0% found this document useful (0 votes)
87 views8 pages

Product Specification 10Gbps CWDM BIDI Transceiver CLS10GCWBD10-XX/XX

This document provides specifications for Shenzhen C-Light Network Communication Co., Ltd.'s 10Gbps CWDM BIDI Transceiver. It can support up to 10Gbps data links over 18 channels in the CWDM spectrum from 1270nm to 1610nm. The transceiver uses a hot-pluggable SFP footprint and operates from 0-70 degrees Celsius. It provides electrical, optical, mechanical and regulatory compliance specifications.

Uploaded by

Osazuwa Omoigui
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
87 views8 pages

Product Specification 10Gbps CWDM BIDI Transceiver CLS10GCWBD10-XX/XX

This document provides specifications for Shenzhen C-Light Network Communication Co., Ltd.'s 10Gbps CWDM BIDI Transceiver. It can support up to 10Gbps data links over 18 channels in the CWDM spectrum from 1270nm to 1610nm. The transceiver uses a hot-pluggable SFP footprint and operates from 0-70 degrees Celsius. It provides electrical, optical, mechanical and regulatory compliance specifications.

Uploaded by

Osazuwa Omoigui
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 8

SHENZHEN C-LIGHT NETWORK COMMUNICATION CO., LTD.

Product Specification

10Gbps CWDM BIDI Transceiver

CLS10GCWBD10-XX/XX
V20191012

Product Features
l Up to 10Gbps data links
l Rx Sens: -14~-16dB on SMF
l 18CH CWDM wave BIDI
l Simplex LC Connector
l Hot-pluggable SFP footprint

l Same 3. 3V power supply Applications


l Operating temperature: 0~70°C

PART NUMBER WAVE LENGTH PART NUMBER WAVE LENGTH

CLS10GCWBD10-27/29 TX1270nm RX1290nm CLS10GCWBD10-27/29 TX1290nm RX1270nm

CLS10GCWBD10-31/33 TX1310nm RX1330nm CLS10GCWBD10-33/31 TX1330nm RX1310nm

CLS10GCWBD10-35/37 TX1350nm RX1370nm CLS10GCWBD10-37/35 TX1350nm RX1370nm

CLS10GCWBD10-39/41 TX1390nm RX1410nm CLS10GCWBD10-41/39 TX1410nm RX1390nm

CLS10GCWBD10-43/45 TX1430nm RX1450nm CLS10GCWBD10-45/43 TX1450nm RX1430nm

CLS10GCWBD10-47/49 TX1470nm RX1490nm CLS10GCWBD10-49/47 TX1490nm RX1470nm

CLS10GCWBD10-51/53 TX1510nm RX1530nm CLS10GCWBD10-53/51 TX1530nm RX1510nm

CLS10GCWBD10-55/57 TX1550nm RX1570nm CLS10GCWBD10-57/55 TX1570nm RX1550nm

WWW.C-LIGHT.COM Page 1
SHENZHEN C-LIGHT NETWORK COMMUNICATION CO., LTD.

CLS10GCWBD10-59/61 TX1590nm RX1610nm CLS10GCWBD10-61/59 TX1610nm RX1590nm

l RoHS √ 10GE CWDM

1. Product Description
TheCLS10GCWBD10-XX/XX series SFPs are small form factor pluggable (SFP)
transceivers compatible with multi-sourcing agreement (MSA). It is suitable for
Same-mode fiber (SMF) CWDM communications in 10Gbps.

2. Regulatory Compliance

C-light transceivers are Class 1 Laser Products comply with FDA regulations. Meet
Class 1 eye safety requirements of EN 60825 and the electrical safety requirements of
EN 60950.

3. Absolute Maximum Ratings

Parameter Symbol Min. Max. Unit


Supply Voltage VCC -0.5 3.6 V
Storage Temperature TS -40 85 °C
Operating Case Temperature TC 0 70 °C

4. Recommended Operating Conditions

Parameter Symbol Min. Typical Max. Unit

Operating Case Temperature TC 0 70 °C


Power Supply Voltage
VCC 3.15 3.3 3.45 V

Power Supply Current


ICC 300 mA

Data Rate 10G Bps

Max Power Budget on 9/125µm


PB max 14 16 dB
SMF

WWW.C-LIGHT.COM Page 2
SHENZHEN C-LIGHT NETWORK COMMUNICATION CO., LTD.

Max Link Length on 9/125µm


L max 10 km
SMF

5. Optical Characteristics

Typic
Parameter Symbol Min. Max. Unit
al
Transmitter
Centre Wavelength λc 1XX0-6.5 1XX0 1XX0+6.5 nm
Centre Wavelength Spacing 20 nm

Spectral Width (-20dB) σ 1 nm

Average Output Power Pout 0 5 dBm


Extinction Ratio ER 4 dB
Optical Rise/Fall Time tr/tf 2 ns
Receiver
Centre Wavelength λc 1XX0-6.5 1XX0 1XX0+6.5 nm
Receiver Sensitivity at 10G PIN -14 -16 dBm
Receiver Overload PMAX -3 dBm
LOS De-Assert LOSD -19 dBm
LOS Assert LOSA -22 dBm
LOS Hysteresis 0.5 5 dB

6. Electrical Characteristics

Parameter Symbol Min. Typical Max. Unit


Transmitter
Input Differential Impedance Zin 90 100 110 Ω
Data Input Swing Differential Vin 500 2400 mV
Tx-Dis Disable Vd 2.0 Vcc V
Tx-Dis Enable Ven 0 0.8 V
TX-Fault (Fault) 2.0 Vcc+0.3 V
TX-Fault (Normal) 0 0.8 V
Receiver
Data Output Swing Differential Vout 370 2000 mV
Rx-Los Fault Vlf 2.0 Vcc+0.3 V

WWW.C-LIGHT.COM Page 3
SHENZHEN C-LIGHT NETWORK COMMUNICATION CO., LTD.

