GATE VALVES

TABLE OF CONTENT

COMPANY PROFILE

The company ARMATURY Group a.s. is a leading Czech manufacturer and distributor of industrial
valves, fittings and control systems for valves. The annual production is of more than 100 000 valves
and 500 000 metallurgical stock items.

The company was established January 1, 2000. The tradition of our dynamically developing company
is closely linked with the more than fifty-years’ history of valve production in the Hlučín Region.

Our products have been supplied to local and foreign customers

for the following industries:
• power engineering, nuclear power
• chemical and petrochemical
• gas supply
• metallurgical industry
• water supply
OCELOVÁ ŠOUPÁTKA

CONTENT

Gate valves acc. to EN

Type S33.1 .....................................................................................5
Type S33.2......................................................................................8
Type S33.3................................................................................... 10
Type S33.4 .................................................................................. 12
Type S33.C .................................................................................. 15
Type S43.1 .................................................................................. 17
Type S43.3................................................................................... 18
Type S43.5................................................................................... 19
Type S43.C .................................................................................. 20
Gate valves acc. to ASME
Type S33.1................................................................................... 21
Type S43.1................................................................................... 26
Type S43.5................................................................................... 28
Table of pressure-temperature ratings............................. 30
Certification................................................................................ 33
Type number composition .................................................. 34
 GATE VALVES TYPE S33

Application
Gate valves are isolating valves designed for full closing or opening
of working media flow. If the gate valves are used for regulating
or throttling purposes, the manufacturer does not guarantee
tightness of the gate valves. For regulation we recommend to use
special control gate valve type S33.C.

Working medium
water
non-corrosive liquids
steam
air
gases of group 1 and 2
petroleum and petroleum products
The service fluids shall not contain rough impurities.

Technical description
The gate valve is an outside-screw-and-yoke, full bore with flexible
wedge and rising stem. The body and the bonnet are made
of castings and are connected by a  flanged joint. The seating
surfaces of the seats and the wedge are made in compliance with
API 600. The seat rings are welded into the body. The gate valves
are equipped with a back seat. The gate valves are a bi-directional
sealing valves. The body-bonnet joint and the packing chamber Accessories
are sealed with asbestos-free gasket and packing which guarantee The gate valves can be equipped with the following accessories:
a long life service. The requirement for an automatic body cavity drain valve,
pressure relief shall be specified in the purchase order. Pressure air-vent valve,
relief can be achieved by: by-pass valves,
drilling a hole through one disc of the wedge, stand for remote control, including chains and chain wheels,
special valve incorporated into the wedge, vent plugs,
external bypass, gland pcking „live loading“.
use of solid wedge.
TA-Luft design on request. Testing
The gate valves are subjected to the following tests performed with
Connection to the piping water:
 anged ends - acc. to EN 1092-1or GOST, face-to-face
fl shell strength test
dimensions are acc. to EN 558, Series 14, 15 and 26 or GOST shell tightness test
w
 elded ends - acc. to EN 12627 seat tightness test and operability test according to EN 12266.
other tests by agreement.
Operation
The gate valves are delivered with a  handwheel, a  manual bevel Installation
gear, an electric actuator or bare stem ready for connection to The gate valves may be installed into the piping in vertical or
an actuator. The standard connecting dimensions for connection horizontal position. In case of gate valves equipped with an electric
to a manual gear or an electric actuator meet the requirements of actuator or a pneumatic actuator, must you follow instructions of
ISO 5210. the manufacturer of actuators.

Production range
DN
Type PN
40 50 65 80 100 125 150 200 250 300 350 400 500 600 700 800 900 1000 1100 1200 1300 1400 1600 1800 2000
16 • • • • • • • • • • • • •
25 • • • • • • • • • • • • •
S33.1
40 • • • • • • • • • • • • •
S33.C
63 • • • • • • • • • • • • •
100 • • • • • • • • • • • • •
S33.2 6, 10, 16 • • • • • • • • • • • • • •
S33.3 16 • • • • • • • • • • • • •
2,5 • • • • • • • • • • • • •
6 • • • • • • • • • • • • •
S33.4 10 • • • • • • • • • • •
16 • • • • • • • •
25 • • • • • • • •

4 w w w. ar m atur ygroup. cz
GATE VALVES TYPE S33.1

DN 50-600 • PN 16-100 • Tmax 450 °C (595 °C) Connection: E

 N 1092-1 FLANGED ENDS
Body design: yoke gate valve EN 12 627 WELDED ENDS
Body, bonnet, wedge: cast
Rising stem
Flexible wedge

11
6 9
7 2

10 5

3
4
1

Material acc. to EN
Position Component Carbon steel Alloy steel Carbon steel for low temperatures Stainless steel
1 Body 1.0619 1.7357 1.6220 1.4408
2 Bonnet 1.0619 1.7357 1.6220 1.4408
3 Wedge + overlay 1.0619 + 13Cr 1.7357 + Stellite 6 1.6220 + F304 1.4408
4 Seat + overlay 1.0460 + 13Cr 1.7335 + Stellite 6 1.0566 + Stellite 6 1.4401
5 Stem 1.4021 1.4923 1.4301 1.4401
6 Bonnet bolts* 1.7218* 1.7709* 1.7225* 1.4401*
7 Bonnet nuts* 1.1191* 1.7709* 1.7225* 1.4401*
8 Stem nut Ni-rezist, Al-bronze
9 Back seat 1.4006 + Hard facing 1.4301 + Hard facing 1.4401 + Hard facing
10 Gasket Graphite with stainless steel insert
11 Packing Pressed graphite

* equivalent or according to customer’s request

www.armaturygroup.cz
w w w. ar m atur ygroup. cz 5
 GATE VALVES TYPE S33.1

DN 50-600 • PN 16-100 • Tmax 450 °C (595 °C) Connection: E

 N 1092-1 FLANGED ENDS
Body design: yoke gate valve EN 12 627 WELDED ENDS

PN 16

BW
DN D1 D2 D3 L H (open) Dk b dxn kg
L1 kg
50 165 125 102 250 360 200 18 18x4 20 216 17
65 185 145 122 270 410 250 18 18x8 30 241 26
80 200 160 138 280 460 250 20 18x8 36 283 34
100 220 180 158 300 550 300 20 18x8 49 305 48
125 250 210 188 325 660 300 22 18x8 66 381 72
150 285 240 212 350 775 300 22 22x8 95 404 100
200 340 295 268 400 960 350 24 22x12 154 419 160
250 405 355 320 450 1175 400 26 26x12 225 457 240
300 460 410 378 500 1360 500 28 26x12 334 502 355
350 520 470 438 550 1525 550 30 26x16 445 762 490
400 580 525 490 600 1675 600 32 30x16 610 838 690
500 715 650 610 700 2050 700 44 33x20 1105 991 1070
600 840 770 725 800 2400 800 54 36x20 1190 1143 1660

PN 25
BW
DN D1 D2 D3 L H (open) Dk b dxn kg
L1 kg
50 165 125 102 250 360 200 20 18x4 20 216 17
65 185 145 122 270 410 250 22 18x8 32 241 26
80 200 160 138 280 460 250 24 18x8 39 283 34
100 235 190 162 300 550 300 24 22x8 53 305 48
125 270 220 188 325 660 300 26 26x8 71 381 72
150 300 250 218 350 775 300 28 26x8 101 404 100
200 360 310 278 400 960 350 30 26x12 160 419 160
250 425 370 335 450 1175 400 32 30x12 232 457 240
300 485 430 395 500 1360 500 34 30x16 345 502 355
350 555 490 450 550 1525 550 38 33x16 460 762 490
400 620 550 505 600 1675 600 40 36x16 645 838 690
500 730 660 615 700 2050 700 48 36x20 1166 991 1070
600 845 770 720 800 2450 800 58 39x20 1258 1143 1660

6 w w w. ar m atur ygroup. cz
GATE VALVES TYPE S33.1

DN 50-600 • PN 16-100 • Tmax 450 °C (595 °C) Connection: E

 N 1092-1 FLANGED ENDS
Body design: yoke gate valve EN 12 627 WELDED ENDS

PN 40
BW
DN D1 D2 D3 L H (open) Dk b dxn kg
L1 kg
50 165 125 102 250 360 200 20 18x4 20 216 17
65 185 145 122 290 410 250 22 18x8 28 241 26
80 200 160 138 310 460 250 24 18x8 44 283 34
100 235 190 162 350 560 300 24 22x8 62 305 48
125 270 220 188 400 660 300 26 26x8 87 381 72
150 300 250 218 450 765 350 28 26x8 125 404 100
200 375 320 285 550 955 400 34 30x12 265 419 160
250 450 385 345 650 1185 450 38 33x12 405 457 240
300 515 450 410 750 1380 500 42 33x16 500 502 355
350 580 510 465 850 1510 500 46 36x16 725 762 490
400 660 585 535 950 1690 600 50 39x16 1280 838 690
500 755 670 615 1150 2065 600 52 42x20 1589 991 1070
600 890 795 735 1350 2465 700 60 48x20 1903 1143 1660

PN 63
BW
DN D1 D2 D3 L H (open) Dk b dxn kg
L1 kg
50 180 135 102 250 420 280 26 22x4 37 292 28
65 205 160 122 290 470 280 26 22x8 46 330 37
80 215 170 138 310 525 300 28 22x8 49 356 38
100 250 200 162 350 620 350 30 26x8 86 432 75
125 295 240 188 400 715 350 34 30x8 129 508 113
150 345 280 218 450 815 400 36 33x8 150 559 132
200 415 345 285 550 1115 500 42 36x12 360 660 320
250 470 400 345 650 1280 640 46 36x12 570 787 500
300 530 460 410 750 1550 680 52 36x16 815 838 720
350 600 525 465 850 1665 - 56 39x16 1080 889 950
400 670 585 535 950 1820 - 60 42x16 1460 991 1290
500 800 705 615 1150 2235 - 68 48x20 2315 1194 2040
600 930 820 735 1350 2570 - 76 56x20 3480 1397 3060

PN 100
BW
DN D1 D2 D3 L H (open) Dk b dxn kg
L1 kg
50 195 145 102 250 420 280 30 26x4 39 292 29
65 220 170 122 290 470 280 34 26x8 50 330 39
80 230 180 138 310 525 300 36 26x8 54 356 40
100 265 210 162 350 620 350 40 30x8 94 432 80
125 315 250 188 400 715 350 40 33x8 138 508 122
150 355 290 218 450 815 400 44 33x12 160 559 141
200 430 360 285 550 1115 500 52 36x12 385 660 340
250 505 430 345 650 1280 640 60 39x12 610 787 540
300 585 500 410 750 1550 680 68 42x16 890 838 780
350 655 560 465 850 1665 - 74 48x16 1190 889 1050
400 715 620 535 950 1820 - 78 48x16 1570 991 1380
500 870 760 615 1150 2235 - 90 56x20 2630 1194 2315
600 940 838 692 1350 2570 - 105 52x24 3870 1397 3405

www.armaturygroup.cz
w w w. ar m atur ygroup. cz 7
 GATE VALVES TYPE S33.2

DN 40-600 • PN 6-16 • Tmax 450 °C Connection: EN 1092-1 FLANGED ENDS

Body design: yoke gate valve
Body, bonnet: cast
Rising stem
Solid wedge

11

6 5
7 2

10

Material acc. to EN
Position Component Carbon steel Stainless steel
1 Body + overlay 1.0619 + 13Cr 1.4408
2 Bonnet 1.0619 1.4408
3 Wedge + overlay 1.0619 + 13Cr 1.4408
5 Stem 1.4021 1.4401
6 Bonnet bolts* 1.7218* 1.4301*
7 Bonnet nuts* 1.1191* 1.4301*
8 Stem nut Ni-rezist, Al-bronze
10 Gasket Graphite
11 Packing Graphite

* equivalent or according to customer’s request

Buttweld ends on request.

