the case of a wire break or short circuit, A/B basic line fault.
wiring was used for a long time for based systems on DIN VDE 0833-4
(safety level 2 and 3). The main advantages of this loop technology are
In the case of A/B wiring, half of the loudspeakers in a room are operated on as follows:
different loudspeaker lines. • 100 % system reliability when each loudspeaker is provided with a
This means that in the case of a basic line fault, such as a wire break or loop isolator module
short circuit, half of the loudspeakers in the relevant area will still be in • A/B wiring can be replaced easily
operation. • Only minimum E30 cables needed
If half of the loudspeakers fail and the alarms are therefore operating at half • Considerable cost savings for wiring and installation
power, the sound level is reduced by about 3 dB if the loudspeakers are • Second loudspeaker not necessary in small rooms
arranged correctly.

VARIODYN D1 loop technology is a new technology for optimizing the

reliability of the loudspeaker connection.
With this new type of technology, a wire-break and short-circuit-resistant
loop is constructed, similar to the case of fire detection technology.

BA 2 BA 3
LIM LIM

LIM
BA 1

LIM

LIM

LIM
BA 4 BA 5 BA 6
LIM

LIM LIM

LIM LIM

E 30 cable
Standard cable

16 www.hls-austria.com
VARIODYN D1 Loop Technology LIM

583342 Loop Isolator Module LIM 1

1

Approval: EN 54-17
2
Loop Isolator Module to install a short-circuit and open-circuit tolerant 100 V loudspeaker loop ​
wiring system in VARIODYN D1 loop technology. The modules monitor the current on the ​loudspe-
aker ring and disconnect in case of over-current, e.g. in the case of short-circuit, the ​defective part
3
of the ring from the rest. Loop failures are displayed on DOM and VCM. Each ​module has a total of
three two-pole terminals to connect the loop wiring system and the speakers. ​Wires can be
connected with a section of up to 2.5 mm² to the terminals. Furthermore, a LED of its ​operating
condition is on each module. The Loop Isolator module is housed in a stable, compact IP 6​ 6 4
Features
housing with more of wiring space and is can be use in projects with difficult environmental ​condi-
• Much higher safety compared to spur cabling tion, e.g. industrial use.
• Fully redundant 100 V loop wiring system technology
• Extensive topologies are possible Power amplifier Max. LIM number Max. loop length incl. s​ purs 5
• Short-circuit and wire break tolerant
• EN 54-17 certified 2XD250 40 1000
• Large saving in wiring and installation
6
2XD400 64 1000

4XD250B 25 500 7

4XD300 40 1000

4XD500 50 1000

Please consider that the 4XD125B is not compatible with the loop technology!

17
 VARIODYN D1 Power Amplifier

580231 Power amplifier 2XD250

1

Part of EN 54-16 approval

The power amplifier has two independent amplifier channels, each with 250 Watt and is compatible ​
to VARIODYN D1 system. The power amplifiers are controlled and monitored by VARIODYN D1 ​
Comprio DOM4-8 or DOM4-24.
Features
Technical Data
• Compliant with EN 60849 and EN 50849 Rated voltage 230 V AC
• EN 54-16 certified Rated frequency 50 ... 60 Hz (+10 % / -5 %)
• Class D two channel amplifier Rated current 2.8 A
Power output 2 x 250 W (sin, @ 40 Ω)
• Protected against overload and short- circuits Emergency power supply 24 V DC
• Protected against overheating Technology Class D
• Monitoring by VARIODYN D1 DOM Transmission range 50 ... 22000 Hz
Input level 0 dBu
• 24 V DC emergency power supply input Load impedance > 20 kΩ (symmetrically)
General display element Harmonic distortion at nominal level < 0.3 % @ 1 kHz
• System voltage (green LED) Efficiency > 80 % (at max. level)
Ambient temperature -5 °C ... 55 °C
• CPU status (green LED) Storage temperature -10 °C ... 55 °C
• Combined fault (yellow LED) Air humidity 0 ... 93 %
Color gray, similar to RAL 7016
• 24 V emergency power supply (yellow LED) Weight approx. 16.5 kg
Display element per amplifier channel Dimensions W: 482 mm H: 89 mm D: 402 mm (2 HU, 19")
• Operation (green LED) Declaration of Performance DoP-20997130701
• Amplifier channel status (green LED)
• Amplifier channel error (yellow LED) Accessories
• Clip display (yellow LED) 583491 Cable DOM-XV for amplifier audio input and remote control
583476.21 Cable XV-DOM for amplifier audio output (for 1 amplifier @ one DOM or
Comprio)
583477.21 Cable XV-DOM for amplifier audio output (for 2 amplifier @ one DOM or
Comprio)
583703 Mounting set 1

580232 Power amplifier 2XD400

1

Part of EN 54-16 approval

The power amplifier has two independent amplifier channels, each with 400 Watt and is compatible ​
to VARIODYN D1 system. The power amplifiers are controlled and monitored by VARIODYN D1 ​
Comprio DOM4-8 or DOM4-24.
Features
Technical Data
• Compliant with EN 60849 and EN 50849 Rated voltage 230 V AC
• EN 54-16 certified Rated frequency 50 ... 60 Hz
• Class D two channel amplifier Rated current 4.5 A
Power output 2 x 400 W (sin, @ 25 Ω)
• Protected against overload and short- circuits Emergency power supply 24 V DC
• Protected against overheating Technology Class D
• Cooling by way of controlled ventilation Transmission range 50 ... 22000 Hz
Input level 0 dBu
• Monitoring by VARIODYN D1 DOM Load impedance > 20 kΩ (symmetrically)
• 24 V DC emergency power supply input Harmonic distortion at nominal level < 0.3 % @ 1 kHz
General display element Efficiency > 80 % (at max. level)
Ambient temperature -5 °C ... 55 °C
• System voltage (green LED) Storage temperature -10 °C ... 55 °C
• CPU status (green LED) Air humidity < 93 %
Weight approx. 19 kg
• Combined fault (yellow LED) Dimensions W: 482 mm H: 89 mm D: 402 mm (2 HU, 19")
• 24 V emergency power supply (yellow LED) Declaration of Performance DoP-20997130701
Display element per amplifier channel
• Operation (green LED) Accessories
• Amplifier channel status (green LED) 583491 Cable DOM-XV for amplifier audio input and remote control
• Amplifier channel error (yellow LED) 583476.21 Cable XV-DOM for amplifier audio output (for 1 amplifier @ one DOM or
• Clip display (yellow LED) Comprio)
583477.21 Cable XV-DOM for amplifier audio output (for 2 amplifier @ one DOM or
Comprio)
583703 Mounting set 1

18 www.hls-austria.com
VARIODYN D1 Power Amplifier

580242 Four-channel amplifier 4XD125B 1

1

Part of EN 54-16 approval

Four-channel power amplifier with built in battery charger for emergency power supply of ​ 2
Features VARIODYN D1 Comprio. 4XD125B has 4 independent amplifier channels each with 125 W in class ​
D direct drive technology. Due to the fact that all amplifier channels are completely independent ​
• EN 54-4 and EN 54-16 certified from each other, it is possible to use one channel for back up. This could be for the other 3 ​chan-
• Compliant with EN 60849 and EN 50849 nels or alternatively for other amplifier channels of other amplifiers with the same or lower ​output 3
• Class D technology, efficiency> = 80 % power (only 4XDxxxB models). The amplifier may be used with the VARIODYN D1 C ​ omprio, as
• 4 independent amplifier channels well as a DOM. It is also possible to use the amplifier with a separate PSU, in this ​case the internal
• One of four amplifier channels can be used as ​ battery charger must be disabled.
general back up channel 4
• One height unit Technical Data
• Ideal for use with the VARIODYN D1 Comprio Rated voltage 230 V AC
Rated frequency 50 ... 60 Hz (+10 % / -5 %)
• Self-monitoring and self-test by microcontroller Rated current 2.95 A 5
• Protected against overload, short circuit and overhea­ Power output 4 x125W
Emergency power supply 24 V DC
ting Technology Class D
• Smooth and fast step-down in 1dB steps in the event ​ Transmission range 20 ... 22000 Hz
of overdrive or over load Load impedance > 20 kΩ (balanced) 6
Channel separation > 42 dB
• 24 V DC PSU for back up mains power Harmonic distortion at nominal level < 0.3 %
• Integrated battery charger according to EN 54-4 for ​ Ambient temperature -5 °C ... 55 °C
charging batteries up to a capacity of 65 Ah (2 x 12 V ​ Storage temperature -10 °C ... 55 °C
Air humidity 0 ... 93 % 7
/ 65 Ah) for emergency power supply of the amplifier ​ Color gray, similar to RAL 7016
and one Comprio or DOM Weight approx. 9 kg
• Temperature controlled variable speed fans Dimensions W: 483 mm H: 44 mm D: 402 mm 1 HU, 19"
Declaration of Performance DoP-00376130701

The amplifier 4XD125B is not suitable for use with VARIODYN D1 loop technology.

Accessories
583491 Input cable DOM amplifier, 0.5 m, green (two units required)
583477.21 Output cable 2 amplifier DOM
583414 Cable set 24 V DC VARIODYN D1 Comprio / 4XD
583413 Cable set for connecting the batteries to the 4XDxxxB amplifiers

580243 Four-channel amplifier 4XD250B

1

Part of the EN 54-16 approval

Four-channel amplifier with integrated battery recharging system for the emergency power supply ​
to the VARIODYN D1 Comprio. The 4XD250B features 4 independent amplifier channels, each ​
with 250 W, in class D direct drive technology. Due to the fact that all amplifier channels are ​
Features completely independent from each other, it is possible to use one channel for back up. This could ​
• EN 54-4 and EN 54-16 certified be for the other 3 channels or alternatively for other amplifier channels of other amplifiers with the ​
• Compliant with EN 60849 and EN 50849 same or lower output power (only 4XDxxxB and 4XDxxxW models). The amplifier can be used in ​
• Class D technology, efficiency> = 80 % combination with the VARIODYN D1 Comprio as well as with a DOM. It is also possible to use the ​
• 4 independent amplifier channels amplifier also with a separate PSU, the internal PSU must be switched of then. In this case the ​
• One of four amplifier channels can be used as ​ internal battery charger must be disabled.
general back up channel
Technical Data
• Two Height Unit (2 HU) Rated voltage 230 V AC
• Ideal for use with the VARIODYN D1 Comprio Rated frequency 50 ... 60 Hz (+10 % / -5 %)
• Self-monitoring and self-test by microcontroller Power output 4 x 250W
Emergency power supply 24 V DC
• Protected against overload, short circuit and overhea­ Technology Class D
ting Transmission range 20 ... 22000 Hz
• Smooth and fast step-down in 1dB steps in the event ​ Channel separation > 75 dB
Harmonic distortion at nominal level < 0.3 % @ 1 kHz
of overdrive or over load Ambient temperature -5 °C ... 55 °C
• 24 V DC PSU for back up mains power Storage temperature -10 °C ... 55 °C
• Integrated battery charger according to EN 54-4 for ​ Air humidity 0 ... 93 %
Color gray, similar to RAL 7016
charging batteries up to a capacity of 65 Ah (2 x 12 V ​ Weight approx. 12 kg
/ 105 Ah) for emergency power supply of the amplifier ​ Dimensions W: 483 mm H: 90 mm D: 408 mm
Declaration of Performance DoP-00376130701
and one Comprio or DOM
• Temperature controlled variable speed fans
Accessories
583491 Input cable DOM amplifier, 0.5 m, green (two times needed)
583477.21 Output cable 2 amplifier DOM
583414 Cable set 24 V DC VARIODYN D1 Comprio / 4XD
583413 Cable set for connecting the batteries to the 4XDxxxB amplifiers

19
 VARIODYN D1 Power Amplifier

580248.11 Four-channel amplifier 4XD300

1

Part of the EN 54-16 approval

Power amplifier for the voice alarm system VARIODYN D1 in class D technologies with four ​inde-
pendent power channels and galvanic isolated 100 V direct outputs, symmetric inputs, inrush ​
current limitation and soft start. In comparison to our 4XDxxxB series amplifiers, one amplifier can ​
Features back up another amplifier.
• Built- in electronic protective circuit against thermal ​ Four built-in fans with smooth temperature controlled speed control.
overload, DC signals, sub frequent signals, short ​
Technical Data
circuit, open outputs and HF interference Rated voltage 230 V AC
• Individual status LEDs indicate channel CLIP, ​ Rated frequency 50 ... 60 Hz (+10 % / -5 %)
PROTECT, SIGNAL, POWER, LINE and 24 V DC ​ Power output 4 x 300 W
Emergency power supply 24 V DC
power Back switch contact for sequential remote ​ Technology Class D
power Channel separation > 92 dB
• 2 back fault message contacts Harmonic distortion at nominal level < 0.02 %
Ambient temperature -5 °C ... 55 °C
• Back fault message contact for missing 24 V emer­ Air humidity 40 ... 93 %
gency power supply Color gray, similar to RAL 7016
• 24 V emergency power supply input Weight approx. 13.8 kg
Dimensions W: 484 mm H: 88 mm D: 400 mm (2HU 19")
• Suitable for use with loop technology
Accessories
583491 Input cable DOM-amplifier, 0.5 m green (two units required)
583477.21 Output cable 2 amplifier -DOM

580249.11 Four-channel amplifier 4XD500

1

Part of the EN 54-16 approval

Power amplifier for the voice alarm system VARIODYN D1 in class D technologies with four ​inde-
pendent power channels and galvanic isolated 100 V direct outputs, symmetric inputs, inrush ​
current limitation and soft start. In comparison to our 4XDxxxB series amplifiers, one amplifier can ​
Features back up another amplifier.
• Built- in electronic protective circuit against thermal ​ Four built-in fans with smooth temperature controlled speed control.
overload, DC signals, sub frequent signals, short ​
Technical Data
circuit, open outputs and HF interference Rated voltage 230 V AC
• Individual status LEDs indicate channel CLIP, ​ Rated frequency 50 ... 60 Hz (+10 % / -5 %)
PROTECT, SIGNAL, POWER, LINE and 24 V DC ​ Power output 4 x 500 W
Emergency power supply 24 V DC
power Back switch contact for sequential remote ​ Technology Class D
power Channel separation > 92 dB
• 2 back fault message contacts Harmonic distortion at nominal level < 0.02 %
Ambient temperature -5 °C ... 55 °C
• Back fault message contact for missing 24 V emer­ Color gray, similar to RAL 7016
gency power supply Weight approx. 14 kg
• 24 V emergency power supply input Dimensions W: 484 mm H: 88 mm D: 400 mm (2 HU 19")
• Suitable for use with loop technology
Accessories
583491 Input cable DOM amplifier, 0.5 m, green (two units required)
583477.21 Output cable 2 amplifier DOM

20 www.hls-austria.com
VARIODYN D1 Power Amplifier

580261 Four-channel amplifier 4XV300 1

1

Power amplifier for the voice alarm system VARIODYN D1 in class D technology with four ​indepen-
dent power channels and galvanic isolated 100 V direct outputs, symmetric inputs, inrush ​current
limitation and soft start. 2
Four built-in fans with smooth temperature controlled speed control.
Features Technical Data
• Power amplifier 4-channel, 100 V outputs Rated voltage 230 V AC 3
Rated frequency 50 ... 60 Hz (+10 % / -5 %)
• Efficiency higher than 80 % Power output 4x 300 W
• Control and monitoring by DOM Technology Class D
• Integrated electronic protection against thermal over­ Transmission range 20 ... 20000 Hz
Load impedance > 20 kΩ (symmetrically) 4
load and short-circuit on the output Harmonic distortion at nominal level < 0.03 % @ 1 kHz
Ambient temperature -5 °C ... 55 °C
Storage temperature -10 °C ... 55 °C
Air humidity 0 ... 93 %
Color gray, similar to RAL 7016 5
Weight approx. 12 kg
Dimensions W: 484 mm H: 88 mm D: 400 mm (2 HU 19")

Accessories
583444 Backup cable RC 44
6
583491 Input cable DOM amplifier (2 x required)
583477.21 Output cable 4XV amplifier DOM 583477.21
7

580262 Four-channel amplifier 4XV500

1

As 580261, but with 500 Watt power.

21
 VARIODYN D1 Digital Call Station

Redundant Call Station

583520 Digital Call Station DCS plus

1
Part of the EN 54-16 approval
The digital call station DCS plus allow the selection of loudspeaker circuits, the transmission of ​
voice announcements as well as various gongs and alarms. The digital call station is connectable ​
via a standard CAT5 cable to the VARIODYN D1 control devices DOM and Comprio. All control ​
signals, up to four simultaneous audio signals and the power supply are transmitted. This ​connec-
tion can be done by single or redundant cabling up to 300 m away. It can be increased to ​20 Kilo-
meters by using fiber-optic cabling.
The digital call station DCS plus can be expanded with up to six digital keyboard modules DKM ​
plus, whereby the total number of available keys and LEDs increases to 120 per communication ​
station.
The function of the microphone and the cable connection is permanently monitored. The DCS plus ​
Features provides an additional external audio input and output, which can be used to connect audio ​
• High failure safety due to redundant transmission ​ devices such as CD players. A 3 m long CAT5 cable to connect the digital call station to a wall jack ​
route is included.
• Cost-effective CAT5 cabling Technical Data
• Electret gooseneck microphone with cardioid pattern Nominal level 0 dBu
• Exchangeable gooseneck microphone with protection ​ Transmission range 60 ... 22000 Hz
by using a specific tool to lock/unlock Nominal level 0 dBu
Microphone Electret, uni-directional
• Permanent monitoring of the microphone and cable Swan-neck 400 mm
• Mechanical protection against cable disconnection Loudspeaker 2W
Sample rate 48 kHz
• Build-in loudspeaker for monitoring and for intercom ​ AD/DA converter 24 Bit
operation between other paging stations Current consumption < 70 mA
• Independent additional audio input/output e.g. for ​ Ambient temperature -5 °C ... 55 °C
Air humidity 15 ... 95 %
audio player Color Black, similar to RAL 9005
• 12 freely configurable keys with independent ​ Weight approx. 1.42 kg
programmable LEDs Dimensions W: 200 mm H: 49.4 mm D: 200 mm

The Digital Call Station DCS plus may be embedded in the surface of a table.

A 3 m long CAT5 cable to connect the digital call station to a wall jack is included in delivery.

Accessories
583526 Digital Key Module DKM plus
Redundant Connection to Two DOMs* Single Connection

DAL 1 DAL 2 DAL

DOM 1 DCS plus DOM 2 DOM DCS plus

583526 Digital Key Module DKM plus

1
Part of the EN 54-16 approval
The Digital Key Module DKM plus offer 18 freely configurable keys and 18 LEDs. Up to six Digital ​
Key Module DKM plus can be connected to a Digital Call Station DCS plus. This allows ​communi-
cation stations with up to 120 keys and 120 LEDs.
Technical Data
Ambient temperature -5 °C ... 55 °C
Air humidity 15 ... 95 %
Color Black, similar to RAL 9005
Weight approx. 1.22 kg
Dimensions W: 200 mm H: 49.4 mm D: 200 mm

The Digital Key Module DKM plus may be embedded in the surface of a table.
Features
• Daisy chain cabling from DCS plus to one or more ​
DKM plus
• Mechanical connection to DCS plus and further DKM ​
plus

22 www.hls-austria.com
VARIODYN D1 Digital Call Station

583501.RE Digital Call Station DCS15 redundant 1

1

Part of the EN 54-16 approval

In many installation codes it is necessary to have redundancy in critical signal routes like speaker ​ 2
cables (Loop or AB cabling), between fire panel and the PAVA system. In some installation codes ​
this includes also the connection to the fire men paging microphone. If the connection is lost, there ​
is no way for any live announcement to people which are potentially or actually in high danger. Our ​
paging station supports redundant cable connections to two separate Comprio with Ethernet (not ​ 3
standalone version of Comprio) or DOM. This means it is possible to connect two (CAT5) cables to ​
one paging station providing redundant operation. For redundant operation, two cables (CAT5) ​
connected to one paging microphone are needed. The digital paging microphone DCS15 RE ​ 4
Features serves for the selection of loudspeaker circuits and for setting off speech announcements as well ​
as various gong or alarm sounds. It features 12 freely configurable keys, 13 LED's and a ​
• High failure safety due to redundant transmission ​ gooseneck microphone. The paging microphone is connected with our DAL (Digital Audio Link) ​bus
route to a Comprio or DOM by a standard CAT5 cable. All audio signals and all control signals are ​trans- 5
• Cost-effective CAT5 cabling mitted digitally. The function of the microphone of the digital paging microphone is ​permanently
• Elektret gooseneck microphone with cardioid pattern acoustically monitored. The DCS15 RE also provides an external audio input and ​output which can
• Permanent monitoring of the microphone and cable be used for connecting audio devices such as CD players. Up to four DAL bus ​links can be
• Loudspeaker for monitoring and for intercom opera­ connected to a DOM. Every DCS in the system can simultaneously generate and ​receive different 6
tion between other paging stations (DCS series) voice transmissions and control signals. A digital paging microphone can be offset ​up to 300 m by
• 24-bit AD/DA converter means of a CAT5 cable. Extension to a greater distance is possible with fiber optic ​(FO) cables -
• Independent additional audio input/output e.g. for ​ see respective FO converters which are needed additionally. A redundant connection ​with FO
audioplayer 7
cables can be be achieved. If more keys and/or LEDs are needed, it is possible to add up ​to six
• 12 freely configurable keys with independent ​ digital key modules (DKM18), which allows the increase of the total number of available keys ​and
programmable LED LEDs to 120 per call station.
• A separate LED, programmable in yellow or red
• Can be used redundantly as well as non-redundantly Technical Data
Audio output:
Nominal level 0 dBu
Transmission range 20 ... 22000 Hz
Audioinput:
Nominal level 0 dBu
Common technical data:
Microphone Elektret, cardoid characteristic
Swan-neck 250 mm
Loudspeaker 1W
Sample rate 48 kHz
AD/DA converter 24 Bit
Current consumption < 70 mA
Ambient temperature -5 °C ... 55 °C
Air humidity 15 ... 90 %
Color black, similar to RAL 9005 (side frames)
gray, similar to RAL 7037 (middle body)
Weight approx. 1.6 kg
Dimensions W: 123 mm H: 71 mm D: 180 mm
Declaration of Performance DoP-20997130701

The digital call station may be embedded in the surface of a table, for which a table mounting kit is ​
required. In order to protect from unintentional key press, a transparent key cap is available. Pressing of ​
keys is only possible with open caps. Each cap will protect three horizontal keys.

A 3 m long CAT5 cable for connecting the digital communication unit to a wall jack, is included in delivery.

