Scribd
Upload
142 views

Declaration of Conformity: Elcometer Limited

This document is a declaration of conformity for the Elcometer 456 Model B Coating Thickness Gauge. It declares that the gauge and its listed parts comply with the 2014/30/EU Electromagnetic Compatibility Directive and the 2011/65/EU Restriction of Hazardous Substances Directive. It was issued by Elcometer Limited and signed by the managing director, stating that the gauge meets the standards of EN 61326-1:2013 for electrical equipment EMC requirements, IEC 61326-1:2012, and EN 63000:2018 for technical documentation on restricted hazardous substances.

Uploaded by

hadyan rafdi
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
142 views

Declaration of Conformity: Elcometer Limited

This document is a declaration of conformity for the Elcometer 456 Model B Coating Thickness Gauge. It declares that the gauge and its listed parts comply with the 2014/30/EU Electromagnetic Compatibility Directive and the 2011/65/EU Restriction of Hazardous Substances Directive. It was issued by Elcometer Limited and signed by the managing director, stating that the gauge meets the standards of EN 61326-1:2013 for electrical equipment EMC requirements, IEC 61326-1:2012, and EN 63000:2018 for technical documentation on restricted hazardous substances.

Uploaded by

hadyan rafdi
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Elcometer Limited

Edge Lane, Manchester


M43 6BU. England
Tel: +44 (0)161 371 6000
Fax: +44 (0)161 371 6010
[email protected]

Declaration of Conformity www.elcometer.com


REGISTERED NO. 1729726 ENGLAND
Accredited to ISO 9001
ISO 14001

The Directives covered by this declaration:

2014/30/EU Electromagnetic Compatibility


2011/65/EU Restriction of the use of certain hazardous substances

Declares that the product(s): Elcometer 456 Model B Coating Thickness Gauge

Part Number(s): A456CFBI1, A456CFBI2, A456CFBI3, A456CFBS, A456CFNFBI1,


A456CFNFBS, A456CNBI1, A456CNBS

Product Option(s): T456CF1E, T456CF1P, T456CF1R, T456CF1S, T456CF1U,


T456CF2ARM, T456CF2B, T456CF2P, T456CF2PHT, T456CF2R, T456CF2S, T456CF2SW,
T456CF2SW-15, T456CF2SW-30, T456CF2SW-5, T456CF2SW-50, T456CF2T, T456CF2U,
T456CF3P, T456CF3S, T456CF6ARM, T456CF6S, T456CF7ARM, T456CFM3---A, T456CFM3---C,
T456CFM3R45A, T456CFM3R45D, T456CFM3R90A, T456CFM3R90C, T456CFM5R90A,
T456CFM7R45A, T456CFME5R90A, T456CFME5R90A-2, T456CFNF1P, T456CFNF1R,
T456CFNF1S, T456CFNF1U, T456CN1AS, T456CN1P, T456CN1R, T456CN1S, T456CN2P,
T456CN2S, T456CN6ARM, T456CN6S, T456CNM3---A, T456CNM3---C, T456CNM3R90A,
T456CNM3R90C, T456CNM3R90E, T456CNM5R90A, T456CNM5R90C, T456CNM5R90E,
T456CNMG3R90A, T456CNMG3R90C, T456CNMG3R90E, T465CFM3R90D, T99921325

This declaration of conformity is issued under the sole responsibility of Elcometer Limited.
The products identified above comply with the requirements of the above EU Directive by meeting the
following standards:
EN 61326-1:2013 Electrical equipment for measurement, control
IEC 61326-1:2012 and laboratory use – EMC requirements
Class B1, Group 12 ISM Part 1: General requirements.
EN 63000:2018 Technical documentation for the assessment of
electrical and electronic products with respect to
the restriction of hazardous substances

1
Class B product: Suitable for use in domestic establishments and in establishments directly connected to a low voltage
power supply network which supplies buildings used for domestic purposes.
2
Group 1 ISM product: Product in which there is intentionally generated and/or used conductively coupled radio-frequency
energy which is necessary for the internal functioning of the equipment itself.

Manchester, UK
Signed: Date: 4th January 2021
M. C. Sellars Authority: Managing Director
TMA-0680 Issue 02

You might also like