Scribd
Upload
63 views1 page

The Feed Specifications Are As Follows: Table 2.4.2 Design Feed Specifications

This document provides specifications for various feed streams including densities, distillation characteristics, sulfur and nitrogen content, aromatics levels, and other properties. Key details include density ranges from 807.1 to 934 kg/m3, initial boiling points of 144 to 266 degrees C, sulfur content from 0.037 to 3.05% by weight, total aromatics from 9.22 to 58.9% by volume, and pour points from -57 to 12 degrees C. Metals levels are specified to be less than 1 ppmw for nickel, vanadium, iron, copper, arsenic and lead.

Uploaded by

Ritesh Dev Maity
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
63 views1 page

The Feed Specifications Are As Follows: Table 2.4.2 Design Feed Specifications

This document provides specifications for various feed streams including densities, distillation characteristics, sulfur and nitrogen content, aromatics levels, and other properties. Key details include density ranges from 807.1 to 934 kg/m3, initial boiling points of 144 to 266 degrees C, sulfur content from 0.037 to 3.05% by weight, total aromatics from 9.22 to 58.9% by volume, and pour points from -57 to 12 degrees C. Metals levels are specified to be less than 1 ppmw for nickel, vanadium, iron, copper, arsenic and lead.

Uploaded by

Ritesh Dev Maity
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Project N° Unit Doc. type Material Code Serial N° Rev.

0934 201 ML 0000 001 00

The feed specifications are as follows:

Table 2.4.2 Design Feed Specifications

Feed SKO SKO GO- GO- VD- VD- HCN LCO LC


UOM
Stream HS LS HS LS HS LS GO
Density at
863. 851. 887. 842.
15 oC, 817 807.1 876.2 934 868.5
6 4 6 6
kg/m3
ASTM D86, C
Distillation,
Vol%
IBP 144 144 199 167 266 273 153 198 152
5% 156 153 231 224 280 280 158 215 -
10% 160 162 245 242 287 290 161 222 178
30% - - - - - - - 254 227
50% 188 193 270 290 318 308 175 272 285
70% - - - - - - - 313 310
90% 233 239 346 339 356 349 215 362 360
95% 243 253 372 370 367 368 232 384 378
FBP 265 272 381 382 379 376 243 400 395
Sulfur % wt 0.55 0.037 2.0 0.35 2.52 0.479 0.3 2.64 3.05
Total ppmw
25 58 225 306 261 396 100 800 1305
Nitrogen
Basic ppmw
9.7 43.1 108 - - - - -
Nitrogen
Bromine g/100
1.5 - - - 22.4 11.1 26.0
No. g
Total % vol
9.22 19.9 32.4 30 13.4 18.7 58.9 56 35.7
Aromatics
Pour point C 6
-57 -57 -6 -12 12 12 -15 -9
max.
Cetane D-
Index 4737 35.4 40.8 46.3 52.4 46.7 51 23.2 28.3 40.7
(Note-3)
Flash point, C 30.0 30.0 >60 >60 >80 >80 23.0 48 45
Abel
Metals (Ni, ppmw
V, Fe, Cu, <1.0 <1.0 <1.0 <1.0 <1.0 <1.0 <1.0 <1.0 <1.0
As, Pb)
Arsenic, ppmw
0.01 0.01 0.1 0.1 0.01 0.01 0.01 0.01 0.01
max.
Silicon ppmw Trac
- - - - - - - 1.5
es

This document developed by TECHNIP India Limited and the information it contains are property of Indian Oil Corporation Ltd. Page 21 of 198
It shall not be used for any purpose other than for which it was supplied.

CONFIDENTIAL Not to disclose without Authorization

You might also like