Accessories
583506 Digital push-button module DKM 18 for redundant call stations
583311 Keyboard protection for call station DCS VARIODYN D1
583507 Installation kit for redundant DCS
583318 Substitute key caps (PU 12 pieces)

Redundant Connection to Two DOMs* Single Connection

DAL 1 DAL 2 DAL

DOM 1 DCS 15 RE DOM 2 DOM DCS 15 RE

23
 VARIODYN D1 Digital Call Station

583502.RE Digital Call Station DCS2 redundant

1

Part of the EN 54-16 approval

As Part No. 583501.RE, however, with only one free configurable key, two LEDs, one microphone ​
and one speaker. An additional audio input/output is not available with this device.
Technical Data
Ambient temperature -5 °C ... 55 °C
Air humidity 15 ... 90 %
Color gray, similar to RAL 7037
Weight approx. 1.6 kg
Dimensions W: 123 mm H: 71 mm D: 180 mm
Declaration of Performance DoP-20997130701
Features
A 3 m long CAT5 cable for connecting the digital communication unit to a wall jack, is included in delivery.
• High failure safety due to redundant transmission ​
route Accessories
• A light emitting diode, programmable in yellow or red 583507 Installation kit for redundant DCS
• Can be used redundantly as well as non-redundantly

583506 Digital Key Module DKM18 for redundant call stations

1

Part of the EN 54-16 approval

Digital key module DKM18 with 18 freely configurable keys and 18 LEDs.
Up to 6 of these DKM18 key modules can be connected to a redundant DCS15 or DCS2. This ​
allows for redundant call stations with up to 120 keys and 120 LEDs. Only suitable for call stations ​
with the .RE suffix. Please note this unit is not suitable for use with the older 58330X.21 call ​
stations. If you need to replace or add a DKM to a 58330x.21 station please contact sales support.
Technical Data
Ambient temperature -5 °C ... 55 °C
Air humidity 15 ... 90 %
Color gray, similar to RAL 7037
Weight approx. 1.6 kg
Dimensions W: 123 mm H: 71 mm D: 180 mm
Declaration of Performance DoP-20997130701

Accessories
583507 Installation kit for redundant DCS

583529 Keyboard cover for DCS plus und DKM plus

Transparent key cap to protect from accidental key presses. So, pressing the keys is only possible ​
with an open cap. With one of these caps, three horizontally arranged keys of a digital call station ​
DCS plus or a digital key module DKM plus can be protected.
This product will be available with Q3/2018.

24 www.hls-austria.com
VARIODYN D1 Digital Call Station

Redundant fire brigade stations 1

583503.RE Digital firefighter microphone DCSF12 redundant

1
2
Part of the EN 54-16 approval
In many installation codes it is necessary to have redundancy in critical signal routes like speaker ​
cables (Loop or AB cabling), between fire panel and the PAVA system. In some installation codes ​ 3
this includes also the connection to the fire men paging microphone. For very good reason, ​
because if the connection to the call station is lost, there is no way for any live announcement to ​
people which are potential or actually in high danger. 4
Our paging station also supports redundant cable connection to two separate Comprio (not ​standa-
196 lone Version of Comprio) or DOM's which means it’s possible to connect two cables (CAT5) ​to one
paging station. The digital paging microphone DCSF12 serves for the selection of ​loudspeaker
circuits and for setting off speech announcements as well as various gong or alarm ​sounds. It 5
features 12 freely configurable keys, 13 LED and a handheld microphone. The paging ​microphone
174
is connected with our DAL (Digital Audio Link) bus to a Comprio or DOM by means of ​a standard
134 CAT5 cable. All audio signals and all control signals are transmitted digitally. The ​function of the
digital paging microphone is permanently acoustically monitored. 6
40
Up to four DAL bus links can be connected to a DOM. Every digital call station in the system can ​
simultaneously generate and receive different voice transmissions and control signals. A digital ​
116
paging microphone can be offset up to 300 m by means of a CAT5 cable. Extension to a greater ​
7
distance is possible with fiber optic (FO) cables - see respective FO converters which are needed ​
Features additionally. Also a connection with FO cables can be done redundant. If more keys and/or LEDs ​
• High failure safety due to redundant transmission ​ are needed, it is possible to add up to six digital key modules (DKM18), which allows the increase ​
route of the total number of available keys and LEDs to 120 per call station.
• Hand-held microphone with built-in loudspeaker and ​ Technical Data
acoustic microphone monitoring Microphone Elektret, cardoid characteristic
• Permanent monitoring of the line to the next interface ​ Loudspeaker 1W
Sample rate 48 kHz
module AD/DA converter 24 Bit
• 24-bit AD/DA converter Current consumption < 150 mA
• 12 freely configurable keys Ambient temperature -5 °C ... 55 °C
Air humidity 15 ... 90 %
• Additional LED programmable in yellow or red Color gray, similar to RAL 7037
• Can be used redundantly as well as non- redundantly Weight approx. 1.6 kg
Dimensions W: 134 mm H: 40 mm D: 196 mm
Declaration of Performance DoP-20997130701

In order to protect from unintentional key press, a transparent key cap is available. Pressing of keys is ​
only possible with open caps. Each cap will protect three horizontal keys.

A 3 m long CAT5 cable for connecting the digital communication unit to a wall jack, is included in delivery.

Accessories
583506 Digital push-button module DKM 18 for redundant call stations
583311 Keyboard protection for call station DCS VARIODYN D1
583316.21 FO conversion for OIM control panel VARIODYN D1
583317.21 FO conversion for digital call stations DCS VARIODYN D1
583315.02 PSU for FO converter DCS O VARIODYN D1
583307 Wall junction box for call station DCS VARIODYN D1
583318 Substitute key caps (PU 12 pieces)
583709 Blind cover for the installation of a DCSF12 or a DCSF1 in the
upright cabinet
584961 Enclosure for one FB call station DCSF
584962 Enclosure for two FB call stations DCSF

Redundant Connection to Two DOMs* Single Connection

DAL 1 DAL 2 DAL

DOM 1 DCSF12 RE DOM 2 DOM DCSF12 RE

25
 VARIODYN D1 Digital Call Station

583504.RE Digital firefighter microphone DCSF1 redundant

1

Part of the EN 54-16 approval

Same as Part No. 583503.RE but with one freely configurable key, two LEDs and a manual ​micro-
phone with a built-in loudspeaker.
Technical Data
Ambient temperature -5 °C ... 55 °C
Air humidity 15 ... 90 %
Color gray, similar to RAL 7037
Weight approx. 1.6 kg
Dimensions W: 134 mm H: 196 mm D: 40 mm
Features Declaration of Performance DoP-20997130701
• High failure safety due to redundant transmission ​
A 3 m long CAT5 cable for connecting the digital communication unit to a wall jack, is included in delivery.
route
• A light emitting diode, programmable in yellow or red
• Can be used redundantly as well as non-redundantly Accessories
583709 Dummy plate
• Hand-held microphone with built-in loud speaker and ​
584961 Enclosure for one FB call station DCSF
acoustic microphone monitoring
584962 Enclosure for two FB call station DCSF
• Permanent monitoring of the line to the next interface ​
module
Redundant Connection to Two DOMs* Single Connection
• 24-bit AD/DA converter

DAL 1 DAL 2 DAL

DOM 1 DCSF12 RE DOM 2 DOM DCSF12 RE

583505.RE Fire Brigade Call Station DCSF7

1

Part of EN 54-16 approval

The Digital Fire Brigade Call Station DCSF7 serves to dial and start pre-configured alarm text ​
messages and to broadcast voice announcements by the fire brigade.
This call station is designed for the use in Austria. The buttons are labeled in German language, ​
but can easily be replaced in local language
The Digital Fire Brigade Call Station DCSF7 is used along with ENS VARIODYN D1 and contains a​
hand-held microphone with talk button, operation/display elements and an inbuilt loudspeaker for ​
acoustic microphone monitoring and the acoustic error message to be broadcast.
All other features, including the redundant cabling are as per the DCS and DSCF call stations.
Features Technical Data
• Five freely-programmable buttons for alarms Operating voltage 24 V DC
Microphone Manual microphone, cardoid characteristic,
• One freely configurable button for the all-clear signal Push-To-Talk (PTT) button
• One button for resetting/acoustics Loudspeaker 1W
• Three integrated LED (Operation, Fault, Occupied) Sample rate 48 kHz
AD/DA converter 24 Bit
• Hand-held microphone with cardioid characteristics ​ Current consumption < 150 mA
and PTT talk button Ambient temperature -5 °C ... 55 °C
• Optional fiber optic connection for distances of up to ​ Air humidity 15 ... 90 %
Color red, similar to RAL 3000 (housing)
2000 m white, similar to RAL 9002 (key pad)
• EN 54-16 certified Weight approx. 2 kg
Dimensions W: 200 mm H: 300 mm D: 55 mm
Declaration of Performance DoP-20997130701

Accessories
583316.21 LWL-Converter-Central
583317.21 LWL-Converter-communication unit
583318 Replacement-Key caps (VPE 12 pieces)

Redundant Connection to Two DOMs* Single Connection

DAL 1 DAL 2 DAL

DOM 1 DCSF7 DOM 2 DOM DCSF7

26 www.hls-austria.com
 VARIODYN D1 Digital Call Station

Accessories for paging microphones 1

584961 Enclosure for a firefighter paging microphone DCSF

1
2
Wall enclosure manufactured out of sheet steel for the inclusion a firefighter paging microphone ​
DCSF12 (Part No. 583503.RE) or DCSF (Part No. 583504.RE) in the original enclosure. ​Additio-
nally you should to order an installation kit (Part No. 583507 for each DCS/DKM). 3
Technical Data
Type of protection IP 30
Color red, similar to RAL 3000
Weight approx. 4.8 kg 4
Dimensions W: 350 mm H: 265 mm D: 100 mm

Housing including a pack with 4 screws for the installation of the call station.
This call station is not included in the scope of the delivered package.
Features 5
Accessories
• Powder coated in red, similar RAL 3000 584963 Profile half-cylinder with standard closure
• Door with a viewing window 180 x 120 mm with ​
acrylic glass cover 6
• Internal mounting plate for installation of the DCS
• 3 cable entries on rear wall of housing
• 2 cable entries on the upper and lower housing - and ​
–bottom side respectively 7
• A cable entry on the right and left of the housing
• A mounting bracket for fiber optic converter Part No. ​
583317.21 in the housing

584962 Enclosure for one firefighter paging microphone and one DKM
1

Wall enclosures made of sheet steel for holding one firefighter paging microphone DCSF12 (Part ​
No. 583503.RE) or DCSF (Part No. 583504.RE) and one DKM18 (Part No. 583306.21) in the ​
original enclosure. Additionally you should order an installation kit (Part No. 583507) for each DCS/​
DKM.
Technical Data
Type of protection IP 30
Color red, similar to RAL 3000
Weight approx. 8.4 kg
Dimensions W: 350 mm H: 500 mm D: 100 mm

Housing including accessory kit with 8 screws for assembly of the callstations.
Features This call station is not included in the scope of the delivered package.
• Powder coated in red, similar RAL 3000
Accessories
• Door with 2 viewing windows 180 x 120 mm with ​ 584963 Profile half-cylinder with standard closure
acrylic glass cover
• Prepared to include fire closure
• Internal mounting plate for installation of the DCS/​
DKM
• 6 Cable entries on rear wall of housing
• 2 Cable entries on the upper and lower housing - and ​
–bottom side respectively
• 2 Cable entries right and left of housing respectively
• 2 Mounting brackets for LWL-Converter type. Part No. ​
583317.21 in housing

584963 Profile half-cylinder with standard closure

1

Profile half-cylinder with standard locking for mounting in fire brigade call station housing Part No. ​
584961 or 584962.
Fastening screw and 2 keys are included in the delivery.

27
 VARIODYN D1 Digital Call Station

Accessories for Call Stations

583316.21 LWL converter multi mode

1

Part of EN 54-16 approval

Module required for connection of digital communication units DCS or universal interface module ​
UIM to VARIODYN D1 via multimode optical fiber. If the system is in use for VA purposes, it is ​
necessary to provide power either from 24 V DC source or from a battery (Part No. 805683).
Technical Data
Wavelength 1308 nm
Range < 2 km
FO-Connector Duplex SC
Dimensions W: 115 mm H: 55 mm D: 25 mm

Accessories
583315.02 Power supply for LWL converter
805683 External power supply DCU 2403

Patch cable
Patch cable max. 10 m
max. 10 m Fiber optic max. 2 km

Part No. 583317.21 Part No. 583316.21

Part No. 805683

583316.SM LWL converter single mode

1

Part of EN 54-16 approval

Module required for connection of digital communication units DCS or universal interface module ​
UIM to VARIODYN D1 via multimode optical fiber. If the system is in use for VA purposes, it is ​
necessary to provide power either from 24 V DC source or from a battery (Part No. 805683).
Technical Data
Range < 20 km

Accessories
583315.02 Power supply for LWL converter
805683 External power supply DCU 2403

Patch cable
Patch cable max. 10 m
max. 10 m Fiber optic max. 20 km

Part No. 583317.SM Part No. 583316.SM

Part No. 805683

28 www.hls-austria.com
VARIODYN D1 Digital Call Station

583317.21 LWL converter for DCS multi mode 1

1

Part of EN 54-16 approval

Module required for connection of digital communication units DCS or universal interface module ​ 2
UIM to VARIODYN D1 via multimode optical fiber. If the system is in use for VA purposes, it is ​
necessary to provide power either from 24V DC source or from a battery (Part No. 805683).
Technical Data 3
Operating voltage 24 V DC
Current consumption @ 24 V DC approx. 500 mA
Wavelength 1308 nm
Range < 2 km
FO-Connector Duplex SC 4
Dimensions W: 115 mm H: 55 mm D: 25 mm

Accessories
583315.02 PSU for FO converter 5
805683 External PSU DCU 2403

6
Patch cable
Patch cable max. 10 m
max. 10 m Fiber optic max. 2 km
7
Part No. 583317.21 Part No. 583316.21

Part No. 805683

583317.SM LWL converter for DCS single mode

1

Part of the EN 54-16 certification

Module required for connection of digital communication units DCS or universal interface module ​
UIM to VARIODYN D1 via multimode optical fiber. If the system is in use for VA purposes, it is ​
necessary to provide power either from 24V DC source or from a battery (Part No. 805683).
Technical Data
Range < 20 km

Accessories
583315.02 PSU for FO converter
805683 External PSU DCU 2403

Patch cable
Patch cable max. 10 m
max. 10 m Fiber optic max. 20 km

Part No. 583317.SM Part No. 583316.SM

Part No. 805683

583315.02 Power supply for LWL converter

1

Power supply for fiber optic converter Part No. 583317.21. For non-security applications.

29
 VARIODYN D1 Digital Call Station

583307 Wall-surface mount terminal box for DCS

1

Wall jack to connection of a communication unit of the series DCS or DCSF.

583300.HO Adhesive label for DCS "Esser by Honeywell"

1

Label for the stations of the DCS series and DCSF with the inscription "ESSER by Honeywell."
10 pieces

583311 Keyboard cover for DCS VARIODYN D1 call station

1

Transparent key cap to protect from accidental key presses. So, pressing the keys is only made ​
possible with an open cap. With one of these caps, three horizontally arranged keys of a digital call ​
station or a digital key module can be protected.

583507 Installation kit for redundant DCS

1

Installation kit for DCS15RE, DCS2RE, or DKM18. This installation kit is needed to install a paging ​
microphone in a table surface or the 19" panel (Part No. 583709).
Technical Data
Dimensions W: 134 mm H: 40 mm D: 196 mm

Can be used for RE versions!

Accessories
583709 Blind cover 4 HU
196

174

134

40

116

583318 Key cap

1

Replacement key caps for telephone stations of the DCS, DCFS and DKM series.
12 pieces

30 www.hls-austria.com
VARIODYN D1 Digital Call Station

Call stations for non-safety related applications 1

The DIGISystem M is a universal call station system for loudspeakers. Up to 40 call stations can ​
be connected parallel, though only one NF-input and up to 5 digital inputs are used on a UIM. ​
2
Processor-controlled different functions for the keys are possible. No speacial receiver is required ​
in the VARIODYN system, only one UIM. The NF-output should be connected on a UIM-line input ​
and the switching outputs to UIM-contact inputs. The control line 9 (PPT contact) is equipped to ​
trigger this function with a minimum lag of time to prevent mechanical noise while pressing the ​ 3
keys.
The telephone stations are suitable for the use in departmental stores, courts, furniture stores, ​
home improvement store etc.
4
The call stations are NOT for safety-related announcements, for e.g. for alerts and evacuation ​
messages.

1 2 3 4 Max. 40 5

UIM
Digital Audio Link DOM
7

586102 Desktop microphone with pre chime DIGIM1

1

Desktop call station built-in pre chime DIGI M1. 1 writable button with LED indicator for keyboard ​
control and busy /operating-/chime display. Processor control with programming via diodes. ​Integ-
rated limiter and special circuit to eliminate thumps. Built-in + 6 dB NF-amplifier with volume ​
control. Concise short chime with controls for volume and pitch. Parallel connection of up to 40 call ​
stations on line JY(ST)Y6 (4) x 2 x 0.8 (0.6). 3 m connecting cable with D-Sub-plug 9-pin. Cardioid ​
swan-neck in electret condenser technology.
Technical Data
Operating voltage 24 V DC
Current consumption @ 24 V DC approx. 24 mA
Housing ABS light gray
Dimensions L: 250 mm W: 125 mm H: 30 mm D: 150 mm

586103 Desktop call station with pre chime DIGIM4

1

Desktop call station with chime-system DIGI M4 placed in housing. 4 writable buttons with LED ​
indicator for keyboard control and busy /operating-/chime display. Processor control with ​program-
ming via diodes. Integrated limiter and special circuit to eliminate thumps. Built-in +6 dB ​NF-ampli-
fier with volume control. Concise short chime with controls for volume and pitch.
Parallel connection of up to 40 call stations on line JY(ST)Y6(4)x2x0.8(0.6). 3 m connecting cable ​
with D-Sub-plug 9-pin. Cardioid swan-neck in electret condenser technology.
Technical Data
Operating voltage 24 V DC
Current consumption @ 24 V DC approx. 30 mA
Housing ABS light gray
Dimensions L: 250 mm W: 125 mm H: 30 mm D: 150 mm

586104 UP-box for DIGISystem desktop paging microphon DIGIST09

1

Flush mount box for DIGISystem desktop call stations with a lockable 9-pin Sub-D socket ​
connector including an EMI/RFI filter. Quick coupling with spring clips. The outlet may be ​confi-
gured either vertically or at a 30° tilt. Pure white and complete with GIRA system 55-fitting ​unif-
rame. Intended for use with surface mount housing (Part No. 581329).

31
 VARIODYN D1 Digital Call Station

583560 PC Touch Screen Call Station

An elegant touch screen solution, designed for use in front of house environments or complex ​buil-
dings. Combined with the PAMMI plus software the user has an intuitive tool for creating ​announ-
cements with graphical display of the site and zones.The sleek yet durable call station ​delivers a
15-inch touchscreen, Intel Celeron dual-core processor, 2 GB RAM and
320 GB storage.
Designed to fit on top of an office desk, reception desk, information desk or gate desk.

With no moving parts to wear out, touch response is fast, accurate, and drift free using a finger or ​
soft stylus. Pure glass construction allows high light transmission, ensuring good visibility in bright ​
light environments, without compromising durability or functionality.

Features The first class gooseneck microphone with cardioid characteristics is perfect for noisy ​environ-
ments. With the high grade cable it is possible to place the microphone remotely from the ​call
• Zero-bezel model provides a seamless, edge-to-edge ​
station hardware, allowing for the user to create a comfortable working environment.
design for a sleek appearance that is easy to clean ​
and provides maximum display space
Technical Data
• Pure glass touchscreen for optimal picture quality is ​ Ambient temperature 0 °C ... 35 °C
factory sealed to resist spills, dust and grease Air humidity 20 ... 80 %
• Durable to withstand the rigors of use in a public envi­ Weight approx. 7.3 kg
ronment
• Dynamic gooseneck microphone with on/off switch Intel Celeron Processor, Intel HD Graphics, 2 GB RAM, Windows POS Ready OS, 1 x line out, 2 x line ​
in, 1 x Gigabit LAN
• Sennheiser CL2- line cable between Call Station and ​
Microphone

583565 Dynamic Microphone with Gooseneck

Suitable for control desks, table- or wallmounting. Microphone capsule protected against structure-​
born sound.
1

Technical Data
Ambient temperature -30 °C ... 60 °C
Air humidity < 93 %
Housing Metal / Plastic
Weight approx. 400 g
Dimensions W: 150 mm H: 300 mm D: 150 mm

32 www.hls-austria.com
VARIODYN D1 Mains Switching Unit

583371.21 Mains Switching Unit MSU 1

1

Part of EN 54-16 approval

The power panel MSU is used to secure the power supply of all VARIODYN D1 components that ​ 2
Features are installed in a cabinet. In addition, it offers a connector for connecting a service PC for local / ​
network-wide maintenance purposes.
• Approved as per EN 54-16
• Three 18 A overload switch with control contacts and ​ Each of up to three phases that will be charged max. 18 A. The overload switch automatically ​ 3
indicator light releases the current, but can also be used for manual switching of the power supply.
• For maintenance purposes IEC and Ethernet port for ​
connecting a service PC The operating state is indicated by green indicator lights. The switch position can be evaluated via ​
• The three terminals for auxiliary change-over per ​ 4
auxiliary contacts. A front-mounted 230 V mains connector and an RJ45 jack are provided for ​
overload switch connecting a service PC.
• Up to four devices can be connected per overload ​
switch Technical Data
Thermal Protection: 5
• Plastic cover of the keys
Rated current 18 A
Operating life 10.000 cycles
Shutdown 1-pole
Auxiliary Contacts:
Type Changeover contact 6
Contact load AC 250 V, max. 4 A
Contact load DC 24 V, max 4 A
Common technical data:
Ambient temperature -5 °C ... 55 °C
Air humidity 15 ... 90 % 7
Weight approx. 4.2 kg
Dimensions W: 483 mm H: 44 mm D: 345 mm (1 HU, 19")
Declaration of Performance DoP-20997130701

This unit does not protect against neutral conductor interruption. If this is not done on customer side, you ​
need to include accessory Part No. 584970 and 584971. An electrical professional is needed to connect ​
this item to mains power.

Accessories
583703 Mounting set 1
3 x 18 A
MAINS

max. 250V / 4A
max.

AUX L1 AUX L2 AUX L3

CONTACTS

L1 L2 L3 N PE F1/L1 F1/N F1/PE F2/L2 F2/N F2/PE F3/L3 F3/N F3/PE ETHERNET

Ethernet
Phase 1 18 A Phase 2 18 A Phase 3 18 A connection to the DOM

ETHERNET POWER / F1 F1 F2 F3
MSU VARIODYN D1
1

1
0

Ethernet
programming port
230 V-primary low receptacle,
for example, service PC power supply

MSU rear view and front view

33
 VARIODYN D1 System Communication Unit

583381.31 System Communication Unit SCU

1

Part of EN 54-16 approval

The System Communications Unit serves as a digital audio memory for the VARIODYN D1 ​
Features system. It is possible to record and playback multiple audio data streams simultaneously.
• EN 54-16 certified
The connection to the other VARIODYN D1 modules is made via the Ethernet, and is permanently ​
• Digital audio memory for VARIODYN D1
monitored.
• Networkable via Ethernet
• Can be used for the logging and recording of announ­
The audio storage for critical evacuation alerts and notifications is done in accordance with IEC EN ​
cements
60849 in a non-volatile flash memory. Depending on the format, storage capacity is approx. two ​
• Automatic buffer and repetition of interrupted announ­
hours.
cements
• 24 V DC emergency power supply
Additional prerecorded audio messages such as announcements, signals, or commercial texts are ​
stored on a hard disk. Depending on the format, storage capacity here is approx. 1000 hours.

