TRACKED EXCAVATOR | JS205 LR

MAXIMUM OPERATING WEIGHT: 23100 kg ENGINE POWER: 106 kW

STATIC DIMENSIONS ENGINE

Model Cummins 6BT5.9C

Type Water cooled, 4-stroke, 6-cylinder in-line, common rail direct injection,
turbocharged diesel.
Gross power 106 kW (140 hp) at 2000 rpm
Piston displacement 5.88 litres
Air filtration Dry element with secondary safety element and air pre-cleaner.
Starter motor 24 volt
Alternator 24 volt 75 amp.

SWING SYSTEM

STATIC DIMENSIONS Swing motor Axial piston

Swing brake Hydraulic braking, electrical-operated spring applied disc type parking brake.
Dimensions in millimetres LR Final drive Planetary reduction
A Track length on ground 3660 Swing torque 65.2 kN-m
Swing speed 12 rpm
B Undercarriage overall length 4460
Swing gear Large diameter, internally toothed fully sealed grease bath lubricated.
C Counterweight clearance 1079
D Tail-swing radius 2825
E Width of superstructure 2549 UNDERCARRIAGE
F Height over cab 3060
G Height over grab rail 2780 Construction Fully welded, “X” frame type with track and central bellyguarding and track
motor guards. Sloping sidemembers with dirt relief holes under top rollers.
H Ground clearance 494
Track shoe 600mm / 800mm
I Track gauge 2390 Upper & lower rollers Heat treated, sealed and lubricated
K Width over track (600mm / 800mm) 2990 / 3190 Track adjustment Grease cylinder type
L Transport length 12545 Track idler Sealed and lubricated, with spring cushioned recoil.
M Transport height 3025 LR
No. of track guides 2 per side
N Track height 885
No. of track shoes 49 per side
No. of upper rollers 2 per side
No. of lower rollers 8 per side

WEIGHTS AND GROUND BEARING PRESSURES

Standard machine with bucket, operator, full capacity lubes and fuel.
EXCAVATOR END

MONOBOOM 600mm shoes 800mm shoes 8.7m Monoboom matched to 6.45m dipper length as a standard fitment. Use of Hose Burst Check Valve (HBCV) in boom and
Machine weight kg 22500 23100 dipper cylinder for enhanced safety.
Ground bearing pressure kg/cm2 0.51 0.39

JS200 TRACKED EXCAVATOR 1

 TRACKED EXCAVATOR | JS205 LR

HYDRAULICS CAB

A variable flow load sensing system with flow on demand, variable power output and servo-operated, multi-function open centre Pressed steel construction with high strength rolled sections. Excellent all-round visibility while digging, loading and positioning.
control. Front lower glass is removable and sliding rear window provide ventilation.
Ergonomic positioning of operating levers for reduced operator fatigue.
Pumps
Windscreen wiper, rubber covered track pedals, water bottle and document holder as standard.
Main pumps 2 variable displacement axial piston type.
Additional lights mounted on cab exterior for illumination.
Maximum flow 2 x 220 L/min
Servo pump Gear type
Option
Maximum flow 20 L/min
Fully-ducted air conditioning system and FM radio.
Control valve Cab guards for front and top available as option.
A combined four and five spool control valve with auxiliary service spool as standard. When required twin pump flow is combined
to boom, dipper and bucket services for greater speed and efficiency.

Relief valve settings CONTROLS

Main relief valve 343 bar
Swing circuit 240 bar Excavator All servo lever operated to ISO control pattern
Travel circuit 343 bar Tracks Individually servo operated by foot pedal or hand lever
Pilot control 40 bar Auxiliary Via servo operated foot pedal.
Engine auto-idler Reduces engine speed to low idle depending upon machine utilisation
Cooling Horn Operated via servo lever mounted button
Cooling is provide via a full return line air blast cooler with anti-block wavy fins. Fly mesh prevent clogging of radiator and cooler films.