8 w w w. ar m atur ygroup. cz
GATE VALVES TYPE S33.2

DN 40-600 • PN 6-16 • Tmax 450 °C Connection: EN 1092-1 FLANGED ENDS

Body design: yoke gate valve

Dk

Dk
H(open)

H(open)
n
dx
D2 D2
dxn
DN
D1
D3

DN
D1
D3
b
L
b
L
PN 6
DN D1 D2 D3 L H(open) Dk b dxn kg
40 130 100 80 140 340 160 14 14 x 4 14
50 140 110 90 150 405 160 14 14 x 4 16
65 160 130 110 170 480 160 14 14 x 4 18
80 190 150 128 180 510 160 16 18 x 4 23
100 210 170 148 190 600 200 16 18 x 4 36
125 240 200 178 200 640 200 18 18 x 8 48
150 265 225 202 210 785 200 18 18 x 8 60
200 320 280 258 230 980 250 20 18 x 8 97
250 375 335 312 250 1190 320 22 18 x 12 166
300 440 395 365 270 1400 400 22 22 x 12 210
350 490 445 415 290 1585 450 22 22 x 12 345
400 540 495 465 310 1720 500 22 22 x 16 480
500 645 600 570 350 2095 500 24 22 x 20 645
600 755 705 670 390 2680 600 30 26 x 20 895
PN 10
DN D1 D2 D3 L H(open) Dk b dxn kg
40 150 110 88 140 340 200 18 18 x 4 15
50 165 125 102 150 405 200 18 18 x 4 17
65 185 145 122 170 480 200 18 18 x 8 19
80 200 160 138 180 510 250 20 18 x 8 25
100 220 180 158 190 600 280 20 18 x 8 36
125 250 210 188 200 640 300 22 18 x 8 52
150 285 240 212 210 785 300 22 22 x 8 62
200 340 295 268 230 980 350 24 22 x 8 88
250 395 350 320 250 1190 400 26 22 x 12 180
300 445 400 370 270 1400 450 26 22 x 12 230
350 505 460 430 290 1585 500 26 22 x 16 380
400 565 515 482 310 1720 600 26 26 x 16 505
500 670 620 585 350 2095 600 28 26 x 20 700
600 780 725 685 390 2680 600 34 30 x 20 985
PN 16
DN D1 D2 D3 L H(open) Dk b dxn kg
40 150 110 88 170 360 160 18 18 x 4 16
50 165 125 102 180 405 200 18 18 x 4 20
65 185 145 122 200 480 200 18 18 x 8 21
80 200 160 138 210 510 200 20 18 x 8 32
100 220 180 158 230 605 250 20 18 x 8 40
125 250 210 188 255 640 250 22 18 x 8 49
150 285 240 212 280 785 320 22 22 x 8 74
200 340 295 268 330 980 400 24 22 x 12 117
250 405 355 320 450 1015 450 26 26 x 12 210
300 460 410 378 500 1190 500 28 26 x 12 300
350 520 470 438 550 1350 600 30 26 x 16 510
400 580 525 490 600 1460 600 32 30 x 16 670
500 715 650 610 700 1800 700 44 33 x 20 930
600 840 770 725 800 2200 800 54 36 x 20 1310

www.armaturygroup.cz
w w w. ar m atur ygroup. cz 9
 GATE VALVES TYPE S33.3

DN 50-600 • PN 16 • Tmax 250 °C Connection: EN 1092-1 FLANGED ENDS

Body design: bonnet gate valve
Body, bonnet: cast
Non-rising stem

11

6
2
7
5
10

Material acc. to EN
Position Component Carbon steel
1 Body + overlay 1.0619 + 13Cr
2 Bonnet 1.0619
3 Wedge + overlay 1.0619 + 13Cr
5 Stem 1.4021
6 Bonnet bolts* 1.7218 *
7 Bonnet nuts* 1.1191 *
10 Gasket Graphite
11 Packing Graphite

* equivalent or according to customer’s request

10 w w w. ar m atur ygroup. cz
GATE VALVES TYPE S33.3

DN 50-600 • PN 16 • Tmax 250 °C Connection: EN 1092-1 FLANGED ENDS

Body design: bonnet gate valve

Dk
H

dxn
D2

DN
D1
D3

b
L

PN 16
DN D1 D2 D3 L b dxn H* Dk kg
50 165 125 102 180 18 18 x 4 325 200 24
65 185 145 122 200 18 18 x 8 330 200 33
80 200 160 138 210 20 18 x 8 355 200 38
100 220 180 158 230 20 18 x 8 410 200 54
125 250 210 188 255 22 18 x 8 520 250 75
150 285 240 212 280 22 22 x 8 550 250 102
200 340 295 268 330 24 22 x 12 650 300 145
250 405 355 320 450 26 26 x 12 750 350 245
300 460 410 378 500 28 26 x 12 948 550 315
350 520 470 438 550 30 26 x 16 1065 600 380
400 580 525 490 600 32 30 x 16 1234 600 480
450 640 585 550 650 40 30 x 20 1380 680 670
500 715 650 610 700 44 33 x 20 1420 460 815
600 840 770 725 800 54 36 x 20 1625 460 1200

* for information purposes

www.armaturygroup.cz
w w w. ar m atur ygroup. cz 11
 GATE VALVES TYPE S33.4

DN 500-2000 • PN 2,5-25 • Tmax 300°C Connection: E

 N 1092-1 FLANGED ENDS
Body design: yoke gate valve EN 12 627 WELDED ENDS
Body, bonnet: fabricated
Rising stem
Solid wedge

11

6
10
7

Material acc. to EN
Position Component Carbon steel Carbon steel for low temperatures
1 Body + overlay 1.0425 + 13Cr 1.0566 + 13Cr
2 Bonnet 1.0425 1.0566
3 Wedge + overlay 1.0425 + 13Cr 1.0566 + 13Cr
5 Stem 1.4021 1.4021
6 Bonnet bolts* 1.7218* 1.7225*
7 Bonnet nuts* 1.1191* 1.7225*
8 Stem nut A439 D2 (Ni-rezist), Al-bronze
10 Gasket Graphite with stainless steel insert
11 Packing Pressed graphite

* equivalent or according to customer’s request

12 w w w. ar m atur ygroup. cz
GATE VALVES TYPE S33.4

DN 500-2000 • PN 2,5-25 • Tmax 300 °C Connection: E

 N 1092-1 FLANGED ENDS
Body design: yoke gate valve EN 12 627 WELDED ENDS

V3
V2
V3
V2

D2
DN

DN
D3
D1
n
dx
V1

V1

f
A
L2 B a
B A
L1

PN 2,5
kg
DN L1 L2 D1 D2 D3 a n d V1 V2 V3
flanged ends welded ends
500 350 700 645 600 570 29 20 22 540 1758 2410 750 726
600 390 800 755 705 670 30 20 26 560 1996 2757 972 941
700 430 900 860 810 775 30 24 26 565 2248 3285 1290 1249
800 470 1000 975 920 880 30 24 30 739 2550 3687 1520 1472
900 510 1100 1075 1020 980 32 28 30 790 2860 3800 1820 1805
1000 550 1200 1175 1120 1080 32 28 30 830 2998 4335 2180 2111
1100 590 1300 1275 1220 1180 35 32 30 965 3289 4510 2560 2510
1200 630 1400 1375 1320 1280 35 32 30 940 3568 5137 2950 2856
1300 670 1400 1470 1420 1380 38 32 30 980 3910 5590 3560
1400 710 1400 1575 1520 1480 40 36 30 1054 4210 5892 3910
1600 790 1400 1790 1730 1690 43 40 30 1155 4683 6691 5445
1800 870 1400 1990 1930 1890 50 44 30 1300 5000 7225 7900
2000 950 1400 2190 2130 2090 55 48 30 1380 5720 7845 9420

www.armaturygroup.cz
w w w. ar m atur ygroup. cz 13
 GATE VALVES TYPE S33.4

DN 500-2000 • PN 2,5-25 • Tmax 300 °C Connection: E

 N 1092-1 FLANGED ENDS
Body design: yoke gate valve EN 12 627 WELDED ENDS

PN 6
kg
DN L1 L2 D1 D2 D3 a n d V1 V2 V3
flanged ends welded ends
500 350 700 645 600 570 29 20 22 510 1746 2410 810 784
600 390 800 755 705 670 30 20 26 620 1996 2757 980 949
700 430 900 860 810 775 30 24 26 670 2338 3285 1315 1273
800 470 1000 975 920 880 30 24 30 730 2488 3687 1550 1501
900 510 1100 1075 1020 980 38 28 30 790 2860 3800 1850 1802
1000 550 1200 1175 1120 1080 38 28 30 830 2998 4335 2210 2140
1100 590 1300 1290 1230 1190 40 32 30 965 3289 4510 2670 2560
1200 630 1400 1405 1340 1295 45 32 33 940 3568 5137 3162 3061
1300 670 1400 1520 1450 1405 45 32 33 980 3910 5590 3820
1400 710 1400 1630 1560 1510 50 36 36 1035 4103 5620 4320
1600 790 1400 1830 1760 1710 50 40 36 1160 4780 6600 5850
1800 870 1400 2045 1970 1920 65 44 39 1300 5000 7225 8120
2000 950 1400 2265 2180 2125 80 48 42 1380 5720 7845 9910

PN 10
kg
DN L1 L2 D1 D2 D3 a n d V1 V2 V3
flanged ends welded ends
500 700 700 670 620 585 34 20 26 510 1746 2410 1480 1433
600 800 800 780 725 685 35 20 30 560 1996 2757 1715 1660
700 900 900 895 810 800 38 24 30 565 2248 3317 2020 1956
800 1000 1000 1015 950 905 48 24 33 739 2550 3719 2238 2167
900 1100 1100 1115 1050 1005 53 28 33 780 2788 3824 2550 2452
1000 1200 1200 1230 1160 1110 63 28 36 830 3032 4440 3100 3001
1100 1300 1300 1345 1270 1220 73 28 36 965 3289 4510 3370
1200 1400 1400 1455 1380 1330 78 32 39 940 3568 5137 3850
1300 1400 1400 1565 1485 1435 85 32 39 980 3910 5590 4520
1400 1400 1400 1675 1590 1535 93 36 42 1035 4103 5620 5020
1600 1400 1400 1915 1820 1760 103 40 48 1160 4780 6600 6550

