Calibration Instruments

Height Master
Page 343

Check Master
Page 347

Calibration Tools
Page 352

342 All products to be sold to commercial customers. Product illustrations are without obligation. Product descriptions, in particular any and all
technical specifications, are only binding when explicitly agreed upon. For suggested retail prices, please refer to the separate price list.
 Digital Height Master
Functions Series 515 Series 515
ZERO/ABS
DATA/HOLD This is a standard model with a digital display, that offers you the following bene-
Auto Power OFF fits:
after 20 min. non use
Low voltage alarm
• It gives you all the essential specifications required for a versatile height standard.
Data output • You can use it to calibrate and set height gauges and other measuring instru-
PRESET ments.
• Models have two measuring faces on the same level, one facing up and the other
Specifications
down.
Block arrangement Staggered
Block step 20 mm
Micrometer 20 mm
adjustment
Micrometer feed 0,5 mm
Block pitch accuracy 0 < range ” 310 mm : ±1,5 μm
310 < range ” 450 mm : ±2,5
μm
450 < range ” 610 mm : ±3,5
μm

Parallelism of blocks 0 < range ” 310 mm : 2 μm

310 < range ” 610 mm : 2,5 μm
Graduation 0,002 mm
Digital step 0,001 mm
Battery life approx. 1,8 years

Optional accessories
No. Description
515-111 Auxiliary block kit for Digital Height
Master
959149 Digimatic cable with data switch (1 m)
959150 Digimatic cable with data switch (2 m)
06ADV380C USB Input tool Direct cable with data
switch (2 m)
02AZD790C U-WAVE Data Cable with data switch

Consumable spares
No. Description
938882 Battery SR44

515-374

Metric
Range Total height Mass
No. Feed error Retrace error
[mm] [mm] [kg]
Staggered 20 mm Vertical 515-374 10-310 ±2 μm 2 μm 480 9,5
blocks (movable) orientation 515-376 10-460 ±2 μm 2 μm 630 13,6
515-378 10-610 ±2,5 μm 2,5 μm 785 16

Riser block
(optional)

All products to be sold to commercial customers. Product illustrations are without obligation. Product descriptions, in particular any and all
technical specifications, are only binding when explicitly agreed upon. For suggested retail prices, please refer to the separate price list.
343
Height Master
Series 515 Specifications
Block arrangement Straight
This height master offers you the following benefits: Block step 10 mm
• You can use it to calibrate and set height gauges and other measuring instru- Micrometer 20mm
ments. adjustment
• Models with the staggered arrangement of blocks have two measuring faces on Micrometer feed 0,5mm
the same level, one facing up and the other down. Block pitch accuracy 0 < range ” 310mm: ±1,5μm
310 < range ” 610mm:
• It is supplied in a fitted wooden case. ±2,5μm
610 < range ” 1010mm:
±3,5μm
Parallelism of blocks 0 < range ” 610mm: 1,5μm
610 < range ” 1010mm: 2μm
Graduation 0,001 mm

Optional accessories
No. Description
900574 Supporting base for vertical operation
515-110 Auxiliary block kit for bore gauge
900574 : supplied as a standard for 515-523 and 515-513

Single-row 10 mm Vertical
blocks (movable) orientation

Using in horizontal orientation

Riser block Horizontal

(optional) orientation

515-520

Metric
Range Mass
No. Feed error Retrace error
[mm] [kg]
515-520 5-610 ±1,2 μm 1,2 μm 45
515-523 5-1010 ±1,5 μm 1,5 μm 63,5

900574 (optional)
Supporting base for vertical operation

344 All products to be sold to commercial customers. Product illustrations are without obligation. Product descriptions, in particular any and all
technical specifications, are only binding when explicitly agreed upon. For suggested retail prices, please refer to the separate price list.
 Universal Height Master
Specifications Series 515
Block arrangement Staggered
(515-310 : straight) This Universal Height Master offers you the following benefits:
Micrometer adjustment 20 mm • It is designed for both vertical and horizontal orientations, enabling you to carry
Micrometer feed 0,5 mm out a wide range of applications such as accuracy checking of machine tool table
Block pitch accuracy ±1,5 μm movements.
Parallelism of blocks 1 μm • It is supplied in a fitted wooden case.
Graduation 0,001 mm

Optional accessories
No. Description
515-112 Auxiliary block kit for bore gauge

Staggered 20 mm Single-row 10 mm
blocks (movable) blocks (movable)
515-310

Vertical Riser block

orientation (optional)

