Scribd
Upload
358 views2 pages

Tank Cleaning Solutions for Oil Industry

The Gunclean Toftejorg T-73 is an automatic rotary jet head cleaning machine used for tanks between 5,000-30,000 cubic meters. It provides 360 degree indexed cleaning over time through nozzles that rotate around vertical and horizontal axes, laying down an increasingly dense cleaning pattern over 6 cycles. It is widely used to clean crude oil storage tanks and tankers in accordance with international regulations.

Uploaded by

Samo Spontanost
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
358 views2 pages

Tank Cleaning Solutions for Oil Industry

The Gunclean Toftejorg T-73 is an automatic rotary jet head cleaning machine used for tanks between 5,000-30,000 cubic meters. It provides 360 degree indexed cleaning over time through nozzles that rotate around vertical and horizontal axes, laying down an increasingly dense cleaning pattern over 6 cycles. It is widely used to clean crude oil storage tanks and tankers in accordance with international regulations.

Uploaded by

Samo Spontanost
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

.

ky Gunclean Toftejorg T-73


Tank and hold cleaning machine

The Gunclean Toftejorg T-73 rotary jet head provides 360° indexed
impact cleaning over a defined time period. It is automatic and
represents a guaranteed means of achieving quality assurance from
cleaning tanks.

Application
Storage and transportation tanks between 5,000 and 30,000 m3
(1,300,000 and 8,000,000 US gallons). Used on tankers in oil storage
tanks for Crude Oil Washing. The T-73 is widely used in crude carriers,
VLCC’s and FPSO.

Operation
The flow of the cleaning fluid makes the nozzles perform a geared
rotation around the vertical and horizontal axis. In the first cycle, the
nozzles lay out a coarse pattern on the tank surface. The following
cycles make the pattern gradually more dense until a full pattern is
reached after 6 cycles.

Options
• Inlet flange.
• The choice of nozzle diameters can optimize jet impact length and
flow rate at the desired pressure.
• Nozzle extension available for improved impact and throw length.
• Longer jet lengths using special cleaner head and nozzles.
• Extension pipes.
Specifications
.Retrofit
Materials Bronze
Can be supplied with adaptor flanges or threads to fit existing Weight
extension pipes.
Portable model 22 kg (48.5 lbs)
Regulations Fixed model 24.5 kg (54 lbs)
The equipment fully complies with the IMO regulations and the Lubricate Grease lubricating
requirements of the classification societies. Working pressure 5–12 bar
Capacity 40–93 m3/hour
Ordering information
Max. working temperature 95°C (203°F)
Please specify nozzle size, inlet/guide configuration, connections and
Installation
confirm application suitability.
Fixed Standard flange
Ø 165-PC 125 – 4 x Ø 19 mm (0.75") holes
Minimum required passage See dimension drawings
EMD00025en 0307
Performance data: Horizontal throw length Cleaning time,
Flow rate at static condition complete pattern

Cleaning pattern Dimensions (mm)

First cycle

Full pattern

Alfa Laval is a trademark registered and owned by Alfa Laval Corporate AB.
.

Alfa Laval reserves the right to change specifications without prior notification.

How to contact Alfa Laval


Contact details for all countries
are continually updated on our website.
Please visit www.alfalaval.com to
access the information direct.

You might also like