SunPower® E-Series: E20-327 | E19-320
SunPower Residential ®
AC Module
Built specifically for use with the SunPower Equinox™ system, the only fully
integrated solution designed, engineered, and warranted by one
manufacturer.
Maximum Power. Minimalist Design.
Industry-leading efficiency means more power and savings
per available space. With fewer modules required and
hidden microinverters, less is truly more.
Highest Lifetime Energy and Savings.
Designed to deliver 60% more energy over 25 years in
real-world conditions like partial shade and high temperatures.1
150%
25-year energy yield per W
140%
130%
And Better. 120%
110%
Up to
60%
100% more
90% lifetime
80% energy
70%
60%
0 5 10 15 20 25
The SunPower® Maxeon® Solar Cell Years of operation
• Enables highest-efficiency
modules available. 2
Best Reliability. Best Warranty.
• Unmatched reliability 3
With more than 25 million modules deployed around
• Patented solid metal foundation
prevents breakage and corrosion the world, SunPower technology is proven to last. That’s
why we stand behind our module and microinverter
with the industry’s best 25-year Combined Power and
Product Warranty, including the highest Power Warranty
in solar.
Warranted module power
100%
98%
Factory-integrated Microinverter 96%
• Simpler, faster installation 94%
92%
• Integrated wire management, 90% 12%
rapid shutdown 88% E-Series and X-Series more
86% power
• Engineered and calibrated by 84%
in year
SunPower for SunPower modules 82%
80%
25
0 5 10 15 20 25
Years of operation
Datasheet
E-Series: E20-327 | E19-320 SunPower® Residential AC Module
AC Electrical Data
Inverter Model: Type E (IQ 7XS) @240 VAC
Peak Output Power 320 VA
Max. Continuous Output Power 315 VA
Nom. (L–L) Voltage/Range (V) 2 240 / 211–264
Max. Continuous Output Current (A) 1.31
Max. Units per 20 A (LL) Branch Circuit 3 12 (single phase)
CEC Weighted Efficiency 97.5%
Nom. Frequency 60 Hz
Extended Frequency Range 47–68 Hz
AC Short Circuit Fault Current Over 3 Cycles 5.8 A rms
Overvoltage Class AC Port III
AC Port Backfeed Current 18 mA
Power Factor Setting 1.0
Power Factor (adjustable) 0.7 lead. / 0.7 lag.
No active phase balancing for three-phase installations
DC Power Data Warranties, Certifications, and Compliance
SPR-E20-327-E-AC SPR-E19-320-E-AC • 25-year limited power warranty
Warranties
• 25-year limited product warranty
Nom. Power 5 (Pnom) 327 W 320 W
• UL 1703
Power Tol. +5/−0% +5/−0%
• UL 1741 / IEEE-1547
Module Efficiency 20.4% 19.9% Certifications
• UL 1741 AC Module (Type 2 fire rated)
and
Temp. Coef. (Power) −0.35%/°C −0.35%/°C • UL 62109-1 / IEC 62109-2
Compliance
• FCC Part 15 Class B
• Three bypass diodes • ICES-0003 Class B
Shade Tol. • Integrated module-level maximum • CAN/CSA-C22.2 NO. 107.1-01
power point tracking
• CA Rule 21 (UL 1741 SA)4
(includes Volt/Var and Reactive Power Priority)
Tested Operating Conditions • UL Listed PV Rapid Shutdown Equipment6
Operating Temp. −40°F to +185°F (−40°C to +85°C)
Enables installation in accordance with:
Max. Ambient Temp. 122°F (50°C)
• NEC 690.6 (AC module)
Wind: 154 psf, 7400 Pa, 754 kg/m² back • NEC 690.12 Rapid Shutdown (inside and outside the array)
Max. Test Load7
Snow: 208 psf, 10000 Pa, 1019 kg/m² front • NEC 690.15 AC Connectors, 690.33(A)–(E)(1)
Wind: 62 psf, 3000 Pa, 305 kg/m² back
Design Load When used with InvisiMount racking and InvisiMount accessories
Snow: 125 psf, 6000 Pa, 611 kg/m² front
(UL 2703):
Impact Resistance 1 inch (25 mm) diameter hail at 52 mph (23 m/s)
• Module grounding and bonding through InvisiMount
• Class A fire rated
Mechanical Data When used with AC module Q Cables and accessories (UL 6703 and
Solar Cells 96 Monocrystalline Maxeon Gen II UL 2238)6 :
• Rated for load break disconnect
High-transmission tempered glass with
Front Glass
anti-reflective coating PID Test Potential-induced degradation free
Environmental Rating Outdoor rated
Frame Class 1 black anodized (highest AAMA rating)
Weight 42.9 lbs (19.5 kg)
Recommended Max.
1.3 in. (33 mm)
Module Spacing
1 SunPower 360 W compared to a conventional module on same-sized arrays (260 W, 16% efficient, approx.
2
1.6 m ), 4% more energy per watt (based on third-party module characterization and PVSim), 0.75%/yr slower
degradation (Campeau, Z. et al. “SunPower Module Degradation Rate,” SunPower white paper, 2013).
2 Based on search of datasheet values from websites of top 10 manufacturers per IHS, as of January 2017.
3 #1 rank in “Fraunhofer PV Durability Initiative for Solar Modules: Part 3.” PVTech Power Magazine, 2015.
Campeau, Z. et al. “SunPower Module Degradation Rate,” SunPower white paper, 2013.
4 Factory set to 1547a-2014 default settings. CA Rule 21 default settings profile set during commissioning.
5 Standard Test Conditions (1000 W/m² irradiance, AM 1.5, 25°C). NREL calibration standard: SOMS current,
LACCS FF and voltage. All DC voltage is fully contained within the module.
6 This product is UL Listed as PVRSE and conforms with NEC 2014 and NEC 2017 690.12; and C22.1-2015
Rule 64-218 Rapid Shutdown of PV Systems, for AC and DC conductors; when installed according to
manufacturer’s instructions.
7 Please read the safety and installation instructions for more information regarding load ratings and
mounting configurations.
See www.sunpower.com/facts for more reference information.
For more details, see extended datasheet www.sunpower.com/datasheets
Specifications included in this datasheet are subject to change without notice.
©2021 SunPower Corporation. All Rights Reserved. SUNPOWER, the
SUNPOWER logo and MAXEON are registered trademarks of SunPower
Corporation in the U.S. and other countries as well. 1-800-SUNPOWER.
Please read the Safety and Installation Instructions for details. 531948 RevD
sunpower.com