515-322

Metric
Range Mass
No. Block step Feed error Retrace error
[mm] [kg]
515-322 5-310 20 mm (staggered) ±1 μm 1 μm 23

Height A
1. Scale 280.000 mm
2. Counter 5.670 mm
3. Thimble 0.000 mm

285.670 mm

All products to be sold to commercial customers. Product illustrations are without obligation. Product descriptions, in particular any and all
technical specifications, are only binding when explicitly agreed upon. For suggested retail prices, please refer to the separate price list.
345
Optional Accessories for Height Master
Series 515
This is an auxiliary block kit that allows you to efficiently car-
ry out reference-setting of dial bore gauges and tubular in-
side micrometers (18-150mm).

Metric
Mass
No. Suitable for Height Master
[g]
515-112 515-110 515-520 / 515-523 140
515-111 515-374 / 515-376 / 515-378 142
515-112 515-322 142 Bore gage reference setting

Content of set

Series 515 Specifications

Hardness of feet 88 HRA (Carbide)
These riser blocks offer you the following benefits: Hardness of upper support 64 HRC
• You can extend the measuring range up to 900mm by using 150, 300 or
600mm riser blocks.
• They can be used with both standard and digital Height Masters.

515-113 515-114

Metric
Height Mass
No. Accuracy Parallelism
[mm] [kg]
515-113 ±0,6 μm 150 mm 0,6 μm 5,7
515-114 ±1 μm 300 mm 0,8 μm 11,3
515-115 Sample application
515-115 ±2 μm 600 mm 1 μm 31

346 All products to be sold to commercial customers. Product illustrations are without obligation. Product descriptions, in particular any and all
technical specifications, are only binding when explicitly agreed upon. For suggested retail prices, please refer to the separate price list.
 Depth Micro Checker
Specifications Series 515
Anvil block accuracy ±0,5 μm
Block pitch accuracy ±(1+L/150)μm L= lenght to This Depth Micro Checker offers you the following benefits:
check (mm) • The Depth Micro Checker is designed to let you check and help set the range-end
points of a depth micrometer.
• A 25mm carbide gauge block is provided as the reference surface.

515-571

Metric
Range Mass
No. Reference checking lengths available
[mm] [kg]
515-570 0-150 25, 50, 75, 100, 125, 150 mm 3
515-571 0-300 25, 50, 75, 100, 125, 150, 175, 200, 225, 250, 275, 300 mm 17

mm

mm
25
50
75
100
125
150
175
9 16 9

200
225
25
50

250
275
75

345
100

300
125
150
180

72
92 92

515-570 515-571

All products to be sold to commercial customers. Product illustrations are without obligation. Product descriptions, in particular any and all
technical specifications, are only binding when explicitly agreed upon. For suggested retail prices, please refer to the separate price list.
347
CERA Caliper Checker
Series 515 Specifications
Block pitch accuracy Range ” 300 mm : ±0,005 mm
This CERA Caliper Checker offers you the following benefits: Range ” 600 mm : ±0,007 mm
• You can set and inspect caliper and height gauges.
• It comes with ceramic gauge blocks. Parallelism of blocks Range ” 300 mm : 0,002 mm
Range ” 600 mm : 0,004 mm

Optional accessories
No. Description
602162 Wooden case for 300 model
602164 Wooden case for 600 model

515-555

Metric
Range Mass
No. Reference checking lengths available for outside/inside measurement
[mm] [kg]
515-555 0-300 20, 50, 100, 150, 200, 250 and 300 mm 4
515-556-2 0-600 20, 50, 100, 150, 200, 250, 300, 350, 400, 450, 500, 550 and 600 mm 8,5 Checking a caliper

mm
Outside measurement
600mm
550mm
500mm
450mm
400mm
350mm
300mm
250mm
200mm
0 - 600mm 150mm
100mm
9 50mm
20mm
63
51

20mm
50 50mm
100mm
150mm
200mm
250mm
300mm
350mm
400mm
450mm
500mm
550mm
600mm
Inside measurement
684 Checking a height gauge