SERVICE CAPACITIES
TRACK DRIVE
Fuel tank litres 343
Type Fully hydrostatic Engine coolant litres 25.5
Travel motors Axial piston type, fully guarded within undercarriage frame Engine oil litres 19.0
Final drive Planetary reduction, bolt-on sprockets
Hydraulic system litres 203
Service brake Hydraulic counter balance valve to prevent overspeeding on gradients
Hydraulic tank litres 120
Park brake Disc type, spring applied, automatic hydraulic release.
Gradeability 70% (35 deg) continuous. Swing device litres 5
Travel speed High – 3.8 km/h Travel device litres 2x5
Tractive effort 166 kN

FILTRATION
STANDARD EXCAVATING BUCKETS
Hydraulic components are protected to ensure long hydraulic fluid life of up to 5,000 hours (subjected to SOS and recommended
Bucket is JCB type fully welded steel, with sealed, hardened steel pivot pins and replaceable wear parts. maintenance practices).
Bucket width mm 900
In-tank 150 micron; suction strainer
Bucket capacity m3 0.485
Main return line 10 micron; fibre form element
These recommendations are given as a guide based on typical operating conditions. Plexus bypass line 1.5 micron; paper element
Please contact your distributor for the correct selection of buckets and attachments to suit the application. Pilot line 10 micron; paper element
 TRACKED EXCAVATOR | JS205 LR

WORKING RANGE WORKING RANGE

Boom length 8.7m
Dipper length 6.4 m
A Maximum digging reach mm 15600
B Maximum digging reach (on ground) mm 15490
D Maximum digging depth mm 11990
E Maximum digging height mm 12660
F Maximum dumping height mm 10450
G Minimum dumping height mm 3142
H Minimum swing radius mm 1200
I Minimum swing radius height mm 5450
J Maximum ground level span mm 10270
K Minimum swing radius mm 13995
Bucket rotation deg. 182°
Bucket tearout with boost (ISO 6015) kN 57.1
Dipper tearout with boost (ISO 6015) kN 39.8

STANDARD / OPTIONAL EQUIPMENT

Equipment / Tools Standard / Option

Auto Idler Standard
Work lights: 1 each on boom and main frame Standard
Additional lights: 2 units on cab / 1 unit on counterweight Standard
Windscreen wiper Standard
Engine fan guard Standard
Undercarriage belly guard Standard
Superstructure under-cover Standard
Engine pre-cleaner Standard
Double element radial type air cleaner (with wire mesh protection) Standard
Alternator Standard
Cabin fan Standard
Suspension seat Standard
Cabin floor mat Standard
Rubber covered track pedals Standard
Removable front lower cab glass Standard
Tool kit Standard
Handrail and non-slip walkways Standard
Radiator fly screen Standard
FM radio and USB music player with speakers Option
Fully ducted air conditioning system Option
Cabin guard (Front and top) Option
First aid kit Option
Fire extinguisher Option
 TRACKED EXCAVATOR | JS205 LR

LIFT CAPACITIES - Dipper length: 6.4m, Boom: 8.7m, Trackshoes: 600mm triple grouser. JS205 LR MONO
Reach from Swing Centre
Load Point 3.0 m 4.5 m 6.0 m 7.5 m 9.0 m 10.5 m 12.0 m 13.5 m Max Reach