The SCU can also be used for the logging and recording of announcements. These are also stored ​
in the memory, and logged with date, time, and activation details. The automatic buffer makes it ​
possible to transmit announcements that cannot be played to all targets as soon as these targets ​
become available.

Connections
• Ethernet connection 100 Mbit/s
• Network connection
• 24 V DC emergency input

Displays
• POWER-LED, HARDDISK-LED
• ERROR-LED, STAND-ALONE-LED

Note:
Not for safety-related voice messages, these must be stored in the DOM.
Technical Data
Emergency power supply:
Rated voltage 24 V DC
Power consumption 24 W
Common technical data:
Rated voltage 90 ... 265 V AC
Rated frequency 47 ... 63 Hz
Flash memory approx. 2 h
Hard drive capacity approx. 1000 h
Ambient temperature -5 °C ... 45 °C
Air humidity 15 ... 90 %
Color gray, similar to RAL 7016
Weight approx. 3 kg
Dimensions W: 483 mm H: 44 mm D: 360 mm (1 HU, 19")
Declaration of Performance DoP-20997130701

Accessories
583486 Patch cable CAT5, 1 m yellow (ETH)
583487 Patch cable CAT5, 2 m yellow (ETH)
583488 Patch cable CAT5, 3 m yellow (ETH)
583703 Mounting set 1

34 www.hls-austria.com
VARIODYN D1 Universal Interface Module

583331.21 Universal Interface Module UIM 1

1

Part of EN 54-16 approval

The universal interface module serves as the interface module of the VARIODYN D1 public ​ 2
Features address system for connecting two analog audio inputs, two analog audio outputs, as well as 48 ​
control contacts. For eight control contacts, short-circuit and interruption monitoring can be ​acti-
• EN 54-16 certified vated.
• Two analog audio inputs/outputs 3
• 48 contacts freely programmable as inputs and ​ The UIM is connected to the VARIODYN D1 module DOM via the DAL bus.
outputs
• Digital Audio link (DAL) to DOM It digitizes two analog audio inputs, i.e. from a CD player or a hazard detection system, and ​trans- 4
mits the digitized audio data to the VARIODYN D1 module DOM via the DAL bus. In order to ​
transmit all played messages to an external device, for instance, two outputs are available as ​
analog audio sources. The 48 contacts can serve as contact inputs or as contact inputs. This ​
allows for an external control of the VARIODYN D1 system, and information about the status of the ​ 5
system is made available.
Technical Data
Audio output:
Nominal level 0 dBu 6
Transmission range 20 ... 22000 Hz
Harmonic distortion at nominal level < 0.05 %
Output impedance 200 Ω / 200 Ω (XLR / Cinch, potential free)
Audioinput:
Nominal level 0 dBu 7
Transmission range 20 ... 22000 Hz
Harmonic distortion at nominal level < 0.05 %
Load impedance 100 kΩ / 1 kΩ (XLR / Cinch, potentialfrei)
Common technical data:
Current consumption @ 24 V DC < 150 mA
Inputs max. 36 V DC
Outputs 36 V DC/50 mA
Ambient temperature -5 °C ... 55 °C
Air humidity 15 ... 90 %
Weight approx. 3.6 kg
Dimensions W: 483 mm H: 44 mm D: 345 mm (1 HE, 19")
Declaration of Performance DoP-20997130701

Accessories
583401.21 Signal cable12 for UIM
583481 Patch cable CAT5, 1 m blue (DAL)
583482 Patch cable CAT5, 2 m blue (DAL)
583483 Patch cable CAT5, 3 m blue (DAL)
583703 Mounting set 1
583332 Overvoltage protection module for UIM-contacts

48 control contacts 2 x audio OUT 2 x audio IN DAL bus

VARIODYN D1
UIM

Signal ERROR POWER

UIM rear view and front view

583332 Overvoltage protection for UIM contacts

1

Part of EN 54-16 approval

The UIM has 48 contact inputs or outputs. These inputs and outputs are divided into 4 blocks, e​ ach
with 12 pieces.
In EN 54-16 compliant systems, to connect cables, which head to the external contacts and are ​
longer than 3 m, the crowbar circuit protection module should be used. With Crowbar circuit ​
module, in each case, 12 inputs and outputs (1 Block) are fused. It is then used instead of the ​
signal cable 12 (Part No. 583401.21) A connection cable is included in shipping.
Technical Data
Declaration of Performance DoP-20997130701

35
 VARIODYN D1 Universal Interface Module

583351 View Control Module VCM

1

Part of EN 54-16 approval

The VCM was added to the VARIODYN D1 system in accordance with the requirements for EN 54-​
16 approval. It enables the standardized display of collective messages and has a 5-button ​
operator control panel. At least one VCM is required for EN 54-16 systems. If several upright ​cabi-
nets are set up directly side-by-side in a room and form a single system, one VCM per room is ​
sufficient. Remotely positioned cabinets require a separate VCM each. The VCM is connected ​
directly to a UIM and 24 V DC. The max. 3 DOMs in the cabinet in which the VCM is located are ​
also connected to three separate VCM inputs. All other DOMs are linked via Ethernet. The VCM ​
can be programmed easily and conveniently using a macro in the “Designer” programming ​soft-
ware.
Technical Data
Current consumption @ 24 V DC approx. 10 mA
Declaration of Performance DoP-20997130701

36 www.hls-austria.com
VARIODYN D1 Additional Components / Audio Devices

583341.21 Contact Interface Module CIM 1

1

Part of EN 54-16 approval

The CIM is used as an interface of VARIODYN D1 system for the connection of 8 control contacts. ​ 2
The 8 control contacts can be configured as either an input or an output. Four of the eight contacts ​
can be programmed in the input function with monitoring of connection line. A 3 m long Cat 5 cable ​
is included to connect from CIM to the TWI input of DOM.
3
Technical Data
Inputs max. 36 V
Outputs 36 V DC / 50 mA
Ambient temperature -5 °C ... 55 °C
Air humidity 15 ... 90 % (non condensing) 4
Features Weight approx. 310 g
Dimensions W: 105 mm H: 40 mm D: 105 mm
• EN 54-16 certified Declaration of Performance DoP-20997130701
• Contacts as inputs or outputs freely programmable /4 ​ 5
of which can be monitored Control contacts are listed as open-collector.
• CAT5 cabling to DOM
• Mounting by mounting to the DIN-track possible
• Connection of different trades possible via CIM 6

7
X-MAP04 DVD/CD/MP3/FM/AM audio player
1

The X-MAP04 audio device features an integrated DVD/CD player, an MP3 player and an FM/AM ​
tuner, as well as an USB/SD interface. The device supports two modes of operation. Mode of ​
operation 1: DVD/USB/SD and FM/AM tuner can be operated simultaneously via two separate ​
Features ports. Mode of operation 2: DVD/USB/SD and FM/AM tuner can be switched. The selected signal ​
• Two independent audio outputs for DVD / USB / SD ​ is transmitted via a joint port. DVD videos and JPEG are supported. The connection to the ​VARI-
and FM / AM Tuner ODYN D1 system is done via a cinch audio link. Suitable for 24-hour operation.
• Two independent volumes can be set Technical Data
• A combined audio output DVD\CD\Audio:
Output voltage 2 V DC ± 0,2 V
Harmonic distortion at nominal level < 0.05 %
Signal-to-noise ratio > 80 dB
Channel separation > 75 dB
Tuner:
Frequency band AM 531 ... 1710 kHz
Frequency band FM 87,5 ... 108 MHz
Common technical data:
Rated voltage 230 V AC
Power consumption 13 W
Inputs FM 75 Ω, USB-Port, SD-Port
Outputs 1 x Cinch for FM/AM-Tuner, 1 x Cinch for DVD/USB/SD, 1 x ​
Cinch for mixed signals
Weight approx. 3.8 kg
Dimensions W: 482 mm H: 44 mm D: 252 mm (1 HU)

37
 VARIODYN D1 Power Supply

Emergency power supply

The emergency power supply is certified according to the standard EN 54-4 (A2), which is ​
mandatory since August 2009 for emergency power supply of voice alarm systems. Which battery ​
capacity and the number of devices required to operate the voice alarm system, depends on the ​
required buffer time, power, the alarm time etc. To ensure the optimum designing of emergency ​
power supply, simply and efficiently, a calculation tool for VARIODYN D1 emergency power supply ​
is available for you in our service area of our website as a file to download.
All batteries must be ordered in pairs!

581722 Emergency power supply PSU 24 V-2

1

Part of the EN 54-16 approval

Emergency manager for use as emergency power supply of an Voice Alarm – application.
Features Technical Data
• Emergency power supply in the 1 HU enclosure Rated voltage 230 V AC
Rated frequency 50 ... 60 Hz
• Outputs for control devices such as DOM or Comprio ​ Output current max. 186 A (battery)
net Battery capacity max. 320 Ah
• 8 individually fused high power outputs for output ​ Emergency power supply 24 V DC
Ambient temperature -5 °C ... 40 °C
amplifiers, each with 30A max. Storage temperature -40 °C ... 85 °C
• Authorisation pursuant to EN 54-4(A2) Weight approx. 5.2 kg
• LED displays and display for status reports Dimensions W: 483 mm H: 45 mm D: 328 mm
• Potential-free contacts for the transmission of alarm ​
2 batteries of the same kind are required for each emergency power supply.
messages
• Battery capacity up to a total of 320 Ah
• Maximum output 186 A Accessories
581730 Battery for emergency power supply 12 V / 105 Ah
581731 Battery for emergency power supply 12 V / 150 Ah

581723 Emergency power supply PSU 24 V-4

1

Part of the EN 54-16 approval

Emergency manager for use as emergency power supply of an Voice Alarm – application.
Technical Data
Features Rated voltage 230 V AC
Rated frequency 50 ... 60 Hz
• Emergency power supply in the 2 HU enclosure Output current max. 372 A (battery)
Battery capacity max. 640 Ah
• Outputs for control devices such as DOM or Comprio ​ Emergency power supply 24 V DC
net Ambient temperature -5 °C ... 40 °C
• 1 individually fused high power outputs for output ​ Storage temperature -40 °C ... 85 °C
Weight approx. 8.8 kg
amplifiers (12 outputs in total but one output cannot ​ Dimensions W: 483 mm H: 89 mm D: 328 mm
be used)
• Authorisation pursuant to EN 54-4(A2) Up to 2 x 2 batteries of the same kind are required for each emergency power supply.
• LED displays and display for status reports
• Potential-free contacts for the transmission of alarm ​ Accessories
messages 581730 Battery for emergency power supply 12 V / 105 Ah
• Battery capacity up to a total of 640 Ah 581731 Battery for emergency power supply 12 V / 150 Ah
• Maximum output current in case of emergency power ​
situation 372 A

38 www.hls-austria.com
VARIODYN D1 Power Supply

581724 Emergency power supply PSU 24 V-2 net 1

1

Part of the EN 54-16 approval

Emergency manager for use as emergency power supply of an Voice Alarm – application. This ​ 2
Features version offers in addition to the features of Part No. 581722 an Ethernet interface for reading ​
service information over USB via Ethernet.
• Emergency power supply in the 1 HU enclosure
• Outputs for control devices such as DOM or Comprio ​ Technical Data 3
net Rated voltage 230 V AC
Rated frequency 50 ... 60 Hz
• 6 individually fused high power outputs for output ​ Output current max. 186 A (battery)
amplifiers Battery capacity max. 320 Ah
• Authorization pursuant to EN 54-4(A2) Emergency power supply 24 V DC 4
Ambient temperature -5 °C ... 40 °C
• LED displays and display for status reports Storage temperature -40 °C ... 85 °C
• Potential-free contacts for the transmission of alarm ​ Weight approx. 5.2 kg
messages Dimensions W: 483 mm H: 45 mm D: 328 mm
• Battery capacity up to a total of 320 Ah
5
2 batteries of the same kind are required for each emergency power supply.
• Maximum output current in case of emergency power ​
situation 186 A
Delivery time on request.
• Ethernet interface for reading service information 6
Accessories
581730 Battery for emergency power supply 12 V / 105 Ah
581731 Battery for emergency power supply 12 V / 150 Ah 7
581725 Emergency power supply PSU 24 V-4 net
1

Part of the EN 54-16 approval

Emergency manager for use as emergency power supply of an Voice Alarm – application. This ​
version offers in addition to the features of Part No. 581722 an Ethernet interface for reading ​
service information over USB via Ethernet.
Features
Technical Data
• Emergency power supply in the 2 HU enclosure Rated voltage 230 V AC
• Outputs for control devices such as DOM or Comprio ​ Rated frequency 50 ... 60 Hz
net Output current max. 372 A (aus Akku)
Battery capacity max. 640 Ah
• 1 individually fused high power outputs for output ​ Emergency power supply 24 V DC
amplifiers (12 outputs in total but one output cannot ​ Ambient temperature -5 °C ... 40 °C
be used) Storage temperature -40 °C ... 85 °C
Weight approx. 8.8 kg
• Authorization pursuant to EN 54-4(A2) Dimensions W: 483 mm H: 89 mm D: 328 mm
• LED displays and display for status reports
• Potential-free contacts for the transmission of alarm ​ Up to 2 x 2 batteries of the same kind are required for each emergency power supply.
messages
• Battery capacity up to a total of 640 Ah Delivery time on request.
• Maximum output current in case of emergency power ​
situation 372 A Accessories
• Ethernet interface for reading service information 581730 Battery for emergency power supply 12 V / 105 Ah
581731 Battery for emergency power supply 12 V / 150 Ah

581721 Emergency power supply 24 V / 150 A

1

Part of EN 54-16 approval

Emergency manager for use as emergency power supply of an Voice Alarm – application.
Technical Data
Rated voltage 230 V AC
Features Rated frequency 50 ... 60 Hz
• Emergency power supply in 1 HU housing Output voltage 24 V DC
Output current max.150 A
• 3 individually fused outputs for control devices (DOM) Ambient temperature -5 °C ... 45 °C (at 100 % load)
• 6 individually fused high power outputs for power ​ Storage temperature -25 °C ... 85 °C
Air humidity 0 ... 95 %
amplifiers Weight approx. 6 kg
• Approval according to EN 54-4 (A2) Dimensions W: 483 mm H: 88 mm D: 395 mm (2 HU, 19")
• LED indicators for power, battery, consumer
• Potential free contacts for forwarding of error ​ 2 batteries of the same kind are required for each emergency power supply.
messages
• Battery capacity up to 225 Ah Delivery time on request.
• Maximum output 150 A
Accessories
581730 Battery for emergency power supply 12 V / 105 Ah
581731 Battery for emergency power supply 12 V / 150 Ah

39
 VARIODYN D1 Power Supply

581730 Battery for emergency power supply 12 V / 105 Ah

1

Emergency battery for usage in emergency power supply of Voice Alarm applications.
Technical Data
Weight approx. 32.5 kg
Dimensions L: 502 mm W: 111 mm H: 236 mm

Features
• Optimized for using in 19"-cabinets
• Front terminal

581731 Battery for emergency power supply 12 V/150 Ah

1

Emergency battery for usage in emergency power supply of Voice Alarm applications.
Technical Data
Weight approx. 49.5 kg
Dimensions L: 552 mm W: 110 mm H: 288 mm

Features
• Optimized for using in 19"-cabinets
• Front terminal

581732 Battery 12 V / 65 Ah
1

Emergency battery for usage in emergency power supply of Voice Alarm applications. Required ​
per 2 pieces.
Technical Data
Weight approx. 21.3 kg
Dimensions W: 348 mm H: 178 mm D: 163 mm

40 www.hls-austria.com
VARIODYN D1 Accessories

583535 Alarm transponder VARIODYN D1 1

1

The alarm transponder for VARIODYN D1 provides each 2 supervised relay outputs for optical ​
alarm signaling devices to provide alarms to people in very noisy areas or to deaf people. It works ​
independently, is driven by the VARIODYN D1 and this message to the VARIODYN D1 is reported ​ 2
in case of failure of the relay line.

The transponder is installed with in the cabinet of VARIODYN D1. 3

For the installation of the alarm transponder for VARIODYN D1, the following case is available as ​
an option:
-788603.10 (For DIN rail mounting in the enclosure cabinet or stand)
4
Features The power supply of the alarm transponder via the system's 24 V DC.
• Two supervised relay outputs for the system ​VARI- The alarm transponder is attached to the DOM and UIM or VARIODYN D1 Comprio.
ODYN D1, for connection of optical alarms Per relay line can be connected up to 10 visual alarm of the series Part No. 766410 ... 766 414 or ​
the series Part No. 766420. 5
• Per relay output can be connected up to 10 visual ​
alarm (Applicable types see accessories) The visual alarm, refer to the fire alarm systems catalog.
• Per DOM / UIM or Comprio can be connected up to 4 ​ Technical Data
alarm transponder Operating voltage 10 ... 28 V DC 6
Contact load relay 30 V DC / 1 A
Ambient temperature -10 °C ... 50 °C
Storage temperature -25 °C ... 75 °C
Weight approx. 28 g
Dimensions W: 82 mm H: 72 mm D: 20 mm 7
Accessories
788603.10 Top-hat rail mounting
766411…766414 Optical alarm signaling device
766420…766424 Optical alarm signaling device

788603.10 Module housing for top-hat mounting rail

1

For snap-on mounting rail of several electronic modules with 82 x 72 mm PCB size. Angled cable ​
entry.
Technical Data
Color Green

1 x UM-profile and 2x side panels

Application example with transponder Part No. 583535

41
 VARIODYN D1 Accessories

581310 Measuring microphone for D1 AVC in a 5’’ recessed ceiling h

​ ousing
1

System-tested sensing microphone for automatic volume control (AVC) of the VARIODYN D1 ​
system. This decoupled sensing microphone is mounted in a 5" ceiling loudspeaker (DL 130 ​const-
ruction, incl. fire dome) flush and invisibly inside the ceiling. Connection is accomplished by ​means
of an enclosed 3-pole XLR plug.
Technical Data
Transmission range 20 ... 16000 Hz
Sensitivity 2.5 mV
Sound level max. 157 dB
Impedance 2000 Ω
Ambient temperature -10 °C ... 55 °C
Weight approx. 1 kg
Features Dimensions Ø: 180 mm D: 135 mm

• Decoupled mounting in a ceiling loudspeaker housing

• Easy and quick installation

581316 Microphone P4, for AVC

1

Microphone for using the AVC functionality (Automatic volume control) of the DOM. The ​micro-
phone is installed in the affected area and connected via the XLR socket (Part No. 581320) ​to the
appropriate DOM input.
Technical Data
Transmission range 20 ... 16000 Hz
Sensitivity 2.5 mV
Sound level max. 157 dB
Impedance 2000 Ω
Weight approx. 400 g

581317 Mounting kit for microphone P4

Mounting kit for ALR microphone Part No. 581316.

HN-D32N Noise Detector

Features
HN-D32N Noise Detector is designed to collect ambient noise samples and transmit them to the
• Collect ambient noise from built-in microphone control system. The system can then automatically adjust the volume to deliver intelligible sound. It ​
• Elegant appearance is intended for use in areas such as metro station, airport, shopping mall, where noise level varies ​
• Easy field installation with spring loaded clips constantly and sound clarity is of utmost importance.
• 2-core shielded cable
• Transmission distance ＞ 200 meters Technical Data
Transmission range 60 ... 18000 Hz
Sensitivity 2.4 mV
Sound level max. 152 dB
Impedance 2000 Ω
Color white, similar to RAL 9010
Dimensions Ø: 200 x 118 mm

581320 Flush-mounted XLR panel jack

1

Flush-mounted box with a XLR socket 3-pole / GIRA System 55.

Technical Data
Color pure white / silk-mat

Accessories
581329 Surface mount

42 www.hls-austria.com
VARIODYN D1 Accessories

581329 Surface mount box 1

1

Surface mount frame for the Part No. 581320 to 581323 / GIRA System 55.
Technical Data 2
Color pure white / silk-mat

Delivery time on request

3

4
583496 End-of-Line module EOL
1

Part of EN 54-16 approval 5

End-of-line module for the end of the VARIODYN D1 voice alarm system loudspeaker line for ​stan-
dard-compliant monitoring, when more than 20 loudspeakers are connected to a line. The m
​ odule
is connected to the final loudspeaker at the end of the line.
Independent of the number and the output of the connected loudspeakers.
6
Technical Data
Weight approx. 20 g
Dimensions L: 40 mm W: 29 mm D: 11 mm 7
Declaration of Performance DoP-20997130701

Features
• Approved as per EN 54-16
• Standard monitoring
• Final element for 100 V of loudspeaker line in 2-wire ​
technology
• Different connection possibilities for optimum line ​
adaptation (3 connections)
• The module is sealed and has therefore an optimum ​
humidity protection

583386.21 Adapter TWI-RS232

1

Part of EN 54-16 approval

The TWI-RS232 adaptor serves for implementing of the TWI bus on RS232. Use for special ​servi-
cing and connecting an external system (e.g., a FACP IQ8Control or FlexES Control).

