AMARI LTE Callbox: The Portable LTE Network
AMARI LTE Callbox: The Portable LTE Network
IMS Server
5GC/EPC
eMBMS server
gNodeB/eNodeB
LINUX
1 SDR cards Intel Core i3
Easy Configuration
Easy configuration thanks to JSON files with example configurations already
included in each software release for eNodeB, gNodeB, EPC and 5GC.
Channel Simulation
Simulation of different DL channel types as per 3GPP models specified in
36101 specification
Test Features
Test features allowing to override the nominal protocol behavior in order to
simulate error cases.
High Performance
● Highly optimized software supporting hundreds of UEs.
● High data rates supporting downlink and uplink rates of 200 Mbps and
75 Mbps.
Frequency Agnostic
Support of all FDD and TDD frequency bands even non standard ones to
test custom frequencies in sub-6GHz.
3GPP Features
Early access to 3GPP features for rapid validation of features under
development.
Power supply voltage Input:100 - 240V AC RF Coverage 500 MHz to 6.0 GHz
Output: 19.5V/9.23A
180W Adapter
CPU Intel Core i3 RF bandwidth 200 KHz to 56 MHz
MIMO DL 2x2
Frequency bands All FDD and TDD bands with support of custom frequencies
Bandwidth Up to 20 MHz
Supported modes SA
Σ(Bi*Li) 40
Bi is the bandwidth in MHz of cell i Li is the number of dl MIMO layer for cell i
Configuration examples
4G LTE 20MHz 2x2
QoS Support of all LTE QCIs as well TFT and dedicated bearers
CIoT features control plane CIoT optimization, Non IP data delivery, Attach without PDN
connectivity
Security features MD5, AKAv1 and AKAv2 for authentication and IPSec at transport level
Services Voice call, Video call, Voice echo test, Call hold, SMS over SIP and SMS over SG