Height kg kg kg kg kg kg kg kg kg kg kg kg kg kg kg kg kg kg mm
10.5 m 1280* 1280* 11462
9.0 m 1810* 1810* 1230* 1230* 12464
7.5 m 2160* 1900 1200* 1200* 13221
6.0 m 2280* 2280* 2240* 1850 1630* 1420 1210* 1210* 13772
4.5 m 2660* 2660* 2490* 2280 2370* 1770 2180* 1380 1230* 1230* 14143
3.0 m 9210* 9210* 4200* 4200* 3470* 3470* 3020* 2760 2730* 2140 2540* 1680 2130 1330 1270* 1160 14347
1.5 m 3590* 3590* 7320* 6690 5150* 4550 4050* 3340 3410* 2550 2990* 2000 2520 1590 2070 1280 1330* 1120 14392
0m 3610* 3610* 8060* 5980 5920* 4110 4570* 3050 3740 2360 2980 1870 2430 1510 2010 1220 1430* 1100 14278
-1.5 m 4490* 4490* 7640* 5640 6370 3820 4630 2850 3580 2220 2870 1770 2360 1440 1970 1180 1550* 1110 14003
-3.0 m 5610* 5610* 8330* 5520 6210 3680 4490 2720 3470 2120 2790 1700 2310 1390 1890* 1160 1730* 1160 13557
-4.5 m 6900* 6900* 9220* 5530 6150 3630 4420 2660 3420 2070 2760 1670 2290 1380 1990* 1250 12920
-6.0 m 8350* 8350* 8880* 5620 6190 3660 4430 2670 3420 2070 2760 1670 2320 1410 2310 1400 12064
-7.5 m 10050* 10050* 8250* 5800 6300 3760 4500 2730 3480 2120 2830 1740 2690 1660 10935
-9.0 m 10030* 10030* 7230* 6070 5600* 3930 4460* 2870 3550* 2250 3290* 2130 9437
-10.5 m 5580* 5580* 4330* 4220 3390* 2310 7343

LIFT CAPACITIES - Dipper length: 6.4m, Boom: 8.7m, Trackshoes: 800mm triple grouser. JS205 LR MONO
Reach from Swing Centre
Load Point 3.0 m 4.5 m 6.0 m 7.5 m 9.0 m 10.5 m 12.0 m 13.5 m Max Reach

Height kg kg kg kg kg kg kg kg kg kg kg kg kg kg kg kg kg kg mm
10.5 m 1280* 1280* 11462
9.0 m 1810* 1810* 1230* 1230* 12464
7.5 m 2160* 1950 1200* 1200* 13221
6.0 m 2280* 2280* 2240* 1900 1630* 1470 1210* 1210* 13772
4.5 m 2660* 2660* 2490* 2340 2370* 1820 2180* 1430 1230* 1230* 14143
3.0 m 9210* 9210* 4200* 4200* 3470* 3470* 3020* 2840 2730* 2200 2540* 1740 2190 1380 1270* 1210 14347
1.5 m 3590* 3590* 7320* 6860 5150* 4670 4050* 3430 3410* 2620 2990* 2060 2590 1640 2130 1320 1330* 1160 14392
0m 3610* 3610* 8060* 6150 5920* 4220 4570* 3140 3760 2440 3060 1930 2500 1560 2080 1270 1430* 1140 14278
-1.5 m 4490* 4490* 7640* 5810 6460* 3940 4760 2930 3680 2290 2950 1830 2430 1490 2030 1230 1550* 1160 14003
-3.0 m 5610* 5610* 8330* 5690 6380 3790 4620 2810 3570 2190 2880 1760 2380 1440 1890* 1210 1730* 1200 13557
-4.5 m 6900* 6900* 9220* 5700 6330 3740 4550 2750 3520 2140 2840 1730 2360 1430 1990* 1290 12920
-6.0 m 8350* 8350* 8880* 5790 6360 3770 4560 2750 3520 2140 2850 1730 2390 1460 2380 1450 12064
-7.5 m 10050* 10050* 8250* 5970 6300 3870 4630 2820 3580 2190 2920 1800 2770 1710 10935
-9.0 m 10030* 10030* 7230* 6240 5600* 4050 4460* 2960 3550* 2320 3290* 2190 9437
-10.5 m 5580* 5580* 4330* 4340 3390* 3300 7343

Lift capacity front and rear. Notes: 1. Lifting capacities are based on ISO 10567, that is: 75% of minimum tipping load or 87% of hydraulic lift capacity, whichever is the less. Lifting capacities marked* are based on hydraulic capacity.
2. Lift capacities assume that the machine is on firm, level ground and equipped with an approved lifting point.
3. A bucket must be fitted when lifting, the weight of this bucket must be deducted from the above lift capacities.
Lift capacity full circle. 4. Lift capacities may be limited by local regulations. Please refer to your dealer.