The TWI-RS232 adapter is connected directly to the DOM. The VARIODYN D1 system can be ​
controlled by the fire alarm control panel via this connection.
Faults in the VARIODYN D1 system are reported to the fire alarm control panel and can also be ​
reset via the external operating panels. The connection between the two systems is constantly ​
monitored for short-circuit and interruption. The system time and the date of both systems are ​
synchronized automatically (received from FAS -> DOM or DOM -> FAS - depending on selection).
Technical Data
Color black
Weight approx. 45 g
Dimensions L: 65 mm W: 33 mm H: 16 mm
Declaration of Performance DoP-20997130701

43
 VARIODYN D1 Accessories

583394.11 Fibre Optic Switch for Ethernet ring

1

Part of EN 54-16 approval

The Fiber Optic switch is used for designing an Ethernet network in loop topology. On account of ​
the loop structure, the network is fully redundant since, in the case of an fiber rupture, it is possible ​
to still communicate through the other side of the loop. In addition, every Fiber Optic switch has ​
two operating voltage inputs (24 V DC) and one relay for the forwarding of fault signals.
Technical Data
Operating voltage 12 ... 48 V DC
Power consumption 15 W
Ambient temperature -5 °C ... 45 °C
Storage temperature -40 °C ... 85 °C
Features Air humidity 15 ... 95 %
Type of protection IP 30
• 6-port 10/100/1000Tx Gigabit Ethernet Housing Metal
• 2-port 100/1000 SFP Slot Weight approx. 870 g
Dimensions W: 46 mm H: 142 mm D: 99 mm
• Configuration: Web GUI, Serial Console, CLI ​
Command The Fiber Optic switch can be equipped with one (for point-to-point connection) or two (for redundant ​
• Network Redundancy support: G.8032 ERPS,RSTP,​ loop connection) fiber optic module(s):
MSTP 583392.11 Fiber Optic module for FO Switch monomode for up to 2 km distances
• Supports IGMP v1/v2, up to 256 groups 583393.11 Fiber Optic module for FO Switch single mode for up to 20 km distances
• Supports IEEE802.1p QoS and CoS/ToS
• Supports IEEE802.1Q VLAN, SNMP v1/v2c/v3
• System Warning setting for automatic warning ​
through e-mail
• Redundant Power Input Design, 12 - 48 V
• Rugged Metal Case Design
• DIN-Rail Mounting, Wall Mounting (optional)

583392.11 Fiber Optic module for FO Switch, multimode

1

Part of EN 54-16 approval

Pluggable Fiber Optic module for the fiber optic switch 583394.11 in 1310 nm multimode. This ​
provide a Fiber Optic cable length up to 2 km.
Technical Data
Transmission distance max. 2 km
Fiber Multimode 50/125 µm, 62,5/125 µm
Features Ambient temperature -5 °C ... 45 °C
Air humidity 15 ... 95 %
• RoHS compliant Housing Metal
• Compliant with Fast Ethernet standard Weight approx. 100 g
• Compatible with SONET/SDH application
• Industry standard small form pluggable (SFP) ​
package
• Duplex LV connector
• Differential LVPECL inputs and outputs
• Single power supply 3.3V
• TTL signal detect indicator
• Hot Pluggable
• Class 1 laser product complies with EN 60825-1

44 www.hls-austria.com
VARIODYN D1 Accessories

583393.11 Fiber Optic module for FO Switch, single mode 1

1

Part of EN 54-16 approval

Pluggable Fiber Optic module for the fiber optic switch 583394.11 in 1310 nm single mode. This ​ 2
provide a Fiber Optic cable length up to 20 km.
Technical Data
Transmission distance max. 20 km 3
Fiber Singlemode 9/125 µm, 10/125 µm
Features Ambient temperature -5 °C ... 45 °C
Air humidity 15 ... 95 %
• RoHS compliant Housing Metal
• Compliant with Fast Ethernet standard Weight approx. 100 g 4
• Compatible with SONET/SDH application
• Industry standard small form pluggable (SFP) ​
package
• Duplex LV connector 5
• Differential LVPECL inputs and outputs
• Single power supply 3.3V
• TTL signal detect indicator
• Hot Pluggable
6
• Class 1 laser product complies with EN 60825-1

586115 Doormaster-Smart-PAL-Telephone interface 7

1

DOORMASTER-SMART-PAL-Telephone interface is used for recording the announcements via ​

similar telephone system in VARIODYN D1 voice alarm system. Up to 4 different call circuits or ​
areas can be addressed using the telephone system. For this purpose 1+ 4 control contacts are ​
available for switching on and/or zone selection.
The connection of telephone interface to VARIODYN D1 takes place via control inputs and audio ​
input of UIM Part. No. 583331.21. 12 V operating voltage can be generated from 24 V emergency ​
power supply with voltage converter Part No. 781336 that is available in the voice alarm system. ​
The voltage converter can be mounted in housing Part No. 788603 on the C-rail in rack.
The programming takes place with MFV post dial, so that the device can also be used from ​
distance.
Technical Data
Operating voltage 12 V DC
Current consumption @ 12 V DC approx. 100 mA
Contact load relay 24 V DC/0,5 A (relay 1/2)
24 V DC/1 A (relay 3/4)
Ambient temperature -5 °C ... 45 °C
Mounting mounting rail
Dimensions W: 52 mm H: 89 mm D: 57 mm

Accessories
586116 Power supply for telephone interface

Analog Telephone 586115 Doormaster Power Supply 586116

12 V Power Supply

Contacts NF Audio

UIM

586116 Power supply for telephone interface

1

Power supply for telephone interface Part No. 586115.

Technical Data
Rated voltage 127 / 230 V AC
Output voltage 13 V AC
Output current max. 0.6 A

45
 VARIODYN D1 Accessories

583703 Mounting kit 1

1

Each contains 24 cage nuts, screws and washers.

583704 Dummy plate 1 HU

1

Dummy plate in VARIODYN D1 design with 1 HU to cover open slots in upright cabinets.

583705 Dummy plate 2 HU

1

Dummy plate in VARIODYN D1 design with 2 HU to cover open slots in upright cabinets.

583706 Dummy plate 3 HU

1

Blind cover in VARIODYN D1 design with 3 HU to cover free installation space in upright cabinets.

583707 Dummy plate 4 HU

1

Dummy plate in VARIODYN D1 design with 4 HU to cover open slots in upright cabinets.

583708 Ventilation panel 1 HU (without branding)

1

Ventilation panel in VARIODYN D1 Design with 1 height unit and without branding.

583708.HO Ventilation panel 1 HU (Honeywell branding)

1

Ventilation panel in VARIODYN D1 Design with 1 HU and with Honeywell branding.

583709 Dummy plate 4 HU (DCSF)

1

Dummy plate to install a fire stations DCSF12 or DCSF1 in the upright cabinets. The dummy plate ​
has a height of 4 HU and is available on a cutout for telephone station and the holes for the fixing ​
screws. The mounting screws are included in shipping.

583710 Dummy plate 4 HU (DCSF/DKM)

1

Dummy plate to install 2 fire stations DCSF12 or DCSF1 in the upright cabinets. The dummy plate ​
has a height of 4 HU and is available on 2 cutouts for microphone units or DKM18. To install a ​
digital key module DKM18, the installation kit Part No. 583507 and a standard RJ11 cable is ​
required.

46 www.hls-austria.com
VARIODYN D1 Surge Protection Module

Surge Protection 2

for VARIODYN D1 3

The following table shows the surge protection modules for voice alarm system VARIODYN D1, 4
according to the line to be protected and the application:

Line to be protected Protection module Notes 5

Mains connection 584100 Adapted for 230 V AC or 380 V AC

6
applications
100 V speaker lines 584101
7
Contacts, digital inputs and outputs
of the control components such
as DOM, UIM, CIM, Comprio 584101

Ethernet 584102

DAL bus 584102 CAT5 line length up to 250 m

47
 VARIODYN D1 Surge Protection Module

584100 Surge voltage protection module for connection to the mains

1

Approvals KEMA, VDE, UL

Overvoltage protection module to protect the mains connection of a VARIODYN D1 voice alarm ​
system. The overvoltage protection module can be used for 230 V AC or 380 V AC mains ​connec-
tions and can be accommodated with its housing for DIN rail installation quickly and easily ​in the
19" cabinet.

Features
• Protect single-phase 230 V AC mains connections
• Protect three-phase 380 V AC mains connections

584101 Surge voltage protection module for loudspeaker cables

1

Approvals KEMA, VDE, UL, VdS, CSA

Overvoltage protection module to protect the 100 V loudspeaker lines of a VARIODYN D1 voice ​
alarm system or of the dry contact or digital inputs and outputs of the control components, such as ​
DOM, UIM, CIM, Comprio. The overvoltage protection module can be housed with its housing for ​
DIN rail installation quickly and easily in the 19" cabinet.

Features
• Protect 100 V loudspeaker lines
• Protect contact or digital inputs and outputs of the ​
control components, such as DOM, UIM, CIM, ​
Comprio

584102 Surge voltage protection for Ethernet or DAL bus

1

Approvals CSA, UL, GOST

Overvoltage protection module to protect the Ethernet or DAL bus lines of a VARIODYN D1 voice ​
alarm system. The overvoltage protection module can be housed with its housing for DIN rail ​
installation quickly and easily in the 19" cabinet.

Features
• Protect Ethernet
• Protect DAL bus

48 www.hls-austria.com
VARIODYN D1 Interface to Fire Control Panels

772386 Interface module RS232 / 24 V 1

1

For the serial essernet interface for a length up to 15 m.

2

788606 Housing for SEI

1

3
Housing for the serial essernet interface (SEI).

784840.10 essernet module, 62.5 kBd for IQ8Control 6

1

Network interface module for max. 16 network participants. Transmission via Token-Passing ​
protocol, similar to DIN 19245-1 (Profibus) loop technology, interruption and short-circuit tolerance.
7

784841.10 essernet module, 500 kBd for IQ8Control

1

Network interface module such as essernet module Item no. 784840.10, however for max. 31 ​
network participants.

784856 SEI serial essernet interface EDP, bidirectional

1

The serial essernet interface can be used as a gateway to link remote computers that support the
ESSER by Honeywell data protocol (EDP). The EDP version (bidirectional) with remote control
options e.g. for the connection to a Building ​Management System (BMS). The unit includes a slot
for an essernet module and is therefore a fully functional unit within the short circuit and open
circuit resistant essernet.

Technical Data
Features Operating voltage 10.5 ... 28 V DC
Current consumption @ 12 V DC approx. 60 mA
• Serial data rate 19.2 kBd Current consumption @ 24 V DC approx. 30 mA
• RS 485 interface on-board for a max. length of Storage temperature -10 °C ... 50 °C
Air humidity < 95 % (non-condensing)
1,000 m
Ambient temperature -5 °C ... 50 °C

The essernet micromodule and the interface module either RS 232 (Part No. 772386) or TTY (Part No. ​
772387) are not included and must be ordered separately in accordance with the required essernet type ​
and the serial transmission standard. The optional interface module must be ordered separately and is a ​
supplement to the serial essernet interface. It is plugged into the connectors provided on the main PCB. ​
Depending on the required application, a TTY /CL 20 mA (Part No. 772387) or a RS232 / V.24 (Part No. ​
772386) interface module may be installed on the serial essernet interface.
When using virtual control groups (PA/VA), a hardware output shall be provided on the FACP side per ​
virtual control group, e.g. through the output of an esserbus coupler.To avoid any kind of problem, ​
please contact the International Sales Support for advice before quoting or installing the serial essernet ​
interface!

Accessories
788606 Housing kit
772386 Interface module RS 232/24 V
772387 Interface module TTY/CL 20 mA
784840.10 essernet micromodule (62.5 kBd)
784841.10 essernet micromodule (500 kBd)

49
 VARIODYN D1 Interface to Fire Control Panels

788603.10 Module housing for top-hat mounting rail

1

For snap-on mounting rail of several electronic modules with 82 x 72 mm PCB size. Angled cable ​
entry.
1 x UM-profile and 2x side panels

Application example with transponder Part No. 583535

805683 External power supply DCU 2403

1

Approval: G 210052
External power supply in a compact metal housing for up to two 12 V/ 24 Ah batteries. This power ​
supply facilitates an uninterruptable supply of power. Integration into the esserbus/esserbus-Plus ​
optional via optional adapter card (Part No. 805684.10) and esserbus Transponder (Part No. ​
808623). Four floating relay outputs are available for the transmission of disturbances (power ​
failure, ground fault, battery failure and collective fault). External LED display for operation and ​
collective fault on the lockable front door, internal LEDs for detailed recognition of emergency ​
power operation, individual monitoring of battery failure and ground fault.
Batteries used in the power supply must be tested and VdS approved. Batteries of the same age from ​
Features the same manufacturer coming from the same production batch must be used when connecting batteries ​
in parallel.
• Reversible output voltage 12 V DC or 24 V DC
• Simple integration into esserbus/esserbus-Plus Pre-installed connector cable for 12 V / 24 Ah SB-type battery (Part No. 018006)
• Internal service LED displays Housing lock with key
• Four floating relay outputs Device accessory kit contains: dummy cover, jumper bar for standby terminal, device fuses, jumper for ​
• Monitoring of mains voltage with selectable delay ​time setup of output voltage
• Individual battery monitoring for emergency power ​ Accessories
operation 805684.10 Adapter card for DCU 2402
• Switchable ground fault monitoring 808623 esserbus alarm transponder
• Front door with cover contact
• in compliance with EN 54-4/A2
• for use in voice alarms to supply recessed ​compo-
nents, such as at fiber optic recessed callsta­tions

781336 DC/DC converter output voltage 12 V DC

1

Approval: VdS
The converter provides a galvanically isolated 12 V power supply for a detector for special ​applica-
tions. The input voltage is 12 V, and it is supplied from the fire alarm control panel or from ​an
external PSU. The module can be integrated into the 120240, 788600, 788601, 788603, ​
788650.10, or 788651.10 enclosures.
When planning the project, please pay attention to primary (12 V) current drain in case of a mains ​
failure.
The module can also be used in explosion endangered zones for the galvanic separation of the esserbus ​
voltage supply.
Features
• Galvanic isolation of DC voltage potentials
• Voltage interface, for instance for 12 V DC operation ​
of couplers in an 8010 Series 3 extinguishing system.
• Connecting terminals up to 1.5 mm²
• short-circuit proof

50 www.hls-austria.com
VARIODYN D1 Interface to Fire Control Panels

583386.21 Adapter TWI-RS232 1

1

Part of EN 54-16 approval

The TWI-RS232 adaptor serves for implementing of the TWI bus on RS232. Use for special ​servi- 2
cing and connecting an external system (e.g., a FACP IQ8Control or FlexES Control).

The TWI-RS232 adapter is connected directly to the DOM. The VARIODYN D1 system can be ​
controlled by the fire alarm control panel via this connection. 3
Faults in the VARIODYN D1 system are reported to the fire alarm control panel and can also be ​
reset via the external operating panels. The connection between the two systems is constantly ​
monitored for short-circuit and interruption. The system time and the date of both systems are ​ 4
synchronized automatically (received from FAS -> DOM or DOM -> FAS - depending on selection).

51
 VARIODYN D1 VARIODYN D1 PAMMI Plus

Features The VARIODYN D1 PAMMI Plus management system: easy and convenient display of VARIODYN ​
• Multiple PAMMI Plus clients on a server D1 system information and for operation and use of the voice alarm and public address system as ​
• Audio Streaming in VARIODYN D1 well. It’s installed on a PC running the Windows operating system as a software application and ​
• Server computer in a redundant layout, optionally with ​ offers optimum flexibility and freedom of control and use.
automatic switching The graphical user interface can be customized for a particular property, thus being very useful. ​
• Control of VARIODYN D1 and its VARIODYN D1 ​ Whether the customer requires list displays, building plans, or other graphical representations, with ​
3000 predecessor system from a control panel PAMMI Plus everything is straightforward and quickly possible.
• Interface with various display systems (manufacturer-​ The entire voice alarm and public address system can therefore be serviced and controlled from ​
specific) one or many locations, thanks to the reliable server/client structure of PAMMI Plus,
• Interface with Automatic Train Control (manufacturer-​ This represents a great benefit and cost-savings potential to facilities such as airports, train ​
specific) stations, multi-branch industrial plants, hotels, shopping centers, and more.
• Interface with SCADA (manufacturer-specific)
• Interface with radio and phone via DTMF PAMMI Plus = Public Address Man Machine Interface Plus
• Indicate system status (such as error signals)
• Graphical overview of zones + zone prefixes This product offers such a wide range of functionalities, that this description can only focus on a ​
• Display of occupied zones fraction of its abilities. Therefore a detailed conversation with one of our specialists in any case is ​
• Setting off standard texts / alarms (in connection with ​ worthwhile.
SCU)
• Audio database for announcements
• Assembly of automatic announcements ("Flight ​
LH3434 to Vienna is ready for boarding")
• Multiple languages with variables in different orders
• Scheduler for timed release of announcements (once, ​
multiple times)
• Live announcements (in combination with call station ​
of the VARIODYN D1 with PAMMI Plus)
• Start playing music
• Logging of announcements, error signals, alarms, etc.
• Safe user administration against unauthorized access 
• Priority control
• Instant messaging (inclusion of announcement and ​
repeated release)
• Previewing of recordings before release
• Simple and convenient programming, commissioning ​
and use via a Windows user interface

52 www.hls-austria.com
VARIODYN D1 VARIODYN D1 PAMMI Plus

583651 PAMMI Plus PA server 1

1

The PAMMI Plus server applications is the core of the VARIODYN D1 PAMMI Plus Management ​
System. It realises system control and communication with the components of the VARIOIDYN D1 ​
voice alarm system and the PAMMI Plus client via Ethernet. The PAMMI Plus server manages and ​ 2
controls, for instance, the announcements and audio information of various PAMMI clients, the ​
timed information. Furthermore, it is often possible to incorporate other systems in the object, such ​
as flight control systems, person information systems, train traffic control systems, or text-to-​ 3
Features speech systems into the PAMMI Plus Management System. Apart from our current VARIODYN D1 ​
• Supports to stream audio into VARIODYN D1 voice alarm and public address system, existing VARIODYN D1 3000 systems can obviously be ​
• Checking and monitoring of alarms and evacuation incorporated as well. Here too, we are fully backward compatible. Parallel to the PAMMI Plus ​
• Checking and monitoring of announcements and ​ server, an additional PC can be operated in hot standby mode, to which one can switch, if ​neces- 4
other audio notifications, scheduling of announce­ sary. This means that we have a fully redundant solution with optimal failure safety.
ments
• Interface to further functions in the facility PAMMI Client
• Display and checking of system status of the ​VARI-
5
PA Server
ODYN D1 system
• Software license including USB-Dongle
6

DOM/
Power amplifiers 7

VARIODYN® D1
COMPRIO
LAN TCP/IP
DCS15.RE SCU

583652 PAMMI Plus client

1

PAMMI Plus client Application is a PC workstation with which the input can be made in PAMMI ​
Plus and the information can be retrieved. PAMMI Plus client is the graphical user interface or the ​
operating station. PAMMI Plus client is connected with PAMMI Plus Server via Ethernet and can be ​
set up in a customer specific way. Many PAMMI Plus clients can be operated with one PAMMI Plus ​
server.
In connection with the call station of VARIODYN D1 system, live announcements and buffered ​
Features messages with the PAMMI Plus clients can be released or controlled. Thus, the user can e.g. ​
• Supports to stream audio into VARIODYN D1 narrate, save and control the message. After controlling, the message can be then be released. ​
• Graphical User Interface This prevents the danger of false announcements or live announcements of bad quality.
• Checking and monitoring of alarms and evacuation
• Management and control of announcements and ​
other audio information, timing of announcements
• Volume and sound control
• Zone selection
• Logbook for documentation of the listed functions
• Display and checking of system status of the ​VARI-
ODYN D1 system
• Software license including USB-Dongle

53
 VARIODYN D1 VARIODYN D1 PAMMI Plus

583653 PAMMI Plus server/client

1

Combination of PAMMI Plus server (Part No. 583651) and client software (Part No. 583652), so ​
that the entire PAMMI Plus Management System can be operated with full functionality on a PC.
This software includes the complete functionality of PAMMI Plus server (Part No. 583651) and ​
client (Part No. 583652). Software license including USB-Dongle.

Features PAMMI Server and PAMMI Client

on the same workstation
• Supports to stream audio into VARIODYN D1 (speciall lizence required)
• Graphical User Interface
• Checking and monitoring of alarms and evacuation
• Management and control of announcements and ​
other audio information, timing of announcements
• Volume and sound control DOM/
• Zone selection Power amplifiers
• Logbook for documentation of the listed functions
• Display and checking of system status of the ​VARI-
ODYN D1 system Variodyn D1
• Software license including USB-Dongle COMPRIO
LAN TCP/IP
DCS15.RE SCU

54 www.hls-austria.com
VARIODYN D1 Cable Overview

583401.21 Control cable 12 for UIM 1

1

Prefabricated cabling from 12 control contacts of the UIM to the cabinet rear panel; up to 4 pieces ​
connectable per UIM.
2

3
583422.21 Backup cable RC 22 VARIODYN D1
1

Prefabricated cabling of 2 accident channels to 4 user channels

4

583444 Backup cable RC 44 VARIODYN D1, 2 m 5

1

Prefabricated cabling of 4 auxiliary channels on 4 bearer channels.

6

583444.10 Backup cable RC 44 VARIODYN D1, 0.5 m

1

Prefabricated cabling of 4 accident channels on 4 user channels. Short version for Comprio ​appli-
cations.

583441 Backup cable RC 41 VARIODYN D1, 2 m

1

Prefabricated cabling of a general average channel on 3 user channels, for the 3:1 average in ​
conjunction with a four-channel amplifier 4XD125B (Part No. 580242) or 4XD250B (Part No. ​
580243).

583441.10 Backup cable RC 41 VARIODYN D1, 0.5 m

1

Prefabricated cabling of a general average channel on 3 user channels, for the 3:1 average in ​
conjunction with a four-channel amplifier 4XD125B (Part No. 580242) or 4XD250B (Part No. ​
580243). Length 2 m. Short version for Comprio applications.

583451.21 Cable for cabinet rear panel DOM4-8

1

Prefabricated cabling of the 100 V outputs of DOM4-8 to the cabinet back wall; per DOM4-8, 1 ​
piece can be connected. Also suitable for the wiring of the switching contacts of the DOM4-X to the ​
cabinet back wall.

583452.21 Cable for cabinet rear panel DOM4-24

1

Prefabricated cabling of the 100 V outputs of DOM4-24 to the cabinet back wall; per DOM4-24, up ​
to 4 pieces can be connected.

55
 VARIODYN D1 Cable Overview

583476.21 Output cable amplifier DOM

1

Prefabricated cabling of power amplifiers, 2 channels (max. 100 V) to the DOM.

583477.21 Output cable 2 amplifier DOM

1

Prefabricated cabling of power amplifiers, 4 channels (max. 100 V) to the DOM.

583471.21 Input cable DOM (G1) - XV amplifier (G1)

1

Prefabricated cabling from DOM to power output amplifier, 2 channels (LF, control).

583472.21 Input cable DOM (G1) – amplifier (as of G2)

1

Cable for connecting older 1st generation devices with the current 2nd generation models.

583473.21 Input cable DOM (G1) – amplifier (as of G2)

1

Cable for connecting older 1st generation devices with the current 2nd generation models.

583410 Connection cable battery -PSU

1

Cable set for connecting batteries to the emergency power supply (Part No. 581721) onto the ​
VARIODYN D1.

583481A CAT5 patch cable, 1 m blue (DAL)

1

583482A CAT5 patch cable, 2 m blue (DAL)

1

583483A CAT5 patch cable, 3 m blue (DAL)

1

56 www.hls-austria.com
VARIODYN D1 Cable Overview

583486A CAT5 patch cable, 1 m yellow (Ethernet) 1

1

583487A CAT5 patch cable, 2 m yellow (Ethernet) 2

1

3
583488A CAT5 patch cable, 3 m yellow (Ethernet)
1

4
583466A CAT5 patch cable, 0.5 m gray (Periphery)
1

5
583467A CAT5 patch cable, 1 m gray (Periphery)
1

6
583469A CAT5 patch cable, 3 m gray (Periphery)
1

583489 XLR cable 1 m, plug jack length 1 m

1

Audio-connection cable with a XLR plug and XLR jack, e.g. for connecting an external audio d​ evice
to the UIM.

583490 XLR cable 10 m, plug jack length 10 m

1

Audio-connection cable with a XLR plug and XLR jack, e.g. for connecting an external audio d​ evice
to the UIM.

583491A CAT5 patch cable, 0,5 m green (DOM to amplifier)

1

Prefabricated cable from the DOM to the 2-channel power amplifier. If a 4 channel amplifier is ​
used, this cable is needed two times.

583492 Audio-connection cable length 1.8 m

1

Audiocable, stereo-cinch.

583414 Cable set 24 V DC VARIODYN D1 Comprio 4XD

1

Standard cable set for connecting Comprios to the amplifier 4XD125B or 4XD250B.

57
 VARIODYN D1 Cable Overview

583413 Cable set for connecting batteries to VARIODYN D1 4XDxxxB ​amplifier

1

Standard cable set for internal housing connection of the batteries to the amplifier 4XD125B or ​
4XD250B.