PN 16
kg
DN L1 L2 D1 D2 D3 a n d V1 V2 V3
flanged ends welded ends
500 700 700 715 650 610 42 20 33 510 1746 2410 1510 1462
600 800 800 840 770 725 53 20 36 560 1996 2757 1745 1690
700 900 900 910 840 800 58 24 36 650 2333 3717 2055 1990
800 1000 1000 1025 950 905 63 24 39 739 2550 3719 2285 2212
900 1100 1100 1125 1050 1000 68 28 39 780 2788 3824 2860 2750
1000 1200 1200 1255 1170 1110 83 28 42 840 3032 4440 3200 3098
1100 1300 1300 1370 1280 1220 93 28 42 975 3299 4520 3480
1200 1400 1400 1485 1390 1330 98 32 48 950 3578 5147 4550

PN 25
kg
DN L1 L2 D1 D2 D3 a n d V1 V2 V3
flanged ends welded ends
500 700 700 730 660 615 52 20 36 510 1746 2410 2000 1936
600 800 800 845 770 720 65 20 39 560 1996 2757 2250 2178
700 900 900 960 875 820 73 24 42 565 2248 3356 2550 2469
800 1000 1000 1085 990 930 83 24 48 615 2550 3758 2960 2866
900 1100 1100 1185 1090 1030 83 28 48 749 2560 3729 3560
1000 1200 1200 1320 1210 1140 103 28 56 790 2798 3834 3950
1100 1300 1300 1425 1315 1245 108 28 56 985 3399 4530 4180
1200 1400 1400 1530 1420 1350 112 32 56 960 3588 5157 5250

* F ISO 5210 form C

14 w w w. ar m atur ygroup. cz
CONTROL GATE VALVES TYPE S33.C

Application
 onventional and nuclear power engineering where a specified
C
shape of the performance characteristic depending on the valve
travel for different flow rates is required.
Gas industry where pipings with different pressures are to be
connected or where gas is to be discharged from the piping
system in a defined way.
Heat production and distribution where a defined quantity of
the fluid is to be fed to the equipment in order to guarantee
performance of the equipment.

Working medium
water
steam
gases
other fluids

Technical description
The control gate valves are valves used to control the flow of
the service fluid which may flow in either direction. The control
gate valves are not isolating valves. The design of control gate
valves is based on the design of conventional gate valves. The Testing
control features of the gate valves are provided by the unique The gate valves are subjected to the following tests performed with
construction of the throttle plate, seats and guides. The throttle water:
plate and the seats are equipped with special holes or grooves shell strength test
that overlap each other during the process of opening so that shell tightness test
the regulating characteristic is guaranteed exactly in accordance seat tightness test and operability test according to EN 12266.
with the customer’s specification. The control gate valves made other tests by agreement.
by ARMATURY Group are designed by means of sophisticated
computer programs and the throttling components of each Connection to the piping
gate valve have holes of different shapes for the performance flanged ends
characteristic of the gate valve to be in full conformance with welding ends
requirements of the customer.
The gate valves are made as cast-type valves. Materials and main Installation
design and face-to-face/end-to-end dimensions are identical to The gate valves can be installed into the piping in any position.
those of gate valves with type designation S33.
Advantages
Operation 
guaranteed metal-to-metal tightness in either flow direction
handwheel low pressure loss which brings power savings of approximately
electric actuator 500 MWh annually in comparison with a DN 150 PN 250 control
pneumatic actuator valve
remote operation use of special sealing material which meets the requirements of
The gate valves can be equipped with a locking device. “Nuclear Spec. D50YP12 Rev. 2”, TA Luft and VDI 2440.

DN 50-600 • PN 16-100 • Tmax 450 °C (595 °C)

Throttle disc with special

hole

www.armaturygroup.cz
w w w. ar m atur ygroup. cz 15
 GATE VALVES TYPE S43

Application
Gate valves are shut-off valves. It is used especially in power
engineering, chemical industry as well as other industries
depending on material selection.

Working medium
water
steam
gas
other fluids

Technical description Operation

The body is a forging into which a flexible wedge is inserted through manual (hand wheel)
the yoke-type bonnet or through the pressure seal bonnet. The electric actuator
seating surfaces of the wedge are hard faced and proper seating pneumatic actuator
of the wedge is provided for by precision-machined guides in the actuator located out of the valve
body. The seat rings are weld deposited in the body and hard faced Gate valves can be equipped with a locking device.
as well. The bonnet and the stuffing box are sealed with special
graphite gaskets and packing rings. The gate valves can be on Testing
request designed with pressure cavity released system against over The gate valves are subjected to the following tests performed with
pressurizing of body cavity. There is an option of drilling a hole on water:
an input side of the disc, using diaphragm or safety valve or making shell strength test
a by-pass. Also upon request, the gate valve can be equipped with shell tightness test
one to three bypass valves. seat tightness test and operability test according to EN 12266
other tests by agreement.
Connection to the piping
flanged ends acc. to EN 1092-1, ISO 7005-1, GOST 33259-2015 Installation
welded ends acc. to EN 12627 Gate valves may be installed in any position.

Position Component
6
1 Body
9 2 Pressure seal bonnet
2
7 3 Wedge + overlay
5 4 Seat + overlay
8 5 Stem
6 Stem nut
4 7 Segmented ring
1 8 Gasket
9 Packing
3

Production range
DN
Type PN
50 65 80 100 125 150 200 250 300 350 400
63 • • • • • • • • • •
S43.1
100 • • • • • • • • • •
16 • • • • • • • • • • •
25 • • • • • • • • • • •
S43.3 40 • • • • • • • • • • •
63 • • • • • • • • • • •
100 • • • • • • • • • • •
160 • • • • • • • • • •
250 • • • • • • • • • •
S43.5
320 • • • • • • • • • •
400 • • • • • • • • • •

16 w w w. ar m atur ygroup. cz
GATE VALVES TYPE S43.1

DN 50-350 • PN 63-100 • Tmax 600 °C (450 °C) Connection: E

 N 1092-1, ISO 7005-1, GOST 33259-2015 FLANGED ENDS
Body design: forged body, bolted bonnet EN 12627 WELDED ENDS
Gate valve can be supplied in cast design as well.
Rising stem

Dk B

A
H

do x n
h

HC
DN
D3
D2
D1
dp
d1

d1
dp
L g L
Welded ends Flanged ends Welded ends

Material acc. to EN PN 63-100

Component Tmax 450 °C Tmax 530 °C Tmax 560 °C Tmax 570 °C Tmax 600 °C Welded ends
P250GH 13CrMo4-5 14MoV6-3 11CrMo9-10 dp kg kg
Body, bonnet, wedge 16Mo3 (1.5415) DN d1 L H HC h Dk
(1.0460) (1.7335) (1.7715) (1.7383) PN 63 PN 100 PN 63 PN 100
Stem X39CrMo17-1 (1.4122) 50 62 54 250 463 430 61 400 28,2 32.2
Seat + overlay 1.0460 + Stellite 1.5415 + Stellite 1.7335 + Stellite 1.7715 + Stellite 1.7383 + Stellite 65 77 69 290 624 420 77 400 40,9 45,9
Wedge + overlay 1.0460 + Stellite 1.5415 + Stellite 1.7335 + Stellite 1.7715 + Stellite 1.7383 + Stellite 80 91 81 310 545 520 92 500 48,7 49,7
Packing ring Graphite 100 117 104 350 590 530 115 500 70,6 81,6
125 144 130,5 127 400 700 640 140 500 133,9 135,9
150 172 156,5 154 450 760 700 160 700 215,1 228,1
200 223 204,5 199,5 550 920 85 225 700 260,0 360,0
250 278 255 248,5 650 1180 980 270 850 440,2 591,4
300 329 301 295,5 750 1540 1450 325 800 604,5 864,0
350 362 330 850 1395 1500 355 630 814,6 963,8
PN 63-100

Flanged ends
PN 63 PN 100
DN L D3 D1 D1
D2 to x n g kg D2 to x n g kg
GOST EN GOST EN
50 250 102 175 180 135 22 x 4 26 39 195 145 26 x 4 30 43
65 290 122 200 205 160 22 x 8 26 56 220 170 26 x 8 34 61
80 310 138 210 215 170 22 x 8 28 62 230 180 26 x 8 36 63
100 350 162 250 200 26 x 8 30 97 265 210 30 x 8 40 108
125 400 188 295 240 30 x 8 34 164 310 315 250 33 x 8 40 166
150 450 218 340 345 280 33 x 12 36 265 350 355 290 33 x 12 44 278
200 550 285 405 415 345 36 x 12 42 335 430 360 36 x 12 52 437
250 650 345 470 400 36 x 16 46 498 500 505 430 39 x 12 60 692
300 750 410 530 460 36 x 16 52 677 585 500 42 x 16 68 1010
350 850 465 595 600 525 39 x 16 56 914 655 560 48 x 16 74 1158

www.armaturygroup.cz
w w w. ar m atur ygroup. cz 17
 GATE VALVES TYPE S43.3

DN 50-400 • PN 16-100 • Tmax 100 °C Connection: E

 N 12627 WELDED ENDS
Body design: fully welded gate valve EN 1092-1, ISO 7005-1 FLANGED ENDS
Non-rising stem (on request)

Ø Dk B

A
H1
H

HC
Ø D1
Ø dp

Ød

ØD
H3

L
L1

Material
Component from -46°C to 100°C from -46°C to 100°C from -46°C to 100°C
Body A350 LF2 A350 LF2 Re340MPa A350 LF2 Re340MPa
Extension A350 LF2 A350 LF2 Re340MPa A350 LF2 Re340MPa
Flanges A350 LF2 A350 LF2 Re340MPa A694 F52
Bonnet A350 LF2 A350 LF2 Re340MPa A350 LF2 Re340MPa
Wedge + overlay A350 LF2 + Stellite A350 LF2 + Stellite A350 LF2 + Stellite
Stem nut bronze bronze bronze
Seat + overlay A350 LF2 + Stellite A350 LF2 + Stellite A350 LF2 + Stellite
Stem 1.4923 1.4923 1.4923
Stem sealing 1.4021 1.4021 1.4021
Actuator flange 1.0570 1.0570 1.0570
Vent plug 1.4021 1.4021 1.4021
Position indicator 1.0570 1.0570 1.0570

PN 16-100
S43.3 - welded ends, with handwheel
DN d D1 dp H H1 H2 HC L Dk kg A B C D ISO 5210
50 49 60,3 340 250 65 380 292 250 41 * * - - F10
80 74 114,3 382 280 87 440 356 320 56 * * - - F14
100 100 139,7 510 371 120 590 432 400 72 * * - - F14
Acc. to order

150 150 219,1 650 491 140 736 559 500 169 * * - - F14
200 201 273 748 586 175 840 660 630 312 * * - - F16
250 252 323,9 1305 740 210 895 787 400 485 * * 360 410 F25
300 303 406,4 1380 850 265 970 838 400 670 * * 360 410 F25
400 385 457 1524 980 320 1100 991 500 1250 * * 380 424 F30
* Dimensions A and B depend on the particular actuator type.
Note: DN 250 up to DN 400 are supplied only with gear and handwheel.
Weight [kg] is only approximate, depending on the actuator type.

