Scribd
Upload
638 views5 pages

Test Call of NHR-1500

This document provides instructions for sending and receiving test calls via DSC messaging on a marine radio: 1. To send a test call, select the test message type, enter the MMSI of the recipient, and click call. The screen will display status as it waits for acknowledgment. 2. When acknowledgment is received, an audio alarm will sound and a popup message will appear. Click to silence the alarm and erase the message. 3. To receive a test call, the radio will automatically send an acknowledgment if set to do so, or the user can manually accept or hold the call via on-screen options after the alarm sounds.

Uploaded by

Nsr Marine
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
638 views5 pages

Test Call of NHR-1500

This document provides instructions for sending and receiving test calls via DSC messaging on a marine radio: 1. To send a test call, select the test message type, enter the MMSI of the recipient, and click call. The screen will display status as it waits for acknowledgment. 2. When acknowledgment is received, an audio alarm will sound and a popup message will appear. Click to silence the alarm and erase the message. 3. To receive a test call, the radio will automatically send an acknowledgment if set to do so, or the user can manually accept or hold the call via on-screen options after the alarm sounds.

Uploaded by

Nsr Marine
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 5

Test Call

4.3.5.1 Send a test call

(1) Click the [DSC MSG] key, or click the [MENU] key and choose [DSC] – [MESSAGE], then
click [GENERAL MESSAGE] in [MESSAGE].

(2) Click [MSG TYPE] or rotate the PUSH TO ENTER knob to select [MSG TYPE] then push
the knob, select [TEST].

(3) Click [TO], enter the MMSI that where to send the position call in [INPUT], then click OK to
confirm.
(4) Click [CALL] to send test call. The screen changes as below.

(5) After the call has been sent, the [WAIT ACK] screen appears as below. The elapsed time
since sending the call is displayed.
(6) When you receive an acknowledge message, the audio alarm sounds and a popup message
appears.

(7) Click the CLICK key to silence the audio alarm and erase the pop-up message.

(8) Click [OPTION], select [QUIT] to back to SSB screen..

4.3.5.2 Receive a test call


⚫ Automatic acknowledge
When a test call is received with [AUTO] setting on [TEST] of the [ACK SETTING] menu, an
acknowledgement is sent automatically.

⚫ Manual reply

When you receive a test call, the audio alarm sounds. The icon ( ) appears in the tab area, and
the pop-up message "RECEIVED A DSC MESSAGE TEST" appears.
(1) To silence the audio alarm, click the CLICK key.

(2) Click [OPTION], choose one of the operations: [Hold], [Quit] or [Accept].
If you click [Accept], the test acknowledgement is sending.

You might also like