581340 Peripheral clip for top hat rail

1

Adapter box to connect peripheral components, such as for example analog microphones, to the ​
VARIODYN D1. The incoming installation cable is connected directly to the installation box.
Also, the cable shield of the installation cable can be connected in the adapter box.
The output of the adapter box is connected directly via a pluggable power cable (Part No. ​
583466A, 583467A or 583469A) with the corresponding input of the VARIODYN D1. The pin ​assig-
nments for the individual applications are listed in the VARIODYN D1 installation instructions ​(Part
No. 798663).
Please order a suitable CAT5 cable from our product portfolio (e.g. Part No. 583466A)

58 www.hls-austria.com
 1

Sound System Sound System 60

59
 Sound System

581352 MMA 240 mixing amplifier

1

Five zone mixing amplifier with 240W rated output power. The device is designed for background
music and public address broadcast for up to five different zones. One slot for interchangeable
music source modules, 6 Mic/Line inputs, gain control, paging microphone input, chime function,
phantom power, priority inputs, graphic equalizer, five zone selector.

Technical Data
Harmonic distortion at the nominal level < 0.5 %
Channel separation > 90 dB
Transmission range 50 ... 15000 Hz
Rated voltage 230 V AC
Power consumption 280 W
Weight approx. 9.7 kg
Dimensions W: 420 mm H: 88 mm D: 320 mm

581353 FM/AM/USB/SD player

1

FM/AM/USB/SD radio tuner and player, designed to play compressed audio files.
Volume control, equalizer, mute function, input source selection, repeat, random functions.
For MMA 240 Mixing amplifier (581352) only!

Technical Data
Operating voltage 12 V DC
Current consumption 0.5 A
Harmonic distortion at the nominal level < 0.1 %
Channel separation > 70 dB
Transmission range 87.5 ... 108 Hz
Weight approx. 9.7 kg
Dimensions W: 420 mm H: 88 mm D: 320 mm

581355 TALK ST table stand

1

Microphone stands for XLR gooseneck microphones (TALK C1 or TALK D) with

on/off ​switch.
Connector: Microphone input: 3-pin female XLR
Cable: 3-pin male XLR
Characteristics:
Plug-in metal desk stand with on/off switch for microphones with XLRM connec-
tors
Technical Data
Color black
Weight approx. 0.9 kg
Dimensions W: 45 mm H: 110 mm D: 140 mm

Not included is the connection to MMA 240 mixing amplifier (581352) via 1 m ​(583489) or 10 m (583490)
XLR cable.

581357 TALK D dynamic microphone

1

Dynamic gooseneck microphone with robust body and steel grill capsule basket.
Designed ​for paging purposes. It can be used with TALK ST stands for fixed
installation as desktop ​microphone. XLR connector is integrated into the metal
body. Supplied with windscreen.

Technical Data
Transmission range 150 ... 12000 Hz
Color black
Weight approx. 176 g
Dimensions L: 425 mm

60 www.hls-austria.com
 1

Loudspeaker EN 54-24 Ceiling Loudspeaker 60-63

Cabinet Loudspeaker 64-67
Horn Loudspeaker 68-69
Sound Projector 70-71
Spherical Loudspeaker 72
Column Loudspeaker 73

61
 Loudspeaker EN 54-24 Ceiling Loudspeaker

Important information on sound pressure level specifications:

In the EN 54 Part 24 product standard, the specification of the sound pressure level is defined in ​
the form of an average bandwidth (frequency range from 88.6 Hz to 11.3 kHz).

This parameter so called Sensitivity which is referred to in EN standards and thus crucial for ​
project planning for loudspeakers. In our catalog you will only find sound pressure level measured ​
according to the EN standards for EN 54-24 loudspeakers.

LSC-506 6 W 5" ceiling loudspeaker EN 54 with fire dome, metal

1

Approval as per EN 54-24, 0359/CPD/00138

This voice alarm ceiling loudspeaker is specifically designed for use in buildings where ​perfor-
mance of systems for voice evacuation announcements is governed by regulations. It is ​designed
for flush mounting in suspended ceiling and ideal for even sound distribution. The ​appearance and
neutral white RAL 9003 color have been selected to be unobtrusive in virtually all ​interiors. The fire
dome increases protection of the cable termination. The driver unit is ​impregnated against mois-
ture. For additional safety, this EN 54-24 ceiling loudspeaker features a ​ceramic terminal block and
a thermal fuse.
Technical Data
Rated Power 6 W
Transformer power taps 6 / 3 / 1,5 / 0,75 W
Rated impedance 1,7 / 3,3 / 6,7 / 13 kΩ
129 mm

Sensitivity EN 54-24, 1 W / 1 m 91 dB
Sensitivity EN 54-24, max 1 m 99 dB
Transmission range 180 ... 20000 Hz (-10 dB)
155 mm Dispersion angle 173° (H), 174° (V) @ 1 kHz
Ambient temperature -25 °C ... 55 °C
Storage temperature -40 °C ... 70 °C
181 mm

Air humidity < 95 %

Material Metal
Color white, similar to RAL 9003 / red similar to RAL 3000
Weight approx. 1.29 kg
Cut-out size (Ø min.) 155 mm
Dimensions Ø: 181 mm D: 129 mm
Declaration of Performance CPR-DoP-2013002

Delivery time on request.

LSC-606 6 W 6.5" ceiling loudspeaker EN 54 with fire dome, metal

1

Approval as per EN 54-24, 0359/CPD/00138

This voice alarm ceiling loudspeaker is specifically designed for use in buildings where ​perfor-
mance of systems for voice evacuation announcements is governed by regulations. It is ​designed
for flush mounting in suspended ceiling and ideal for even sound distribution. The ​appearance and
neutral white RAL 9003 color have been selected to be unobtrusive in virtually all ​interiors. The fire
dome increases protection of the cable termination. The driver unit is ​impregnated against mois-
ture. For additional safety, this EN 54-24 ceiling loudspeaker features a ​ceramic terminal block and
a thermal fuse.
Technical Data
Rated Power 6 W
Transformer power taps 6 / 3 / 1,5 / 0,75 W
Rated impedance 1,7 / 3,3 / 6,7 / 13 kΩ
129 mm

Sensitivity EN 54-24, 1 W / 1 m 91 dB
Sensitivity EN 54-24, max 1 m 99 dB
Transmission range 170 ... 20000 Hz (-10 dB)
195 mm Dispersion angle 170° (H), 171° (V) @ 1 kHz
Ambient temperature -25 °C ... 55 °C
Storage temperature -40 °C ... 70 °C
222 mm

Air humidity < 95 %

Material Metal
Color white, similar to RAL 9003 / red similar to RAL 3000
Weight approx. 1.57 kg
Cut-out size (Ø min.) 195 mm
Dimensions Ø: 222 mm D: 129 mm
Declaration of Performance CPR-DoP-2013002

Delivery time on request

62 www.hls-austria.com
Loudspeaker EN 54-24 Ceiling Loudspeaker

582480 24 W 6.5" 2-way ceiling loudspeaker EN 54, metal 1

1

Approval as per EN 54-24, 0359/CPD/00455

The 6.5" ceiling loudspeaker with its 2-way system features an excellent sound quality. It offers a ​ 2
broad frequency range and a high sound pressure level, thereby guaranteeing excellent music and ​
speech reproduction. It is eminently suitable for demanding sound applications such as bistros, ​
restaurants, hotels, and many other public locations. The ceramic terminal block and the thermal ​
fuse increase the protection for the loudspeaker lines. The driver unit is impregnated against ​mois- 3
ture. The loudspeaker complies with standard BS 5859 Part 8, and is certified in accordance ​with
EN 54 Part 24.
Technical Data 4
Rated Power 24 W
129 mm
Transformer power taps 24 / 12 / 6 / 3 W
Rated impedance 0,42 / 0,83 / 1,67 / 3,33 kΩ
Sensitivity EN 54-24, 1 W / 1 m 91 dB
Sensitivity EN 54-24, max 1 m 103 dB 5
Transmission range 120 ... 20000 Hz (-10 dB)
195 Dispersion angle 165° (H) / 167° (V) @ 1 kHz
mm Ambient temperature -20 °C ... 55 °C
226 mm Storage temperature -40 °C ... 70 °C
Air humidity 0 ... 95 % 6
Material Metal
Color white, similar to RAL 9003
Weight approx. 2.25 kg
Cut-out size (Ø min.) 195 mm
Dimensions Ø: 226 mm D: 129 mm 7
Declaration of Performance CPR-DoP-2014004

582402 10 W 8" ceiling loudspeaker EN 54, metal

1

Approval as per EN 54-24, 1438/CPD/0233

Ceiling mount loudspeaker in plastic coated metal work with high efficiency and moisture proof ​
broadband loudspeaker chassis, certified as per EN 54-24.
DL 10-200/T-EN 54 (200 mm Chassis) has maximum power of 20 W and can be adjusted to 6 W, ​
10 W or 1.5 W if required. Spring clamps with cropped leg spring, with high clamping force, and ​
short tension distance enables a quick and easy mounting. A smart inner ring prevents the grille ​
from collapsing even under heavy load due to environmental influences. For additional protection, ​
this EN 54-24 ceiling mount loudspeaker is assembled with ceramic clamp and thermal fuse as ​
well as equipped with a fire dome. It has PG16-cable outlet and a blind cover. The fire dome ​
prevents the suction effect of the chimney at the suspended ceiling in case of fire, after possible ​
burning of the loudspeaker membrane.
234 mm 268
197mm mm Technical Data
120 mm Rated Power 10 W
Transformer power taps 10 / 6 / 3 / 1,5 W
Sensitivity EN 54-24, 1 W / 1 m 93.9 dB
Sensitivity EN 54-24, max 1 m 103.4 dB
217
mm
188 Transmission range 243 ... 19700 Hz (-10 dB)
mm
Dispersion angle 178° @ 1kHz
Ambient temperature -20 °C ... 80 °C
Color white, similar to RAL 9010
Weight approx. 2.1 kg
Cut-out size (Ø min.) 238 mm
Dimensions Ø: 268 mm D: 217 mm
Declaration of Performance 001-13

Delivery time on request

63
 Loudspeaker EN 54-24 Ceiling Loudspeaker

582400 Recessed Ceiling Loudspeaker DL 06-130/T-EN54

1

Approval as per EN 54-24, 1438/CPD/0233

Modern ceiling installation loudspeaker in plastic-coated metal design
(RAL 9010) with h ​ igh efficiency and moisture-proof broadband loudspeaker
chassis, certified as per EN54-​24.
DL 06-130/T-EN54 (130 mm chassis) has a maximum power of 6 W and can be
modified ​to 3 W or 1.5 W if required. Spring clamps with cropped leg spring,
increased clamp force ​and shortened tension distance allow you to assemble it
quickly and easily. A smart inner ​ring mounting prevents the grille from collapsing
even under high load due to environ­mental influences. For additional safety, this
EN54-24 ceiling installation loudspeaker is ​equipped with a ceramic clamp and
thermal fuse, and fitted with a fire dome. It has a PG16 c​ able outlet and blind
cover. The fire dome prevents the suction action of the chimney ​effect with
suspended ceilings in case of fire, after some of the loudspeaker membrane has ​
been burnt through.
Technical Data
Loading capacity 6 W
Transformer power taps 6 / 3 / 1,5 W
Sensitivity EN 54-24, 1 W / 1 m 93.5 dB
Sensitivity EN 54-24, 1 m 101.3 dB
Transmission range 350 ... 13.800 Hz
Dispersion angle 180° (H), 180° (V)
Ambient temperature -20 °C ... 80 °C
Color white, similar to RAL 9010
Weight approx. 1.17 kg
Ceiling opening (Ø min.) 165 mm
Dimensions Ø: 180 mm D: 106 mm

Delivery time on request

582401 Recessed Ceiling Loudspeaker DL 06-165/T-EN54

1

Approval as per EN 54-24, 1438/CPD/0233

Modern ceiling installation loudspeaker in plastic-coated metal design
(RAL 9010) with h ​ igh efficiency and moisture-proof broadband loudspeaker
chassis, certified as per EN54-​24.
DL 06-165/T-EN54 (165 mm chassis) has a maximum power of 6 W and can be
modified ​to 3 W or 1.5 W if required. Spring clamps with cropped leg spring,
increased clamp force ​and shortened tension distance allow you to assemble it
quickly and easily. A smart inner ​ring mounting prevents the grille from collapsing
even under high load due to environ­mental influences. For additional safety, this
EN54-24 ceiling installation loudspeaker is ​equipped with a ceramic clamp and
thermal fuse, and fitted with a fire dome. It has a PG16 c​ able outlet and blind
cover. The fire dome prevents the suction action of the chimney ​effect with
suspended ceilings in case of fire, after some of the loudspeaker membrane has ​
been burnt through.
Technical Data
Loading capacity 6 W
Transformer power taps 6 / 3 / 1,5 W
Sensitivity EN 54-24, 1 W / 1 m 93.5 dB
Sensitivity EN 54-24, 1 m 101.3 dB
Transmission range 404 ... 10.100 Hz
Dispersion angle 180° (H), 180° (V)
Ambient temperature -20 °C ... 80 °C
Color white, similar to RAL 9010
Weight approx. 1.36 kg
Ceiling opening (Ø min.) 200 mm
Dimensions Ø: 220 mm D: 112 mm

Delivery time on request

64 www.hls-austria.com
 Loudspeaker EN 54-24 Ceiling Loudspeaker

582404 Recessed Ceiling Loudspeaker DL 10-165/T plus-EN54 1

1

Approval as per EN 54-24, 1438/CPD/0233

High-quality 2-way ceiling installation loudspeaker in plastic-coated metal design ​ 2
(RAL 9010) with excellent sound quality. This EN54-24 certified loudspeaker is
optimally ​protected against humidity by a moisture-proof chassis.
DL 10-165/T plus-EN54 (165 mm chassis) has a maximum power of 10 W and
can be ​modified to 6 W, 3 W or 1.5 W if required. It is best suited for demanding 3
audio system p ​ rojects like bistros, restaurants, hotels and many other facilities of
public life. Spring ​clamps with cropped leg spring, increased clamp force and
shortened tension distance ​allow you to assemble it quickly and easily. 4
For additional safety, the loudspeaker is equipped with a ceramic clamp and
thermal fuse. ​A fire dome completes the safety equipment of this loudspeaker. It
has a PG16 cable outlet ​and blind cover. The fire dome prevents the suction
action of the chimney effect with s​ uspended ceilings in case of fire, after some of 5
the loudspeaker membrane has been burnt ​through.

Technical Data
Loading capacity 10 W 6
Transformer power taps 10 / 6 / 3 / 1,5 W
Sensitivity EN 54-24, 1 W / 1 m 87.7 dB
Sensitivity EN 54-24, 1 m 97.7 dB
Transmission range 374 ... 23.400 Hz 7
Dispersion angle 180° (H), 180° (V)
Ambient temperature -20 °C ... 80 °C
Color white, similar to RAL 9010
Weight approx. 1.66 kg
Ceiling opening (Ø min.) 200 mm
Dimensions Ø: 220 mm D: 134 mm

Delivery time on request

582406 2x6 W 2x4" ceiling loudspeaker EN 54, metal

1

Approval as per EN 54-24, 1438/CPD/0233

The A/B-line ceiling loudspeaker for voice alarm systems is certified in accordance with EN 54-24 ​
and offers maximum safety for voice alarm projects.
The DL-AB 06- 200/T-EN 54 features two mutually independent chassis and two 100 V output ​
transformers, and allows for a cost-effective supply via two separate (A/B) lines. In the event of a ​
failure of one line, the loudspeaker redundancy allows continued acoustic notification of the ​
respective area. For every installation position, the presence of an A line as well as of a B line ​
provides redundancy. The DL-AB 06-200/T-EN 54 ceiling loudspeaker made out of powder-coated ​
metal features 2 x 6 W output. it can be adjusted to 2 x 3 W or 2 x 1.5 W, and is equipped with a ​
fire dome. It features two cable ducts. The fire dome prevents the chimney suction effect with ​
236 mm hanging ceilings in case of a fire, for instance after the blow-out of the loudspeaker membrane. ​
196 mm
267
mm
Both A/B-line loudspeakers respective feature 2 integrated ceramic terminals and 2 thermal fuses.
120
mm Technical Data
Rated Power 12 W
Transformer power taps 2x6 / 3 / 1,5 W
135 Sensitivity EN 54-24, 1 W / 1 m 89.8 dB
138
mm mm Sensitivity EN 54 (double) 92.8 dB
Sensitivity EN 54-24 max (double) 100.3 dB
Sensitivity EN 54-24, max 1 m 97.3 dB
Transmission range 162 ... 18600 Hz (-10 dB)
Dispersion angle 145° @ 1kHz
Ambient temperature -20 °C ... 80 °C
Color white, similar to RAL 9010
Weight approx. 2.02 kg
Cut-out size (Ø min.) 236 mm
Dimensions Ø: 267 mm D: 138 mm
Declaration of Performance 001-13

Delivery time on request

65
 Loudspeaker EN 54-24 Ceiling Loudspeaker

582407 Ceilling Speaker DL-E 06-130/T-EN

1
Approval as per EN 54-24, 1438/CPD/0233
This novel EN54-24 certified recessed ceiling loudspeaker for metal ceilings
(RAL 9010) v​ isually blends into the ceiling due to its flat design. The moisture-im-
pregnated 5" broad­band loudspeaker chassis is characterized by high efficiency.
Adaptation to 6 W, 3 W or 1.5 W ​ is implemented in the usual form on the
loudspeaker. The spring-loaded connector (two ​included) guarantees simple,
quick mounting in the ceiling. By default, a plastic protective ​cover is mounted on
the back of the loudspeaker, but a fire dome, which is also EN54-24 ​certified, is
available as well. If the loudspeaker will be used as specified by BS 5839-8, it is ​
also possible to order and install an optional thermal fuse as well as a ceramic
connector ​clamp.

Technical Data
Loading capacity 6 W
Transformer power taps 6/3/1.5 W
Sensitivity EN 54-24, 1 W / 1 m 88.9 dB
Sensitivity EN 54-24, max 1 m 96.7 dB
Transmission range 104 ... 17200 Hz
Dispersion angle 180° (H), 180° (V)
Ambient temperature -10 °C ... 55 °C
Color white, similar to RAL 9010
Weight approx. 0.51 kg
Ceiling opening (Ø min.) 156 mm
Dimensions Ø: 181.5 mm D: 66 mm

Ready-to-install recessed ceiling loudspeaker

Accessories
582407.FD Fire dome (FE 130.1) for recessed ceiling loudspeaker Part No. 582407
581286 Ceramic clip and thermal fuse

582407.SAFE Ceilling Speaker DL-E 06-130/T-EN.SAFE

1
EN54-24 approval pending
This novel EN54-24 certified recessed ceiling loudspeaker for metal ceilings
(RAL 9010) v​ isually blends into the ceiling due to its flat design. The SAFE
variant has a ceramic ​connector clamp and thermal fuse mounted at the factory.
The moisture-impregnated 5" ​broadband loudspeaker chassis is characterized
by high efficiency. Adaptation to 6 W, 3 W o ​ r 1.5 W is implemented in the usual
form on the loudspeaker. The spring-loaded ​connector (two included) guarantees
simple, quick mounting in the ceiling. By default, a ​plastic protective cover is
mounted on the back of the loudspeaker, but a fire dome, which ​is also EN54-24
certified, is available as well. This is also required to mount these SAFE in ​
projects that require use in compliance with BS 5839-8.

Technical Data
Loading capacity 6 W
Transformer power taps 6/3/1.5 W
Sensitivity EN 54-24, 1 W / 1 m 88.9 dB
Sensitivity EN 54-24, max 1 m 96.7 dB
Transmission range 104 ... 17200 Hz
Dispersion angle 180° (H), 180° (V)
Ambient temperature -10 °C ... 55 °C
Color white, similar to RAL 9010
Weight approx. 0.51 kg
Ceiling opening (Ø min.) 156 mm
Dimensions Ø: 181.5 mm D: 66 mm

Accessories
582407.FD Fire dome (FE 130.1)

66 www.hls-austria.com
 Loudspeaker EN 54-24 Ceiling Loudspeaker

582407.FD Firedome for Ceiling Speaker Part No. 582407 1

1
Approval as per EN 54-24, 1438/CPD/0233
Fire dome (FE 130.1) for the 5" recessed ceiling loudspeaker (Part No. 582407) 2
for ​increasing passive safety levels. This fire dome, together with the recessed
ceiling loud­speaker above, is EN54-24 certified. The fire dome prevents chimney
effect drafts through ​suspended ceilings in case of fire, should the speaker
diaphragm burn through. 3

Technical Data
Color black
Weight approx. 0.3 kg 4
Dimensions D: 70 mm

Hot pot is linked to Part No. 582407, 582407.SAFE, certified according to EN 54-24.
5

6
582408 6 W 6.5" ceiling loudspeaker EN 54, metal
1

Approval as per EN 54-24, 1438/CPD/0233

7
With its flat forms, the type DL-E. 06-165/T-EN 54-24 is optically a good fit for the ceilings for which ​
they were designed. The 6.5" broadband loudspeaker chassis, which is impregnated against ​humi-
dity, distinguishes itself by way of its high degree of effectiveness. Typically, the 6 W, 3 W, or ​1.5 W
power setting can be selected. The spring latch (3 pieces) guarantees an uncomplicated ​and quick
mounting onto the ceiling. In the standard version, a protective cover made out of a ​synthetic mate-
rial is mounted to the back side of the loudspeaker, but a fire dome certified ​according to the EN 54
Part 24 standard is optionally available as well. If the loudspeaker is also ​meant to be used in
accordance with BS 5839-8, it is possible to order the optional thermal fuse ​and a ceramic
terminal, and to mount them (also certified in accordance with EN 54-24).
Technical Data
Rated Power 6 W
Transformer power taps 6/3/1.5 W
Sensitivity EN 54-24, 1 W / 1 m 97.8 dB
Sensitivity EN 54-24, max 1 m 105.3 dB
Transmission range 300 ... 19300 Hz (-10 dB)
Dispersion angle 180° @ 1kHz
Ambient temperature -10 °C ... 55 °C
Color white, similar to RAL 9016
Weight approx. 0.68 kg
Cut-out size (Ø min.) 165 mm
Dimensions Ø: 199 mm D: 76 mm
Declaration of Performance 012-13

Accessories
Optional:
582408.FD Fire dome (FE 165.1) for ceiling loudspeaker Part No. 582408, 582408.
SAFE

67
 Loudspeaker EN 54-24 Ceiling Loudspeaker

582408.SAFE 6 W 6.5" ceiling loudspeaker EN 54.SAFE, metal

1

Approval as per EN 54-24, 1438/CPD/0233

With its flat form, these novel type DL-E 06-165/T-EN 54.SAFE is optically a good fit for the ​ceilings
for which they were designed. The SAFE versions are equipped with a premounted ​ceramic
terminal and a thermal fuse. The 6.5" broadband loudspeaker chassis, which is ​impregnated
against humidity, distinguishes itself by way of its high degree of effectiveness. ​Typically, the 6 W, 3
W, or 1.5 W power setting. The spring latch (3 pieces) guarantees ​uncomplicated and quick moun-
ting onto The ceiling. In the standard version, a protective cover ​made out of a synthetic material is
mounted to the back side of the loudspeaker, but a fire dome ​certified according to the EN 54 Part
24 standard is optionally available as well. This is also ​necessary in order to mount this SAFE-type
also in projects which require compliance with BS ​5839-8.

