Scribd
Upload
400 views1 page

Industrial Lathe Specifications

This document provides specifications for a THMT C6266 - 3000b/c centre lathe. The lathe has a swing diameter over the bed of 660mm, swing diameter in the gap of 900mm, and distance between centers of 3000mm. It can handle a variety of thread sizes and pitches in both metric and imperial units. The lathe also includes various accessories such as a 3 jaw chuck, 4 jaw chuck, and faceplate.

Uploaded by

kagiso kefetogile
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
400 views1 page

Industrial Lathe Specifications

This document provides specifications for a THMT C6266 - 3000b/c centre lathe. The lathe has a swing diameter over the bed of 660mm, swing diameter in the gap of 900mm, and distance between centers of 3000mm. It can handle a variety of thread sizes and pitches in both metric and imperial units. The lathe also includes various accessories such as a 3 jaw chuck, 4 jaw chuck, and faceplate.

Uploaded by

kagiso kefetogile
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

THMT C6266 - 3000b/c - Centre Lathe (660)

3 Jaw chuck Ø 315mm • 4 Jaw chuck Ø 400mm • Faceplate • 8 x Foot mounts


• Travelling steady & Fixed steady

Configeration:
Distance between centers: 3000mm Inch thread range & kind:
Max. swing diameter over bed: 660mm 7/16~80 T.P.I. (54 kinds)
Max. swing diameter in gap: 900mm Metric thread range & kind:
Width of bed: 400mm 0.45~120mm (54 kinds)
Max. size of tool shank (W x H): 25 x 25mm Diameter pitch range & kind:
Max. travel of cross slide: 368mm 7/8~160DP (42 kinds)
Max. travel of top slide: 230mm Module range & kind:
Spindle bore: Ø105mm 0.25 ~ 60MP (46 kinds)
Spindle speed range: 25~1600rpm Metric spindle longitudinal feed per revolution:
Cutting Thread, Feed range: Ø40mm x 12mm 0.044~1.48mm/rev (25 kinds)
Diameter pitch range: 0.25 ~ 60MP Inch spindle longitudinal feed per revolution:
Travel of tailstock sleeve: 235mm 0.0016498~0.05497” /rev (25 kinds)
Inside taper of tailstock sleeve: MT5 Metric spindle cross feed per revolution:
Power of main motor: 7.5kW (10PH) 0.022~0.74mm/rev (25 kinds)
Power of cooling pump: 0.09kW (1/8HP) Inch spindle cross feed per revolution:
Dimensions (L x W x H): 371/471x1230x160mm 0.0008326~0.02774” /rev (25 kinds)
Net weight of lathe: 3343/3710kg
Large screw size: Ø40mm x 2T.P.I. or
Ø40mm x 12mm

Centre Lathe
Turning Centre

You might also like