X-Band Hub-mount SSPB
50W to 250W
SSPB-2000XTM series
Features
Converts L-Band signal to X-Band frequency
Integrated amplifier with an output power from 50W to 250W
Phase-locked oscillator to external 10MHz reference
High linearity (low intermodulation products)
Weatherproof package
Field-Replaceable Power Supply
Remote Monitor & Control
Protection against thermal runaway and out-of-lock
conditions
Output sample monitoring port
Built-in power supply
Compact packaging
CE Marking
MIL-STD-188-164A latest revision compliant
Overview
TM
The SSPB-2000X series are hub-mount up-converter transmitters,
TM
operating in the X-Band. The SSPB-2000X is an integrated unit,
complete with power supply, phase-locked oscillator, mixer, filter
and cooling mechanism. Intended for outdoor operation, the SSPB-
TM
2000X provides the utmost in convenience and efficiency. Other
SSPB’s are also available for higher powers or for operation at other
up-link frequencies.
The design of these units is based on Advantech Wireless industry
proven reliable solid-state high power amplifiers. Built-in design
features and assembly methods incorporated with efficient Options
combining techniques result in an amplifier with exceptional linearity
and operating efficiency. The use of high efficiency power supply High performance external Receive Reject
and conservative thermal designs contribute to the trouble-free
Filter
operation of the amplifier.
Built-in microprocessor controller provides the capability for serial Internal High Stability 10MHz Reference
port interfaces (RS232/485) for remote monitoring and control. Redundant System
Remote M&C panel (Ethernet port optional)
Application
TM
Redundancy
The SSPB-2000X series convert an L-Band signal to the X-band
frequency. Designed for X-Band satellite up-link applications, the TM
The SSPB-2000X series are available in redundant
SSPB series are available in output power from 10W to 1000W. configuration with single Monitor and Control interface.
TM
The SSPB-2000X series are fully integrated units with 50W to Redundancy kits are required for redundant operation.
250W output power designed for mounting outdoors, near the hub of
an antenna.
Advantech Wireless SSPB product line includes variety of units
operating in various satellite band frequencies with full range of
output power levels. Please contact Advantech Wireless for
additional information.
[Link]
X-Band Hub-mount SSPB
Technical Specifications 50W 60W 80W 100W 125W 150W 200W 250W
Electrical Characteristics
Output power (PSAT) +47 +48 +49 +50 +51 +52 +53 +54
dBm dBm dBm dBm dBm dBm dBm dBm
Output power (P1dB) min +46 +47 +48 +49 +50 + 51 +52 +53
dBm dBm dBm dBm dBm dBm dBm dBm
Conversion gain @ maximum setting
67 dB 68 dB 69 dB 70 dB 71 dB 72 dB 73 dB 74 dB
at ambient temperature
L-Band input frequency 950 - 1450 MHz
RF Output frequency 7.9 – 8.4 GHz
Max input power without damage +10 dBm
Gain flatness ± 2.0 dB max full band, 0.3 dB/10 MHz
Gain variation over temperature 3.0 dB p-p max -30C to +55C
Gain adjustment range 20 dB
Input return loss 18 dB, min
Output return loss 20 dB, min
Noise Power Density -70dBm/Hz in TX band, -110 dBm/Hz in RX band
Spurious at rated power -60 dBc, max
Harmonics at rated power -75 dBc, max
AM/PM conversion 2.5/dB typical (at P1dB)
Third order IMD (2 tones) -24 dBc, max at 3 dB back-off from P1dB
Local Oscillator frequency (LO) 6.950 GHz
LO leakage -20 dBm
Phase noise* -60 dBc/Hz at 10Hz -73 dBc/Hz at 1000Hz -93 dBc/Hz at 100 kHz
-63 dBc/Hz at 100Hz -83 dBc/Hz at 10 kHz -110 dBc/Hz at 1 MHz
Group Delay Linear 0.02 ns /MHz, max
2
(over any 40 MHz): Parabolic 0.003 ns/MHz , max
Ripple 1 nsec p-p, max
External reference
Reference frequency 10 MHz
Reference frequency phase noise -115 dBc/Hz at 10 Hz -150 dBc/Hz at 10 kHz
-135 dBc/Hz at 100 Hz -160 dBc/Hz at 100 kHz
-148 dBc/Hz at 1000 Hz
Reference frequency level 0 dBm ± 5 dB
(For 1:1 redundant operation, internal 10MHz reference is recommended)
Power Requirements
AC input voltage 110/220 VAC (47-63 Hz) auto ranging
Power consumption (nominal) 550W 600W 700W 800W 1000W 1250W 1500W 1600W
Mechanical Characteristics
Dimensions (L x W x H) 18.50"x 9.80" x 9.56" (46.99 x 254.9 x 24.28 cm)
Weight 44 lbs (20 Kg)
Interfaces: RF input Type N (F) Redundancy MS3112E16- RF output CPR-112G
Relay port MS3112E12-10P 26P
AC Line MS3102R16-10P RS-232 MS3112E10-6P
RS-485 MS3112E10-6P
Environmental Conditions
Temperature: Operating -30C to +55C; Option 1: -40C to +55C; Option 2: -50C to +50C
Storage -55C to +85C
Humidity 100%, condensing (2" rain/hour)
Altitude 10,000' AMSL, de-rated 2°C/1,000' from AMSL
* Based on internal 10MHz Reference.
NORTH AMERICA EUROPE SOUTH AMERICA An ISO 9001 : 2008 Company
USA UNITED KINGDOM Tel: +1 514 420 0045
Tel: +1 703 659 9796 Tel: +44 1480 357 600 Fax: +1 514 420 0073
Fax: +1 703 635 2212 Fax: +44 1480 357 601 [Link]@[Link]
[Link]@[Link] [Link]@[Link]
RUSSIA & CIS BRAZIL
CANADA Tel: +7 495 971 59 18 Tel: +55 11 3054 5701
Tel: +1 514 420 0045 [Link]@[Link] Fax: +55 11 3054 5701
Fax: +1 514 420 0073 [Link]@[Link] Ref.: PB-SSPB-X-50-250-13150
[Link]@[Link] INDIA
Tel: +91 33 2415 5922
[Link]@[Link]
[Link] Specifications are subject to change without prior notice