Technical Data
Rated Power 6 W
Transformer power taps 6/3/1.5 W
Sensitivity EN 54-24, 1 W / 1 m 97.8 dB
Sensitivity EN 54-24, max 1 m 105.3 dB
Transmission range 300 ... 19300 Hz (-10 dB)
Dispersion angle 180° @ 1kHz
Ambient temperature -10 °C ... 55 °C
Color white, similar to RAL 9016
Weight approx. 0.68 kg
Cut-out size (Ø min.) 165 mm
Dimensions Ø: 199 mm D: 76 mm
Declaration of Performance 012-13

Accessories
Optional:
582408.FD Fire dome (FE 165.1)

582408.FD Fire dome for ceiling speaker Part No. 582408

Approval as per EN 54-24, 1438/CPD/0233

Fire dome (FE 165.1) for the 6" ceiling loudspeaker (Part No. 582408) for increased passive safety.​
This fire dome, in combination with the aforementioned ceiling loudspeaker, is certified according ​
to EN 54-24. The fire dome prevents the chimney suction effect with hanging ceilings in case of a ​
fire, for instance after the blow-out of the loudspeaker membrane.
Technical Data
Color black
Weight approx. 0.39 kg
Dimensions Ø: 155 mm D: 87 mm
Declaration of Performance 012-13

Hot pot is linked to Part No. 582408, 582408.SAFE, certified according to EN 54-24.

68 www.hls-austria.com
Loudspeaker EN 54-24 Cabinet Loudspeaker

The cabinet loudspeakers are equipped with a broad number of features to match the 1
different applications. Please select your matching loudspeakers from the table.
Model Wall-mounted Ceiling-mounted Ball-proof
582422 X X X 2
582422.10 X – –
582423 X X X
582424 X X X 3
582470 X X X
582426 X X X
582428 X X X
4
582470 6 W 4" cabinet loudspeaker EN 54, metal
1

Approval as per EN 54-24, 0359/CPD/00174 5

The cabinet loudspeaker offers a broad frequency range and a high sound pressure level for an ​
accurate and intelligible transmission of the evacuation messages, including an excellent sound ​
reproduction. It is ideal for an even dispersion of sound in public and commercial buildings. Its low-​ 6
profile, white color design blends easily with most interiors in locations such as hotels, schools, ​
conference rooms, cinemas, amusement parks, factories, and trade fair halls. The driver unit is ​
impregnated against moisture.
This cabinet loudspeaker complies with the BS 5859-8 standards, and is certified according to the ​ 7
EN 54-24 standard.
Technical Data
Rated Power 6 W
Transformer power taps 6 / 3 / 1,5 / 0,75 W
Rated impedance 1,7 / 3,3 / 6,7 kΩ
170 Sensitivity EN 54-24, 1 W / 1 m 91 dB
mm
Sensitivity EN 54-24, max 1 m 99 dB
Transmission range 300 ... 15000 Hz (-10 dB)
Dispersion angle 175° (H), 174° (V) @ 1 kHz
Ambient temperature -25 °C ... 55 °C
63 Storage temperature -40 °C ... 70 °C
170 mm mm Air humidity < 95 %
Material Metal
Color white, similar to RAL 9003
Weight approx. 1.56 kg
Dimensions L: 170 mm W: 170 mm D: 63 mm
Declaration of Performance CPR-DoP-2013002

Delivery time on request

582420 Wall Surface Mount Speaker WA 06-165/T-EN54

1

Approval as per EN 54-24, 1438/CPD/0231

Wall surface mount speaker WA 06-165/T with high-quality 165 mm broadband

loud­speaker chassis with softline design.

The wall surface mount speaker with high density, shock-resistant MDF wood
hausing provides low resonance ​sound. It is very versatile in use, for example for
providing PA services in government build­ings, schools or hospitals. The proven
spring-loaded snap lock on the back panel guaran­tees quick wall mounting.

Technical Data
Loading capacity 6 W
Transformer power taps 6 / 3 / 1,5 W
Sensitivity EN 54-24, 1 W / 1 m 94.6 dB
Sensitivity EN 54-24, max 1 m 102.4 dB
192 Transmission range 197 ... 21.900 Hz
mm Dispersion angle 180° (H), 180° (V)
Ambient temperature -20 °C ... 80 °C
Type of protection IP54
Color white, similar to RAL 9010
82
252 mm mm Weight approx. 1.95 kg
Dimensions W: 252 mm H: 192 mm D: 82 mm

Features
Delivery time on request
• Ball-proof

69
 Loudspeaker EN 54-24 Cabinet Loudspeaker

582420.10 6 W cabinet loudspeaker, wooden, EN 54-24

1

Approval as per EN 54-24, 1438/CPD/0231

Wall surface mount speaker WA 06-165/T with high-quality 165 mm broadband

loud­speaker chassis with softline design.

The wall surface mount speaker with high density, shock-resistant MDF wood
hausing provides low resonance ​sound. It is very versatile in use, for example for
providing PA services in government build­ings, schools or hospitals. The proven
spring-loaded snap lock on the back panel guaran­tees quick wall mounting.
Technical Data
Loading capacity 6 W
Transformer power taps 6 / 3 / 1,5 W
Sensitivity EN 54-24, 1 W / 1 m 94.6 dB
Sensitivity EN 54-24, max 1 m 102.4 dB
192 Transmission range 17 ... 21.900 Hz
mm Dispersion angle 180° (H), 180° (V)
Ambient temperature -20 °C ... 80 °C
Type of protection IP54
Color white, similar to RAL 9010
82
252 mm mm Weight approx. 1.95 kg
Dimensions W: 252 mm H: 192 mm D: 82 mm

Delivery time on request

582421 Wall Surface mount Speaker WA 06-165/T Metal-EN54

1

Approval as per EN 54-24, 1438/CPD/0231

WA-06-165/T metal EN 54 is a vandal-proof wall-mounted loudspeaker designed

entirely in ​metal with a maximum power of 6 W. It can be modified to 3 W or 1.5
W if required. Very ​good speech intelligibility is ensured by the 165 mm broad-
band chassis. The corrosion-​resistant powder-coating (RAL 9010) ensures
durable protection against environmental ​influences. The loudspeaker is
equipped with an integrated ceramic clamp and thermal ​fuse. In addition, the
loudspeaker chassis's are protected against the action of moisture.
Technical Data
Loading capacity 6 W
Transformer power taps 6 / 3 / 1,5 W
Sensitivity EN 54-24, 1 W / 1 m 94.6 dB
Sensitivity EN 54-24, max 1 m 102.4 dB
192 Transmission range 170 ... 18.500 Hz
mm Dispersion angle 180° (H), 180° (V)
Ambient temperature -20 °C ... 80 °C
Color white, similar to RAL 9010
Weight approx. 2.04 kg
80 Dimensions W: 257 mm H: 192 mm D: 80 mm
257 mm mm

Delivery time on request

70 www.hls-austria.com
Loudspeaker EN 54-24 Cabinet Loudspeaker

582422 2 x 6 W, 2 x 4" AB cabinet loudspeaker EN 54, MDF 1

1

Approval as per EN 54-24, 1438/CPD/0230

The A/B line cabinet loudspeaker for voice alarm systems is certified in accordance with EN 54-24 ​ 2
and offers maximum safety for voice alarm projects.
The WA-AB 06-100/T-EN 54 V features two mutually independent chassis and two 100 V output ​
transformers. It allows for cost-effective supply via two separate (A/B) lines. In the event of a failure ​ 3
of one line, the loudspeaker redundancy allows continued allert of the respective area. For every ​
installation position, the presence of an A line as well as of a B line provides redundancy. The high ​
density MDF wood enclosure (in white) ensures low-resonance sound quality. This version is ball ​
impact resistant and suitable for wall or ceiling mounting. The IP 54 rating guarantees operational ​ 4
safety even under harsh environmental conditions. Both A/B-line loudspeakers respectively feature ​
2 integrated ceramic terminals and 2 thermal fuses. The chassis are impregnated against ​moisture.

Technical Data
5
Rated Power 12 W
Transformer power taps 2 x 6 / 3 / 1,5 W
Sensitivity EN 54-24, 1 W / 1 m 89.5 dB
Sensitivity EN 54 (double) 92.6 dB 6
Sensitivity EN 54-24 max (double) 100.1 dB
Sensitivity EN 54-24, max 1 m 97 dB
Transmission range 227 ... 14600 Hz (-10 dB)
Dispersion angle 180° (H), 160° (V) @ 1 kHz
Features Ambient temperature -20 °C ... 80 °C 7
Type of protection IP 54 (zertifiziert)
• Ball-proof Color white, similar to RAL 9010
Weight approx. 2.3 kg
Dimensions W: 254 mm H: 195 mm D: 81 mm
Declaration of Performance 008-13

Delivery time on request

582422.10 2 x 6 W, 2 x 4" AB cabinet loudspeaker EN 54, MDF

1

Authorized in compliance with EN 54-24, 1438/CPD/0230

The A/B line cabinet loudspeaker for speech alarm systems is certified in accordance with EN 54-​
24 and offers maximum safety for speech alarm projects.
The WA-AB 06-100/T-EN 54 V features two mutually independent chassis and two 100 V output ​
transformers. It allows for cost-effective supply via two separate (A/B) lines. In the event of a failure ​
of one line, the loudspeaker redundancy allows continued acoustic irradiation of the respective ​
area. For every installation position, the presence of an A line as well as of a B line provides ​redun-
dancy. The high density MDF wood enclosure (in white) ensures low-resonance sound ​quality. This
version is exclusively intended for wall mounting. The IP 54 product standard ​guarantees operati-
onal safety even under harsh environmental conditions. Both A/B-line ​loudspeakers respectively
feature 2 integrated ceramic terminals and 2 thermal fuses. The chassis ​are impregnated against
moisture.
Technical Data
Rated Power 12 W
Transformer power taps 2 x 6 / 3 / 1,5 W
Sensitivity EN 54-24, 1 W / 1 m 89.5 dB
Sensitivity EN 54 (double) 92.6 dB
Sensitivity EN 54-24 max (double) 100.1 dB
Sensitivity EN 54-24, max 1 m 97 dB
Transmission range 227 ... 14600 Hz (-10 dB)
Dispersion angle 180° (H), 160° (V) @ 1 kHz
Ambient temperature -20 °C ... 80 °C
Type of protection IP 54 (zertifiziert)
Color white, similar to RAL 9010
Weight approx. 2.3 kg
Dimensions W: 254 mm H: 195 mm D: 81 mm
Declaration of Performance 008-13

Delivery time on request

71
 Loudspeaker EN 54-24 Cabinet Loudspeaker

582425 6 W 6.5" flush-mounted wall loudspeaker EN 54

1

Approval as per EN 54-24, 1438/CPD/0230

The white WU 06-165/T EN 54-24 was specifically developed for flush mount-installations. The ​
stable rectangular in-wall loudspeaker with its stable sheet steel perforated grid cover also stands ​
out due to its discrete softline appearance. It has a maximum output of 6 W, and can be adjusted ​
to 3 W or 1.5 W, if necessary. Balanced sound dynamics are provided by a high-grade 165 mm ​
broadband loudspeaker chassis. The loudspeaker is protected against dust and other forms of ​
environmental impact by way of a synthetic shock-resistant ABS-flush mount enclosure in black. ​
The loudspeaker features an integrated ceramic terminal block and a thermal fuse. Moreover, the ​
loudspeaker chassis is impregnated against moisture.
Technical Data
Rated Power 6 W
Transformer power taps 6 / 3 / 1,5 W
Sensitivity EN 54-24, 1 W / 1 m 91.6 dB
195 Sensitivity EN 54-24, max 1 m 99.1 dB
mm
Transmission range 93 ... 23500 Hz (-10 dB)
Dispersion angle 180° (H), 170° (V) @ 1 kHz
Ambient temperature -20 °C ... 80 °C
Color white, similar to RAL 9010
88
Weight approx. 1.4 kg
255 mm Dimensions W: 255 mm H: 195 mm D: 88 mm
mm
Declaration of Performance 009-13

Delivery time on request

582423 10 W 6.5" round wall or ceiling surface mount loudspeaker, metal

1

Approval as per EN 54-24, 1438/CPD/0232

The loudspeaker DL-A 10-165/T-EN 54 for voice alarm made of powder-coated metal in white with ​
high degree of efficiency and a high-quality 200 mm broadband loudspeaker chassis. DL-A 10-165/​
T-EN 54 can be installed on ceiling and walls, where recessed mounting is not possible. Flat and ​
elegant design for unobtrusive installations provided with a metal back plate. The loudspeaker is ​
equipped for highest security requirements with a ceramic terminal and a thermal fuse. The ​
Chassis is protected against moisture by impregnation. The DL-A 10-165/T EN 54 offers a powerful​
sound besides the high safety standard.
Technical Data
Rated Power 10 W
Transformer power taps 10 / 6 / 3 / 1,5 W
Sensitivity EN 54-24, 1 W / 1 m 90.7 dB
Sensitivity EN 54-24, max 1 m 100.7 dB
170 Transmission range 290 ... 23400 Hz (-10 dB)
mm Dispersion angle 180° @ 1 kHz
Ambient temperature -20 °C ... 80 °C
Color white, similar to RAL 9010
Weight approx. 1.3 kg
Dimensions Ø: 170 mm D: 75 mm
75
mm
Declaration of Performance 004-13

Delivery time on request

72 www.hls-austria.com
 Loudspeaker EN 54-24 Cabinet Loudspeaker

582424 10 W 8" round wall or ceiling surface mount loudspeaker, metal 1

1

Approval as per EN 54-24, 1438/CPD/0232

The loudspeaker DL-A 10-200/T-EN 54 for voice alarm made of powder-coated metal in white with ​ 2
high degree of efficiency and a high-quality 200 mm broadband loudspeaker chassis.
The DL-A 10-200/T EN 54 can be mounted onto ceilings and walls when recessed mounting is not ​
possible. Flat and elegant design for unobtrusive installations provided with a metal back plate. ​
The loudspeaker features a ceramic terminal and a thermal fuse in order to meet the highest safety ​ 3
requirements. The chassis is impregnated against moisture. Apart from a very high safety ​stan-
dard, the DL-A 10-200/T EN 54-24 also features a powerful sound.
Technical Data 4
Rated Power 10 W
Transformer power taps 10 / 6 / 3 / 1,5 W
Sensitivity EN 54-24, 1 W / 1 m 92.5 dB
Sensitivity EN 54-24, max 1 m 102 dB
210
mm Transmission range 275 ... 19100 Hz (-10 dB) 5
Dispersion angle 180° @ 1 kHz
Ambient temperature -20 °C ... 80 °C
Color white, similar to RAL 9010
Weight approx. 1.69 kg
Dimensions Ø: 208 mm D: 89.5 mm 6
90
mm
Declaration of Performance 004-13

Delivery time on request

7

73
 Loudspeaker EN 54-24 Horn Loudspeaker

582479 15 W horn loudspeaker EN 54, ABS

1

Approval as per EN 54-24, 0359/CPD/00456

The horn loudspeaker offers a high sound pressure and long-lasting weather resistance, ideal for ​
use in industrial projects. The IP 66 high protection class guarantees operational safety even under ​
the most difficult conditions. The loudspeaker is also equipped with a ceramic terminal block and a ​
thermal fuse for increased safety. The shock-resistant ABS enclosure according to UL94V0 ​
ensures long-lasting stability. A U-shaped non-corrosive universal bracket is enclosed for flexible ​
mounting. The cable connection is done without need for an additional junction box. The flexible ​
power adjustment can be easily done with the rotary switch on the back side of the loudspeaker. ​
The loudspeaker is also suitable for outdoors use. The loudspeaker complies with standard BS ​
5859 Part 8, and is certified in accordance with EN 54 Part 24.
Technical Data
213
Rated Power 15 W
mm Transformer power taps 15 / 10 / 5 W
Rated impedance 0.667 / 1 / 2 kΩ
Sensitivity EN 54-24, 1 W / 1 m 105 dB
Sensitivity EN 54-24, max 1 m 117 dB
Transmission range 300 ... 16000 Hz (-10 dB)
265 Dispersion angle 124° (H) / 143° (V) @ 1 kHz
mm Ambient temperature -25 °C ... 55 °C
Storage temperature -40 °C ... 70 °C
Type of protection IP 66
Material ABS
Color light grey, similar to RAL 7035
Weight approx. 2.05 kg
Dimensions Ø: 213 mm D: 265 mm
Declaration of Performance CPR-DoP-2014005

582430 Horn Loudspeaker DK 10/T EN54

1

Approval as per EN 54-24, 1438/CPD/00242

The horn loudspeaker, DK 10/T-EN54, certified as per EN54-24, offers high
acoustic pres­sure and durable weather resistance, ideal for industrial use. The
high protection class ​IP66 ensures operational safety even under very difficult
conditions. For more safety, the l​oudspeaker is additionally equipped with a
ceramic clamp and thermal fuse. The impact-​resistant ABS body as per UL94V0
ensures durable stability. Delivered along with a U-​shaped, universal rust-free
bracket for flexible assembly. The flexible power modification ​can easily be done
on the back of the loudspeaker, 10 W, 5 W, 2.5 W, 1.25 W. The DK 10/ ​T-EN54 is
also suitable for use in outdoor areas.

Technical Data
Loading capacity 10 W
141,5 Transformer power taps 10 5/2.5/1.25 W (20)
mm
Sensitivity EN 54-24, 1 W / 1 m 98 dB
Sensitivity EN 54-24, max 1 m 108 dB
Transmission range 569 ... 7.000 Hz
Dispersion angle 140° (H), 140° (V)
207,5 128 Ambient temperature -20 °C ... 90 °C
mm mm Type of protection IP66
Color gray, similar to RAL 7035
Weight approx. 1.81 kg
Dimensions Ø: 142 mm D: 210 mm

Delivery time on request

74 www.hls-austria.com
 Loudspeaker EN 54-24 Horn Loudspeaker

582431 Horn Loudspeaker DK 15/T EN54 1

1

Approval as per EN 54-24, 1438/CPD/0242

The horn loudspeaker, DK 15/T-EN54, certified as per EN54-24, offers high 2
acoustic pres­sure and durable weather resistance, ideal for industrial use. The
high protection class ​IP66 ensures operational safety even under very difficult
conditions. For more safety, the l​oudspeaker is additionally equipped with a
ceramic clamp and thermal fuse. The impact-​resistant ABS body as per UL94V0 3
ensures durable stability. Delivered along with a U-​shaped, universal rust-free
bracket for flexible assembly. The flexible power modification ​can easily be done
on the back of the loudspeaker, 15 W, 7.5 W, 3.75 W, 1.87 W. The DK 1 ​ 5/T-EN54 4
is also suitable for use in outdoor areas.

Technical Data
Loading capacity 15 W 5
Transformer power taps 15/7.5/3.75/1.87 W (20)
Sensitivity EN 54-24, 1 W / 1 m 100.5 dB
Sensitivity EN 54-24, max 1 m 112.3 dB
Transmission range 677 ... 5.400 Hz
Dispersion angle 110° (H), 110° (V) 6
Ambient temperature -20 °C ... 90 °C
Type of protection IP66
Color gray, similar to RAL 7035
Weight approx. 2.1 kg 7
Dimensions Ø: 209 mm D: 273 mm

Delivery time on request

582432 30 W horn loudspeaker EN 54, ABS

1

Approval as per EN 54-24, 1438/CPD/0242

The horn loudspeaker DK 30/T-EN 54 certified in accordance to EN 54-24 offers a high sound ​
pressure and weather resistance, ideal for industrial use. The high protection class IP 66 ​guaran-
tees operating reliability even under difficult environmental conditions. For increased ​protection, the
loudspeaker is equipped with built in ceramic terminal and a thermal fuse. The i​mpact resistant
ABS housing following UL94V0 guarantees long lasting stability. A U shaped, ​stainless universal
holder is included for a flexible mounting. The flexible power adjustment can be ​easily done on the
back side of the loudspeaker, 30 W, 20 W, 10 W, 5 W. The DK 30/T-EN 54 is ​also suitable for using
in outdoor areas.
Technical Data
Rated Power 30 W
Transformer power taps 30 / 20 / 10 / 5 W
Sensitivity EN 54-24, 1 W / 1 m 91.9 dB
Sensitivity EN 54-24, max 1 m 124 dB
Transmission range 592 ... 6900 Hz (-10 dB)
Dispersion angle 110° @ 1 kHz
Ambient temperature -20 °C ... 90 °C
Type of protection IP 66 (zertifiziert)
Color gray, similar to RAL 7035
Weight approx. 2.3 kg
Dimensions Ø: 235 mm D: 303 mm
Declaration of Performance 003-13

Incl. premounted 1.0 m cable and an IP 65 distribution box

Delivery time on request

75
 Loudspeaker EN 54-24 Horn Loudspeaker

582433 30 W 2-way horn loudspeaker EN 54, ABS

1

Approval as per EN 54-24, 1438/CPD/0242

The 2-way music horn DK-MH 30/T plus-EN 54 with impact-resistant ABS housing in light gray ​
(similar to RAL 7035) and protection class IP 66, complements the series of horn loudspeaker for ​
voice alarm. For more safety, it is also equipped with ceramic terminal and thermal fuse. An e​ nor-
mous sound pressure and a convincing music quality, likewise as simple and flexible ​installation
with stainless aluminum universal mount. The flexible power adjustment can be easily ​done on the
back side of the loudspeaker, 30 W, 15 W, 7,5 W, 3,75 W. The DK MH30/T plus-EN 54 ​is also
suitable for using in outdoor areas.
Technical Data
370 mm Rated Power 30 W
Transformer power taps 30 / 15 / 7,5 / 3,75 W
Sensitivity EN 54-24, 1 W / 1 m 90.4 dB
255 Sensitivity EN 54-24, max 1 m 104.8 dB
mm Transmission range 237 ... 21100 Hz (-10 dB)
Dispersion angle 60° (H), 99° (V) @ 1 kHz
Ambient temperature -20 °C ... 90 °C
Color white, similar to RAL 9010
Weight approx. 4.5 kg
291 120 Dimensions W: 370 mm H: 255 mm D: 291 mm
mm mm Declaration of Performance 003-13

Delivery time on request

76 www.hls-austria.com
Loudspeaker EN 54-24 Sound Projector

582473 10 W unidirectional sound projector EN 54, metal 1

1

Approval as per EN 54-24, 0359/CPD/0172

This unidirectional 10 W sound projector features a broad frequency response and a high degree ​ 2
of efficiency. Its IP 65 protection class guarantees universal applicability indoors as well as ​
outdoors.
Its modern design and its excellent sound quality make this sound projector eminently suitable for ​
use in hotels, shopping malls, airports, railway platforms, etc. 3
The mounted thermal fuse as well as the ceramic terminal enable application in compliance with ​
BS5839 Part 8.
Technical Data 4
Rated Power 10 W
Transformer power taps 10 / 5 / 2,5 / 1,25 W
Sensitivity EN 54-24, 1 W / 1 m 89 dB
Sensitivity EN 54-24, max 1 m 99 dB
Transmission range 150 ... 20000 Hz (-10 dB) 5
Dispersion angle 214° (H), 219° (V) @ 1 kHz
Ambient temperature -25 °C ... 55 °C
Type of protection IP 65
Color white, similar to RAL 9003
140 195
Weight approx. 2.62 kg 6
mm mm Dimensions Ø: 140 mm D: 195 mm
Declaration of Performance CPR-DoP-2014002

