SINGLE MODE
OPTICAL FIBER CABLE SPECIFICATION
(GYTS53)
No. FT-S20103
Version: A-2
Issued: Sept. 08, 2020
(ITU-T Rec. G.652.D)
FUTONG GROUP COMMUNICATION TECHNOLOGY (THAILAND) CO., LTD.
All Right Reserved
Add: No.7/324, Moo 6, T.Mabyangporn A.Pluakdaeng, Rayong 21140 Thailand
Tel.: +66 (0) 38 027 412; Fax: +66 (0) 38 027 411
www.futonggroup.com.cn
2020 ©Copyright. Specifications subject to change without notice.
Cable Spec.: FT-S20103A-2
Issued: 2020-09-08
Product: GYTS53
1. General
1.1 The specification covers the construction and properties of optical fiber cable.
1.2 The cable shall be used for direct buried installation.
1.3 The cable generally meets any latest relevant IEC, ITU-T Recommendation or better.
1.4 The fiber shall operate in 1310nm and 1550nm.
1.5 The cable could serve for more than 25 years without any significant deterioration.
2. Cross Section of Cable
© 2020, Futong Group, All rights reserved ~1~
Cable Spec.: FT-S20103A-2
Issued: 2020-09-08
Product: GYTS53
3. Optical Fiber in the Cable
3.1 Construction
Fiber Type Single mode type ITU-T G.652.D
Material Ge doped fused silica
Mode field diameter 1310 nm 9.2±0.4 μm
1550 nm 10.4±0.8 μm
Core concentricity error ≤ 0.6μm
Cladding diameter 125±1μm
Cladding non-circularity ≤ 1.0%
Coating Material UV curable acrylic
Diameter 250±15μm(Colored)
3.2 Optical characteristics
Attenuation 1310 nm ≤ 0.35 dB/km
1490 nm ≤ 0.24 dB/km
1550 nm ≤ 0.22 dB/km
Zero-dispersion Wavelength 1300~1324 nm
Zero-dispersion slope ≤0.090ps/(nm2/km )
Chromatic Dispersion Coefficient 1310 nm ≤ 3.5 (ps/nm.km)
1550 nm ≤ 18(ps/nm.km)
Cable Cut-off Wavelength (λcc) ≤ 1260nm
Polarization Mode Dispersion(PMD) ≤ 0.1 ps/km1/2
Micro bend Attenuation 1550 nm ≤ 0.05 dB
© 2020, Futong Group, All rights reserved ~2~
Cable Spec.: FT-S20103A-2
Issued: 2020-09-08
Product: GYTS53
4. Optical Cable
4.1 Construction
Cable Type GYTS53
Number of Fibers 4,12,24,48,96
Fiber Construction Consult 3.1
Steel Wire
Central Strength Material
(with PE coating if necessary)
Member
Diameter 2.3~3.0 mm
Filling compound Material Water Blocking Jelly
Material PBT
Tube Filling Compound Material Fiber Jelly
Diameter 1.9~2.2 mm
Filler Material PP
Ripcord No. 1
Corrugated steel Tape coated with
Material
Armor ① polymer on both sides
Thickness Nom. 0.25 mm
Material PE（Black）
Inner Sheath
Thickness Min. 1.0 mm
Ripcord No. 1
Corrugated steel Tape coated with
Material
Armor ② polymer on both sides
Thickness Nom. 0.25 mm
Material HDPE（Black）
Outer Sheath
Thickness Min. 1.8 mm
4.2 Buffer Tube Stranding, cable diameter
Fiber Fiber number Number of Nom. Diameter Cable Weight
count per tube tube / filler (mm) (kg/km)
4 4 1/5 13.8~15.0 230~260
12 4 3/3 13.8~15.0 230~260
24 4 6/0 13.8~15.0 230~260
48 12 4/2 13.8~15.0 230~260
96 12 8/0 14.5~17.0 280~330
4.3 Identification
Color Code for Fiber and Tube
No. 1 2 3 4 5 6
Color Blue Orange Green Brown Slate White
No. 7 8 9 10 11 12
Color Red Black Yellow Violet Rose Aqua
© 2020, Futong Group, All rights reserved ~3~
Cable Spec.: FT-S20103A-2
Issued: 2020-09-08
Product: GYTS53
5. Optical Fiber Cable Characteristics
Item Test Condition Specification at 1550nm
IEC 60794-1-2-E1
(after test)
Tensile Mandrel diameter: ≥30 x cable diameter
Attenuation change ≤0.1 dB
Loading Load : 3,000 N
No fiber break and no sheath damage
Hold time: 5 minutes
IEC 60794-1-2-E3
Load : 3000N/100mm Attenuation change ≤0.1 dB
Crush
Loading time: 5 minutes No fiber break and no cable damage
(one point and one time )
IEC 60794-1-2-E4
Impact energy: 5 N.m Attenuation change ≤0.1 dB
Impact
Radius of hammer head:12.5mm No fiber break and no cable damage
No. of impacts : 3 points (1 time/point)
IEC 60794-1-2-E6
Mandrel radius: 20 x cable diameter
Repeat Attenuation change ≤0.1 dB
Load: 50N
Bending No fiber break and no cable damage
Bending angle : ±90
No. of cycles : 25
IEC 60794-1-2-E7
Load: 50N Attenuation change ≤0.1 dB
Torsion/Twist
Length : 1 m No fiber break and no cable damage
Twist angle : ±90
IEC 60794-1-2-F1
Temperature Temperature: -10 to +70℃ Attenuation change ≤0.1 dB/km
Cycling No. of cycles : 1 No fiber break and no cable damage
Soak time: 12 hours
IEC-794-1-2-E14
Sample length: 30 cm
Drip test No filling compound drip
Temp: 65 ±5°C
Time: 24 h
IEC 60794-1-2-F5
Water Head of water : 1 m
No water leakage at end of cable
Penetration Test time : 24 hours
Sample length: 3 m
© 2020, Futong Group, All rights reserved ~4~
Cable Spec.: FT-S20103A-2
Issued: 2020-09-08
Product: GYTS53
6. Cable sheath Marking
Marking Color：White
Interval：1m
Contents(for example)：
FUTONG GYTS53 **F G652D 20** ****M
Explain:
FUTONG : The name of manufacturer.
GYTS53 : The name of cable.
**F : Fiber counts
G652D: the type of fiber,
20**: The year of manufacture
****M :Length marking ,starting number is 0000M
※The sheath marking can be changed with customer’s requirement.
7.Packing and shipping
7.1 Cable Drum: Wooded drum ;
Standard reel length：2000m/reel（or according to customer’s requirement.）
7.2 Labeling
The direction of rotation of the color scheme is shown by making the clockwise and anti-
clockwise ends with red and green adhesive tape respectively
The markings are on both sides of the flanges as follows(for example)：
FUTONG
Cable type/Size
Cable length
Cable Weight
Shipping mark
※Can be changed with customer’s requirement.
----------END OF SPECIFICATION ----------
© 2020, Futong Group, All rights reserved ~5~