18 w w w. ar m atur ygroup. cz
GATE VALVES TYPE S43.5

DN 65-400 • PN 160-400 • Tmax 650 °C (450 °C) Connection: E

 N 12627 WELDED ENDS
Body design: forged body, pressure seal bonnet EN 1092-1, ISO 7005-1 FLANGED ENDS
Rising stem (on request)

Dk

H (open)
HC
d1
dp

d1
dp

d
d

L L

Material acc. to EN
Component Tmax 450 °C Tmax 530 °C Tmax 570 °C Tmax 570 °C Tmax 600 °C Tmax 450 °C Tmax 650 °C
P250GH 16Mo3 13CrMo4-5 14MoV6-3 11CrMo9-10 15NiCuMoNb5-6-4 X10CrMoVNb9-1
Body
(1.0460) (1.5415) (1.7335) (1.7715) (1.7383) (1.6368) (1.4903)
Pressure seal bonnet 1.0460 1.5415 1.7335 1.7715 1.7380 1.6368 1.4903
Wedge + overlay 1.0460 + Stellite 1.5415 + Stellite 1.7335 + Stellite 1.7715 + Stellite 1.7380 + Stellite 1.6368 + Stellite 1.4903 + Stellite
Seat + overlay 1.0460 + Stellite 1.5415 + Stellite 1.7335 + Stellite 1.7715 + Stellite 1.7380 + Stellite 1.6368 + Stellite 1.4903 + Stellite
Stem X22CrMoV12-1 (1.4923)
Stem nut Bronze 42 3046
Segmented ring 1.7715 1.6368 1.4903
Gasket Pressed graphite
Packing Pressed graphite

PN 160-400
DN/d d1* dp L* Lmin * HC kg operation free Top flange A B H (open) Dk kg with handwheel
65/50 77 360 216 425 47, 49 F10, F14 490 400 48
80/75 90 450 305 550 105 F14 640 400 105
100/75 115 450 406 550 107 F14 640 400 106
125/110 141 500 483 696 244 F14 850 500 250
150/110 170 550 559 696 255, 262 F14, F16 850 500 254
175/125 180 650 559 769 317, 325 F14, F16 920 630 326
Acc. to actuator

Acc. to actuator

175/150 196 650 660 840 361, 372 F14, F16 1000 630 380
Acc. to order

200/150 222 650 660 840 437, 448 F14, F16 1000 630 456
225/175 248 650 660 900 511, 590 F16, F25 1080 800 528
250/200 276 800 787 1120 850, 880 F16, F25 1300 800 840
250/225 303 900 787 1160 1140 F25 1350 F25 1150
300/225 325 900 914 1160 1170 F25 1350 F25 1180
300/250 325 1000 991 1330 1500, 1530 F25, F30 1540 F25, F30 1500
350/275 359 1000 991 1380 1700 F30 1680 F30 1700
400/300 411 1200 1092 1550 2050 F30 1840 F30 2050

* dimensions d1 and L can be adjusted acc. to customer request

www.armaturygroup.cz
w w w. ar m atur ygroup. cz 19
 CONTROL GATE VALVES TYPE S43.C

Application Body material

 onventional and nuclear power engineering where a specified
C 
Forged alloy and carbon steel
shape of the performance characteristic depending on the valve (1.0460, 1.5415, 1.7335, 1.7715, 1.7380, 1.6368, 1.4903)
travel for different flow rates is required.
Gas industry where piping with different pressures is to be Operation
connected or where gas is to be discharged from the piping  anual (hand wheel)
m
system in a defined way. electric actuator
Heat production and distribution where a defined quantity of pneumatic actuator
the fluid is to be fed to the equipment in order to guarantee actuator located out of the valve
performance of the equipment. Gate valves can be equipped with a locking device.

Working medium Testing

 ater
w The gate valves are subjected to the following tests performed with
steam water:
gas shell strength test
other fluids shell tightness test
seat tightness test and operability test according to EN 12266
Technical description other tests by agreement.
The control gate valves are valves used to control the flow of
the service fluid which may flow in either direction. The control Connection to the piping
gate valves are not isolating valves. The design of control gate  anged ends acc. to EN 1092-1, ISO 7005-1, GOST 33259-2015
fl
valves is based on the design of conventional gate valves. The welded ends acc. to EN 12627
control features of the gate valves are provided by the unique
construction of the throttle plate, seats and guides. The throttle Installation
plate and the seats are equipped with special holes or grooves Gate valves may be installed in any position
that overlap each other during the process of opening so that
the regulating characteristic is guaranteed exactly in accordance Advantages
with the customer’s specification. The control gate valves made low pressure loss which brings power savings of approximately
by ARMATURY Group are designed by means of sophisticated 500 MWh annually in comparison with a DN 150 PN 250 control
computer programs and the throttling components of each valve.
gate valve have holes of different shapes for the performance use of special sealing material which meets the requirements of
characteristic of the gate valve to be in full conformance with “Nuclear Spec. D50YP12 Rev. 2”, TA Luft and VDI 2440.
requirements of the customer.

DN 50-400 • PN 63-400 • Tmax 600°C

6 8
Position Component
1 Body
2
2 Bonnet
3 Wedge + overlay 5
4 Seat + overlay 7
5 Stem
6 Stem nut 4
7 Segmented ring
1
8 Gasket

20 w w w. ar m atur ygroup. cz
GATE VALVES TYPE S33.1

Application
Gate valves are isolating valves designed for full closing or opening
of working media flow. If the gate valves are used for regulating
or throttling purposes, the manufacturer does not guarantee
tightness of the gate valves.

Working medium
water
non-corrosive liquids
steam
air
gases of group 1 and 2
petroleum and petroleum products
The service fluids shall not contain rough impurities.

Technical description
The gate valve is an outside-screw-and-yoke, full bore with flexible
wedge and rising stem. The body and the bonnet are made
of castings and are connected by a  flanged joint. The seating
surfaces of the seats and the wedge are made in compliance with
API 600. The seat rings are welded into the body. The gate valves
are equipped with a back seat. The gate valves are a bi-directional
sealing valves. The body-bonnet joint and the packing chamber Accessories
are sealed with asbestos-free gasket and packing which guarantee The gate valves can be equipped with the following accessories:
a long life service. The requirement for an automatic body cavity drain valve,
pressure relief shall be specified in the purchase order. Pressure air-vent valve,
relief can be achieved by: by-pass valves,
drilling a hole through one disc of the wedge, stand for remote control, including chains and chain wheels,
special valve incorporated into the wedge, vent plugs,
external bypass, gland pcking „live loading“.
use of solid wedge.
TA-Luft design on request. Testing
The gate valves are subjected to the following tests performed with
Connection to the piping water:
 anged ends - according to ASME B16.5 a B16.47,
fl shell strength test
face-to-face dimensions are according to ASME B16.10 shell tightness test
w
 elded ends - according to ASME B16.25 operability test according to API 598
other tests by agreement
Operation
The gate valves are delivered with a  handwheel, a  manual bevel Installation
gear, an electric actuator or bare stem ready for connection to The gate valves may be installed into the piping in vertical or
an actuator. The standard connecting dimensions for connection horizontal position. In case of gate valves equipped with an electric
to a manual gear or an electric actuator meet the requirements of actuator or a pneumatic actuator, must you follow instructions of
ISO 5210. the manufacturer of actuators.

Production range
NPS
Class
2 2 1/2 3 4 6 8 10 12 14 16 18 20 24 28 30 32 36 42 48
150 • • • • • • • • • • • • • • • • • • •
300 • • • • • • • • • • • • • • • • •
600 • • • • • • • • • • • • •
900 • • • • • • • • • •
1500 • • • • • • • • • •

www.armaturygroup.cz
w w w. ar m atur ygroup. cz 21
 GATE VALVES TYPE S33.1

NPS 2-48 • Class 150-1500 • Tmax 450 °C (595 °C) Connection: A

 SME B16.5, ASME B16.47 FLANGED ENDS
Body design: yoke gate valve ASME B16.25 WELDED ENDS
Body, bonnet, wedge: cast
Rising stem
Flexible wedge

11
6 9
7 2

10 5

3
4
1

Material acc. to ASTM

Carbon steel
Position Component Carbon steel Alloy steel Stainless steel
for low temperatures
1 Body A216 WCB A217 WC6 A352 LCC A351 CF8M
2 Bonnet A216 WCB A217 WC6 A352 LCC A351 CF8M
3 Wedge + overlay ** A216 WCB + 13Cr A217 WC6 + Stellite 6 A352 LCC + F304 A351 CF8M
4 Seat + overlay ** A105 + 13Cr A182 F11 + Stellite 6 A350 LF2 + Stellite 6 A182 F316
5 Stem A182 F6a A182 F6a A182 F304 A182 F316
6 Bonnet bolts* A193 B7* A193 B16* A320 L7* A193 B8*
7 Bonnet nuts* A 194 2H* A194 4* A194 7* A194 8*
8 Stem nut A439 D2 (Ni-rezist), Al-bronze
9 Back seat A182 F6a A182 F304 A182 F316
10 Gasket Graphite with stainless steel insert
11 Packing Pressed graphite

* equivalent or according to customer’s request

** other trims according to API 600

22 w w w. ar m atur ygroup. cz
GATE VALVES TYPE S33.1

NPS 2-48 • Class 150-1500 • Tmax 450 °C (595 °C) Connection: A

 SME B16.5, ASME B16.47 FLANGED ENDS
Body design: yoke gate valve ASME B16.25 WELDED ENDS

