Scribd
Upload
415 views2 pages

Access Road Repair Safety Procedure

This safe work procedure outlines the requirements for repairing access roads, including potential hazards, required personal protective equipment, personnel involved, tools and equipment used, pre-job safety checks, safe work procedures, emergency response arrangements, and ending operations. It provides guidance on attending safety orientations and briefings, using proper barricades and signage, having certified operators and drivers, keeping unauthorized people away from work areas, and following severe weather notices. The document aims to ensure the safety of workers during access road repair work.

Uploaded by

Sn Ahsan
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
415 views2 pages

Access Road Repair Safety Procedure

This safe work procedure outlines the requirements for repairing access roads, including potential hazards, required personal protective equipment, personnel involved, tools and equipment used, pre-job safety checks, safe work procedures, emergency response arrangements, and ending operations. It provides guidance on attending safety orientations and briefings, using proper barricades and signage, having certified operators and drivers, keeping unauthorized people away from work areas, and following severe weather notices. The document aims to ensure the safety of workers during access road repair work.

Uploaded by

Sn Ahsan
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

SAFE WORK PROCEDURE (SWP) FOR: No-SWP #

Company: National Contracting Company


Prepared by : Gijo Eapen
ACCESS ROAD REPAIR
Reviewed by : Owen Villarino
Approved by: M. Ramesh
SAFE WORK PROCEDURE (SWP) Reference (i.e. Method
Statement, Manufacturers Manual etc.
Issue Date: 05/06/ 2017 Last 18/01/2018 Next Review Date: 28/ 06/ 2018
Reviewed:

DESCRIPTION OF WORK: POTENTIAL HAZARD:


Access Road Repair Vehicle/ Equipment Falling from heights
Struck by moving vehicles
Exposure to severe weather condition (heat, rain and
cold)
Exposure to dust

PERSONAL PROTECTIVE EQUIPMENT (PPE) REQUIRED: TRAINING/REFERENCE/INFORMATION


Safety Helmet, Safety Shoes, Safety Glass ( clear and Safety induction/ safety orientation
dark glasses), Long sleeves shirt, Dust mask Tool box talk briefing
Cover-alls, hand gloves, hi visibility vest Banks man Training

PERSONS INVOLVED TOOLS AND EQUIPMENT USED/INVOLVED:


(Job category and number of personnel): (List of Tools and Equipment):
1 engineer, 1 supervisor, 1 foreman Vehicles, Equipment
10 workers

Pre Job Safety Checks


WORK PERMIT FROM AUTHORITIES, BARRICADES AND WARNING SIGNS, PROPER ACCESS, MATERIAL
ARRANGEMENT, ACCESS AND EGRESS CLEAR FROM OBSTRUCTION, FIREFIGHTING EQUIPMENT,EMERGENCY
TEAM, FIRST AID KIT, COMMUNICATION SYSTEM, PROJECT TECHNICAL SPECIFICATIONS, RISK ASSESSMENT,
VEHICLE AND EQUIPMENT STOP BLOCKS, WORKERS PERSONAL PROTECTIVE EQUIPMENT
HOUSEKEEPING,
Safe Work Procedure to Perform Task
 All workers must attend safety induction orientation prior to be deployed in the site.
 All workers must wear mandatory personal protective equipment
 All workers must attend daily toolbox briefing
 Work permit system must be implemented
 Operators and drivers must have TUV third party certificate and KSA Driver’s license
 Banksman or signal man must be present to guide all vehicles and equipment near the access roads
 Safety signage’s and barricades must be provided in the access roads and tower location
 Vehicles provided shall be suitable for the expected terrain, (all-wheel drive) well maintained and in good
working order.
 All persons not involve in the activity must be kept away
 Drivers shall be certified, competent and trained in off road driving. They shall meet all statutory legal
requirements for employment as drivers.
 All workers must observe severe weather condition notices and act accordingly
 Soil hump must be provided in the side and edges of the access roads especially in mountain areas
 All equipments i.e wheel loader, excavator and bulldozer must have TUV third party certificate
 Perimeter of work location must be barricaded and safety signages posted to prevent unauthorized entry

Emergency Response Arrangements and Response


 Emergency responsible plan are posted on site.
 Emergency contact numbers are well noted
 First aid kit available
 Emergency vehicle must be available in the site
Ending Operations & Clean Up
 Access roads must be closed and safety signs posted to prevent unauthorized entry. Housekeeping is ongoing
activity.

You might also like