Scribd
Upload
43 views1 page

Genuine Viton A 70-Compound 514641 - Technical Data Sheet: Test Method Norm Test Values

This document provides technical data on a genuine Viton compound material. It details the chemical composition, physical properties including hardness and tensile strength, temperature and chemical resistance ranges. The material is formulated to FDA compliance for use in contact with foods.

Uploaded by

azadeaz
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
43 views1 page

Genuine Viton A 70-Compound 514641 - Technical Data Sheet: Test Method Norm Test Values

This document provides technical data on a genuine Viton compound material. It details the chemical composition, physical properties including hardness and tensile strength, temperature and chemical resistance ranges. The material is formulated to FDA compliance for use in contact with foods.

Uploaded by

azadeaz
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Sealing elements

Genuine Viton ® A 70-compound 514641 - Technical Data Sheet

1. Introduction
Original Viton® 514641-compound is based on a 100% Genuine Viton® polymer. Products
out of this compound are being made according to strict guidelines of DuPont Performance
Elastomers. This guarantees a constant high quality level. All products carry the specific,

®
easy recognizable emblem on their package. In conformity with FDA 177.2600.

2. Product Description
Chemical Composition : Copolymer of Hexa-Fluoropropylene and Vinylidene Fuoride,
plus cure chemicals
Physical form : O-Rings / Mouldings / Extrusions / Vulc-O-Rings
Colour : Black
Odour : None
Storage stability * : Excellent

* : Following ISO 2230 conditions

3. Physical Properties

Test Method Norm Test Values


Hardness ASTM D 3340 70 ± 5 IRHD
Tensile Strength at break ISO 37 10.9 MPa
Elongation at break ISO 37 268%
Specific Weight ISO 2781 2,0
Compression Set ISO 815
22h/200°C, on slab 7,7%
Heat Ageing 70h/250°C ISO 188
Hardness Change +3 IRHD
Tensile Strenght Change +3.7 MPa
Elongation Change - 31%

4. Temperature Resistance 6. Other Information


• -20° to +200°C • This genuine Viton® 514641-compound
• TR10 (low temp. resistance): -16°C is formulated to FDA compliance CFR
Section 177.2600 for acqueous and fatty
foods. This means carbon black
5. Chemical Resistance compound is below 10% class 1.
Concentrated acids : excellent This compound is migration tested in
Acetone : bad compliance with FDA norms by
Hydroxides : excellent independent labs and certificate is
Benzene : excellent available on request.
Crude oil : excellent
Toluene : excellent
Fuel C : excellent
Gasoline : very good
ASTM oil 3 : excellent
Methylene chloride : very good
MEK : bad
MTBE : bad
Water < 100°C : good

This information is, to the best of our knowledge, accurate and reliable to the date indicated. The above mentioned data
have been obtained by tests we consider as reliable. We don’t assure that the same results can be obtained in other 12.01.2010
laboratories, using different conditions by the preparation and evaluation of the samples. ­82

You might also like