Class 150

BW
NPS DN D1 D2 D3 dxn L b H (open) Dk kg
L1 kg
2 50 150 120,7 92,1 19,1x4 178 14,3 397 200 18 216 18
2,5 65 180 139,7 104,3 19,1x4 190 20,7 435 250 26 241 28
3 80 190 152,4 127 19,1x4 203 17,5 497 250 34 283 30
4 100 230 190,5 157,2 19,1x8 229 22,3 585 250 52 305 50
6 150 280 241,3 215,9 22,4x8 267 23,9 765 350 88 403 85
8 200 345 298,5 269,9 22,4x8 292 27 973 350 144 419 128
10 250 405 362 323,8 25,4x12 330 28,6 1160 400 197 457 220
12 300 485 431,8 381 25,4x12 356 30,2 1362 450 298 502 310
14 350 535 473,6 412,8 28,6x12 381 33,4 1520 500 406 572 450
16 400 595 539,8 469,9 28,6x16 406 35 1725 560 524 610 550
18 450 625 577,9 533,4 31,8x16 432 38,1 1930 560 626 660 700
20 500 700 635 584,2 31,8x20 457 41,3 2160 610 789 711 910
24 600 815 749,3 692,2 35x20 508 46,1 2540 610 1033 813 1130
28 700 925 863,6 800 35x28 610 69,9 2990 - 1905 914 1750
30 750 985 914,4 857 35x28 610 73,1 3070 - 2145 914 1960
32 800 1060 977,9 914 41,3x28 711 79,4 3460 - 3506 - -
36 900 1170 1085,8 1022 41,3x32 711 88,9 3660 - 3575 - -
42 1000 1345 1257,3 1194 41,3x36 813 88,9 4260 - 5123 - -
48 1200 1510 1422,4 1356 41,3x44 884 95,3 4875 - 6668 - -

www.armaturygroup.cz
w w w. ar m atur ygroup. cz 23
 GATE VALVES TYPE S33.1

NPS 2-48 • Class 150-1500 • Tmax 450 °C (595 °C) Connection: A

 SME B16.5, ASME B16.47 FLANGED ENDS
Body design: yoke gate valve ASME B16.25 WELDED ENDS

Class 300
BW
NPS DN D1 D2 D3 dxn L b H (open) Dk kg
L1 kg
2 50 165 127 92,1 19,1x8 216 20,7 422 200 24 216 19
2,5 65 190 149,2 104,3 22,4x8 241 23,9 446 250 31 241 29
3 80 210 168,3 127 22,4x8 282 27 512 250 52 282 38
4 100 244 200 157,2 22,4x8 305 30,2 603 250 76 305 57
6 150 320 269,9 215,9 22,4x12 403 35 804 350 146 403 118
8 200 380 330,2 269,9 25,4x12 419 39,7 1002 400 218 419 183
10 250 445 387,4 323,8 28,6x16 457 46,1 1229 400 352 457 278
12 300 520 450,8 381 31,8x16 502 49,3 1479 460 460 502 406
14 350 585 514,4 412,8 31,8x20 762 54,6 1630 560 857 762 565
16 400 650 571,5 469,9 35x20 838 55,6 1815 460 1172 838 728
18 450 710 628,6 533,4 35x24 914 58,8 2000 460 1281 914 806
20 500 775 685,8 584,2 35x24 991 62 2220 560 1498 991 1231
24 600 915 812,8 692,2 41,3x24 1143 68,3 2620 610 2282 1143 1890
30 750 1090 997 857 47,6x28 1397 73,1 3180 700 4495 1397 3686
36 900 1270 1168,4 1022 54x32 1727 88,9 3760 700 5833 1727 4784

Class 600
BW
NPS DN D1 D2 D3 dxn L b H (open) Dk kg
L1 kg
2 50 165 127 92,1 19,1x8 292 25,4 441 250 46 292 31
2,5 65 190 149,2 104,3 22,4x8 330 28,6 510 300 62 330 57
3 80 210 168,3 127 22,4x8 356 31,8 574 300 72 356 65
4 100 275 215,9 157,2 25,4x8 432 38,1 700 350 128 432 87
6 150 355 292,1 215,9 28,6x12 559 47,7 804 450 216 559 169
8 200 420 349,2 269,9 31,8x12 660 55,6 1055 500 413 660 375
10 250 510 431,8 323,8 35x16 787 63,5 1314 640 754 787 604
12 300 460 489 381 35x20 838 66,7 1460 680 981 838 859
14 350 605 527 412,8 38,1x20 889 69,9 1750 610 1316 889 1154
16 400 685 603,2 469,9 41,3x20 991 76,2 1900 610 1672 991 1530
18 450 745 654 533,4 44,5x20 1092 82,6 2020 640 2780 1092 2282
20 500 815 723,9 584,2 44,5x24 1194 88,9 2172 700 3203 1194 2650
24 600 940 838,2 692,2 50,8x24 1397 101,6 2650 750 4069 1397 3340
Class 900
BW
NPS DN D1 D2 D3 dxn L b H (open) Dk kg
L1 kg
2 50 216 165 92 25 x 8 368 39 500 280 70 368 63
3 80 241 190,5 127 25 x 8 381 39 660 300 140 381 126
4 100 292 235 157 32 x 8 457 45 750 350 200 457 180
6 150 381 317,5 215,9 32 x 12 610 56 1060 500 358 610 322
8 200 470 393,7 270 38 x 12 737 64 1140 650 550 737 495
10 250 546 469,9 324 38 x 16 838 70 1370 700 1000 838 900
12 300 610 533,4 381 38 x 20 965 79,3 1560 900 1215 965 1094
14 350 640 558,8 413 41 x 20 1029 86 1950 900 1600 1029 1440
16 400 705 616 470 44 x 20 1130 89 2100 900 2150 1130 1935

Class 1500
BW
NPS DN D1 D2 D3 dxn L b H (open) Dk kg
L1 kg
2 50 216 165 92 25 x 8 368 39 510 280 70 368 63
3 80 267 203 127 32 x 8 470 48 670 350 175 470 158
4 100 311 241 157 35 x 8 546 54 770 400 270 546 243
6 150 394 317,5 215,9 38 x 12 705 83 1070 500 520 705 468
8 200 483 393,7 270 44 x 12 832 92 1180 750 820 832 738
10 250 584 482,6 324 51 x 12 991 108 1410 900 1560 991 1404
12 300 673 571,5 381 54 x 16 1130 124 1620 - 2730 1130 2457
14 350 750 635 413 60 x 16 1257 135 2020 - - 1257 -
16 400 825 704,8 470 60 x 16 1384 146 2180 - - 1384 -

24 w w w. ar m atur ygroup. cz
GATE VALVES TYPE S43

Application
Gate valves are shut-off valves. It is used especially in power
engineering, chemical industry as well as other industries
depending on material selection.

Working medium
water
steam
gas
other fluids

Technical description
The body is a forging into which a flexible wedge is inserted through
the yoke-type bonnet or through the pressure seal bonnet. The Operation
seating surfaces of the wedge are hard faced and proper seating manual (hand wheel)
of the wedge is provided for by precision-machined guides in the electric actuator
body. The seat rings are weld deposited in the body and hard faced pneumatic actuator
as well. The bonnet and the stuffing box are sealed with special actuator located out of the valve
graphite gaskets and packing rings. The gate valves can be on Gate valves can be equipped with a locking device.
request designed with pressure cavity released system against over
pressurizing of body cavity. There is an option of drilling a hole on Testing
an input side of the disc, using diaphragm or safety valve or making The gate valves are subjected to the following tests performed with
a by-pass. Also upon request, the gate valve can be equipped with water:
one to three bypass valves. shell strength test
shell tightness test
Connection to the piping operability test
 anged ends acc. to ASME B16.5
fl other tests by agreement.
welded ends acc. to ASME B16.25
socked welding ends acc. to ASME B16.11 Installation
threaded ends acc. to ASME B1.20.1 Gate valves may be installed in any position.

Position Component
1 Body
2 Pressure seal bonnet
3 Wedge + overlay
6
4 Seat + overlay
9 5 Stem
2
7 6 Stem nut
5 7 Segmented ring
8
8 Gasket
4 9 Packing
1

Production range
NPS
Type Class
1/2 3/4 1 1 1/2 2 2 1/2 3 4 6 8 10 12 14 16
150 • • • • •
300 • • • • •
600 • • • • •
S43.1
800 • • • • •
900 • • • • •
1500 • • • • •
900 • • • • • • • • • • • • • •
S43.5 1500 • • • • • • • • • • • • • •
2500 • • • • • • • • • • • • • •

www.armaturygroup.cz
w w w. ar m atur ygroup. cz 25
 GATE VALVES TYPE S43.1

NPS ½-2 • Class 150-1500 • Tmax • 538°C Connection: ASME B16.5 FLANGED ENDS
Body design: forged body, bolted bonnet ASME B16.11 SOCKED WELDING ENDS
THREADED ENDS (on request)

Dk Dk

H
H (open)

dp

dp
SW

L L
flanged ends socked welding ends

Material acc. to ASTM

Position Component Tmax 450°C Tmax 538°C Tmax 595°C
1 Body A105 A182 F316 A182 F22
2 Bonnet A105 A182 F316 A182 F22
3 Wedge + overlay* A276 410T A182 F316 + Stellite A182 F22 + Stellite
4 Seat + overlay* SS410 + Stellite A182 F316 + Stellite A182 F22 + Stellite
5 Stem A182 F6 A182 F316 A182 F6
6 Bolt A193 B7 A193 B8 A193 B7
*Other trims according to API 600

Class 150
Flanged ends Socked welding ends / SW
NPS
d L H Dk kg d L H Dk kg
1/2 10,5 108 180 100 3,40 10,5 79 161 100 2,20
3/4 13 117 182 100 3,80 13,5 92 163 100 2,40
1 17 127 216 125 5,90 17 111 196 125 4,20
1 1/2 28 165 246 160 9,90 29 120 251 160 6,20
2 36 178 283 180 14,70 36,5 140 290 180 10,50

Class 300
Flanged ends Socked welding ends / SW
NPS
d L H Dk kg d L H Dk kg
1/2 10,5 140 165 100 3,70 10,5 79 161 100 2,20
3/4 13 152 169 100 4,90 13,5 92 163 100 2,40
1 17 165 194 125 7,00 17 111 196 125 4,20
1 1/2 28 190 246 160 12,20 29 120 251 160 6,20
2 36 216 283 180 16,90 36,5 140 290 180 10,50

26 w w w. ar m atur ygroup. cz
GATE VALVES TYPE S43.1

NPS ½-2 • Class 150-1500 • Tmax • 538°C Connection: ASME B16.5 FLANGED ENDS
Body design: forged body, bolted bonnet ASME B16.11 SOCKED WELDING ENDS
THREADED ENDS (on request)

Class 600
Flanged ends Socked welding ends / SW
NPS
d L H Dk kg d L H Dk kg
1/2 10,5 165 165 100 4,10 10,5 79 161 100 2,20
3/4 13 190 169 100 5,50 13,5 92 163 100 2,40
1 17 216 194 125 8,00 17 111 196 125 4,20
1 1/2 28 241 246 160 10,80 29 120 251 160 6,20
2 36 292 283 180 20,60 36,5 140 290 180 10,50