Pre-mounted fire-resistant, 6-core connection cable, length 0.90 m 7

Including bracket and mounted at housing (please mounted at housing instructions)!
Delivery time on request

582474 20 W unidirectional sound projector EN 54, metal

1

Approval as per EN 54-24, 0359/CPD/0172

This unidirectional 20 W sound projector features a broad frequency response and a high degree ​
of efficiency. Its IP 65 protection class guarantees universal applicability indoors as well as ​
outdoors.
Its modern design and its excellent sound quality make this sound projector eminently suitable for ​
use in hotels, shopping malls, airports, railway platforms, etc.
The mounted thermal fuse as well as the ceramic terminal enable application in compliance with ​
BS5839 Part 8.
Technical Data
Rated Power 20 W
Transformer power taps 20 / 10 / 5 / 2,5 W
Sensitivity EN 54-24, 1 W / 1 m 89 dB
Sensitivity EN 54-24, max 1 m 102.5 dB
Transmission range 150 ... 20000 Hz (-10 dB)
Dispersion angle 214° (H), 219° (V) @ 1 kHz
Ambient temperature -25 °C ... 55 °C
Type of protection IP 65
Color white, similar to RAL 9003
140 195
Weight approx. 2.65 kg
mm mm Dimensions Ø: 140 mm D: 195 mm
Declaration of Performance CPR-DoP-2014002

Pre-mounted fire-resistant, 6-core connection cable, length 0.90 m

Including bracket mounted at housing (please refer to the installation instructions)!
Delivery time on request

77
 Loudspeaker EN 54-24 Sound Projector

582475 20 W bidirectional sound projector EN 54, metal

1

Approval as per EN 54-24, 0359/CPD/0172

This bidirectional 20 W sound projector features a broad frequency response and a high degree of ​
efficiency. Its IP 65 protection class guarantees universal applicability indoors as well as outdoors.
Its modern design and its excellent sound quality make this sound projector eminently suitable for ​
use in hotels, shopping malls, airports, railway platforms, etc.
The mounted thermal fuse as well as the ceramic terminal enable application in compliance with ​
BS5839 Part 8.
Technical Data
Rated Power 20 W
Transformer power taps 20 / 10 / 5 / 2,5 W
Sensitivity EN 54-24, 1 W / 1 m 87 dB
Sensitivity EN 54-24, max 1 m 100 dB
Transmission range 150 ... 20000 Hz (-10 dB)
Dispersion angle 214° (H), 219° (V) @ 1 kHz
Ambient temperature -25 °C ... 55 °C
Type of protection IP 65
Color white, similar to RAL 9003
Weight approx. 3.23 kg
Dimensions Ø: 140 mm D: 195 mm
140 195 Declaration of Performance CPR-DoP-2014002
mm mm

Pre-mounted fire-resistant, 6-core connection cable, length 0.90 m

Including bracket mounted at housing (please refer to installation instructions)!
Delivery time on request

582441 Sound Projector DA-S 20-130/T EN54

1

Approval as per EN 54-24, 1438/CPD/0234

The DA-S 20-130/T-EN54 sound projector with a 130-mm broadband loudspe-
aker chassis ​has high stability, is high-performance and certified as per EN54-24.
Due to its good s​ peech intelligibility, this sound projector is especially suitable for
applications in corridors ​and work floors. Equipped with ceramic clamps and
thermal fuse, the sound projectors ​meet the highest safety requirements. The
sound projector has a maximum power of 20 W ​and can also be modified to 15
W, 10 W and 5 W. The chassis's of the sound projectors are ​best protected
against humidity due to their special construction choice of material and ​produc-
tion details. The DA-S sound projector with IP65 are completely made of robust ​
aluminum and additionally plastic-coated with RAL 9010. Corrosion can thus not
occur. O
​ ptionally, you can get a mast bracket (Part No. 581281) for the DA-S
20-130/T-EN54 for a m ​ ast diameter of about 200 mm.

Technical Data
Loading capacity 20 W
Transformer power taps 20 / 15 / 10 / 5 W
Sensitivity EN 54-24, 1 W / 1 m 92.1 dB
Sensitivity EN 54-24, max 1 m 105.4 dB
Transmission range 800 ... 16.700 Hz
Dispersion angle 360° (H), 360° (V)
Ambient temperature -20 °C ... 90 °C
Type of protection IP65
Color white, similar to RAL 9010
Weight approx. 2.52 kg
Dimensions Ø: 150 mm D: 183 mm
CE certificate 1438-CPD-0234

78 www.hls-austria.com
Loudspeaker EN 54-24 Spherical Loudspeaker

582460 16 W spherical speaker EN 54, ABS 1

1

Approval as per EN 54-24, 1438/CPD/0325

The compact DL-K 16-130/T-EN 54 is equipped with a corrosion-resistant 130 mm full range ​ 2
speaker chassis with ceramic terminal and thermal fuse. The 16 W high ball speaker certified to ​
EN 54-24 with ABS housing (UL94 HB) offers a high sound pressure level and a balanced ​
frequency response.
3
Technical Data
Rated Power 16 W
Transformer power taps 16 / 8 / 4 W
Sensitivity EN 54-24, 1 W / 1 m 85 dB
Sensitivity EN 54-24, max 1 m 97 dB 4
Transmission range 130 ... 13300 Hz (-10 dB)
Dispersion angle 196° @ 1kHz
Ambient temperature -20 °C ... 80 °C
Type of protection IP 35
Color white, similar to RAL 9010 5
Weight approx. 1.5 kg
Dimensions Ø: 185 mm D: 157 mm
Declaration of Performance 005-13

Pre-mounted, 5-core connection cable, length 4,50 m

6
Including canopy
Delivery time on request.
7

582461 20 W spherical speaker EN 54, ABS

1

Approval as per EN 54-24, 1438/CPD/0325

The DL-54 K 20-165/T-EN with an impact-resistant, UV-resistant ABS-housing in white (UL94 V0) ​
features a corrosion-resistant 165-mm broadband loudspeaker chassis with ceramic terminal and ​
thermal fuse. The spherical loudspeaker certified according to EN 54-24 meets the highest safety ​
requirements of IP 35 (IEC 529). The power setting of DL-K 20-165 / T can be easily adjusted by ​
turning the screw at the top of the ball. The low-resistance mode is also possible.
Technical Data
Rated Power 20 W
Transformer power taps 20 / 10 / 5 / 2,5 W
Sensitivity EN 54-24, 1 W / 1 m 91.5 dB
Sensitivity EN 54-24, max 1 m 104.5 dB
Transmission range 128 ... 17900 Hz (-10 dB)
Dispersion angle 163° @ 1 kHz
Ambient temperature -20 °C ... 80 °C
Type of protection IP 35
Color white, similar to RAL 9010
Weight approx. 2.2 kg
Dimensions Ø: 260 mm D: 245 mm
Declaration of Performance 005-13

Pre-mounted, 5-core connection cable, length 4,50 m

Including canopy
Delivery time on request

79
 Loudspeaker EN 54-24 Column Loudspeaker

582476 20 W column loudspeaker EN 54, metal

1

Approval as per EN 54-24, 0359/CPD/00456

The 20 W column loudspeaker has a broad frequency range and a high sound pressure level. This ​
guarantees an accurate and intelligible transmission of the evacuation message, as well as ​excel-
lent sound reproduction. It can be used indoors as well as outdoors, in dry as well as in humid ​
surroundings. Due to its flat design and the white coating, the loudspeaker can be easily integrated ​
in hotels, conference rooms, cinemas, factories, trade fair halls and other buildings. The l​oudspe-
aker complies with standard BS 5859 Part 8, and is certified in accordance with EN 54 Part ​24.

Technical Data
165 150 Rated Power 20 W
mm mm
Transformer power taps 20 / 10 / 5 / 2.5 W
Rated impedance 0,5 / 1 / 2 / 4 kΩ
82 x 52 mm Sensitivity EN 54-24, 1 W / 1 m 91 dB
Sensitivity EN 54-24, max 1 m 104 dB
344 Transmission range 300 ... 15000 Hz (-10 dB)
mm Dispersion angle 146° (H) / 87° (V) @ 1 kHz
Ambient temperature -25 °C ... 55 °C
Storage temperature -40 °C ... 70 °C
Air humidity < 95 %
Type of protection IP 66
296 mm Material Aluminum
Color white, similar to RAL 9003
Weight approx. 3.75 kg
Dimensions W: 165 mm H: 344 mm D: 150 mm
Declaration of Performance CPR-DoP-2014003

Wall mount included

Delivery time on request.

582477 40 W column oudspeaker EN 54, metal

1

Approval as per EN 54-24, 0359/CPD/00455

The 40 W column loudspeaker has a broad frequency range and a high acoustic pressure level. ​
This guarantees an accurate and intelligible transmission of the evacuation message, as well as ​
excellent sound reproduction. It can be used indoors as well as outdoors, in dry as well as in humid ​
surroundings. Due to its flat design and the white coating, the loudspeaker can be easily integrated ​
in hotels, conference rooms, cinemas, factories, trade fair halls and other buildings. The l​oudspe-
aker complies with standard BS 5859 Part 8, and is certified in accordance with EN 54 Part ​24.

165 150 Technical Data

mm mm Rated Power 40 W
Transformer power taps 40 / 20 / 10 / 5 W
Rated impedance 0,25 / 0,5 / 1 / 2 kΩ
82 x 52 mm Sensitivity EN 54-24, 1 W / 1 m 94 dB
Sensitivity EN 54-24, max 1 m 110 dB
568 Transmission range 300 ... 15000 Hz (-10 dB)
mm Dispersion angle 147° (H) / 48° (V) @ 1 kHz
Ambient temperature -25 °C ... 55 °C
Storage temperature -40 °C ... 70 °C
Air humidity < 95 %
296 mm Type of protection IP 66
Material Aluminum
Color white, similar to RAL 9003
Weight approx. 5.75 kg
Dimensions W: 165 mm H: 568 mm D: 150 mm
Declaration of Performance CPR-DoP-2014003

Wall mount included

Delivery time on request.

80 www.hls-austria.com
 1

Standard Loudspeaker Ceiling Loudspeaker 82

Wall Surface Mounted Loudspeaker 83-84
Sound Projector 85
Spherical Loudspeaker 85
Horn Loudspeaker 86
Music Cabinet Loudspeaker 87
Accessories 87

81
 Standard Loudspeaker Ceiling Loudspeaker

581263 6 W 5'' ceiling loudspeaker, metal

1

The cost-effective ceiling loudspeaker features an excellent sound reproduction and an esthetically ​
appealing design. It is versatile and distinguishes itself by its high sound pressure and its broad ​
frequency range. It features 6 W Dual Cone driver unit and a back-mounted 100 V transformer. ​
The loudspeaker is CE and RoHS compliant.
Technical Data
Rated Power 6 W
Transformer power taps 6 / 3 / 1,5 W
Rated impedance 1,7 / 3,3 / 6,7 kΩ
SPL 1 W / 1 m 90 dB
Transmission range 120 ... 20000 Hz (-10 dB)
Dispersion angle 160°
Ambient temperature -25 °C ... 55 °C
Storage temperature -40 °C ... 70 °C
Air humidity < 95 %
180
mm Material Metal
Color white, similar to RAL 9003
Weight approx. 0.71 kg
Cut-out size (Ø min.) 150 mm
Dimensions Ø: 180 mm D: 55 mm

55 mm Delivery time on request.

581254 Ceiling Loudspeaker EDL 06-165/T

1

The metal bayonet recessed ceiling loudspeaker with a 165 mm broadband

loudspeaker ​chassis and high efficacy offers excellent sound for all applications.
Spring-loaded snap ​lock with cranked leg spring, clamping strength and shorter
tension interval facilitate fast ​and simple mounting. Flush installation is thus
possible with suspended ceilings.

Technical Data
Loading capacity 6 W
Transformer power taps 6 / 3 / 1,5 W
SPL Pmax / 1 m 110.8 dB
SPL 1 W / 1 m 103 dB
Transmission range 97 ... 20.000 Hz
Dispersion angle 180°
Color white, similar to RAL 9010
220 168 Weight approx. 1.3 kg
mm mm Dimensions Ø: 220 mm D: 100 mm
73
mm Accessories
581255 Fire dome (EF 165) for recessed ceiling loudspeakers Part No. 581254
197
100 mm
mm 70 mm 90 mm
33 mm

82 www.hls-austria.com
Standard Loudspeaker Wall Surface Mounted Speaker

581270 6 W cabinet loudspeaker, ABS 1

1

The loudspeaker has a shallow installation height. Its elegant design makes it suited for ​applica-
tions in various environments, such as shopping centers, education institutions, office ​buildings,
hotels, and restaurants.
2
The loudspeaker features a high-grade loudspeaker chassis, which provides an extraordinary ​
audio output and guarantees long-term durability. The quick and simple installation saves time and ​
costs. The loudspeaker is CE and RoHS compliant. 3
Technical Data
Rated Power 6 W
Transformer power taps 6/3W
Rated impedance 1,7 / 3,3 kΩ 4
SPL 1 W / 1 m 90 dB
Transmission range 200 ... 20000 Hz (-10 dB)
Dispersion angle 120°
Ambient temperature -25 °C ... 55 °C
162
Storage temperature -40 °C ... 70 °C 5
mm Air humidity < 95 %
Material ABS
Color white, similar to RAL 9010
Weight approx. 1 kg
260 mm
77
mm
Dimensions W: 260 mm H: 162 mm D: 77 mm 6
Delivery time on request.

7
581276 10 W cabinet loudspeaker, ABS
1

The Cabinet loudspeaker is suitable for various applications, such as shopping centers, ​supermar-
kets, educational institutions, office buildings, hotels, and restaurants. It stands out due to ​its high
sound pressure and its wide frequency rang, and offers excellent voice and music ​reproduction.
Available output settings are 5 W and 10 W. A spring terminal on the back side ​makes cable
connection easier. The elegant design in shock-resistant ABS material is kept in ​discrete white.
The loudspeaker features an extraordinary bass response.
The loudspeaker is CE and RoHS compliant.
Technical Data
Rated Power 10 W
Transformer power taps 10 / 5 W
Rated impedance 1 / 2 kΩ
SPL 1 W / 1 m 92 dB
Transmission range 150 ... 17000 Hz (-10 dB)
Dispersion angle 170°
345 Ambient temperature -25 °C ... 55 °C
mm 100 Storage temperature -40 °C ... 70 °C
mm Air humidity < 95 %
Material ABS
Color white, similar to RAL 9003
Weight approx. 1.6 kg
Dimensions W: 345 mm H: 240 mm D: 100 mm
240 mm
Delivery time on request.

581277 40 W cabinet loudspeaker, ABS

1

The Cabinet loudspeaker is very well capable of reproducing background music. Spring clips on ​
the back side make a simple installation possible. The loudspeaker is ideal for use in bars, ​restau-
rants, shopping centers, video stores, conference rooms, office buildings, trade fair halls, ​gyms,
presentation rooms, etc. The adjustable brackets allow for the flexible positioning of the ​loudspe-
aker.
The loudspeaker is CE and RoHS compliant.
Technical Data
Rated Power 40 W
Transformer power taps 40 / 20 / 10 W
Rated impedance 0,25 / 0,5 / 1 kΩ
SPL 1 W / 1 m 84 dB
Transmission range 100 ... 20000 Hz (-10 dB)
Dispersion angle 160°
Ambient temperature -25 °C ... 55 °C
165 Storage temperature -40 °C ... 70 °C
mm 302 Air humidity < 95 %
mm Material ABS
Color white, similar to RAL 9003
Weight approx. 3.2 kg
Dimensions W: 302 mm H: 172 mm D: 165 mm
172 mm
Delivery time on request.

83
 Standard Loudspeaker Wall Surface Mounted Speaker

581228 Wall surface mount speaker i Speak 6

1

Plastic wall speaker with integrated 100 V transformer. The loudspeaker is desi-
gned to be ​easily mounted on any flat surface.

Technical Data
Loading capacity 6 W
Transformer power taps 6W-3W
SPL Pmax / 1 m 99 dB
SPL 1 W / 1 m 92 dB
Transmission range 130 ... 17000 Hz
Dispersion angle 180° (H) x 140° (V)
Material ABS plastic housing / steel
Color white, similar to RAL 9018
Weight approx. 1 kg
Dimensions W: 166 mm H: 267 mm D: 80 mm

581252 Wall Surface Mount Speaker EWA06-165/T, white

1

Wall surface-mount speaker EWA 06-165/T with high-quality 165 mm broadband

loud­speaker chassis with softline design.

The wall surface-mount speaker with high density MDF wood casing for low
resonance ​sound is very versatile in use, for example for providing PA services in
government build­ings, schools or hospitals. The proven spring-loaded snap lock
on the back panel guaran­tees quick wall mounting.

Technical Data
Loading capacity 6 W
Transformer power taps 6 / 3 / 1,5 W
SPL Pmax / 1 m 106.4 dB
SPL 1 W / 1 m 98.6 dB
Transmission range 197 ... 21.900 Hz
Dispersion angle 180°
Color white, similar to RAL 9010
Weight approx. 1.7 kg
Dimensions W: 254 mm H: 195 mm D: 81 mm

581257 Wall/Ceiling Loudspeaker Round EDL A 10-165/T

1

Surface mount loudspeaker made of powder-coated metal in white with high effi-
cacy and a ​high-quality 165 mm broad band loudspeaker chassis.

The EDL-A 10-165/T can be installed on ceilings and walls where flush mounting
is not ​possible. Flat and elegant design for unobtrusive installations which can be
realized without ​bothersome “extruding lips” thanks to the hidden mounting
bracket.

Technical Data
Loading capacity 10 W
Transformer power taps 10 / 6 / 3 / 1,5 W
SPL Pmax / 1 m 112.2 dB
SPL 1 W / 1 m 102.2 dB
Transmission range 290 ... 23.400 Hz
Dispersion angle 180°
170
Color white, similar to RAL 9010
mm Weight approx. 1.23 kg
Dimensions Ø: 170 mm D: 75 mm

Delivery time on request

75
mm

Features

• Vandal-proof

84 www.hls-austria.com
Standard Loudspeaker

Sound Projector 1

581258 20 W unidirectional sound projector, ABS 2

1

Due to its high-quality ABS enclosure and its special mechanical design, this sound projector can ​
be used in places where air humidity and temperatures are high. With its broad frequency range ​
and high sound pressure level, this loudspeaker is eminently suitable for use in train stations, ​ 3
shopping centers, warehouses, etc.
The sound projector is CE and RoHS compliant.
Technical Data 4
Rated Power 20 W
Transformer power taps 20 / 10 / 5 W
SPL 1 W / 1 m 92 dB
Transmission range 140 ... 20000 Hz (-10 dB)
Dispersion angle 150° 5
Ambient temperature -20 °C ... 90 °C
Storage temperature -40 °C ... 70 °C
Type of protection IP 55
Color white, similar to RAL 9003
Weight approx. 1.56 kg 6
Dimensions Ø: 138 mm D: 201 mm

Delivery time on request.

158 195
7
mm mm

Spherical Loudspeaker

581215 20 W spherical loudspeaker, metal

1

Spherical loudspeaker with real surround sound. A 360° horizontal and 160° vertical sound ​emis-
sion results in almost total coverage. Excellent emission, a steady frequency response and ​good
efficiency make this loudspeaker the answer to many acoustics problems.

Ideal for fitting large areas for sound, such as warehouses, entrance halls or factories. Can be ​
used for both voice as well as music.
Technical Data
Rated Power 20 W
Transformer power taps 20 / 10 / 5 W
SPL 1 W / 1 m 89.6 dB
SPL Pmax / 1 m 101.6 dB
210
mm

Transmission range 130 ... 13300 Hz (-10 dB)

Dispersion angle 160°
Color white
Weight approx. 1.46 kg
Connection lead max. 2 m
Dimensions Ø: 185 mm

Delivery time on request

85
 Standard Loudspeaker Horn Loudspeaker

581271 15 W horn loudspeaker, ABS

1

The horn loudspeaker distinguishes itself by its high IP rating and reliability. The enclosure consists ​
of robust and fire-resistant ABS with very low weight. With its esthetic and elegant design, the ​
loudspeaker is suitable for application in a variety of locations, such as in train stations, ports, ​
police stations, traffic junctions, etc. The horn loudspeaker features robust adjustable mounting ​
brackets for precise dispersion of sound.
The loudspeaker is CE and RoHS compliant.
Technical Data
Rated Power 15 W
Transformer power taps 15 / 7,5 W
Rated impedance 0,67 / 1,3 kΩ
SPL 1 W / 1 m 103 dB
Transmission range 350 ... 8000 Hz (-10 dB)
165 Dispersion angle 140°
mm Ambient temperature -25 °C ... 55 °C
Storage temperature -40 °C ... 70 °C
240 Air humidity < 95 %
mm
Type of protection IP 66
Material ABS
Color white, similar to RAL 9003
Weight approx. 1.56 kg
Dimensions W: 240 mm H: 225 mm D: 165 mm
225 mm
Delivery time on request.

581272 30 W horn loudspeaker, ABS

1

The horn loudspeaker distinguishes itself by its high IP rating and reliability. The enclosure consists ​
of robust and fire-resistant ABS with very low weight. With its esthetic and elegant design, the ​
loudspeaker is suitable for application in a variety of locations, such as in train stations, ports, ​
police stations, traffic junctions, etc. The horn loudspeaker features robust adjustable mounting ​
brackets for precise dispersion of sound.
The loudspeaker is CE and RoHS compliant.
Technical Data
Rated Power 30 W
Transformer power taps 30 / 15 W
Rated impedance 0,33 / 0,67 kΩ
SPL 1 W / 1 m 104 dB
Transmission range 300 ... 10000 Hz (-10 dB)
205 Dispersion angle 150°
mm Ambient temperature -25 °C ... 55 °C
Storage temperature -40 °C ... 70 °C
290 Air humidity < 95 %
mm
Type of protection IP 66
Material ABS
Color white, similar to RAL 9003
Weight approx. 2.1 kg
Dimensions W: 290 mm H: 285 mm D: 205 mm
285 mm
Delivery time on request.

