Scribd
Upload
62 views2 pages

AGCO Parts EP Gear Oil 80W-90 GL5: Product Information Sheet: Date: 20/01/2015 Ref: AP/EPG/03

This product information sheet provides details about AGCO Parts EP Gear Oil 80W-90 GL5. It is designed for use in severe operating conditions in gear units, axles, and final drives. It provides effective wear protection and has high viscosity/temperature properties. It is compatible with all seal materials and meets API GL5 and ZF specifications. Health and safety information is available in the material safety data sheet.

Uploaded by

Sergey Bashtoviy
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
62 views2 pages

AGCO Parts EP Gear Oil 80W-90 GL5: Product Information Sheet: Date: 20/01/2015 Ref: AP/EPG/03

This product information sheet provides details about AGCO Parts EP Gear Oil 80W-90 GL5. It is designed for use in severe operating conditions in gear units, axles, and final drives. It provides effective wear protection and has high viscosity/temperature properties. It is compatible with all seal materials and meets API GL5 and ZF specifications. Health and safety information is available in the material safety data sheet.

Uploaded by

Sergey Bashtoviy
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

Product Information Sheet:

Date: 20/01/2015
Ref: AP/EPG/03

AGCO Parts EP Gear Oil 80W-90 GL5

AGCO Parts references:

VACC3374 5 ltr
VACC3373 20 ltr
VACC3456 205 ltr

Applications

EP Gear Oil 80W-90 GL5 is designed for use in hypoid, bevel and spiral gear units, axles and final
drives operating under severe conditions and over a wide spectrum of operating temperatures.

Main Benefits

• Provides effective wear protection even under severe load conditions ensuring longer component life

• High safety margin against foaming and corrosion

• Superior viscosity/temperature and cold flow properties

• Compatible with all seal materials applied.

Specifications

API GL5
ZF TE-ML 05A/16B/17B/19B

Storage

All packages should be stored under cover. Where outside storage is unavoidable drums should be laid
horizontally to avoid the possible ingress of water and the obliteration of drum markings. Products should
not be stored above 60°C, exposed to hot sun or freezing conditions.
Health, Safety and Environment

Health, safety and environmental information is provided for this product in the Materials Safety Data
Sheet. This gives details of potential hazards, precautions and First Aid measures, together with
environmental effects and disposal of used products.

You should ensure that the product is only used for the purpose specified.

Typical Characteristics
SAE Classification 80W-90
Density at 15 oC 0.894
Viscosity at 100 oC, cSt. 15.0
Viscosity at 40 oC, cSt. 140
Viscosity Index 107
Flash Point (Open) oC 220
Pour Point, oC -30

The above figures are typical of those obtained with normal production tolerance and do not constitute a
specification.

This Product Information Sheet contains details considered to be accurate at the date of printing. No warranty or
representation, expressed or implied, is made as to the accuracy or completeness of the data and information
contained in this publication.

The Seller shall not be responsible for any loss or damage resulting from any hazards or risks identified in the data
sheet and which are associated with petroleum products concerned (provided that this disclaimer shall not affect
any statutory rights of the Buyer of the petroleum products concerned).

It is the User's obligation to evaluate and use products safely and within the scope advised in the data sheet and to
comply with all applicable laws and regulations. No statement made in this publication shall be construed as a
permission, recommendation or authorisation given or implied to practice any patented invention without a valid
licence.

You should always refer to the relevant machine Operators Instruction Manual and only use correct specifications
advised

Date Created: 20th January 2015 Ref AP/EPG/03 Page 2 of 2

You might also like