Class 800
Socked welding ends / SW
NPS
d L H Dk kg
1/2 10,5 79 161 100 2,20
3/4 13,5 96 163 100 2,40
1 17 111 196 125 4,20
1 1/2 29 120 251 160 6,60
2 36,5 140 290 180 10,50

Class 900
Flanged ends Socked welding ends / SW
NPS
d L H Dk kg d L H Dk kg
1/2 10,5 216 191 125 6,90 10,5 111 191 125 4,80
3/4 12,5 229 192 125 7,00 13,5 111 192 125 4,90
1 17 254 219 160 15,10 17,5 120 219 160 5,90
1 1/2 28 305 296 200 21,90 29 140 296 180 11,20
2 36 371 316 220 27,60 36,5 178 316 200 17,20

Class 1500
Flanged ends Socked welding ends / SW
NPS
d L H Dk kg d L H Dk kg
1/2 10,5 216 191 125 7,00 10,5 111 191 125 4,90
3/4 12,5 229 192 125 7,10 13,5 111 192 125 5,00
1 17 254 219 160 15,30 17,5 120 219 160 6,00
1 1/2 28 305 296 200 22,10 29 140 296 180 11,40
2 36 371 316 220 27,80 36,5 178 316 200 17,50

*Class 2500 on request

www.armaturygroup.cz
w w w. ar m atur ygroup. cz 27
 GATE VALVES TYPE S43.5

NPS 2-16 • Class 900-2500 • Tmax 650°C Connection: A

 SME B16.5 FLANGED ENDS
Body design: forged body, pressure seal bonnet ASME B16.25 WELDED ENDS
Rising stem

9
2
7
5
8

Material acc. to ASTM

Position Component Tmax 425°C Tmax 593°C Tmax 593°C Tmax 650°C
1 Body A105N A182 F12 A182 F22 A182 F91
2 Pressure seal bonnet A105 A182 F12 A182 F22 A182 F91
3 Wedge + overlay A105 + Stellite A182 F12 + Stellite A182 F22 + Stellite A182 F91 + Stellite
4 Seat + overlay A105 + Stellite A182 F12 + Stellite A182 F22 + Stellite A182 F91 + Stellite
5 Stem X22CrMoV12-1 X20CrMoV11-1
6 Stem nut Bronze 42 3046
7 Segmented ring A182 F22 A182 F91
8 Gasket Pressed graphite
9 Packing Pressed graphite

28 w w w. ar m atur ygroup. cz
GATE VALVES TYPE S43.5

NPS 2-16 • Class 900-2500 • Tmax • 650°C Connection: A

 SME B16.5 FLANGED ENDS
Body design: forged body, pressure seal bonnet ASME B16.25 WELDED ENDS

Dk

A
H (open)

HC
dp
d1

d1
dp
d

d
L L

Class 900
kg operation kg with
NPS d1 * dp L* HC Top flange A B H (open) Dk
free handwheel
2 62 216 425 42 F14 490 400 43
3 91 305 550 94 F14 640 400 95
4 117 356 550 97 F14 640 400 98
Acc. to actuator

Acc. to actuator
Acc. to order

6 172 508 696 252 F14 850 500 251

8 223 660 840 385 F16 1000 630 380
10 278 787 1120 850,880 F16, F25 1300 800 840
12 329 914 1160 1170 F25 1350 F25 1235
14 362 991 1420 1700 F30 1680 F30 1820
16 413 1092 1550 2020 F30 1840 F30 2140

Class 1500
kg operation kg with
NPS d1 * dp L* HC Top flange A B H (open) Dk
free handwheel
2 62 216 425 42 F14 490 400 43
3 91 305 550 94 F14 640 400 95
4 117 406 550 97 F14 640 400 98
Acc. to actuator

Acc. to actuator
Acc. to order

6 172 559 696 255 F14 850 500 254

8 223 711 840 390 F16 1000 630 385
10 278 864 1120 856,886 F16, F25 1300 800 845
12 329 991 1160 1180 F25 1350 F25 1245
14 362 1067 1420 1725 F30 1680 F30 1845
16 413 1194 1550 2050 F30 1840 F30 2170

Class 2500

kg operation kg with
NPS d1 * dp L* HC Top flange A B H (open) Dk
free handwheel
2 62 279 425 44 F14 490 400 45
3 91 368 550 96 F14 640 400 97
4 117 457 550 99 F14 640 400 100
Acc. to actuator

Acc. to actuator
Acc. to order

6 172 610 696 258 F14 850 500 257

8 223 762 840 392 F16 1000 630 387
10 278 914 1120 860,890 F16, F25 1300 800 850
12 329 1041 1160 1190 F25 1350 F25 1255
14 362 1118 1420 1730 F30 1680 F30 1850
16 413 1245 1550 2080 F30 1840 F30 2200
* dimensions d1 and L can be adjusted acc. to customer request

www.armaturygroup.cz
w w w. ar m atur ygroup. cz 29
 GATE VALVES

TABLE OF PRESSURE-TEMPERATURE RATINGS ACC. TO EN

PS values are acc. to flange connection standard EN 1092-1 (March 2008).

PN 2,5
Body material Material class Maximum allowable working pressure - in bar
Temperature 20 °C 100 °C 150 °C 200 °C 250 °C 300 °C 350 °C 400 °C 450 °C 500 °C 550 °C 560 °C 570 °C
1.0425 (P265GH) 3E0 2,5 2,3 2,2 2,0 1,9 1,7 1,6 1,4 0,8 - - - -
1.0566 (P355NL1) 7E1 2,5 2,5 2,5 2,5 2,5 2,4 2,2 1,9 - - - - -

PN 6
Body material Material class Maximum allowable working pressure - in bar
Temperature 20 °C 100 °C 150 °C 200 °C 250 °C 300 °C 350 °C 400 °C 450 °C 500 °C 550 °C 560 °C 570 °C
1.0425 (P265GH) 3E0 6,0 5,5 5,2 5,0 4,5 4,1 3,8 3,5 1,9 - - - -
1.0566 (P355NL1) 7E1 6,0 6,0 6,0 6,0 6,0 5,8 5,4 4,7 - - - - -
1.0619 (GP240GH) 3E0 6,0 5,5 5,2 5,0 4,5 4,1 3,8 3,5 1,9 - - - -
1.4408 (GX5CrNiMo19-11-2) 14E0 6,0 6,0 5,4 5,0 4,7 4,4 4,2 4,1 4,0 3,9 3,9 - -

PN 10
Body material Material class Maximum allowable working pressure - in bar
Temperature 20 °C 100 °C 150 °C 200 °C 250 °C 300 °C 350 °C 400 °C 450 °C 500 °C 550 °C 560 °C 570 °C
1.0619 (GP240GH) 3E0 10,0 9,2 8,8 8,3 7,6 6,9 6,4 5,9 3,2 - - - -
1.4408 (GX5CrNiMo19-11-2) 14E0 10,0 10,0 9,0 8,4 7,9 7,4 7,1 6,8 6,7 6,6 6,5 - -

PN 16
Body material Material class Maximum allowable working pressure - in bar
Temperature 20 °C 100 °C 150 °C 200 °C 250 °C 300 °C 350 °C 400 °C 450 °C 500 °C 550 °C 560 °C 570 °C
1.0425 (P265GH) 3E0 16,0 14,8 14,0 13,3 12,1 11,0 10,2 9,5 5,2 - - - -
1.0566 (P355NL1) 7E1 16,0 16,0 16,0 16,0 16,0 15,6 14,4 12,7 - - - - -
1.0619 (GP240GH) 3E0 16,0 14,8 14,0 13,3 12,1 11,0 10,2 9,5 5,2 - - - -
1.7357 (G17CrMo5-5) 5E0 16,0 16,0 16,0 16,0 16,0 15,9 15,2 14,4 13,7 10,4 3,7 3,0 2,5
1.6220 (G20Mn5) 7E1 16,0 16,0 16,0 16,0 16,0 15,6 - - - - - - -
1.4408 (GX5CrNiMo19-11-2) 14E0 16,0 16,0 14,5 13,4 12,7 11,8 11,4 10,9 10,7 10,5 10,4 - -

PN 25
Body material Material class Maximum allowable working pressure - in bar
Temperature 20 °C 100 °C 150 °C 200 °C 250 °C 300 °C 350 °C 400 °C 450 °C 500 °C 550 °C 560 °C 570 °C
1.0425 (P265GH) 3E0 25,0 23,2 22,0 20,8 19,0 17,2 16,0 14,8 8,2 - - - -
1.0566 (P355NL1) 7E1 25,0 25,0 25,0 25,0 25,0 24,5 22,6 19,8 - - - - -
1.0619 (GP240GH) 3E0 25,0 23,2 22,0 20,8 19,0 17,2 16,0 14,8 8,2 - - - -
1.7357 (G17CrMo5-5) 5E0 25,0 25,0 25,0 25,0 25,0 24,8 23,8 22,6 21,4 16,3 5,8 4,7 3,9
1.6220 (G20Mn5) 7E1 25,0 25,0 25,0 25,0 25,0 24,5 - - - - - - -
1.4408 (GX5CrNiMo19-11-2) 14E0 25,0 25,0 22,7 21,0 19,8 18,5 17,8 17,1 16,8 16,5 16,3 - -

PN 40
Body material Material class Maximum allowable working pressure - in bar
Temperature 20 °C 100 °C 150 °C 200 °C 250 °C 300 °C 350 °C 400 °C 450 °C 500 °C 550 °C 560 °C 570 °C
1.0619 (GP240GH) 3E0 40,0 37,1 35,2 33,3 30,4 27,6 25,7 23,8 13,1 - - - -
1.7357 (G17CrMo5-5) 5E0 40,0 40,0 40,0 40,0 40,0 39,8 38,0 36,1 34,2 26,0 9,3 7,6 6,2
1.6220 (G20Mn5) 7E1 40,0 40,0 40,0 40,0 40,0 39,2 - - - - - - -
1.4408 (GX5CrNiMo19-11-2) 14E0 40,0 40,0 36,3 33,7 31,8 29,7 28,5 27,4 26,9 26,4 26,0 25,7 25,4

PN 63
Body material Material class Maximum allowable working pressure - in bar
Temperature 20 °C 100 °C 150 °C 200 °C 250 °C 300 °C 350 °C 400 °C 450 °C 500 °C 550 °C 560 °C 570 °C
1.0619 (GP240GH) 3E0 63,0 58,5 55,5 52,5 48,0 43,5 40,5 37,5 20,7 - - - -
1.7357 (G17CrMo5-5) 5E0 63,0 63,0 63,0 63,0 63,0 62,7 60,0 57,0 54,0 41,1 14,7 12,0 9,9
1.6220 (G20Mn5) 7E1 63,0 63,0 63,0 63,0 63,0 61,8 - - - - - - -
1.4408 (GX5CrNiMo19-11-2) 14E0 63,0 63,0 57,3 53,1 50,1 46,8 45,0 43,2 42,4 41,7 41,1 40,5 40,0

