Scribd
Upload
348 views2 pages

DELTA IA-HMI Delta-DVP-TCP-IP CM EN 20160122

This document provides information for connecting a Delta HMI to a Delta DVP TCP/IP controller. It lists the default factory settings for the controller IP address, COM port, and station number. It also specifies the control and status areas in registers D0 and D10. Connection can be made with either a standard jumper cable or network cable. The document defines the valid read and write ranges for various register and bit types like X, Y, M, S, T, C, and D registers. Addresses must be multiples of 16.

Uploaded by

ryo
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
348 views2 pages

DELTA IA-HMI Delta-DVP-TCP-IP CM EN 20160122

This document provides information for connecting a Delta HMI to a Delta DVP TCP/IP controller. It lists the default factory settings for the controller IP address, COM port, and station number. It also specifies the control and status areas in registers D0 and D10. Connection can be made with either a standard jumper cable or network cable. The document defines the valid read and write ranges for various register and bit types like X, Y, M, S, T, C, and D registers. Addresses must be multiples of 16.

Uploaded by

ryo
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

Series HMI Connection Manual

Delta DVP TCP/IP


HMI Factory Setting:

Controller IP Address: 192.168.0.1

Controller COM Port: 502

Controller Station Number: 1

Control Area / Status Area: D0/D10

Connection

Standard Jumper Cable / Network Cable without jumper (Auto-detected by HMI)

Definition of PLC Read/Write Address

a. Registers
Format
Type Read/Write Range Data Length Note
Word No. (n)

X_Data Xn X0 – X360 Word Octal, 1

Y_Data Yn Y0 – Y360 Word Octal, 1

M0 – M1520, M1536 - Word 1


M_Data Mn
M4080

S_Data Sn S0 – S1008 Word 1

T_Register Tn T0 – T255 Word

C_Register Cn C0 – C199 Word

D_Register Dn D0 – D11999 Word

HC_Register Cn C200 – C255 Word

b. Contacts
Format
Type Read/Write Range Note
Bit No. (b)

X_Data Xb X0 – X377

Y_Data Yb Y0 – Y377

M_Data Mb M0 – M4080

S_Data Sb S0 – S1023

T_Coil Tb T0 – T255

V1.03 Revision January, 2016


Series HMI Connection Manual

Format
Type Read/Write Range Note
Bit No. (b)

C_Coil Cb C0 – C255

D_Register Dn.b D0.0 – D11999.15

NOTE

1) Device address must be a multiple of 16

2) The effective addresses of D_Register Dn are 2 blocks: D0~4095, D4096~11999,


“Multiple Duplicate” function is not provided for different block.

V1.03 Revision January, 2016

You might also like