Rx-Los Normal Vln 0 0+0.8 V

7. Pin Descriptions

Pin Symbol Description Ref.


1 VEET Transmitter Ground (Common with Receiver Ground) 6.1
2 TFAULT Transmitter Fault. Not supported.
3 TDIS Transmitter Disable. Laser output disabled on high or open. 6.2
4 MOD_DEF(2) Module Definition 2. Data line for Serial ID. 6.3
5 MOD_DEF(1) Module Definition 1. Clock line for Serial ID. 6.3
6 MOD_DEF(0) Module Definition 0. Grounded within the module. 6.3
7 Rate Select No connection required
Loss of Signal indication. Logic 0 indicates normal
8 LOS 6.4
operation.
9 VEER Receiver Ground (Common with Transmitter Ground) 6.1
10 VEER Receiver Ground (Common with Transmitter Ground) 6.1
11 VEER Receiver Ground (Common with Transmitter Ground) 6.1
12 RD- Receiver Inverted DATA out. AC Coupled.
13 RD+ Receiver Non-inverted DATA out. AC Coupled.
14 VEER Receiver Ground (Common with Transmitter Ground) 6.1

WWW.C-LIGHT.COM Page 4
SHENZHEN C-LIGHT NETWORK COMMUNICATION CO., LTD.

15 VCCR Receiver Power Supply


16 VCCT Transmitter Power Supply
17 VEET Transmitter Ground (Common with Receiver Ground) 6.1
18 TD+ Transmitter Non-Inverted DATA in. AC Coupled.
19 TD- Transmitter Inverted DATA in. AC Coupled.
20 VEET Transmitter Ground (Common with Receiver Ground) 6.1
Notes:
6.1 Circuit ground is internally isolated from chassis ground.
6.2 Laser output disabled on TDIS >2.0V or open, enabled on TDIS <0.8V.
6.3 Should be pulled up with 4.7k - 10kohms on host board to a voltage between 2.0V
and 3.6V. MOD_DEF(0) pulls line low to indicate module is plugged in.
6.4 LOS is open collector output. Should be pulled up with 4.7k -10kohms on host
board to a voltage between 2.0V and 3.6V. Logic 0 indicates normal operation; logic
1 indicates loss of signal.

8. EEPROM & DDM THRESHOLD

8.1 EEPROM
2 wire address 1010000X (A0hex)

0~95
Serial ID Defined by SFP MSA (96 bytes)
96~127
Vendor Speific (32 bytes)
128~255
Reserved (128 bytes)

8.2 DDM THRESHOLD

CLS10GCWBD10-XX/XX
Low Alarm Low Warn High Warn High Alarm
Temp -5℃ 0℃ 70℃ 75℃
Voltage 3V 3.1V 3.6V 3.7V
Tx Bias 15mA 20mA 80mA 85mA
Tx Power -8dBm -7dBm 4dBm 5dBm
Rx Power -18dBm -16dBm 1dBm 2dBm

WWW.C-LIGHT.COM Page 5
SHENZHEN C-LIGHT NETWORK COMMUNICATION CO., LTD.

9. Recommend Circuit

WWW.C-LIGHT.COM Page 6
SHENZHEN C-LIGHT NETWORK COMMUNICATION CO., LTD.

10. Mechanical Specifications

11. LABEL

C-LIGHT offers label OEM design and print.


Label barcode supports code128 and 2D barcode

WWW.C-LIGHT.COM Page 7
SHENZHEN C-LIGHT NETWORK COMMUNICATION CO., LTD.

SIZE: 30mm * 9mm

Ordering Information

Fiber Optical
Part No. Data Rate DDM TX/RX Dist. Temp.
Type Interface
CLS10GCWBD10-XX/XX 10Gbps yes CWDM SMF 10km 0~70℃ BiDi LC
Wave 1XX0nm =1270nm,1290nm,1310nm, ...1590nm,1610nm
Tx wave = Rx wave

VERSION UPDATE:

VERSION NO. DATE UPDATED INFORMATION


V20191012 20191012 1.NEW RELEASED

NOTICE:

C-LIGHT reserves the right to make changes to this product in this specification
without notice, in order to improve product performance.

CONTACT:
Shenzhen C-Light network communication co., Ltd
4F East, Building 1, Shunheda Factory Plant, Liuxiandong industrial park,
Xili, Nanshan Dist, Shenzhen PR. China
Tel: 86-755-2778-9180 Fax: 86-755-2778-9174
E-mail: [email protected] http://www.c-light.com

WWW.C-LIGHT.COM Page 8

You might also like