30 w w w. ar m atur ygroup. cz
GATE VALVES

PN 100
Body material Material class Maximum allowable working pressure - in bar
Temperature 20 °C 100 °C 150 °C 200 °C 250 °C 300 °C 350 °C 400 °C 450 °C 500 °C 550 °C 560 °C 570 °C
1.0619 (GP240GH) 3E0 100,0 92,8 88,0 83,3 76,1 69,0 64,2 59,5 32,8 - - - -
1.7357 (G17CrMo5-5) 5E0 100,0 100,0 100,0 100,0 100,0 99,5 95,2 90,4 85,7 65,2 23,3 19,0 15,7
1.6220 (G20Mn5) 7E1 100,0 100,0 100,0 100,0 100,0 98,0 - - - - - - -
1.4408 (GX5CrNiMo19-11-2) 14E0 100,0 100,0 90,9 84,2 79,5 74,2 71,4 68,5 67,3 66,1 65,2 64,3 63,5

PN 160
Body material Maximum allowable working pressure - in bar
Temperature 20 °C 100 °C 150 °C 200 °C 250 °C 300 °C 350 °C 400 °C 450 °C 480 °C 500 °C 520 °C 530 °C 540 °C 550 °C 560 °C 570 °C 580 °C 590 °C 600 °C
P250GH (C22.8) 1.0460 175,2 167,6 152,4 133,3 121,9 110,4 102,8 95,2 52,6 - - - - - - - - - - -
16Mo3 1.5415 197 179 160 144,8 133,3 114,3 110,5 106,7 102,9 100,6 70,9 45 35,8 - - - - - - -
13CrMo4-5 1.7335 194 182,9 171,4 160 152,4 141 133,3 125,7 118,1 115,8 104,4 71,6 59,4 46,5 37,3 30,5 25,1 - - -
11CrMo9-10
1.7380 190,5 178,7 171,2 163,8 156,2 148,6 141 133,3 125,7 121,1 102,9 78,5 68,6 59,4 51,8 44,2 38,9 33,5 29 25,9
(1.7383)
14MoV6-3 1.7715 219 215 210 203 183,6 171,4 164,6 159,2 154,7 153,3 147 113,5 99,8 86,1 75,4 65,5 55,6 - - -
15NiCuMoNb5-6-4 1.6368 260 260 260 260 260 258 249 224 157 - - - - - - - - - - -
GP240GH 1.0619 160 149 141 133 122 110 103 95,2 52,5 - - - - - - - - - - -
G20Mo5 1.5419 160 160 160 160 156 137 130 122 118 89,7 70,8 44,9 35,8 - - - - - - -
G17CrMo5-5 1.7357 186,7 172,1 161,2 160 160 159 152 145 137 117 104 71,6 59,4 46,4 37,3 30,4 - - - -

PN 250
Body material Maximum allowable working pressure - in bar
Temperature 20 °C 100 °C 150 °C 200 °C 250 °C 300 °C 350 °C 400 °C 450 °C 480 °C 500 °C 520 °C 530 °C 540 °C 550 °C 560 °C 570 °C 580 °C 590 °C 600 °C
P250GH (C22.8) 1.0460 274 262 238 208 184,5 160,7 136,9 107,1 82,1 - - - - - - - - - - -
16Mo3 1.5415 307 280 250 226 208 178,6 172,6 166,7 160,7 157,1 110,7 70,2 56 - - - - - - -
13CrMo4-5 1.7335 302 286 268 250 238 220 208 196 184,5 181 163,1 111,9 92,9 72,6 58,3 47,6 39,3 - - -
11CrMo9-10
1.7380 298 279 268 256 244 232 220 208 196,4 189,3 160,7 122,6 107,1 92,9 81 69 60,7 52,4 45,2 40,5
(1.7383)
14MoV6-3 1.7715 342 336 329 318 287 268 257 249 242 240 230 177,4 156 134,5 117,9 102,4 86,9 - - -
15NiCuMoNb5-6-4 1.6368 400 400 400 400 400 400 389 350 245 - - - - - - - - - - -

PN 320
Body material Maximum allowable working pressure - in bar
Temperature 20 °C 100 °C 150 °C 200 °C 250 °C 300 °C 350 °C 400 °C 450 °C 480 °C 500 °C 520 °C 530 °C 540 °C 550 °C 560 °C 570 °C 580 °C 590 °C 600 °C
P250GH (C22.8) 1.0460 350 335 305 267 236 206 175,2 137,1 105,1 - - - - - - - - - - -
16Mo3 1.5415 393 358 320 290 267 229 221 213 206 201 141,7 89,9 71,6 - - - - - - -
13CrMo4-5 1.7335 387 366 343 320 305 282 267 251 236 232 209 143,2 118,9 93 74,7 61 50,3 - - -
11CrMo9-10
1.7380 381 357 342 328 312 297 282 267 251 242 206 157 137,1 118,9 103,6 88,4 77,7 67 57,9 51,8
(1.7383)
14MoV6-3 1.7715 438 430 421 407 367 343 329 318 309 307 294 227 199,6 172,2 150,9 131 111,2 - - -
15NiCuMoNb5-6-4 1.6368 510 510 510 510 510 510 498 448 314 - - - - - - - - - - -

PN 400
Body material Maximum allowable working pressure - in bar
Temperature 20 °C 100 °C 150 °C 200 °C 250 °C 300 °C 350 °C 400 °C 450 °C 480 °C 500 °C 520 °C 530 °C 540 °C 550 °C 560 °C 570 °C 580 °C 590 °C 600 °C
P250GH (C22.8) 1.0460 438 419 381 333 295 257 219 171,4 131,4 - - - - - - - - - - -
16Mo3 1.5415 491 448 400 362 333 286 276 267 257 251 177,1 112,4 89,5 - - - - - - -
13CrMo4-5 1.7335 484 457 429 400 381 352 333 314 295 290 261 179 148,6 116,2 93,3 76,2 62,9 - - -
11CrMo9-10
1.7380 476 447 428 410 390 371 352 333 314 303 257 196,2 171,4 148,6 129,5 110,5 97,1 83,8 72,4 64,8
(1.7383)
14MoV6-3 1.7715 548 537 526 509 459 429 411 398 387 383 368 284 250 215 188,6 163,8 139 - - -
15NiCuMoNb5-6-4 1.6368 640 640 640 640 640 640 623 560 392 - - - - - - - - - - -

X10CrMoVNb9-1
Maximum allowable working pressure - in bar
1.4903
Temperature 450 °C 480 °C 500 °C 520 °C 530 °C 540 °C 550 °C 560 °C 570 °C 580 °C 590 °C 600 °C 610 °C 620 °C 630 °C 640 °C 650 °C
PN 160 244 235 197 168 153 139,4 126,5 114,3 102,1 91,4 80,8 71,6 63,2 55,6 49,5 42,7 37,3
PN 250 381 367 307 262 239 218 198 179 160 142,9 126,2 111,9 98,8 86,9 77,4 66,7 58,3
PN 320 488 469 393 335 306 279 253 229 204 183 162 143,2 126,5 111,2 99 85,3 74,7
PN 400 610 587 491 419 383 349 316 286 255 229 202 179 158,1 139 123,8 106,7 93,3
PN 630 960 924 774 660 603 549 498 450 402 360 318 282 249 219 195 168 147

www.armaturygroup.cz
w w w. ar m atur ygroup. cz 31
 GATE VALVES

TABLE OF PRESSURE-TEMPERATURE RATINGS ACC. TO ASME

PS values are acc. to flange connection standard ASME B16.34-2013 A-Standard Class.

Class 150
Body material Material class Maximum allowable working pressure - in bar
Temperature 20 °C 100 °C 150 °C 200 °C 250 °C 300 °C 350 °C 400 °C 425 °C 450 °C 500 °C 538 °C 575 °C 600 °C 650 °C
A 350 LF2 1.1 19,6 17,7 15,8 13,8 12,1 10,2 8,4 6,5 5,5 - - - - - -
A 516 70 1.1 19,6 17,7 15,8 13,8 12,1 10,2 8,4 6,5 5,5 - - - - - -
A 216 WCB 1.1 19,6 17,7 15,8 13,8 12,1 10,2 8,4 6,5 5,5 - - - - - -
A 105 1.1 19,6 17,7 15,8 13,8 12,1 10,2 8,4 6,5 5,5 - - - - - -
A182 F22 Cl. 3 1.1 19,8 17,7 15,8 13,8 12,1 10,2 8,4 6,5 5,5 4,6 2,8 1,4 1,4 - -
A 352 LCC 1.2 19,8 17,7 15,8 13,8 12,1 10,2 8,4 - - - - - - - -
A 217 WC6 1.9 19,8 17,7 15,8 13,8 12,1 10,2 8,4 6,5 5,5 4,6 2,8 1,4 1,4 1,4 -
A 351 CF8M 2.2 19,0 16,2 14,8 13,7 12,1 10,2 8,4 6,5 5,5 4,6 2,8 1,4 - - -
A182 F316 2.2 19 16,2 14,8 13,7 12,1 10,2 8,4 6,5 5,5 4,6 2,8 - - - -

Class 300
Body material Material class Maximum allowable working pressure - in bar
Temperature 20 °C 100 °C 150 °C 200 °C 250 °C 300 °C 350 °C 400 °C 425 °C 450 °C 500 °C 538 °C 575 °C 600 °C 650 °C
A 350 LF2 1.1 51,1 46,6 45,1 43,8 41,9 39,8 37,6 34,7 28,8 - - - - - -
A 516 70 1.1 51,1 46,6 45,1 43,8 41,9 39,8 37,6 34,7 28,8 - - - - - -
A 216 WCB 1.1 51,1 46,6 45,1 43,8 41,9 39,8 37,6 34,7 28,8 - - - - - -
A 105 1.1 51,1 46,6 45,1 43,8 41,9 39,8 37,6 34,7 28,8 - - - - - -
A182 F22 Cl. 3 1.1 51,7 51,5 50,3 48,6 46,3 42,9 40,3 36,5 35,2 33,7 28,2 18,4 10,5 - -
A 352 LCC 1.2 51,7 51,5 50,2 48,6 46,3 42,9 40,0 - - - - - - - -
A 217 WC6 1.9 51,7 51,5 49,7 48,0 46,3 42,9 40,3 36,5 35,2 33,7 25,7 14,9 8,8 6,1 -
A 351 CF8M 2.2 49,6 42,2 38,5 35,7 33,4 31,6 30,3 29,4 29,1 28,8 28,2 25,2 - - -
A182 F316 2.2 49,6 42,2 38,5 35,7 33,4 31,6 30,3 29,4 29,1 28,8 28,2 - - - -

