Instruments, LLC DTG-6000
Direct Drive Difference
Digital Test Gauge
Features
ä Field Rugged - 4 ½" 300 Series SS case
with safety blow-out protection
ä Safe - Intrinsically safe: design complies
with requirements for use in Class 1, Group
A,B,C and D areas (Approval Pending)
ä Precise Measurements - 0.1% of reading
accuracy for the range of 20-100% of span.
ä Versatile - 9 pressure ranges to 5000 psig..
all ranges feature vacuum to 29.5" Hg
ä Temperature Compensation - accuracy
not de-rated over the range 14-122 deg F.
ä 316 SS Sensors - isolated pressure sensors
are compatible with many corrosive media
ä High Resolution LCD - oversized 0.65"
digits enhance readability in poor lighting
ä Low Power Circuitry - 3AA alkaline
batteries provide for 1500 hours of
continuous operation
ä Data Storage - keypad addressable Hi/Lo
pressure values
ä Field Re-Calibration - Keypad re-
calibratable using acceptable pressure
calibration standards
PRODUCT DESCRIPTION
The DTG-6000 from 3D Instruments, a 4 ½" The DTG-6000 is housed in an electro-polished
Digital Test Gauge, incorporates the ultimate in 300 series SS case with elastomeric seals. All
pressure measurement technology to address the controls including: Power, Zero, Eng. Units and
calibration requirements of current process Hi/Lo are selectable via the Lexan keypad for
monitoring and control devices. reliable operation in adverse weather conditions.
To reduce maintenance, 1500 hour battery life is
Outstanding pressure sensors from 0-15 to 0- provided courtesy of a RISC (Reduced
5000 psi provide accuracy of 0.1% of reading Instruction Set Computer) type microprocessor.
from 20-100% of span. Temperature
compensation circuitry maintains this accuracy The combination of sophisticated precision
over an operating temperature range of 14° to pressure measurement technology, robust design
122°F. Wetted components are 316SS for and a wide array of pressure ranges makes the
compatibility with many process fluids. Digital Test Gauge family of pressure gauges
A 5 digit LCD with 0.65" digits and high the ideal choice to tackle your demanding
contrast provides for superior resolution and pressure monitoring or Test and Calibration
readability. applications.
3D Instruments The “Direct Drive Difference” in Digital
MOUNTING FLANGE OPTIONS DTG-CAL KIT
3D
Instruments
The “Direct
Drive
Difference”
in Digital
GENERAL SPECIFICATIONS FEATURES
Accuracies: 0.1% of reading for 20-100% of Display: Selection of Engr. Units*:
span; 0.02% FS from 0-20% of span and 2% FS 5 digit LCD, 0.65" high PSI, mBar, Bar, kPa, kg/cm ,
2
(FS=14.5 psi) for vacuum region includes all inHg, mmHg, inH2O, mmH2O
variations due to non-linearity, hysteresis, Engr. Unit indication
Low Battery Indicator Battery Icon *not all units enabled for all ranges
repeatability and temp. over the Operating range.
Ranges/Resolutions: Hi/Lo Pressure Icons Power Management:
PSI Resolution Over Pressure (PSI) Auto shut-off after 20 min., if no keys are pressed.
Dead Battery - dashed lines across display Field defeatable
0-15 0.001 100 Case:
0-30 0.001 100 Screen Update Rate:
300 Series Stainless Steel 3x per second
0-100 0.01 200
0-300 0.01 600 Pressure Sensors: Hi/Lo:
0-500 0.01 1000 Media compatibility: media compatible with Capture and query the High and Low pressure
0-1000 0.1 2000 316SS. Display flashes at 110% FS. values
0-2K/3K 0.1 4500 Process Connection: Tare:
0-5000 0.1 7500 0 to 100% FS zero offset capability
1/4" NPT (male) – 316 SS with integral sintered
Environmental: SS filter RS-232 (optional):
Operating range: 14 to 122°F (-10 - 50°C) Special RS-232 cable is required
Dimensions:
Storage range: -4 to 158°F (-20 - 70°C) Mounting Flanges (optional):
Power: 4.8"(W) x 2.46" (D) x 6.09"(L) Front or back 300 Series SS -
3 x AA alkaline batteries deliver 1500 hours Weight: welded on the DTG case
continuous service@68°F. 22 oz (635 gms)
ORDERING INFORMATION
À Á Â Ã Ä
Example: 4 ½" DTG-6000 with 300 Series SS case, 0-3000 psi sensor
no mounting flange, bottom ¼" NPT male fitting: 65514-33B55 65514 – XX B XX XXX
À Product Description: 4 ½" DTG-6000 with 300 Series SS case
Á Pressure Range Codes: (all ranges include vacuum measurement to: 29.5" hg)
15: 0-15 psig 23: 0-100 psig 27: 0-500 psig 32: 0-2000 psig 35: 0-5000 psig
21: 0-30 psig 26: 0-300 psig 29: 0-1000 psig 33: 0-3000 psig
 Process Connection: ¼" NPT male
à Connection Position and Mounting Flange Codes:
15: Flange Front, Bottom Fitting 35: Flange Back, Bottom Fitting 55: Flange None, Bottom Fitting
25: Flange Front, Back Fitting 45: Flange Back, Back Fitting 65: Flange None, Back Fitting
Ä Option Codes: leave blank if no options are required
PNO: DTG-Cal Kit #1 – includes a DTG-6000, Model 8110-300: 0-300 psi Pneumatic Handpump, Hose kit and Series-200
ABS waterproof carrying case
PRO: DTG-Cal Kit #2 – includes a DTG-6000, Model 8111-300: Vacuum/0-300 psi Duplex Handpump, Hose kit and
Series-200 ABS waterproof carrying case
PUO: DTG-Cal Kit #3 – includes a DTG-6000, Model 8112-3000: 0-3000 psi Hydraulic Handpump, Hose kit and Series-200
ABS waterproof carrying case
GCO: NIST traceable Calibration Certificate w/data. A NIST traceable Certificate of Conformance is supplied with each unit.
RAA: Custom RS-232 cable (3D P/N: 4025-0005)
AN ISO 9000
3D Instruments, LLC
15542 Chemical Lane, Huntington Beach, California 92649 USA
Phone: (714) 894-5351 Fax: (714) 895-4309
Internet: http://www.3dinstruments.com E-mail: [email protected]
REGISTERED COMPANY
Printed in USA 3D Digital Test Gauge 3D The “Direct Drive Difference” in Digital No. KT-065 4/01