515-556-2
mm
Outside measurement
300mm
250mm
200mm
150mm
100mm
9 50mm
20mm
63
51

20mm
50 50mm
100mm
150mm
200mm
250mm
300mm
Inside measurement
374.5

348 All products to be sold to commercial customers. Product illustrations are without obligation. Product descriptions, in particular any and all
technical specifications, are only binding when explicitly agreed upon. For suggested retail prices, please refer to the separate price list.
 Inside Micro Checker
Specifications Series 515
Block pitch accuracy ±(1+L/150) μm
L = Length to check (mm) This Inside Micro Checker offers you the following benefits:
• Applicable for Series 133 only!
Delivered With accessory set • It designed to act as a setting standard for inside micrometers.
• It comes with ceramic gauge blocks.
Optional accessories
No. Description
602160 Wooden case for 300 Inside Micro
Checker
602163 Wooden case for 600 Inside Micro
Checker

515-585

Application with Series 133 only. Range Mass

No. Reference checking lengths available
[mm] [kg]
515-585 25-300 25, 50, 75, 100, 125, 150, 175, 200, 225, 250, 275, 300 mm 3,9
25, 50, 75, 100, 125, 150, 175, 200, 225, 250, 275, 300, 325, 350, 375, 400, 425, 450, 475, 500,
515-586 25-600 7
525, 550, 575, 600 mm

mm
364

340
61
51

50

515-585
mm
664

640
61

51

50

515-586

All products to be sold to commercial customers. Product illustrations are without obligation. Product descriptions, in particular any and all
technical specifications, are only binding when explicitly agreed upon. For suggested retail prices, please refer to the separate price list.
349
Check Master
Series 515 Specifications
Block step 10 mm
This Check Master allows you to test precision tool and coordinate measuring ma- Block pitch 0 < range ” 310 mm : ±2,5 μm
chines, and offers you the following benefits: accuracy 310 < range ” 610 mm : ±3,5 μm
• You can test the X, Y and Z-coordinate axes of precision tool machines and coor- 610 < range ” 1010 mm : ±5 μm
dinate measuring machines. 1010 < range ” 1510 mm : ±8 μm
• It consists of rigidly clamped gauge blocks with a step of 10mm. Parallelism of 0 < range ” 310 mm : 1,2 μm
• It is supplied in a fitted wooden case. blocks 310 < range ” 610 mm : 1,5 μm
610 < range ” 1010 mm : 2 μm
1010 < range ” 1510 mm : 2,5 μm

Hardness More than 64 HRC

Delivered In wooden box

Single-row
10 mm blocks

515-722

Metric
Range Mass
No.
[mm] [kg] Horizontal
515-720 0-300 7 orientation
515-721 0-450 10
515-722 0-600 13
515-723 0-1000 22
515-724 0-1500 30

Vertical
orientation

515-724 515-723 515-722

350 All products to be sold to commercial customers. Product illustrations are without obligation. Product descriptions, in particular any and all
technical specifications, are only binding when explicitly agreed upon. For suggested retail prices, please refer to the separate price list.
 High Accuracy Check Master
Specifications Series 515
Block step 10 mm
Block pitch 0 < range ” 310 mm : ±1,2 μm This High Accuracy Check Master offers you the following benefits:
accuracy 310 < range ” 610 mm : ±1,8 μm • You can use it to check the accuracy of table movements of machine tools and
610 < range ” 1010 mm : ±2,5 μm calibrate CMMs.
1010 < range ” 1510 mm : ±4 μm • It features a permanently wrung stack of gauge blocks housed in a rigid frame.
Parallelism of 0 < range ” 450 mm : 1 μm
• You can use it in either vertical or horizontal orientation.
blocks 450 < range ” 1010 mm : 1,5 μm • With the Ceramic Check Master, each measuring block is made of zirconia-based
1010 < range ” 1510 mm : 2 μm ceramic that requires no anti-corrosion treatment for measuring faces.

Delivered In a wooden box

Optional accessories
No. Description
601167 Supporting base for vertical operation

Single-row
515-743 515-742 515-740
10 mm blocks

Metric
Ceramic blocks
Range Mass
No.
[mm] [kg]
515-760 300 3,4
515-761 450 5,2
Vertical 515-762 600 6,9
orientation 515-763 1000 11,5
515-764 1500 17,3

Metric
Steel blocks
Range Mass
No.
[mm] [kg]
515-740 300 3,6
Horizontal 515-741 450 5,4
orientation 515-742 600 7,2
515-743 1000 12
515-744 1500 18

