2SK4115

www.DataSheet4U.com
TOSHIBA Field Effect Transistor Silicon N-Channel MOS Type (π- MOSⅣ)

2SK4115
Switching Regulator Applications
Unit: mm

• Low drain-source ON resistance: RDS (ON) = 1.6 Ω (typ.) 15.9max. Ф3.2±0.2

• High forward transfer admittance: ⎪Yfs⎪ = 5.0 S (typ.)

2.0

1.0

4.5
• Low leakage current: IDSS = 100 μA (max) (VDS = 720 V)
• Enhancement model: Vth = 2.0~4.0 V (VDS = 10 V, ID = 1 mA)

20.0±0.3
3.3max.

2.0

9.0
Absolute Maximum Ratings (Ta = 25°C) 2.0±0.3

20.5±0.5
＋0.3
Characteristic Symbol Rating Unit 1.0 －0.25

Drain-source voltage VDSS 900 V 5.45±0.2 5.45±0.2

4.8max.
Drain-gate voltage (RGS = 20 kΩ) VDGR 900 V

＋0.3
0.6－0.1
1.8max.
Gate-source voltage VGSS ±30 V
DC (Note 1) ID 7

2.8
1 2 3
Drain current A
Pulse (Note 1) IDP 21 1. GATE
2. DRAIN (HEATSINK)
Drain power dissipation (Tc = 25°C) PD 150 W 3. SOURCE
Single pulse avalanche energy
EAS 491 mJ
(Note 2)
JEDEC ―
Avalanche current IAR 7 A
JEITA SC-65
Repetitive avalanche energy (Note 3) EAR 15 mJ
TOSHIBA 2−16C1B
Channel temperature Tch 150 °C
Weight: 4.6 g (typ.)
Storage temperature range Tstg −55~150 °C

Note: Using continuously under heavy loads (e.g. the application of high
temperature/current/voltage and the significant change in temperature, etc.) may cause this product to decrease in the
reliability significantly even if the operating conditions (i.e. operating temperature/current/voltage, etc.) are within the
absolute maximum ratings. Please design the appropriate reliability upon reviewing the Toshiba Semiconductor Reliability
Handbook (“Handling Precautions”/Derating Concept and Methods) and individual reliability data (i.e. reliability test report
and estimated failure rate, etc).

Thermal Characteristics
2
Characteristic Symbol Max Unit

Thermal resistance, channel to case Rth (ch-c) 0.833 °C/W

Thermal resistance, channel to ambient Rth (ch-a) 50 °C/W

Note 1: Ensure that the channel temperature does not exceed 150°C 1
during use of the device.

Note 2: VDD = 90 V, Tch = 25°C, L = 18.4 mH, RG = 25 Ω, IAR = 7 A

Note 3: Repetitive rating: pulse width limited by max junction temperature 3

This transistor is an electrostatic-sensitive device. Handle with care.

1 2007-07-24

Free Datasheet http://www.datasheet.in/

 2SK4115
www.DataSheet4U.com
Electrical Characteristics (Ta = 25°C)

Characteristic Symbol Test Condition Min Typ. Max Unit

Gate leakage current IGSS VGS = ±30 V, VDS = 0 V ⎯ ⎯ ±10 μA

Drain-source breakdown voltage V (BR) GSS IG = ±10 μA, VDS = 0 V ±30 ⎯ ⎯ V
Drain cutoff current IDSS VDS = 720 V, VGS = 0 V ⎯ ⎯ 100 μA
Drain-source breakdown voltage V (BR) DSS ID = 10 mA, VGS = 0 V 900 ⎯ ⎯ V
Gate threshold voltage Vth VDS = 10 V, ID = 1 mA 2.0 ⎯ 4.0 V
Drain-source ON resistance RDS (ON) VGS = 10 V, ID = 3.5 A ⎯ 1.6 2.0 Ω
Forward transfer admittance ⎪Yfs⎪ VDS = 10 V, ID = 3.5 A 3.5 5.0 ⎯ S
Input capacitance Ciss ⎯ 1650 ⎯
Reverse transfer capacitance Crss VDS = 25 V, VGS = 0 V, f = 1 MHz ⎯ 30 ⎯ pF

