Scribd
Upload
1K views1 page

5-1/2" Ht-55 HWDP Performance Data Sheet

This document provides specifications for a 5-1/2 inch HT-55 high-strength wellbore drill pipe. Key details include: 1) The pipe has a nominal outside diameter of 5.5 inches, inside diameter of 4 inches, and wall thickness of 0.75 inches. 2) Mechanical performance ratings include an internal pressure capacity of 29,880 psi and a polar section modulus of 23,528 cubic inches. 3) The tool joint has an outside diameter of 7 inches, tensile strength of 1,244,500 pounds, and maximum make-up torque of 46,500 foot-pounds.

Uploaded by

Janderson Sanchez Castañeda
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
1K views1 page

5-1/2" Ht-55 HWDP Performance Data Sheet

This document provides specifications for a 5-1/2 inch HT-55 high-strength wellbore drill pipe. Key details include: 1) The pipe has a nominal outside diameter of 5.5 inches, inside diameter of 4 inches, and wall thickness of 0.75 inches. 2) Mechanical performance ratings include an internal pressure capacity of 29,880 psi and a polar section modulus of 23,528 cubic inches. 3) The tool joint has an outside diameter of 7 inches, tensile strength of 1,244,500 pounds, and maximum make-up torque of 46,500 foot-pounds.

Uploaded by

Janderson Sanchez Castañeda
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

DOC TITLE: HWDP PERFORMANCE DATA SHEET DOC. NO.

TAS-RT-HWDP-003

REV: NA Page 1 of 1

Pipe Size & Weight: 5.500_55.24_lb/ft


5-1/2" HT-55 HWDP PERFORMANCE DATA SHEET Pipe Grade: 55ksi Integral HWDP
Range: 2
IMPERIAL UNIT Tool Joint: 7.000 OD x 4.000 ID

HWDP DIMENSIONS & MATERIALS HWDP MECHANICAL PERFORMANCES


New NEW
PIPE (Nominal) PIPE (Nominal)

Pipe Outside Diameter (OD) in 5.500 Internal Pressure Capacity psi 29,880
Pipe Inside Diameter (ID) in 4.000 Cross Sectional Area Pipe Body in Sq 11.192
Wall Thickness in 0.750 Polar Section Modulus in Cu 23.528
Calculated Plain End Weight lbs/ft 38.048 Section Modulus in Cu 11.765
Tensile Strength lbs 615,600 Cross Sectional Area OD in Sq 23.758
Torsional Strength ft-lbs 62,200 Cross Sectional Area ID in Sq 12.566
80% Torsional Strength ft-lbs 49,760 Tool Joint / Pipe Body Torsional Ratio 0.803

New New
HWDP TOOL JOINT (Nominal) HWDP ASSEMBLY (Nominal)

Connection Type HT-55 Approx. Length ft 31.00


Material Yield Strength ksi 55 Adjusted Weight lbs/ft 55.24
Outside Diameter (OD) in 7.000
Inside Diameter (ID) in 4.0000 Drift Size in 3.750
Pin Tong Length in 24.000
Box Tong Length in 24.000 Fluid Displacement gal/ft 0.844
Tensile Strength lbs 1,244,500 Fluid Capacity gal/ft 0.653
Torsional Strength ft-lbs 77,500
Max. Make-Up Torque ft-lbs 46,500
Min. Make-up Torque ft-lbs 33,800
Balanced OD in 6.935

Premium properties are calcultated based on uniform Outside Diameter and Wall Thickness
Torque performances are calculated with coefficient of friction factor , 0.08.
API recommends a torstional ratio of 0.8 or greater
The use of the information is based on the readers discrection. No warranty is implied or expressed by Tasman Oil Tools with the use of information ontained herein.
The information contained in this Performance Data Sheet is subject to revision without notice.

EMR/Feb/15

You might also like