86 www.hls-austria.com
Standard Loudspeaker Music Cabinet Loudspeaker

581216 Loudspeaker Box VIVA-3 302 WT, 15 W, white 1

1

2-way encased loudspeaker with wall-mounting bracket and integrated 100 V

transformer. ​The VIVA-3 series is perfectly suitable for background music.
The 80 mm Mica Cone Rubber Edge Woofer, the 13 mm Mylar Dome Tweeter 2
and the U-​shaped wall-mounting bracket (included) contribute to the unbelie-
vable popularity of this s​ eries among all of our customers. It also is equipped with
a rotating logo which self-​adjusts according to the mounting position.
3
Technical Data
Loading capacity 15 W
Transformer power taps 15 W – 7.5 W – 3 W – 8 Ohm
SPL Pmax / 1 m 102 dB
4
SPL 1 W / 1 m 87 dB
Transmission range 150 ... 20000 Hz
Dispersion angle 170° (H), 180° (V)
Material ABS plastic housing, stainless steel U bracket & ​ 5
hardware
Color white
Weight approx. 1.5 kg

Delivery time on request 6

Standard Loudspeaker Accessories

581286 Ceramic terminal and thermal fuse

A 3-pin ceramic terminal and a thermal fuse (trigger temperature 240 °C) provide the necessary ​
protection to prevent a short circuit of the loudspeaker in case of fire and prevent further damage.
Delivery time on request

87
 Notes

88 www.hls-austria.com
 1

Volume Regulators Volume Regulators 90

89
 Volume Regulators

581238 Flush mounted volume controller, 5 W

1

Flushmounted Volume Controller 5 watts, with compulsory relay (24 V DC).

581239 Flush mounted volume controller, 30 W

1

Flushmounted Volume Controller 30 watts, with compulsory relay (24 V DC).

581240 Flush mounted volume controller, 60 W

1

Flushmounted Volume Controller 60 watts, with compulsory relay (24 V DC).

90 www.hls-austria.com
 1

Passive Beam Steering Systems LEN-20 92

LEN-60 93
LEN-100 94
LEN-150 95
LEN-220 96

91
 Passive Beam Steering Systems LEN-20

582650.B Linea LEN-20 EN 54-24, black

Passive 100 V loudspeaker, with weatherproof aluminium housing, designed for use with voice ​
alarm systems - certified according to EN 54-24, Type B, equipped with two high-quality 4” drivers ​
1

with treated cones for optimum efficiency in speech and voice alarms.
Technical Data
SPL Pmax / 1 m 104 dB
Dispersion angle 130° (H) x 60° (V) nominal; 360° (H) x 360° (V) @ 500 Hz; ​
190° (H) x 120° (V) @ 1000 Hz; 120° (H) x 60° (V) @ 2000 ​
Hz; 95° (H) x 30° (V) @ 4000 Hz
34 Housing weatherproof aluminium housing, powder coated, steel ​
bracings
Color black, similar to RAL 9005, powder-coated
Weight approx. 3 kg
M 6 Gewinde Dimensions W: 130 mm H: 230 mm D: 120 mm
120
85 M 6 thread
Accessories
582613.B Wall mount WAL-03, black
130

Features
• EN 54-24 certified, 100 V loudspeaker for use with ​
voice alarm systems
• suitable for both indoor and outdoor use
• exceptionally even sound dispersion
• SIDE LOBE FREE – passive realization
• equipped with high performance speakers
• excellent speech intelligibility and sound quality
• a long reach
• weatherproof without requiring additional protection ​
(protection class IP54 in accordance with IEC 529 / ​
EN 60529)
• ball impact resistant front grille made from galvanised ​
sheet steel
• ultra-compact, low weight

582650.W Linea LEN-20 EN 54-24, white

Same as 582650.B, but white.

1

Technical Data
Color white, similar to RAL 9016, powder-coated

Accessories
582613.W Wall mount WAL-03, white

34

M 6 Gewinde
120
85 M 6 thread

130

92 www.hls-austria.com
Passive Beam Steering Systems LEN-60

582652.B Linea LEN-60 EN 54-24, black 1

Passive 100 V loudspeaker, with weatherproof aluminium housing, designed for use with voice ​
alarm systems - certified according to EN 54-24, Type B, equipped with two high-quality 4” drivers ​
1

with treated cones for optimum efficiency in speech and voice alarms. 2
Technical Data
SPL Pmax / 1 m 112 dB
Dispersion angle 130° (H) x 25° (V) nominal; 360° (H) x 90° (V) @500 Hz; ​ 3
190° (H) x 40° (V) @ 1000 Hz; 120° (H) x 25° (V) @ 2000 ​
Hz; 95° (H) x 13° (V) @ 4000 Hz
Housing weatherproof aluminium housing, powder coated, steel ​
bracings
Color black, similar to RAL 9005, powder-coated 4
Weight approx. 7.5 kg
Dimensions W: 130 mm H: 640 mm D: 120 mm
34
Accessories 5
582614.B Wall mount WLX-100, black
M 6 Gewinde
120
85 M 6 thread
6
130

7
Features
• EN 54-24 certified, 100 V loudspeaker for use with ​
voice alarm systems
• suitable for both indoor and outdoor use
• exceptionally even sound dispersion
• SIDE LOBE FREE – passive realization
• equipped with high performance speakers
• excellent speech intelligibility and sound quality
• a long reach
• weatherproof without requiring additional protection ​
(protection class IP54 in accordance with IEC 529 / ​
EN 60529)
• ball impact resistant front grille made from galvanised ​
sheet steel

582652.W Linea LEN-60 EN 54-24, white

Same as 582652.B, but white.

1

Technical Data
Color white, similar to RAL 9016, powder-coated

Accessories
582614.W Wall mount WLX-100, white

34

M 6 Gewinde
120
85 M 6 thread

130

93
 Passive Beam Steering Systems LEN-100

582654.B Linea LEN-100 EN 54-24, black

Passive 100 V loudspeaker, with weatherproof aluminium housing, designed for use with voice ​
alarm systems - certified according to EN 54-24, Type B, equipped with two high-quality 4” drivers ​
1

with treated cones for optimum efficiency in speech and voice alarms.
Technical Data
SPL Pmax / 1 m 114 dB
Dispersion angle 130° (H) x 15° (V) nominal; 360° (H) x 55° (V) @500 Hz; ​
190° (H) x 25° (V) @ 1000 Hz; 120° (H) x 15° (V) @ 2000 ​
Hz; 95° (H) x 8° (V) @ 4000 Hz
Housing weatherproof aluminium housing, powder coated, steel ​
bracings
Color black, similar to RAL 9005, powder-coated
Weight approx. 9.5 kg
34 Dimensions W: 130 mm H: 990 mm D: 120 mm

Accessories
M 6 Gewinde 582614.B Wall mount WLX-100, black
120
85 M 6 thread

130

Features
• EN 54-24 certified, 100 V loudspeaker for use with ​
voice alarm systems
• suitable for both indoor and outdoor use
• exceptionally even sound dispersion
• SIDE LOBE FREE – passive realization
• equipped with high performance speakers
• excellent speech intelligibility and sound quality
• a long reach
• weatherproof without requiring additional protection ​
(protection class IP54 in accordance with IEC 529 / ​
EN 60529)
• ball impact resistant front grille made from galvanised ​
sheet steel

582654.W Linea LEN-100 EN 54-24, white

Same as 582654.B, but white.

1

Technical Data
Color white, similar to RAL 9016, powder-coated

Accessories
582614.W Wall mount WLX-100, white

34

M 6 Gewinde
120
85 M 6 thread

130

94 www.hls-austria.com
Passive Beam Steering Systems LEN-150

582657.B Linea LEN-150 EN 54-24, black 1

Passive 100 V loudspeaker, with weatherproof aluminium housing, designed for use with voice ​
alarm systems - certified according to EN 54-24, Type B, equipped with two high-quality 4” drivers ​
1

with treated cones for optimum efficiency in speech and voice alarms. 2
Technical Data
SPL Pmax / 1 m 118 dB
Dispersion angle 130° (H) x 14° (V) nominal; 360° (H) x 35° (V) @500 Hz; ​ 3
190° (H) x 20° (V) @ 1000 Hz; 120° (H) x 14° (V) @ 2000 ​
Hz; 95° (H) x 8° (V) @ 4000 Hz
Housing weatherproof aluminium housing, powder coated, steel ​
bracings
Color black, similar to RAL 9005, powder-coated 4
Weight approx. 14.5 kg
Dimensions W: 130 mm H: 1460 mm D: 120 mm
34
Accessories 5
582614.B Wall mount WLX-100, black
M 6 Gewinde
120
85 M 6 thread
6
130

7
Features
• EN 54-24 certified, 100 V loudspeaker for use with ​
voice alarm systems
• suitable for both indoor and outdoor use
• exceptionally even sound dispersion
• SIDE LOBE FREE – passive realization
• equipped with high performance speakers
• excellent speech intelligibility and sound quality
• a long reach
• weatherproof without requiring additional protection ​
(protection class IP54 in accordance with IEC 529 / ​
EN 60529)
• ball impact resistant front grille made from galvanised ​
sheet steel

582657.W Linea LEN-150 EN 54-24, white

Same as 582657.B, but white.

1

Technical Data
Color white, similar to RAL 9016, powder-coated

Accessories
582614.W Wall mount WLX-100, white

34

M 6 Gewinde
120
85 M 6 thread

130

95
 Passive Beam Steering Systems LEN-220

582660.B Linea LEN-220 EN 54-24, black

Passive 100 V loudspeaker, with weatherproof aluminium housing, designed for use with voice ​
alarm systems - certified according to EN 54-24, Type B, equipped with two high-quality 4” drivers ​
1

with treated cones for optimum efficiency in speech and voice alarms.
Technical Data
SPL Pmax / 1 m 120 dB
Dispersion angle 130° (H) x 14° (V) nominal; 360° (H) x 55° (V) @500 Hz; ​
190° (H) x 15° (V) @ 1000 Hz; 120° (H) x 14° (V) @ 2000 ​
Hz; 95° (H) x 8° (V) @ 4000 Hz
Housing weatherproof aluminium housing, powder coated, steel ​
bracings
Color black, similar to RAL 9005, powder-coated
Weight approx. 19.5 kg
Dimensions W: 130 mm H: 2200 mm D: 120 mm

34 Accessories
582614.B Wall mount WLX-100, black
M 6 Gewinde
120
85 M 6 thread

130

Features
• EN 54-24 certified, 100 V loudspeaker for use with ​
voice alarm systems
• suitable for both indoor and outdoor use
• exceptionally even sound dispersion
• SIDE LOBE FREE – passive realization
• equipped with high performance speakers
• excellent speech intelligibility and sound quality
• a long reach
• weatherproof without requiring additional protection ​
(protection class IP54 in accordance with IEC 529 / ​
EN 60529)
• ball impact resistant front grille made from galvanised ​
sheet steel

582660.W Linea LEN-20 EN 54-24, white

Same as 582660.B, but white.

1

Technical Data
Color white, similar to RAL 9016, powder-coated

Accessories
582614.W Wall mount WLX-100, white

34

M 6 Gewinde
120
85 M 6 thread

130

96 www.hls-austria.com
 1

Index Part Number Index 98

Keyword Index 99-101

97
 Part Number Index

Part No. Page Part No. Page Part No. Page Part No. Page

58023118 582407.FD67 583331.2135 58350624

58023218 582407.safe66 58333235 58350730
580242 13, 19 58240867 583341.2137 58352022
580243 13, 19 582408.FD68 58334217 58352622
580248.1120 582408.SAFE68 58335136 58352924
580249.1120 582420 69, 70 583361.226 58353541
58026121 582420.1070 583362.227 58356032
58026221 58242170 583371.2133 58356532
581215 85, 90 58242271 583381.3134 58365153
58121687 582422.1071 583386.21 43, 51 58365253
58122884 58242372 583392.1144 58365354
58123890 58242473 583393.1145 58370346
58123990 58242572 583394.1144 58370446
58124090 58243074 583401.2155 58370546
58125284 58243175 58341056 58370646
58125482 58243275 583413 15, 58 58370746
58125784 58243376 583414 15, 57 58370846
58125885 58244178 583422.2155 583708.HO46
58126382 58246079 58344155 58370946
58127083 58246179 583441.10 15, 55 58371046
58127186 58247069 58344455 5839409
58127286 58247377 583444.1055 58394110
58127683 58247477 583451.2155 58394411
58127783 58247578 583452.2155 58394512
58128687 58247680 583466A57 58410048
58131042 58247780 583467A57 58410148
58131642 58247974 583469A57 58410248
58131742 58248063 583471.2156 58496127
58132042 582650.B92 583472.2156 58496227
58132943 582650.W92 583473.2156 58496327
58134058 582652.B93 583476.2156 58610231
58135260 582652.W93 583477.21 15, 56 58610331
58135360 582654.B94 583481A56 58610431
58135560 582654.W94 583482A56 58611545
58135760 582657.B95 583483A56 58611645
58172139 582657.W95 583486A57 77238649
58172238 582660.B96 583487A57 78133650
58172338 582660.W96 583488A57 784840.1049
58172439 583300.HO30 58348957 784841.1049
58172539 58330730 58349057 78485649
581730 14, 40 58330814 583491A 15, 57 788603.10 41, 50
58173214 58331130 58349257 78860649
58240064 583315.0229 58349643 80568350
58240164 583316.2128 583501.RE23 HN-D32N42
58240263 583316.SM28 583502.RE24 LSC-50662
58240465 583317.2129 583503.RE25 LSC-60662
58240665 583317.SM29 583504.RE26 X-MAP0437
58240766 58331830 583505.RE26

98 www.hls-austria.com
Keyword Index

Keyword Page Keyword Page 1

A Digital Call Station DCS15 redundant 23

Digital Call Station DCS plus 22 2
Adapter TWI-RS232 43, 51
Digital firefighter microphone DCSF1 redundant 26
Adhesive label for DCS "Esser by Honeywell" 30
Digital firefighter microphone DCSF12 redundant 25
Alarm transponder VARIODYN D1 41 3
Digital Key Module DKM18 for redundant call
Audio-connection cable length 1.8 m 57
stations24
B Digital Key Module DKM plus 22
4
Digital Output Module DOM4-8 6
Backup cable RC 22 VARIODYN D1 55
Digital Output Module DOM4-24 7
Backup cable RC 41 VARIODYN D1, 0.5 m 15, 55
Doormaster-Smart-PAL-Telephone interface 45 5
Backup cable RC 41 VARIODYN D1, 2 m 55
Dummy plate 1 HU 46
Backup cable RC 44 VARIODYN D1, 0.5 m 55
Dummy plate 2 HU 46
Backup cable RC 44 VARIODYN D1, 2 m 55 6
Dummy plate 3 HU 46
Battery 12 V / 65 Ah 14
Dummy plate 4 HU 46
Battery for emergency power supply 12 V / 105 Ah
Dummy plate 4 HU (DCSF) 46
 14, 40 7
Dummy plate 4 HU (DCSF/DKM) 46
C DVD/CD/MP3/FM/AM audio player 37
Dynamic Microphone with Gooseneck 32
Cable for cabinet rear panel DOM4-8 55
Cable for cabinet rear panel DOM4-24 55 E
Cable set 24 V DC VARIODYN D1 Comprio 4XD 15,
Emergency power supply 24 V / 150 A 39
57
Emergency power supply PSU 24 V-2 38
Cable set for connecting batteries to VARIODYN D1
Emergency power supply PSU 24 V-2 net 39
4XDxxxB amplifier 15, 58
Emergency power supply PSU 24 V-4 38
CAT5 patch cable, 0.5 m gray (Periphery) 57
Emergency power supply PSU 24 V-4 net 39
CAT5 patch cable, 0,5 m green (DOM to amplifier)
Enclosure for a firefighter paging microphone DCSF
 15, 57
27
CAT5 patch cable, 1 m blue (DAL) 56
Enclosure for one firefighter paging microphone and
CAT5 patch cable, 1 m gray (Periphery) 57
one DKM 27
CAT5 patch cable, 1 m yellow (Ethernet) 57
End-of-Line module EOL 43
CAT5 patch cable, 2 m blue (DAL) 56
essernet module, 62.5 kBd for IQ8Control 49
CAT5 patch cable, 2 m yellow (Ethernet) 57
essernet module, 500 kBd for IQ8Control 49
CAT5 patch cable, 3 m blue (DAL) 56
External power supply DCU 2403 50
CAT5 patch cable, 3 m gray (Periphery) 57
CAT5 patch cable, 3 m yellow (Ethernet) 57 F
Ceiling Loudspeaker EDL 06-165/T 82
Fiber Optic module for FO Switch, multimode 44
Ceilling Speaker DL-E 06-130/T-EN 66
Fiber Optic module for FO Switch, single mode 45
Ceilling Speaker DL-E 06-130/T-EN.SAFE 66
Fibre Optic Switch for Ethernet ring 44
Ceramic terminal and thermal fuse 87
Fire Brigade Call Station DCSF7 26
Connection cable battery -PSU 56
Firedome for Ceiling Speaker Part No. 582407 67
Contact Interface Module CIM 37
Fire dome for ceiling speaker Part No. 582408 68
Control cable 12 for UIM 55
Flush mounted volume controller, 5 W 90
D Flush mounted volume controller, 30 W 90
Flush mounted volume controller, 60 W 90
DC/DC converter output voltage 12 V DC 50
Flush-mounted XLR panel jack 42
Desktop call station with pre chime DIGIM4 31
FM/AM/USB/SD player 60
Desktop microphone with pre chime DIGIM1 31
Four-channel amplifier 4XD125B 13
Digital Call Station DCS2 redundant 24
Four-channel amplifier 4XD250B 13, 19

99
 Keyword Index

Keyword Page Keyword Page

10 W 6.5" round wall or ceiling surface mount

Four-channel amplifier 4XD300 20
loudspeaker, metal 72
Four-channel amplifier 4XD500 20
6 W cabinet loudspeaker, ABS 83
Four-channel amplifier 4XV300 21
10 W 8" ceiling loudspeaker EN 54, metal 63
Four-channel amplifier 4XV500 21
10 W 8" round wall or ceiling surface mount loudspe-
H aker, metal 73
Hand-held microphone for VARIODYN D1 Comprio 10 W cabinet loudspeaker, ABS 83
14 15 W horn loudspeaker, ABS 86
Horn Loudspeaker DK 10/T EN54 74 15 W horn loudspeaker EN 54, ABS 74
Horn Loudspeaker DK 15/T EN54 75 16 W spherical speaker EN 54, ABS 79
Housing for SEI 49 20 W column loudspeaker EN 54, metal 80
20 W spherical loudspeaker, metal 85
I 20 W spherical speaker EN 54, ABS 79
Input cable DOM (G1) – amplifier (as of G2) 56 24 W 6.5" 2-way ceiling loudspeaker EN 54, metal63
Input cable DOM (G1) - XV amplifier (G1) 56 30 W 2-way horn loudspeaker EN 54, ABS 76
Installation kit for redundant DCS 30 30 W horn loudspeaker, ABS 86
Interface module RS232 / 24 V 49 30 W horn loudspeaker EN 54, ABS 75
40 W cabinet loudspeaker, ABS 83
K 40 W column oudspeaker EN 54, metal 80
Keyboard cover for DCS plus und DKM plus 24 6 W cabinet loudspeaker, wooden, EN 54-24 70
Keyboard cover for DCS VARIODYN D1 call station Loudspeaker Box VIVA-3 302 WT, 15 W, white 87
30 LWL converter for DCS multi mode 29
Key cap 30 LWL converter for DCS single mode 29
LWL converter multi mode 28
L
LWL converter single mode 28
Linea LEN-20 EN 54-24, black 92
M
Linea LEN-20 EN 54-24, white 92, 96
Linea LEN-60 EN 54-24, black 93 Mains Switching Unit MSU 33
Linea LEN-60 EN 54-24, white 93 Measuring microphone for D1 AVC in a 5’’ recessed
Linea LEN-100 EN 54-24, black 94 ceiling housing 42
Linea LEN-100 EN 54-24, white 94 Microphone P4, for AVC 42
Linea LEN-150 EN 54-24, black 95 MMA 240 mixing amplifier 60
Linea LEN-150 EN 54-24, white 95 Module housing for top-hat mounting rail 41, 50
Linea LEN-220 EN 54-24, black 96 Mounting kit 1 46
Loop Isolator Module LIM 17 Mounting kit for microphone P4 42
2 x 6 W, 2 x 4" AB cabinet loudspeaker EN 54, MDF N
71
2x6 W 2x4" ceiling loudspeaker EN 54, metal 65 Noise Detector 42
6 W 4" cabinet loudspeaker EN 54, metal 69 O
6 W 5" ceiling loudspeaker EN 54 with fire dome,
metal62 Output cable 2 amplifier DOM 15, 56
6 W 5'' ceiling loudspeaker, metal 82 Output cable amplifier DOM 56
6 W 6.5" ceiling loudspeaker EN 54, metal 67 Overvoltage protection for UIM contacts 35
6 W 6.5" ceiling loudspeaker EN 54.SAFE, metal 68 P
6 W 6.5" ceiling loudspeaker EN 54 with fire dome,
PAMMI Plus client 53
metal62
PAMMI Plus PA server 53
6 W 6.5" flush-mounted wall loudspeaker EN 54 72

100 www.hls-austria.com
Keyword Index

Keyword Page Keyword Page 1

PAMMI Plus server/client 54 Ventilation panel 1 HU (without branding) 46

2
PC Touch Screen Call Station 32 View Control Module VCM 36
Peripheral clip for top hat rail 58
W
Power amplifier 2XD250 18 3
Power amplifier 2XD400 18 Wall/Ceiling Loudspeaker Round EDL A 10-165/T 84
Power supply for LWL converter 29 Wall Surface Mount Speaker EWA06-165/T, white 84
Power supply for telephone interface 45 Wall surface mount speaker i Speak 6 84 4
Profile half-cylinder with standard closure 27 Wall Surface Mount Speaker WA 06-165/T-EN54 69
Wall Surface mount Speaker WA 06-165/T
R 5
Metal-EN5470
Recessed Ceiling Loudspeaker DL 06-130/T-EN5464 Wall-surface mount terminal box for DCS 30
Recessed Ceiling Loudspeaker DL 06-165/T-EN5464 6
X
Recessed Ceiling Loudspeaker DL 10-165/T plus-
EN5465 XLR cable 1 m, plug jack length 1 m 57
XLR cable 10 m, plug jack length 10 m 57 7
S
SEI serial essernet interface EDP, bidirectional 49
10 W unidirectional sound projector EN 54, metal 77
20 W bidirectional sound projector EN 54, metal 78
20 W unidirectional sound projector, ABS 85
20 W unidirectional sound projector EN 54, metal 77
Sound Projector DA-S 20-130/T EN54 78
Surface mount box 43
Surge voltage protection for Ethernet or DAL bus 48
Surge voltage protection module for connection to
the mains 48
Surge voltage protection module for loudspeaker
cables48
System Communication Unit SCU 34

T
TALK D dynamic microphone 60
TALK ST table stand 60

U
Universal Interface Module UIM 35
UP-box for DIGISystem desktop paging microphon
DIGIST0931

V
VARIODYN D1 Comprio 4-8 net (with Ethernet) 11
VARIODYN D1 Comprio 4-8 (Stand alone without
Ethernet)9
VARIODYN D1 Comprio 4-24 net (with Ethernet) 12
VARIODYN D1 Comprio 4-24 (Stand alone without
Ethernet)10
Ventilation panel 1 HU (Honeywell branding) 46

101
More informations:
www.hls-austria.com
Phone: +43(0)1 600 60 30
Fax: +43(0)1 600 60 30-900
Email: [email protected]

Honeywell Life Safety

Austria GmbH
Technologiestr. 5, building F, 3rd floor 054609.AT.G0 | May 2018| TM
A-1230 Vienna © 2018 Honeywell International Inc.