601167 (optional)
Supporting base for vertical operation

All products to be sold to commercial customers. Product illustrations are without obligation. Product descriptions, in particular any and all
technical specifications, are only binding when explicitly agreed upon. For suggested retail prices, please refer to the separate price list.
351
Step Master
Series 516 1
2
The Step Master is a gauge that provides you with four small increments in height and offers you 3
the following benefits: 4 5
• It is constructed from an assembly of five highly accurate, steel or ceramic gauge blocks.
• Each adjacent step is calibrated to a resolution of 0,01 μm by using an interferometer with an
accuracy tolerance of ±0,2 μm.
• Both steel and ceramic types are available.
Step value
1/2 2/3 3/4 4/5
516-198, 516-498 10 μm 5 μm 2 μm 1 μm
516-199, 516-499 300 μm 100 μm 50 μm 20 μm

516-499 Ceramic type 516-498 Ceramic type

516-198 Steel type

Metric
Ceramic blocks
No. Remarks
516-498 Ceramic type (step: 10, 5, 2, 1 μm)
516-499 Ceramic type (step: 300, 100, 50, 20 μm)

Metric
Steel blocks
No. Remarks
516-198 Steel type (step: 10, 5, 2, 1 μm)
516-199 Steel type (step: 300, 100, 50, 20 μm)

mm
1 2 3 4 5
15
25

300 100 50 20 μm
R

7 7 7 7 7
45
6

352 All products to be sold to commercial customers. Product illustrations are without obligation. Product descriptions, in particular any and all
technical specifications, are only binding when explicitly agreed upon. For suggested retail prices, please refer to the separate price list.
 Glass Scales
Specifications Series 182
Accuracy (1,5+2L/1000) μm
L = measured length (mm) These high precision glass scales offer you the following benefits:
• They are manufactured using Mitutoyo’s leading-edge Linear Scale production
Material Sodium glass technology.
Thermal expansion (8±1) x 10-6/K • They are ideal for checking the magnification accuracy of profile projectors and
coefficient
microscopes, as well as the table feed accuracy of measuring equipment.

182-525-10 / 182-523-10 / 182-522-10 / 182-513-10

Metric
Range Graduation Thickness of graduation line L Mass
No.
[mm] [mm] [μm] [mm] [kg]
182-511-10 50 0,1 20 75 0,23
182-512-10 100 0,1 20 125 0,24
182-521-10 100 0,5 50 130 0,27
182-513-10 150 0,1 20 175 0,35
182-514-10 200 0,1 20 225 0,36
182-522-10 200 0,5 50 230 0,32
182-531-10 250 1 100 280 0,55
182-523-10 300 0,5 50 330 0,57
182-524-10 400 0,5 50 430 0,71
182-525-10 500 0,5 50 530 0,86
182-532-10 500 1 100 530 0,86
182-533-10 750 1 100 780 1,22
182-534-10 1000 1 100 1030 1,54

mm
10
L 1
2.7 0.1
2.5
3.5
22

5 1.71.5

Graduation : 0,1 mm
mm
10
L
1
4.7 0.5
2.5
3.5
5
36

2 2

Graduation : 0,5 mm
mm
L 10
4.7 1
3.5
5
36

2 2

Graduation : 1 mm

All products to be sold to commercial customers. Product illustrations are without obligation. Product descriptions, in particular any and all
technical specifications, are only binding when explicitly agreed upon. For suggested retail prices, please refer to the separate price list.
353
Low Expansion Glass Scales
Series 182 Specifications
Accuracy (0,5+L/1000) μm
These high precision glass scales offer you the following benefits: L = measured length (mm)
• They are manufactured using Mitutoyo’s leading-edge Linear Scale production
technology. Graduation 1 mm
• You can use them as a standard for calibrating graduating scales, with high accu- Thickness of graduation 4 μm
line
racy.
Material Low expansion glass
Thermal expansion (0±0,02) x 10-6/K
coefficient

182-502-60
182-501-60

Metric
Range L T W Mass
No.
[mm] [mm] [mm] [mm] [kg]
182-501-60 250 280 10 20 0,75
182-502-50 500 530 20 30 1,8
182-502-60 500 530 20 30 1,8
-60 : with JCSS certificate

mm
L
T 1
W

4
2

354 All products to be sold to commercial customers. Product illustrations are without obligation. Product descriptions, in particular any and all
technical specifications, are only binding when explicitly agreed upon. For suggested retail prices, please refer to the separate price list.
 Calibration Tester
Specifications Series 170
Graduation 0,001 mm
Measuring face Carbide tipped, rotating This Calibration Tester offers you the following
benefits:
Optional accessories • It enables you to test dial indicators, lever
No. Description gauges and bore gauges with 0,01mm scale
12AAK824 Horizontal holder for bore gauge graduation.
inspection
• Bore gauges can be supported both horizon-
tally and vertically.