Output capacitance Coss ⎯ 140 ⎯

Rise time tr ⎯ 50 ⎯
10 V ID = 3.5 A
VGS VOUT
Turn-on time ton 0V ⎯ 90 ⎯
RL = 114 Ω
50 Ω
Switching time ns
Fall time tf ⎯ 70 ⎯

VDD ∼
− 400 V
Duty <
= 1%, tw = 10 μs
Turn-off time toff ⎯ 240 ⎯

Total gate charge

Qg ⎯ 45 ⎯
(gate-source plus gate-drain)
VDD ∼
− 400 V, VGS = 10 V, ID = 7 A nC
Gate-source charge Qgs ⎯ 24 ⎯
Gate-drain (“Miller”) charge Qgd ⎯ 21 ⎯

Source-Drain Ratings and Characteristics (Ta = 25°C)

Characteristic Symbol Test Condition Min Typ. Max Unit

Continuous drain reverse current (Note 1) IDR ⎯ ⎯ ⎯ 7 A

Pulse drain reverse current (Note 1) IDRP ⎯ ⎯ ⎯ 21 A
Forward voltage (diode) VDSF IDR = 7 A, VGS = 0 V ⎯ ⎯ −1.7 V
Reverse recovery time trr IDR = 7 A, VGS = 0 V, ⎯ 1400 ⎯ ns
Reverse recovery charge Qrr dIDR/dt = 100 A/μs ⎯ 12 ⎯ μC

Marking

TOSHIBA
K4115 Part No. (or abbreviation code)
Lot No.

A line indicates
Lead (Pb)-Free

2 2007-07-24

Free Datasheet http://www.datasheet.in/

 2SK4115
www.DataSheet4U.com

RESTRICTIONS ON PRODUCT USE 20070701-EN

• The information contained herein is subject to change without notice.

• TOSHIBA is continually working to improve the quality and reliability of its products. Nevertheless, semiconductor
devices in general can malfunction or fail due to their inherent electrical sensitivity and vulnerability to physical
stress. It is the responsibility of the buyer, when utilizing TOSHIBA products, to comply with the standards of
safety in making a safe design for the entire system, and to avoid situations in which a malfunction or failure of
such TOSHIBA products could cause loss of human life, bodily injury or damage to property.
In developing your designs, please ensure that TOSHIBA products are used within specified operating ranges as
set forth in the most recent TOSHIBA products specifications. Also, please keep in mind the precautions and
conditions set forth in the “Handling Guide for Semiconductor Devices,” or “TOSHIBA Semiconductor Reliability
Handbook” etc.

• The TOSHIBA products listed in this document are intended for usage in general electronics applications
(computer, personal equipment, office equipment, measuring equipment, industrial robotics, domestic appliances,
etc.).These TOSHIBA products are neither intended nor warranted for usage in equipment that requires
extraordinarily high quality and/or reliability or a malfunction or failure of which may cause loss of human life or
bodily injury (“Unintended Usage”). Unintended Usage include atomic energy control instruments, airplane or
spaceship instruments, transportation instruments, traffic signal instruments, combustion control instruments,
medical instruments, all types of safety devices, etc.. Unintended Usage of TOSHIBA products listed in his
document shall be made at the customer’s own risk.

• The products described in this document shall not be used or embedded to any downstream products of which
manufacture, use and/or sale are prohibited under any applicable laws and regulations.

• The information contained herein is presented only as a guide for the applications of our products. No
responsibility is assumed by TOSHIBA for any infringements of patents or other rights of the third parties which
may result from its use. No license is granted by implication or otherwise under any patents or other rights of
TOSHIBA or the third parties.

• Please contact your sales representative for product-by-product details in this document regarding RoHS
compatibility. Please use these products in this document in compliance with all applicable laws and regulations
that regulate the inclusion or use of controlled substances. Toshiba assumes no liability for damage or losses
occurring as a result of noncompliance with applicable laws and regulations.

3 2007-07-24

Free Datasheet http://www.datasheet.in/