Class 600
Body material Material class Maximum allowable working pressure - in bar
Temperature 20 °C 100 °C 150 °C 200 °C 250 °C 300 °C 350 °C 400 °C 425 °C 450 °C 500 °C 538 °C 575 °C 600 °C 650 °C
A 350 LF2 1.1 102,1 93,2 90,2 87,6 83,9 79,6 75,1 69,4 57,5 - - - - - -
A 516 70 1.1 102,1 93,2 90,2 87,6 83,9 79,6 75,1 69,4 57,5 - - - - - -
A 216 WCB 1.1 102,1 93,2 90,2 87,6 83,9 79,6 75,1 69,4 57,5 - - - - - -
A 105 1.1 102,1 93,2 90,2 87,6 83,9 79,6 75,1 69,4 57,5 - - - - - -
A182 F22 Cl. 3 1.1 103,4 103 100,3 97,2 92,7 85,7 80,4 73,3 70 67,7 56,5 36,9 21,1 - -
A182 F91 1.15 103,4 103 100,3 97,2 92,7 85,7 80,4 73,3 70 67,7 56,5 50 47,9 39 19,9
A 352 LCC 1.2 103,4 103,0 100,3 97,2 92,7 85,7 80,0 - - - - - - - -
A 217 WC6 1.9 103,4 103,0 99,5 95,9 92,7 85,7 80,4 73,3 70,0 67,7 51,5 29,8 17,6 12,2 -
A182 F11 Cl. 2 1.9 103.4 103 99,5 95,9 92,7 85,7 80,4 73,3 70 67,7 51,5 29,8 17,6 12,2
A 351 CF8M 2.2 99,3 84,4 77,0 71,3 66,8 63,2 60,7 58,9 58,3 57,7 56,5 50,0 - - -
A182 F316 2.2 99,3 84,4 77 71,3 66,8 63,2 60,7 58,9 58,3 57,7 56,5 - -

Class 900
Body material Material class Maximum allowable working pressure - in bar
Temperature 20 °C 100 °C 150 °C 200 °C 250 °C 300 °C 350 °C 400 °C 425 °C 450 °C 500 °C 538 °C 575 °C 600 °C 650 °C
A 216 WCB 1.1 153,2 139,8 135,2 131,4 125,8 119,5 112,7 104,2 86,3 - - - - - -
A 105 1.1 153,2 139,8 135,2 131,4 125,8 118,5 112,7 104,2 86,3 - - - - - -
A182 F22 Cl. 3 1.1 155,1 154,6 150,6 145,8 139 128,6 120,7 109,8 105,1 101,4 84,7 55,3 31,6 - -
A182 F91 1.15 155.1 154.6 150.6 145.8 139 128.6 120,7 109,8 105,1 101,4 84,7 75,2 71,8 58,5 29,8
A 352 LCC 1.2 155,1 154,6 150,5 145,8 139 128,6 120,1 - - - - - - - -
A 217 WC6 1.9 155,1 154,4 149,2 143,9 139 128,6 120,7 109,8 105,1 101,4 77,2 44,7 26,4 18,3 -
A182 F11 Cl. 2 1.9 155,1 154,4 149,2 143,9 139 128,6 120,7 109,8 105,1 101,4 77,2 44,7 26,4 18,3
A 351 CF8M 2.2 148,9 126,6 115,5 107 100,1 94,9 91 88,3 87,4 86,5 84,7 75,2 - - -
A182 F316 2.2 148,9 126,6 115,5 107 100 94,9 91 88,3 87,4 86,5 84,7 - - - -

Class 1500
Body material Material class Maximum allowable working pressure - in bar
Temperature 20 °C 100 °C 150 °C 200 °C 250 °C 300 °C 350 °C 400 °C 425 °C 450 °C 500 °C 538 °C 575 °C 600 °C 650 °C
A 216 WCB 1.1 255,3 233 225,4 219 209,7 199,1 187,8 173,6 143,8 - - - - - -
A 105 1.1 255,3 233 225,4 219 209,7 199,1 187,8 173,6 143,8 - -
A182 F22 Cl. 3 1.1 258,6 257,6 250,8 243,4 231,8 214,4 201,1 183,1 175,1 169 140,9 92,2 52,6 - -
A182 F91 1.15 258,6 257,6 250,8 243,4 231,8 214,4 201,1 183,1 175,1 169 140,9 125,5 119,7 97,5 49,6
A 352 LCC 1.2 258,6 257,6 250,8 243,2 231,8 214,4 200,1 - - - - - - - -
A 217 WC6 1.9 258,6 257,4 248,7 239,8 231,8 214,4 201,1 183,1 175,1 169 128,6 74,5 44 30,5 -
A182 F11 Cl. 2 1.9 258,6 257,4 248,7 239,8 231,8 214,4 201,1 183,1 175,1 169 128,6 74,5 44 30,5
A 351 CF8M 2.2 248,2 211 192,5 178,3 166,9 158,1 151,6 147,2 145,7 144,2 140,9 125,5 - - -
A182 F316 2.2 248,2 211 192,5 178,3 166,9 158,1 151,6 147,2 145,7 144,2 140,9 - - - -

32 w w w. ar m atur ygroup. cz
GATE VALVES

Class 2500
Body material Material class Maximum allowable working pressure - in bar
Temperature 20 °C 100 °C 150 °C 200 °C 250 °C 300 °C 350 °C 400 °C 425 °C 450 °C 500 °C 538 °C 575 °C 600 °C 650 °C
A 105 1.1 425,5 388,3 375,6 365 349,5 331,8 313 289,3 239,7 - - - - - -
A182 F22 Cl. 3 1.1 430,9 429,4 418,2 405,4 386,2 357,1 335,3 304,9 291,6 281,8 235 153,7 87,7 - -
A182 F91 1.15 430,9 429,4 418,2 405,4 386,2 357,1 335,3 304,9 291,6 281,8 235 208,9 199,5 162,5 82,7
A182 F11 Cl. 2 1.9 430,9 429 414,5 399,6 386,2 357,1 335,3 304,9 291,6 281,8 214,4 124,1 73,4 50,9 -
A182 F316 2.2 413,7 351,6 320,8 297,2 278,1 263,5 252,7 245,3 242,9 240,4 235 - - - -

CERTIFICATION

Certificate acc. to Certificate acc. to Inspection certificate of Safety Inspection certificate of Safety
PED 97/23/EC for S33 P ED 97/23/EC for S43 Integrity Level (SIL) of S33 Integrity Level (SIL) of S43

QMS Certificate in welding acc. TA-Luft Certificate of emission Quality Management System Environmental Management
to EN ISO 3834-2 reduction from industrial valves acc. to EN ISO 9001:2008 System acc. to
in refineries EN ISO 14001:2004

Certificate of BS OHSAS ASME NPT Certificate ASME N Certificate

18001:2007

www.armaturygroup.cz
w w w. ar m atur ygroup. cz 33
 GATE VALVES

TYPE NUMBER COMPOSITION

Type number uniquely describes the valve.

Type number is fixed by the manufacturer (supplier).
Type number serves to customers in subsequent communication with the manufacturer (supplier) valve.

Manufacturer´s (Supplier´s) identification

Body material
Operation
Connection to piping

S33.11 DN 250 PN100 115 AG

NPS10 Class1500
Nominal pressure
Valve size
Sealing surface material
Body design
Valve type

Type Connection to piping

S33 – steel gate valve 1 – flanged ends
S43 – steel gate valve 2 – welded ends
3 – threaded ends
Body design - S33 4 – socked weldings ends
1 – y oke gate valve, flexible wedge, cast body
2 – y oke gate valve, solid wedge, cast body Operation
3–b  onnet gate valve, solid wedge, cast body 1 – handwheel
4 – y oke gate valve, solid wedge, fabricated body 2 – gear-box
C – control gate valves, special throttle disc 3 – electric actuator
4 – pneumatic actuator
Body design - S43 5 – bare stem
1–b  olted bonnet, forged body
3 – f ully welded gate valve, non-rising stem Body material
5–p  ressure seal bonnet, forged body 0 – stainless steel
C – control gate valves, special throttle disc 2 – alloy steel
3 – forged alloy steel
Sealing surface material 4 – forged carbon steel
1–1  3Cr x 13Cr 5 – cast carbon steel
2 – s tainless steel x stainless steel
3 – s tainless steel x stellit Manufacturer´s (Supplier´s) identification
5 – s tellit x stellit AG – ARMATURY Group a.s.
8–1  3Cr x stellit

Data mentioned in the catalogue are not subject to changes, for an order and delivery of the goods are obligatory the data mentioned in
respective specifications.

34 w w w. ar m atur ygroup. cz
STEEL GATE VALVES

HUTNÍ A SPECIÁLNÍ ARMATURY / METALLURGICAL AND SPECIAL VALVES

GLOBE AND CONTROL VALVES, LIFT CHECK VALVES VALVES FOR NUCLEAR POWER АРМАТУРЫ ДЛЯ МЕТАЛЛУРГИЧЕСКОГО ПРОИЗВОДСТВА

BALL VALVES WITH FLOATING BALL TRUNNION MOUNTED BALL VALVES GATE VALVES

CHECK VALVES EXTRACTION CHECK VALVES BUTTERFLY VALVES

Czech Republic
Production plant and Headquarters
Nádražní 129, 747 22 Dolní Benešov
tel.: +420/553 680 111
fax: +420/553 680 333
email: [email protected]

Slovakia
ARMATÚRY GROUP, s.r.o.
Registered office
Jánošíkova 264, 010 01 Žilina
tel.: +421/41/707 77 77
fax: +421/41/707 77 70
email: [email protected]

Austria
Armatury Group GmbH
ARMATURY Group a.s.
official representative for Austria
Attemsgasse 45/1/7
A-1220 Wien
mob.: +43 (0) 664 /88 51 33 33
tel: +43 (0) 1 / 20 21 985
fax: +43 (0) 1 / 20 21 985
e-mail: [email protected]

Germany
Armatury Group GmbH
ARMATURY Group a.s.
official representative for Germany
Technologie Centrum Bissendorf
Gewerbepark 18
49143 Bissendorf
mob.: +43 (0) 664 /88 51 33 33
tel: +49 (0) 5402-70-2532
fax:+49 (0) 5402-70-2531
e-mail: [email protected]

Russia
AO „ARMATURY Group a.s.“
3. ulice Tverskaya-Yamskaya, dům 31/35
125047 Moskva
tel./fax: +7/495 956 3335
email: [email protected]

China
ARMATURY GROUP Co., Ltd
Subsidiary company
Xinjing road 18
Zhangjiagang Economic & Technological
Development Zone
Jiangsu, China
mob. (China): +86 137 7326 6078
mob. (CZ): +420 606 713 721
email: [email protected]

www.armaturygroup.cz
Other business representatives abroad:
Poland, Norway, Turkey, Estonia, Romania,
Egypt, Iraq, Pakistan, India, China, Sudan,
Algeria and other countries.

The ARMATURY Group a.s. company reserves the right for changes of technical products-specifications,
and is not responsible for incidental misprints.

Issued in April 2017