Metric
Range Mass
No. Accuracy
[mm] [kg]
170-102-12 0-25 ±2 μm 7,5

170-102-12

Specifications Series 521

Graduation 0,0002 mm
Repeatability 0,2 μm This allows the calibration of digital and analogue indicators, lever gauges and
Clamping capacity (stem) Ø 4-10 mm measuring probes with a maximum measuring span of 5mm.

521-105

Metric
Range Mass
No. Accuracy
[mm] [kg]
521-103 0-1 ±0,2 μm 7
521-105 0-5 ±0,8 μm 7,5

All products to be sold to commercial customers. Product illustrations are without obligation. Product descriptions, in particular any and all
technical specifications, are only binding when explicitly agreed upon. For suggested retail prices, please refer to the separate price list.
355
Calibration Tester I-Checker
Series 170 Specifications
Resolution 0,02 μm/0,8 μm
This universal measuring instrument enables you to calibrate all kinds of indicators,
lever indicators and bore gauges. Drive method Electric motor
The Calibration Tester I-Checker offers you the following benefits: Drive speed Max. 4 mm/s
• It has a measuring range of up to 100mm. Accuracy ±(0,2+L/100) μm in vertical
• I-Pak test and analysis software is provided. position
±(0,3+2L/100) μm in lateral
• You can adjustment the measuring position very easily thanks to its semi-auto- position
matic and fully automatic measurement functions. L = measured length (mm)
• Its measuring surface is carbide tipped.
Measuring unit Reflective-type glass linear
encoder

Expansion (8±1)X10-6/K
coefficient

Dimensions 184 x 225 x 532 mm (W x D x H)

[mm]
Operation 20°C±3°C
temperature
Power supply 100VAC to 240VAC ±10%,
50/60Hz
Mass 20 kg

i-Checker brochure on request

170-321D

Metric
No. Range Accuracy Remarks
±(0,2+L/100) μm in vertical position
I-Pak software comfirms EN ISO 463 (2006), DIN 878 (1983),
±(0,3+2L/100) μm in lateral position
170-321D 100 mm DIN 2270 (1985), DIN 879 (1983), VDI/VDE/DGQ 2618, JIS
L = measured length (mm)
B7503 (2011) a.s.o.

356 All products to be sold to commercial customers. Product illustrations are without obligation. Product descriptions, in particular any and all
technical specifications, are only binding when explicitly agreed upon. For suggested retail prices, please refer to the separate price list.
 Gauge Block Comparator GBCD-250
Specifications Series 565
Resolution 0,00001 mm (0,01 μm)
Measuring unit Laser Hologage (upper, lower) This Manual Comparator with Dual Gauge Heads offers you the following benefits:
Measuring force 0,7N (upper) • It performs gauge block calibration according to EN ISO 3650.
0,2N (lower) N • You can easily compare gauge blocks between 0,1mm and 250mm with reference gauge blocks.
• The upper and lower gauging heads give you of easy, high-accuracy measurement.

Range
No.
[mm]
565-150D-01 0,1-250

Cylindrical Measuring Pin

Specifications Series 926
Accuracy DIN 2269
Finish Very fine ground, This is a complete incremental set of plug (or pin) gauges, that offers you the following benefits:
from Ø 3 mm inscribed • It includes 91 or 273 pieces that you can use in the inspection room, or on the shop floor in tool
and fixture making.
Roughness ” 0,1 μm Ra
Hardness HRC 60-62
Length up to Ø 6 mm = 50 mm over Ø 6 mm = 70
mm
Delivered In a wooden box

926-222

926-210

Set of 273 pieces

No. Accuracy grade Remarks
1-10 mm, rising by 0,1mm
926-210 1
0mm (size); +0,01mm (oversize) and -0,01mm (undersize)
1-10 mm, rising by 0,1mm
926-212 2
0mm (size); +0,01mm (oversize) and -0,01mm (undersize)

Set of 91 pieces
No. Accuracy grade Remarks
926-220 1 1-10mm, rising by 0,1mm
926-222 2 1-10mm, rising by 0,1mm

All products to be sold to commercial customers. Product illustrations are without obligation. Product descriptions, in particular any and all
technical specifications, are only binding when explicitly agreed upon. For suggested retail prices, please refer to the separate price list.
357